You should run "git-update-server-info" in pub/scm/linux/kernel/git/jgarzik/libata-dev.git. info/refs disagrees with refs/heads/* . Luben --- Jeff Garzik <jeff@xxxxxxxxxx> wrote: > > [ I just sent this upstream to Andrew and Linus ] > > Now that I have nailed down the corruption problem, I can attend to > this... Fun stuff: > > * port multiplier support (like an ethernet hub, only dumber) > > * Asynchronous notification -- finally userspace CD-ROM polling can go away! > (NOTE: waiting on James B to apply the piece that actually makes this > work...) > > * Alan continues to hammer out edge cases in generic ATA support. An > amazing amount of ancient and/or obscure hardware works with libata thanks to him :) > > * Turn on ACPI by default (watch for bug reports!). This should make > suspend/resume work a lot better. > > * New drivers for embedded ATA chips. > > > Please pull from 'upstream-linus' branch of > master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus > > to receive the following updates: > > Documentation/kernel-parameters.txt | 8 +- > drivers/ata/Kconfig | 59 ++- > drivers/ata/Makefile | 8 +- > drivers/ata/ahci.c | 451 +++++++--- > drivers/ata/ata_generic.c | 16 +- > drivers/ata/ata_piix.c | 71 +- > drivers/ata/libata-acpi.c | 165 +++- > drivers/ata/libata-core.c | 1329 ++++++++++++++++++---------- > drivers/ata/libata-eh.c | 922 ++++++++++++++------ > drivers/ata/libata-pmp.c | 1191 +++++++++++++++++++++++++ > drivers/ata/libata-scsi.c | 496 +++++++---- > drivers/ata/libata-sff.c | 69 +- > drivers/ata/libata.h | 41 +- > drivers/ata/pata_acpi.c | 395 ++++++++ > drivers/ata/pata_ali.c | 17 +- > drivers/ata/pata_amd.c | 43 +- > drivers/ata/pata_artop.c | 20 +- > drivers/ata/pata_at32.c | 441 +++++++++ > drivers/ata/pata_atiixp.c | 15 +- > drivers/ata/pata_bf54x.c | 1627 ++++++++++++++++++++++++++++++++++ > drivers/ata/pata_cmd640.c | 4 +- > drivers/ata/pata_cmd64x.c | 43 +- > drivers/ata/pata_cs5520.c | 47 +- > drivers/ata/pata_cs5530.c | 4 +- > drivers/ata/pata_cs5535.c | 4 +- > drivers/ata/pata_cypress.c | 4 +- > drivers/ata/pata_efar.c | 11 +- > drivers/ata/pata_hpt366.c | 4 +- > drivers/ata/pata_hpt37x.c | 28 +- > drivers/ata/pata_hpt3x2n.c | 11 +- > drivers/ata/pata_hpt3x3.c | 10 +- > drivers/ata/pata_icside.c | 39 +- > drivers/ata/pata_isapnp.c | 8 +- > drivers/ata/pata_it8213.c | 11 +- > drivers/ata/pata_it821x.c | 17 +- > drivers/ata/pata_ixp4xx_cf.c | 24 +- > drivers/ata/pata_jmicron.c | 24 +- > drivers/ata/pata_legacy.c | 27 +- > drivers/ata/pata_marvell.c | 12 +- > drivers/ata/pata_mpc52xx.c | 9 +- > drivers/ata/pata_mpiix.c | 25 +- > drivers/ata/pata_netcell.c | 5 +- > drivers/ata/pata_ns87410.c | 11 +- > drivers/ata/pata_ns87415.c | 467 ++++++++++ > drivers/ata/pata_oldpiix.c | 11 +- > drivers/ata/pata_opti.c | 11 +- > drivers/ata/pata_optidma.c | 26 +- > drivers/ata/pata_pcmcia.c | 16 +- > drivers/ata/pata_pdc2027x.c | 114 ++-- > drivers/ata/pata_pdc202xx_old.c | 23 +- > drivers/ata/pata_platform.c | 16 +- > drivers/ata/pata_qdi.c | 15 +- > drivers/ata/pata_radisys.c | 4 +- > drivers/ata/pata_rz1000.c | 13 +- > drivers/ata/pata_sc1200.c | 4 +- > drivers/ata/pata_scc.c | 66 +- > drivers/ata/pata_serverworks.c | 8 +- > drivers/ata/pata_sil680.c | 11 +- > drivers/ata/pata_sis.c | 33 +- > drivers/ata/pata_sl82c105.c | 11 +- > drivers/ata/pata_triflex.c | 11 +- > drivers/ata/pata_via.c | 16 +- > drivers/ata/pata_winbond.c | 13 +- > drivers/ata/pdc_adma.c | 103 ++- > drivers/ata/sata_inic162x.c | 34 +- > drivers/ata/sata_mv.c | 68 +- > drivers/ata/sata_nv.c | 53 +- > drivers/ata/sata_promise.c | 27 +- > drivers/ata/sata_qstor.c | 17 +- > drivers/ata/sata_sil.c | 53 +- > drivers/ata/sata_sil24.c | 341 ++++++-- > drivers/ata/sata_sis.c | 2 - > drivers/ata/sata_svw.c | 14 +- > drivers/ata/sata_sx4.c | 25 +- > drivers/ata/sata_uli.c | 16 +- > drivers/ata/sata_via.c | 35 +- > drivers/ata/sata_vsc.c | 16 +- > drivers/scsi/ipr.c | 19 +- > drivers/scsi/libsas/sas_ata.c | 11 +- > include/asm-generic/libata-portmap.h | 5 - > include/linux/ata.h | 116 +++- > include/linux/libata.h | 320 +++++-- > 82 files changed, 7866 insertions(+), 2064 deletions(-) > create mode 100644 drivers/ata/libata-pmp.c > create mode 100644 drivers/ata/pata_acpi.c > create mode 100644 drivers/ata/pata_at32.c > create mode 100644 drivers/ata/pata_bf54x.c > create mode 100644 drivers/ata/pata_ns87415.c > > Alan Cox (22): > libata: Correct IORDY handling > libata-core: Document some limits/assumptions about ID_ATA > libata: Note that our cache flush code needs fixing up > pata_cmd64x: Set up MWDMA modes properly > [libata] add ACPI cable detect API > libata pata_amd: ACPI checks for 80wire cable > libata pata_via: ACPI checks for 80wire cable > libata: Switch most of the remaining SFF drivers to ata_sff_port_start > libata-portmap: Remove unused definitions > libata: Spot bridge chips > libata: Strict checking for identify reporting > libata: Update experimental tags to reflect reality better > pdc2027x: Switch properly to ioread/iowrite > pata_atiixp: Audit notes on locking > pata_pdc202xx_old MWDMA fixes, and notes > pata_ns87415: Initial cut at 87415/87560 IDE support > libata: Fix HPA handling regression > libata: Add a drivers/ide style DMA disable > libata: correct handling of SRST reset sequences > libata_scsi: Fix ATAPI transfer lengths > libata-core: Expose gtm methods for driver use > pata_acpi: ACPI driver support > > Albert Lee (2): > libata: move ata_altstatus() to pio data xfer functions > libata: pata_pdc2027x PLL detection minor cleanup > > Andrew Morton (1): > libata-add-irq_flags-to-struct-pata_platform_info-fix > > Boaz Harrosh (2): > libata-scsi: Remove !use_sg code paths > libata-scsi: convert to use the data buffer accessors > > Christian Lamparter (1): > ata_piix: disallow UDMA 133 on ICH5 & ICH7 > > Dave Jones (1): > libata: correct kernel parameter in documentation. > > David Milburn (1): > libata-core: blacklist HITACHI HDS drives using wildcard blacklist matching > > Jason Gaston (2): > ata_piix: replace spaces with tabs > ahci: RAID mode SATA patch for Intel Tolapai > > Jeff Garzik (14): > [libata] pdc_adma: convert to new exception handling (EH) framework > [libata] Remove ->irq_ack() hook, and ata_dummy_irq_on() > [libata] Remove ->port_disable() hook > [libata] ata_piix: Use more-robust form of array initialization > [libata] blacklist Maxtor*BANC* using new wildcard blacklist matching > [libata] SCSI: support INQUIRY page 89h (ATA info page) > [libata] Slightly improved no-op REQUEST SENSE, SEND DIAGNOSTIC > [libata] SCSI: improve FORMAT UNIT; minor code cleanups > [libata] SCSI: clean up R/W recovery mode page > [libata] SCSI: simulator version, not device version, belongs in VPD > [libata] AHCI: enable AHCI mode, before using AHCI reset > [libata] ata_piix: add HP compaq laptop to short cable list > [libata] Turn on ACPI by default > [libata] struct pci_dev related cleanups > > Kristen Carlson Accardi (4): > [libata] check for SATA async notify support > [libata] ahci: send event when AN received > ahci: Store interrupt value > ata: increase allowed config flags > > Kristoffer Nyborg Gregertsen (1): > AVR32 PATA driver > > Mark Lord (1): > libata: add support for ATA_16 on ATAPI > > Matthew Garrett (1): > libata: Integrate ACPI-based PATA/SATA hotplug - version 5 > > Paolo Ornati (1): > libata: blacklist NCQ on Seagate Barracuda ST380817AS > > Peer Chen (1): > ahci: Add MCP79 support to AHCI driver > > Robert Hancock (1): > libata: add human-readable error value decoding > > Satyam Sharma (1): > libata: Fix build failure on ppc64 drivers/ata/pata_scc.c > > Sonic Zhang (1): > libata driver for bf548 on chip ATAPI controller. > > Tejun Heo (61): > libata-link: introduce ata_link > libata-link: implement and use link/device iterators > libata-link: linkify PHY-related functions > libata-link: linkify EH action helpers > libata-link: linkify reset > libata-link: linkify config/EH related functions > libata-link: make two port flags HRST_TO_RESUME and SKIP_D2H_BSY link flags > libata-link: separate out link initialization functions > libata-link: implement ata_link_abort() > libata-link: add PMP links > libata-link: update ata_scsi_error() to handle PMP links > libata-link: update EH to deal with PMP links > libata-link: update hotplug to handle PMP links > libata-link: update Power Management to handle PMP links > libata: use ata_port_printk() in ata_wait_idle() > libata: add printf format attribute to ehi desc functions > libata: implement and use ata_port_desc() to report port configuration > libata: move EH repeat reporting into ata_eh_report() > libata: move ata_id_n_sectors() upward > libata: clean up read/set native_max address functions > libata: remiplement ata_hpa_resize() > ahci: reimplement port_map handling > libata: update ata_dev_try_classify() arguments > libata: assume ATA_DEV_ATA on diagnostic failure > libata: misc updates for AN > libata-pmp-prep: add PMP related constants, fields, ops and update helpers > libata-pmp-prep: add @new_class to ata_dev_revalidate() > libata-pmp-prep: make a number of functions global to libata > libata-pmp-prep: implement ops->qc_defer() > libata-pmp-prep: implement qc_defer helpers > libata-pmp-prep: implement ATA_LFLAG_NO_SRST, ASSUME_ATA and ASSUME_SEMB > libata-pmp-prep: implement ATA_LFLAG_NO_RETRY > libata-pmp-prep: implement ATA_LFLAG_DISABLED > libata-pmp-prep: implement EH fast-fail path > libata-pmp-prep: implement ATA_HORKAGE_SKIP_PM > libata-pmp-prep: implement sata_async_notification() > libata: fix ata_set_max_sectors() > sata_via: kill SATA_PATA_SHARING register handling > libata: update spurious NCQ completion blacklist > libata-pmp: update ata_eh_reset() for PMP > libata-pmp: implement Port Multiplier support > libata-pmp: hook PMP support and enable it > libata-pmp: extend ACPI support to cover PMP > libata-pmp: implement qc_defer for command switching PMP support > sata_sil24: implement PMP support > sata_sil24: implement PORT_RST > ahci: implement PMP support > ahci: move host flags over to pi.private_data > ahci: implement AHCI_HFLAG_NO_PMP > libata: add HDT722516DLA380 to NCQ blacklist > libata: add ST9160821AS / 3.ALD to NCQ blacklist > pata_jmicron: match vendor and class code only > libata: clear ehi description after initial host report > libata: skip suppress reporting if ATA_EHI_QUIET > libata: wrap schedule_timeout_uninterruptible() in loop > ahci: kill leftover from enabling NCQ over PMP > ahci: clean up PORT_IRQ_BAD_PMP enabling > ahci: fix notification handling > libata: add @timeout to ata_exec_internal[_sg]() > libata: implement ATA_PFLAG_RESETTING > libata: use ata_exec_internal() for PMP register access > > [patch snipped due to size; grab it from git] > > - > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html