On Tue, 20 Jun 2006, David Greaves wrote:
Justin Piszcz wrote:
Dave, what is the make/model of the drives you get errors with by the
way?
On Tue, 20 Jun 2006, David Greaves wrote:
[Some email archaeology later]
Back in March I was running 2.6.16 (with the opcode patch) and I sent an
email with the following info:
dmesg:
ata1: translated op=0x28 cmd=0x25 ATA stat/err 0x51/04 to SCSI
SK/ASC/ASCQ 0xb/00/00
ata1: status=0x51 { DriveReady SeekComplete Error }
ata1: error=0x04 { DriveStatusError }
Model Family: Maxtor DiamondMax 10 family
Device Model: Maxtor 6B200M0
Serial Number: B4038RRH
Firmware Version: BANC1980
this is sata_sil
Another machine has :
Device Model: SAMSUNG SP2504C
Serial Number: S09QJ10Y720963
Firmware Version: VT100-33
User Capacity: 250,059,350,016 bytes
running through sata_via
that's running 2.6.16.18 and just gives:
ata1: PIO error
ata1: status=0x50 { DriveReady SeekComplete }
David
--
-
: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
What model SiL? Perhaps the kernel folk could ignore that error on our
chipset.
0000:02:03.0 RAID bus controller: Silicon Image, Inc. SiI 3112
[SATALink/SATARaid] Serial ATA Controller (rev 02)
-
: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
