Linux Kernel I2C

• Thread Index

• Re: [PATCH v9] i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 09/12] i2c: of-prober: Add regulator support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: hwmon: pmbus: add ti tps25990 documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v9] i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v8] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 06/12] gpiolib: Add gpio_get_property_name_length()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 09/12] i2c: of-prober: Add regulator support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: xiic: Wait for TX empty to avoid missed TX NAKs
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Xilinx I2C driver fixes
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 3/5] i2c: piix4: Add ACPI support for ASF SMBus device
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v4 8/8] MAINTAINERS: Add AMD ASF driver entry
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v4 5/8] i2c: amd-asf: Add i2c_algorithm operations to support AMD ASF with SMBus
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v4 7/8] i2c: amd-asf: Clear remote IRR bit to get successive interrupt
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v4 6/8] i2c: amd-asf: Add routine to handle the ASF slave process
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v4 4/8] i2c: amd-asf: Add ACPI support for AMD ASF Controller
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v4 3/8] i2c: piix4: Export i2c_piix4 driver functions as library
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v4 1/8] i2c: piix4: Change the signature of piix4_transaction function
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v4 2/8] i2c: piix4: Move i2c_piix4 macros and structures to common header
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v4 0/8] Introduce initial AMD ASF Controller driver support
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• RE: [PATCH v2 0/2] Xilinx I2C driver fixes
  • From: "Guntupalli, Manikanta" <manikanta.guntupalli@xxxxxxx>
• Re: [PATCH V2 0/3] Add atomic transfer support to i2c-cadence
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3] i2c: aspeed: Update the stop sw state when the bus recovery occurs
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v1 0/3] i2c: designware: Cleanups (part 3)
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• RE: [PATCH v9] i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
  • From: Liu Kimriver/刘金河 <kimriver.liu@xxxxxxxxxxxx>
• [PATCH V2 3/3] i2c: cadence: Add atomic transfer support for controller version 1.4
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• [PATCH V2 2/3] i2c: cadence: Split cdns_i2c_master_xfer for Atomic Mode
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• [PATCH V2 1/3] i2c: cadence: Relocate cdns_i2c_runtime_suspend and cdns_i2c_runtime_resume to facilitate atomic mode
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• [PATCH V2 0/3] Add atomic transfer support to i2c-cadence
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• Re: [PATCH v9] i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2] i2c: omap: Fix standard mode false ACK readings
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3] i2c: aspeed: Update the stop sw state when the bus recovery occurs
  • From: Tommy Huang <tommy_huang@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] hwmon: (pmbus/tps25990): add initial support
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: [PATCH v7 1/2] i2c: octeon: refactor common i2c operations
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH v9] i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
  • From: Kimriver Liu <kimriver.liu@xxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c: cadence: Add atomic transfer support for controller version 1.4
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v6 06/12] gpiolib: Add gpio_get_property_name_length()
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v7 10/10] arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v7 09/10] platform/chrome: Introduce device tree hardware prober
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v7 08/10] i2c: of-prober: Add GPIO support to simple helpers
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v7 07/10] i2c: of-prober: Add simple helpers for regulator support
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v7 06/10] i2c: Introduce OF component probe function
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v7 05/10] i2c: core: Remove extra space in Makefile
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v7 04/10] regulator: Add of_regulator_get_optional() for pure DT regulator lookup
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v7 03/10] regulator: Split up _regulator_get()
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v7 02/10] of: base: Add for_each_child_of_node_with_prefix()
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v7 01/10] of: dynamic: Add of_changeset_update_prop_string
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v7 00/10] platform/chrome: Introduce DT hardware prober
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• RE: [PATCH 3/3] i2c: cadence: Add atomic transfer support for controller version 1.4
  • From: "Guntupalli, Manikanta" <manikanta.guntupalli@xxxxxxx>
• Re: [PATCH v6 09/12] i2c: of-prober: Add regulator support
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• ODP: [PATCH v2] pca954x: Reset if channel select fails
  • From: "Wojciech Siudy (Nokia)" <wojciech.siudy@xxxxxxxxx>
• RE: [PATCH v8] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Liu Kimriver/刘金河 <kimriver.liu@xxxxxxxxxxxx>
• Re: [PATCH v6 09/12] i2c: of-prober: Add regulator support
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [Patch v5 02/12] dt-bindings: dma: Add lpc32xx DMA mux binding
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: support gpio-binding for SMBAlerts
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 3/3] hwmon: (pmbus/tps25990): add initial support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v1 3/3] i2c: designware: Use pci_get_drvdata()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/3] i2c: designware: Uninline i2c_dw_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 0/3] i2c: designware: Cleanups (part 3)
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/3] i2c: designware: Propagate firmware node
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] hwmon: (pmbus/core) add POWER_GOOD signal limits support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Adjust LOW period of the SCL clock
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 1/5] mfd: add Congatec Board Controller mfd driver
  • From: Thomas Richard <thomas.richard@xxxxxxxxxxx>
• [PATCH -next v3 05/15] HID: mcp2221: Use devm_hid_hw_start_and_open in mcp2221_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v3 04/15] HID: mcp2200: Use devm_hid_hw_start_and_open in mcp2200_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v3 12/15] hwmon: (gigabyte_waterforce) Use devm_hid_hw_start_and_open in waterforce_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v3 13/15] hwmon: (nzxt-kraken2) Use devm_hid_hw_start_and_open in kraken2_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v3 11/15] hwmon: (corsair-psu) Use devm_hid_hw_start_and_open in corsairpsu_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v3 14/15] hwmon: (nzxt-kraken3) Use devm_hid_hw_start_and_open in kraken3_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v3 15/15] hwmon: (nzxt-smart2) Use devm_hid_hw_start_and_open in nzxt_smart2_hid_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v3 09/15] hwmon: (asus_rog_ryujin) Use devm_hid_hw_start_and_open in rog_ryujin_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v3 10/15] hwmon: (corsair-cpro) Use devm_hid_hw_start_and_open in ccp_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v3 07/15] HID: playstation: Use devm_hid_hw_start_and_open in ps_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v3 08/15] hwmon: (aquacomputer_d5next) Use devm_hid_hw_start_and_open in aqc_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v3 06/15] HID: nintendo: Use devm_hid_hw_start_and_open in nintendo_hid_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v3 00/15] HID: convert to devm_hid_hw_start_and_open()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v3 03/15] HID: ft260: Use devm_hid_hw_start_and_open in ft260_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v3 01/15] HID: core: Use devm_add_action_or_reset helper to manage hid resources
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v3 02/15] HID: cp2112: Use devm_hid_hw_start_and_open in cp2112_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• Re: [PATCH] i2c: ljca: Remove unused "target_addr" parameter
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 2/3] hwmon: (pmbus/core) add POWER_GOOD signal limits support
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: [PATCH 2/3] hwmon: (pmbus/core) add POWER_GOOD signal limits support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: cadence: Split cdns_i2c_master_xfer for Atomic Mode
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 1/3] i2c: cadence: Relocate cdns_i2c_runtime_suspend and cdns_i2c_runtime_resume to facilitate atomic mode
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 3/3] i2c: cadence: Add atomic transfer support for controller version 1.4
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v8] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [PATCH v8] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Liu Kimriver/刘金河 <kimriver.liu@xxxxxxxxxxxx>
• RE: [PATCH v8] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Liu Kimriver/刘金河 <kimriver.liu@xxxxxxxxxxxx>
• Re: [PATCH v8] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v8] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] hwmon: (pmbus/tps25990): add initial support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• RE: [PATCH v8] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Liu Kimriver/刘金河 <kimriver.liu@xxxxxxxxxxxx>
• Re: [PATCH v2 4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
  • From: neil.armstrong@xxxxxxxxxx
• RE: [PATCH v8] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Liu Kimriver/刘金河 <kimriver.liu@xxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: hwmon: pmbus: add ti tps25990 documentation
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: [PATCH v2 4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v2 4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v2 3/4] soc: qcom: geni-se: Export function geni_se_clks_off()
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH 3/3] hwmon: (pmbus/tps25990): add initial support
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: [PATCH v5 0/1] I2C controller support for KEBA PLCs
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v8] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v8] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] hwmon: (pmbus/tps25990): add initial support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: hwmon: pmbus: add ti tps25990 documentation
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH dt-schema] schemas: i2c: add optional GPIO binding for SMBALERT# line
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] hwmon: (pmbus/core) add POWER_GOOD signal limits support
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• [PATCH v8] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Kimriver Liu <kimriver.liu@xxxxxxxxxxxx>
• Re: [PATCH v4 3/3] i2c: jz4780: Use dev_err_probe()
  • From: Rong Qianfeng <11065417@xxxxxxxx>
• RE: [PATCH v7] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Liu Kimriver/刘金河 <kimriver.liu@xxxxxxxxxxxx>
• Re: [PATCH v2 0/7] i2c: npcm: Bug fixes read/write operation, checkpatch
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v2 6/7] i2c: npcm: use i2c frequency table
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH 3/3] hwmon: (pmbus/tps25990): add initial support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v8 0/6] i2c-i801 / dell-lis3lv02d: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-lis3lv02d
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 4/4] i2c: imx: prevent rescheduling in non dma mode
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: i2c-sprd: convert to YAML
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2] pca954x: Reset if channel select fails
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: ismt: kill transaction in hardware on timeout
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH V4] i2c: imx-lpi2c: add eDMA mode support for LPI2C
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH] i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH 3/5] i2c: Congatec Board Controller i2c bus driver
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v4 3/3] i2c: jz4780: Use dev_err_probe()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 0/7] i2c: designware: Group all DesignWare drivers under a single option
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 7/7] i2c: designware: Group all DesignWare drivers under a single option
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3] i2c: rcar: tidyup priv->devtype handling on rcar_i2c_probe()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH -next v2 10/15] hwmon: (corsair-cpro) Use devm_hid_hw_start_and_open in ccp_probe()
  • From: Marius Zachmann <mail@xxxxxxxxxxxxxxxxx>
• Re: [PATCH dt-schema] schemas: i2c: add optional GPIO binding for SMBALERT# line
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH -next v2 13/15] hwmon: (nzxt-kraken2) Use devm_hid_hw_start_and_open in kraken2_probe()
  • From: Jonas Malaco <jonas@xxxxxxxxxxxx>
• Re: [PATCH 2/3] hwmon: (pmbus/core) add POWER_GOOD signal limits support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH -next v2 14/15] hwmon: (nzxt-kraken3) Use devm_hid_hw_start_and_open in kraken3_probe()
  • From: Aleksa Savic <savicaleksa83@xxxxxxxxx>
• Re: [PATCH -next v2 12/15] hwmon: (gigabyte_waterforce) Use devm_hid_hw_start_and_open in waterforce_probe()
  • From: Aleksa Savic <savicaleksa83@xxxxxxxxx>
• Re: [PATCH v7] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH -next v2 09/15] hwmon: Use devm_hid_hw_start_and_open in rog_ryujin_probe()
  • From: Aleksa Savic <savicaleksa83@xxxxxxxxx>
• Re: [PATCH -next v2 08/15] hwmon: (aquacomputer_d5next) Use devm_hid_hw_start_and_open in aqc_probe()
  • From: Aleksa Savic <savicaleksa83@xxxxxxxxx>
• Re: [PATCH -next v2 15/15] hwmon: (nzxt-smart2) Use devm_hid_hw_start_and_open in nzxt_smart2_hid_probe()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH -next v2 14/15] hwmon: (nzxt-kraken3) Use devm_hid_hw_start_and_open in kraken3_probe()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH -next v2 13/15] hwmon: (nzxt-kraken2) Use devm_hid_hw_start_and_open in kraken2_probe()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH -next v2 12/15] hwmon: (gigabyte_waterforce) Use devm_hid_hw_start_and_open in waterforce_probe()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH -next v2 11/15] hwmon: (corsair-psu) Use devm_hid_hw_start_and_open in corsairpsu_probe()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH -next v2 10/15] hwmon: (corsair-cpro) Use devm_hid_hw_start_and_open in ccp_probe()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH -next v2 09/15] hwmon: Use devm_hid_hw_start_and_open in rog_ryujin_probe()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH -next v2 08/15] hwmon: (aquacomputer_d5next) Use devm_hid_hw_start_and_open in aqc_probe()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/3] hwmon: (pmbus/core) add POWER_GOOD signal limits support
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• [PATCH 3/3] hwmon: (pmbus/tps25990): add initial support
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• [PATCH 0/3] hwmon: pmbus: add tps25990 efuse support
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: hwmon: pmbus: add ti tps25990 documentation
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: [PATCH dt-schema] schemas: i2c: add optional GPIO binding for SMBALERT# line
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v7] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Liu Kimriver/刘金河 <kimriver.liu@xxxxxxxxxxxx>
• Re: [PATCH dt-schema] schemas: i2c: add optional GPIO binding for SMBALERT# line
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH dt-schema] schemas: i2c: add optional GPIO binding for SMBALERT# line
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v7] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH dt-schema] schemas: i2c: add optional GPIO binding for SMBALERT# line
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 7/7] i2c: designware: Group all DesignWare drivers under a single option
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH V2] i2c: imx-lpi2c: add target mode support
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 0/7] i2c: npcm: Bug fixes read/write operation, checkpatch
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 6/7] i2c: npcm: use i2c frequency table
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 7/7] i2c: designware: Group all DesignWare drivers under a single option
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v1] i2c: imx: Convert comma to semicolon
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• Re: [PATCH v2 3/4] soc: qcom: geni-se: Export function geni_se_clks_off()
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• Re: [PATCH v2 7/7] i2c: designware: Group all DesignWare drivers under a single option
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• [PATCH] i2c: support gpio-binding for SMBAlerts
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH dt-schema] schemas: i2c: add optional GPIO binding for SMBALERT# line
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/7] i2c: npcm: use i2c frequency table
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] i2c: testunit: improve error handling for GPIO
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v4 3/3] i2c: jz4780: Use dev_err_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 3/3] i2c: jz4780: Use dev_err_probe()
  • From: Rong Qianfeng <11065417@xxxxxxxx>
• Re: [PATCH v2 4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH v4 3/3] i2c: jz4780: Use dev_err_probe()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH v1] i2c: imx: Convert comma to semicolon
  • From: Shen Lichuan <shenlichuan@xxxxxxxx>
• RE: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Liu Kimriver/刘金河 <kimriver.liu@xxxxxxxxxxxx>
• [PATCH v3] i2c: rcar: tidyup priv->devtype handling on rcar_i2c_probe()
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH v6 00/12] platform/chrome: Introduce DT hardware prober
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH v6 08/12] i2c: Introduce OF component probe function
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH v6 06/12] gpiolib: Add gpio_get_property_name_length()
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH v6 05/12] regulator: Do pure DT regulator lookup in of_regulator_bulk_get_all()
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH V2] i2c: imx-lpi2c: add target mode support
  • From: Carlos Song <carlos.song@xxxxxxx>
• [PATCH v7] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Kimriver Liu <kimriver.liu@xxxxxxxxxxxx>
• Re: [PATCH v2 6/7] i2c: npcm: use i2c frequency table
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v2 2/7] i2c: npcm: correct the read/write operation procedure
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v2 4/7] i2c: npcm: Modify timeout evaluation mechanism
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• RE: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Liu Kimriver/刘金河 <kimriver.liu@xxxxxxxxxxxx>
• [PATCH -next v2 15/15] hwmon: (nzxt-smart2) Use devm_hid_hw_start_and_open in nzxt_smart2_hid_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v2 08/15] hwmon: (aquacomputer_d5next) Use devm_hid_hw_start_and_open in aqc_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v2 09/15] hwmon: Use devm_hid_hw_start_and_open in rog_ryujin_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v2 10/15] hwmon: (corsair-cpro) Use devm_hid_hw_start_and_open in ccp_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v2 07/15] HID: playstation: Use devm_hid_hw_start_and_open in ps_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v2 05/15] HID: mcp2221: Use devm_hid_hw_start_and_open in mcp2221_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v2 14/15] hwmon: (nzxt-kraken3) Use devm_hid_hw_start_and_open in kraken3_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v2 06/15] HID: nintendo: Use devm_hid_hw_start_and_open in nintendo_hid_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v2 04/15] HID: mcp2200: Use devm_hid_hw_start_and_open in mcp2200_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v2 01/15] HID: core: Use devm_add_action_or_reset helper to manage hid resources
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v2 11/15] hwmon: (corsair-psu) Use devm_hid_hw_start_and_open in corsairpsu_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v2 13/15] hwmon: (nzxt-kraken2) Use devm_hid_hw_start_and_open in kraken2_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v2 03/15] HID: ft260: Use devm_hid_hw_start_and_open in ft260_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v2 12/15] hwmon: (gigabyte_waterforce) Use devm_hid_hw_start_and_open in waterforce_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v2 00/15] HID: convert to devm_hid_hw_start_and_open()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next v2 02/15] HID: cp2112: Use devm_hid_hw_start_and_open in cp2112_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 0/7] i2c: npcm: Bug fixes read/write operation, checkpatch
  • From: Tali Perry <tali.perry1@xxxxxxxxx>
• Re: [PATCH v2 7/7] i2c: npcm: Enable slave in eob interrupt
  • From: Tali Perry <tali.perry1@xxxxxxxxx>
• Re: [PATCH v2 4/7] i2c: npcm: Modify timeout evaluation mechanism
  • From: Tali Perry <tali.perry1@xxxxxxxxx>
• Re: [PATCH v2 2/7] i2c: npcm: correct the read/write operation procedure
  • From: Tali Perry <tali.perry1@xxxxxxxxx>
• Re: [PATCH v2 6/7] i2c: npcm: use i2c frequency table
  • From: Tali Perry <tali.perry1@xxxxxxxxx>
• [PATCH] i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Liu Kimriver/刘金河 <kimriver.liu@xxxxxxxxxxxx>
• 回复: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Liu Kimriver/刘金河 <kimriver.liu@xxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Liu Kimriver/刘金河 <kimriver.liu@xxxxxxxxxxxx>
• Re: [PATCH v4 1/3] i2c: emev2: Use devm_clk_get_enabled() helpers
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 00/12] platform/chrome: Introduce DT hardware prober
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Remove I2C_COMPAT config symbol and related code
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v8 0/8] Add tsd,mule-i2c-mux support
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 3/5] i2c: piix4: Add ACPI support for ASF SMBus device
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH v2 4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• [PATCH v2 3/4] soc: qcom: geni-se: Export function geni_se_clks_off()
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• [PATCH v2 2/4] dma: gpi: Add Lock and Unlock TRE support to access SE exclusively
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• [PATCH v2 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• [PATCH v2 0/4] Enable shared SE support over I2C
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• [PATCH v2 0/4] Enable shared SE support over I2C
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v3 3/5] i2c: piix4: Add ACPI support for ASF SMBus device
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PATCH v3 3/5] i2c: piix4: Add ACPI support for ASF SMBus device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH v8 8/8] arm64: dts: rockchip: add tsd,mule-i2c-mux on px30-ringneck
  • From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
• [PATCH v8 7/8] arm64: dts: rockchip: add tsd,mule-i2c-mux on rk3588-tiger
  • From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
• [PATCH v8 6/8] arm64: dts: rockchip: add tsd,mule-i2c-mux on rk3399-puma
  • From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
• [PATCH v8 5/8] arm64: dts: rockchip: add tsd,mule-i2c-mux on rk3588-jaguar
  • From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
• [PATCH v8 4/8] hwmon: (amc6821) add support for tsd,mule
  • From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
• [PATCH v8 3/8] dt-bindings: hwmon: add support for ti,amc6821
  • From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
• [PATCH v8 2/8] i2c: muxes: add support for tsd,mule-i2c multiplexer
  • From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
• [PATCH v8 0/8] Add tsd,mule-i2c-mux support
  • From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
• [PATCH v8 1/8] dt-bindings: i2c: add support for tsd,mule-i2c-mux
  • From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
• Re: [PATCH v3 3/5] i2c: piix4: Add ACPI support for ASF SMBus device
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PATCH v3 3/5] i2c: piix4: Add ACPI support for ASF SMBus device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] of/irq: handle irq_of_parse_and_map() errors
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] i2c: Congatec Board Controller i2c bus driver
  • From: Thomas Richard <thomas.richard@xxxxxxxxxxx>
• Re: [PATCH v3 3/5] i2c: piix4: Add ACPI support for ASF SMBus device
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PATCH v4 0/7] Add SDM670 camera subsystem
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH v3 3/5] i2c: piix4: Add ACPI support for ASF SMBus device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/7] Add SDM670 camera subsystem
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/7] i2c: npcm: restore slave addresses array length
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 2/8] i2c: muxes: add support for tsd,mule-i2c multiplexer
  • From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
• Re: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/7] i2c: npcm: restore slave addresses array length
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Kimriver Liu <kimriver.liu@xxxxxxxxxxxx>
• Re: [PATCH v2 12/21] dt-bindings: thermal: tsens: document support on SA8255p
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v4 0/7] Add SDM670 camera subsystem
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH v3 4/5] i2c: piix4: Adjust the SMBus debug message
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v3 5/5] i2c: piix4: Clear remote IRR bit to get successive interrupt
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v3 3/5] i2c: piix4: Add ACPI support for ASF SMBus device
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v3 2/5] i2c: piix4: Add i2c_algorithm operations to support AMD ASF with SMBus
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v3 0/5] Introduce AMD ASF Controller Support to the i2c-piix4 driver
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v3 1/5] i2c: piix4: Allow more than two algo selection for SMBus
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/7] i2c: npcm: restore slave addresses array length
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Kimriver Liu <kimriver.liu@xxxxxxxxxxxx>
• Re: [PATCH v2 1/7] i2c: npcm: restore slave addresses array length
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Kimriver Liu <kimriver.liu@xxxxxxxxxxxx>
• Re: [PATCH -next 15/19] hwmon: (corsair-psu) Use devm_hid_hw_start_and_open in corsairpsu_probe()
  • From: Wilken Gottwalt <wilken.gottwalt@xxxxxxxxxx>
• Re: [PATCH v6 09/12] i2c: of-prober: Add regulator support
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH v4 0/7] Add SDM670 camera subsystem
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• Re: [PATCH v2 1/7] i2c: npcm: restore slave addresses array length
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v2 1/7] i2c: npcm: restore slave addresses array length
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH V2] i2c: imx-lpi2c: add target mode support
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 6/7] i2c: npcm: use i2c frequency table
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 4/7] i2c: npcm: Modify timeout evaluation mechanism
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 1/7] i2c: npcm: restore slave addresses array length
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 3/7] i2c: npcm: use a software flag to indicate a BER condition
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 2/7] i2c: npcm: correct the read/write operation procedure
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 1/7] i2c: npcm: restore slave addresses array length
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v4 0/7] Add SDM670 camera subsystem
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH v2 7/7] i2c: designware: Group all DesignWare drivers under a single option
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v7 2/8] i2c: muxes: add support for tsd,mule-i2c multiplexer
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v4 0/7] Add SDM670 camera subsystem
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v7 2/8] i2c: muxes: add support for tsd,mule-i2c multiplexer
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v4 0/7] Add SDM670 camera subsystem
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabledg
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 15/21] dt-bindings: i2c: document support for SA8255p
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v6 09/12] i2c: of-prober: Add regulator support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 09/12] i2c: of-prober: Add regulator support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6 09/12] i2c: of-prober: Add regulator support
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2] i2c: mpc: Use devm_clk_get_optional_enabled() to simplify code
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH v4 3/7] i2c: qcom-cci: Stop complaining about DT set clock rate
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH -next 01/19] HID: core: Use devm_add_action_or_reset helper to manage hid resources
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• Re: [PATCH -next 19/19] hwmon: (nzxt-smart2) Use devm_hid_hw_start_and_open in nzxt_smart2_hid_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• Re: [PATCH v4 3/7] i2c: qcom-cci: Stop complaining about DT set clock rate
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• Re: [PATCH v6 09/12] i2c: of-prober: Add regulator support
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH v4 4/7] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH v4 3/7] i2c: qcom-cci: Stop complaining about DT set clock rate
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH v4 3/7] i2c: qcom-cci: Stop complaining about DT set clock rate
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH -next 11/19] HID: wiimote: Use devm_hid_hw_start_and_open in wiimote_hid_probe()
  • From: Benjamin Tissoires <bentiss@xxxxxxxxxx>
• Re: [PATCH -next 10/19] HID: hid-steam: Use devm_hid_hw_start_and_open in steam_probe()
  • From: Benjamin Tissoires <bentiss@xxxxxxxxxx>
• Re: [PATCH v2 00/21] arm64: qcom: Introduce SA8255p Ride platform
  • From: Dmitry Baryshkov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH -next 08/19] HID: hid-picolcd: Use devm_hid_hw_start_and_open in picolcd_probe()
  • From: Benjamin Tissoires <bentiss@xxxxxxxxxx>
• Re: [PATCH -next 07/19] HID: shield: Use devm_hid_hw_start_and_open in shield_probe()
  • From: Benjamin Tissoires <bentiss@xxxxxxxxxx>
• Re: [PATCH -next 01/19] HID: core: Use devm_add_action_or_reset helper to manage hid resources
  • From: Benjamin Tissoires <bentiss@xxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] i2c: piix4: Add ACPI support for ASF SMBus device
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 3/5] i2c: piix4: Add ACPI support for ASF SMBus device
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 0/4] Enable shared SE support over I2C
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v6 03/12] regulator: Move OF-specific regulator lookup code to of_regulator.c
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/7] i2c: designware: Group all DesignWare drivers under a single option
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 03/12] regulator: Move OF-specific regulator lookup code to of_regulator.c
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH v2 17/21] dt-bindings: serial: document support for SA8255p
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: kimriver liu <kimriver.liu@xxxxxxxxxxxx>
• 回复: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Liu Kimriver/刘金河 <kimriver.liu@xxxxxxxxxxxx>
• Re: [PATCH v1 0/4] Enable shared SE support over I2C
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH -next 11/19] HID: wiimote: Use devm_hid_hw_start_and_open in wiimote_hid_probe()
  • From: "David Rheinsberg" <david@xxxxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: kimriver liu <kimriver.liu@xxxxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v6 11/12] platform/chrome: Introduce device tree hardware prober
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• Re: [PATCH v6 11/12] platform/chrome: Introduce device tree hardware prober
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• 回复: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Liu Kimriver/刘金河 <kimriver.liu@xxxxxxxxxxxx>
• Re: [PATCH v2 00/21] arm64: qcom: Introduce SA8255p Ride platform
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH v6 09/12] i2c: of-prober: Add regulator support
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 17/21] dt-bindings: serial: document support for SA8255p
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2] i2c: mpc: Use devm_clk_get_optional_enabled() to simplify code
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 17/21] dt-bindings: serial: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v1 2/4] dma: gpi: Add Lock and Unlock TRE support to access SE exclusively
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v1 0/4] Enable shared SE support over I2C
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 3/4] soc: qcom: geni-se: Export function geni_se_clks_off()
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v1 0/4] Enable shared SE support over I2C
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v1 0/4] Enable shared SE support over I2C
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: (subset) [PATCH v6 00/12] platform/chrome: Introduce DT hardware prober
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 17/21] dt-bindings: serial: document support for SA8255p
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH v6 08/12] i2c: Introduce OF component probe function
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 3/5] i2c: piix4: Add ACPI support for ASF SMBus device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 14/21] dt-bindings: cpufreq: qcom-hw: document support for SA8255p
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 14/21] dt-bindings: cpufreq: qcom-hw: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH -next 13/19] hwmon: Use devm_hid_hw_start_and_open in rog_ryujin_probe()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH -next 17/19] hwmon: (nzxt-kraken2) Use devm_hid_hw_start_and_open in kraken2_probe()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH -next 19/19] hwmon: (nzxt-smart2) Use devm_hid_hw_start_and_open in nzxt_smart2_hid_probe()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 10/12] i2c: of-prober: Add GPIO support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 09/12] i2c: of-prober: Add regulator support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 08/12] i2c: Introduce OF component probe function
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 07/12] i2c: core: Remove extra space in Makefile
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 02/12] of: base: Add for_each_child_of_node_with_prefix_scoped()
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 06/12] gpiolib: Add gpio_get_property_name_length()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/9] Add device tree for ArmSoM Sige 5 board
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 17/21] dt-bindings: serial: document support for SA8255p
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 15/21] dt-bindings: i2c: document support for SA8255p
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 15/21] dt-bindings: i2c: document support for SA8255p
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 03/12] regulator: Move OF-specific regulator lookup code to of_regulator.c
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 14/21] dt-bindings: cpufreq: qcom-hw: document support for SA8255p
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 17/21] dt-bindings: serial: document support for SA8255p
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 05/12] regulator: Do pure DT regulator lookup in of_regulator_bulk_get_all()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 03/12] regulator: Move OF-specific regulator lookup code to of_regulator.c
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 02/12] of: base: Add for_each_child_of_node_with_prefix_scoped()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/21] arm64: qcom: Introduce SA8255p Ride platform
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH v2 17/21] dt-bindings: serial: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH v2 17/21] dt-bindings: serial: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 15/21] dt-bindings: i2c: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH v2 15/21] dt-bindings: i2c: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH v2] i2c: mpc: Use devm_clk_get_optional_enabled() to simplify code
  • From: Zhang Zekun <zhangzekun11@xxxxxxxxxx>
• Re: [PATCH v2 14/21] dt-bindings: cpufreq: qcom-hw: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH -next 17/19] hwmon: (nzxt-kraken2) Use devm_hid_hw_start_and_open in kraken2_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next 19/19] hwmon: (nzxt-smart2) Use devm_hid_hw_start_and_open in nzxt_smart2_hid_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next 18/19] hwmon: (nzxt-kraken3) Use devm_hid_hw_start_and_open in kraken3_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next 15/19] hwmon: (corsair-psu) Use devm_hid_hw_start_and_open in corsairpsu_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next 16/19] hwmon: (gigabyte_waterforce) Use devm_hid_hw_start_and_open in waterforce_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next 12/19] hwmon: (aquacomputer_d5next) Use devm_hid_hw_start_and_open in aqc_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next 09/19] HID: playstation: Use devm_hid_hw_start_and_open in ps_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next 14/19] hwmon: (corsair-cpro) Use devm_hid_hw_start_and_open in ccp_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next 13/19] hwmon: Use devm_hid_hw_start_and_open in rog_ryujin_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next 11/19] HID: wiimote: Use devm_hid_hw_start_and_open in wiimote_hid_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next 10/19] HID: hid-steam: Use devm_hid_hw_start_and_open in steam_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next 08/19] HID: hid-picolcd: Use devm_hid_hw_start_and_open in picolcd_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next 06/19] HID: nintendo: Use devm_hid_hw_start_and_open in nintendo_hid_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next 07/19] HID: shield: Use devm_hid_hw_start_and_open in shield_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next 04/19] HID: mcp2200: Use devm_hid_hw_start_and_open in mcp2200_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next 05/19] HID: mcp2221: Use devm_hid_hw_start_and_open in mcp2221_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next 02/19] HID: cp2112: Use devm_hid_hw_start_and_open in cp2112_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next 01/19] HID: core: Use devm_add_action_or_reset helper to manage hid resources
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next 03/19] HID: ft260: Use devm_hid_hw_start_and_open in ft260_probe()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next 00/19] HID: convert to devm_hid_hw_start_and_open()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• Re: [PATCH 3/5] i2c: piix4: Add ACPI support for ASF SMBus device
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PATCH 4/5] i2c: piix4: Adjust the SMBus debug message
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v2 5/5] i2c: piix4: Clear remote IRR bit to get successive interrupt
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v2 3/5] i2c: piix4: Add ACPI support for ASF SMBus device
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v2 4/5] i2c: piix4: Adjust the SMBus debug message
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v2 2/5] i2c: piix4: Add i2c_algorithm operations to support AMD ASF with SMBus
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v2 1/5] i2c: piix4: Allow more than two algo selection for SMBus
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v2 0/5] Introduce AMD ASF Controller Support to the i2c-piix4 driver
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PATCH v7 2/8] i2c: muxes: add support for tsd,mule-i2c multiplexer
  • From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
• Re: [PATCH v6 11/12] platform/chrome: Introduce device tree hardware prober
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• [PATCH v6 12/12] arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v6 11/12] platform/chrome: Introduce device tree hardware prober
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v6 10/12] i2c: of-prober: Add GPIO support
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v6 09/12] i2c: of-prober: Add regulator support
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v6 08/12] i2c: Introduce OF component probe function
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v6 07/12] i2c: core: Remove extra space in Makefile
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v6 06/12] gpiolib: Add gpio_get_property_name_length()
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v6 05/12] regulator: Do pure DT regulator lookup in of_regulator_bulk_get_all()
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v6 04/12] regulator: Split up _regulator_get()
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v6 03/12] regulator: Move OF-specific regulator lookup code to of_regulator.c
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v6 02/12] of: base: Add for_each_child_of_node_with_prefix_scoped()
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v6 01/12] of: dynamic: Add of_changeset_update_prop_string
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v6 00/12] platform/chrome: Introduce DT hardware prober
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH v7 2/8] i2c: muxes: add support for tsd,mule-i2c multiplexer
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v7 2/8] i2c: muxes: add support for tsd,mule-i2c multiplexer
  • From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
• Re: [PATCH] i2c: mpc: Use devm_clk_get() to simplify code
  • From: "zhangzekun (A)" <zhangzekun11@xxxxxxxxxx>
• Re: [PATCH v2 15/21] dt-bindings: i2c: document support for SA8255p
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 15/21] dt-bindings: i2c: document support for SA8255p
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 17/21] dt-bindings: serial: document support for SA8255p
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] i2c: mpc: Use devm_clk_get() to simplify code
  • From: Zhang Zekun <zhangzekun11@xxxxxxxxxx>
• [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
  • From: kimriver liu <kimriver.liu@xxxxxxxxxxxx>
• Re: [PATCH v2 19/21] dt-bindings: firmware: arm,scmi: allow multiple virtual instances
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 17/21] dt-bindings: serial: document support for SA8255p
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 15/21] dt-bindings: i2c: document support for SA8255p
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 14/21] dt-bindings: cpufreq: qcom-hw: document support for SA8255p
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 2/7] dt-bindings: i2c: qcom-cci: Document SDM670 compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 1/7] dt-bindings: clock: qcom,sdm845-camcc: add sdm670 compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 4/7] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 00/21] arm64: qcom: Introduce SA8255p Ride platform
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4 4/7] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH v4 7/7] arm64: dts: qcom: sdm670: add camss and cci
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v4 6/7] arm64: dts: qcom: sdm670: add camcc
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v4 5/7] media: qcom: camss: add support for SDM670 camss
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v4 4/7] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v4 3/7] i2c: qcom-cci: Stop complaining about DT set clock rate
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v4 2/7] dt-bindings: i2c: qcom-cci: Document SDM670 compatible
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v4 1/7] dt-bindings: clock: qcom,sdm845-camcc: add sdm670 compatible
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v4 0/7] Add SDM670 camera subsystem
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• Re: [PATCH v2 13/21] dt-bindings: pinctrl: Add SA8255p TLMM
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: (subset) [PATCH v4 0/9] Add device tree for ArmSoM Sige 5 board
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] of/irq: handle irq_of_parse_and_map() errors
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v4 3/9] dt-bindings: i2c: i2c-rk3x: Add rk3576 compatible
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v4 3/9] dt-bindings: i2c: i2c-rk3x: Add rk3576 compatible
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: (subset) [PATCH v4 0/9] Add device tree for ArmSoM Sige 5 board
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v2 00/21] arm64: qcom: Introduce SA8255p Ride platform
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH v2 03/21] dt-bindings: arm: qcom: add SA8255p Ride board
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH v4 3/9] dt-bindings: i2c: i2c-rk3x: Add rk3576 compatible
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH v2 21/21] arm64: dts: qcom: Add reduced functional DT for SA8255p Ride platform
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH v2 20/21] dt-bindings: arm: GIC: add ESPI and EPPI specifiers
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH v2 19/21] dt-bindings: firmware: arm,scmi: allow multiple virtual instances
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH v2 14/21] dt-bindings: cpufreq: qcom-hw: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH v2 17/21] dt-bindings: serial: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH v2 04/21] dt-bindings: firmware: qcom,scm: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH v2 05/21] dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH v2 12/21] dt-bindings: thermal: tsens: document support on SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH v2 15/21] dt-bindings: i2c: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH v2 02/21] soc: qcom: socinfo: add support for SA8255P
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH v2 11/21] dt-bindings: mfd: qcom,tcsr: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH v2 13/21] dt-bindings: pinctrl: Add SA8255p TLMM
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH v2 06/21] dt-bindings: watchdog: qcom-wdt: document support on SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH v2 08/21] dt-bindings: interrupt-controller: qcom-pdc: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH v2 07/21] dt-bindings: crypto: qcom,prng: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH v2 10/21] dt-bindings: arm-smmu: document the support on SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH v2 16/21] dt-bindings: spi: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH v2 18/21] dt-bindings: qcom: geni-se: document support for SA8255P
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH v2 01/21] dt-bindings: arm: qcom: add the SoC ID for SA8255P
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH v2 09/21] dt-bindings: soc: qcom: aoss-qmp: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: (subset) [PATCH v4 0/9] Add device tree for ArmSoM Sige 5 board
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH v4 3/9] dt-bindings: i2c: i2c-rk3x: Add rk3576 compatible
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH 4/5] i2c: piix4: Adjust the SMBus debug message
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 1/5] i2c: piix4: Allow more than two algo selection for SMBus
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 0/7] i2c: designware: Group all DesignWare drivers under a single option
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 4/4] i2c: imx: prevent rescheduling in non dma mode
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 3/5] i2c: piix4: Add ACPI support for ASF SMBus device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] i2c: piix4: Add ACPI support for ASF SMBus device
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PATCH v4 3/9] dt-bindings: i2c: i2c-rk3x: Add rk3576 compatible
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v4 3/9] dt-bindings: i2c: i2c-rk3x: Add rk3576 compatible
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] of/irq: handle irq_of_parse_and_map() errors
  • From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
• Re: [PATCH v4 3/9] dt-bindings: i2c: i2c-rk3x: Add rk3576 compatible
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v4 3/9] dt-bindings: i2c: i2c-rk3x: Add rk3576 compatible
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• Re: [PATCH v4 3/9] dt-bindings: i2c: i2c-rk3x: Add rk3576 compatible
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v7 2/8] i2c: muxes: add support for tsd,mule-i2c multiplexer
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 11/22] pinctrl: qcom: sa8775p: Add support for SA8255p SoC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 11/22] pinctrl: qcom: sa8775p: Add support for SA8255p SoC
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• [PATCH v4 8/9] arm64: dts: rockchip: Add rk3576 SoC base DT
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH v4 9/9] arm64: dts: rockchip: Add rk3576-armsom-sige5 board
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH v4 7/9] spi: dt-bindings: Add rockchip,rk3576-spi compatible
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH v4 6/9] dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH v4 5/9] dt-bindings: gpu: Add rockchip,rk3576-mali compatible
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH v4 4/9] dt-bindings: serial: snps-dw-apb-uart: Add Rockchip RK3576
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH v4 3/9] dt-bindings: i2c: i2c-rk3x: Add rk3576 compatible
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH v4 1/9] dt-bindings: arm: rockchip: Add ArmSoM Sige 5
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH v4 2/9] dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• [PATCH v4 0/9] Add device tree for ArmSoM Sige 5 board
  • From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
• Re: [PATCH v7 2/8] i2c: muxes: add support for tsd,mule-i2c multiplexer
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: designware: Consolidate PM ops
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: designware: Consolidate PM ops
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH v2 7/7] i2c: designware: Group all DesignWare drivers under a single option
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 6/7] net: txgbe: Fix I2C Kconfig dependencies
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 5/7] RISC-V: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 4/7] mips: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 3/7] arm64: defconfig: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 2/7] ARM: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 1/7] ARC: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 0/7] i2c: designware: Group all DesignWare drivers under a single option
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 04/18] mux: add mux_chip_resume() function
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH net 0/3] Add I2C bus lock for Wangxun
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v3 06/11] dt-bindings: mmc: Add support for rk3576 eMMC
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 2/2] driver core: class: warn if a compatibility class is registered
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] driver core: class: warn if a compatibility class is registered
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Remove I2C_COMPAT config symbol and related code
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 2/2] driver core: class: warn if a compatibility class is registered
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] driver core: class: warn if a compatibility class is registered
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: simplify with scoped for each OF child loop
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] at24 updates for v6.12-rc1
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] driver core: class: warn if a compatibility class is registered
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] driver core: class: warn if a compatibility class is registered
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: core: Switch I2C_COMPAT to default n
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH net 0/3] Add I2C bus lock for Wangxun
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/7] i2c: npcm: Modify the client address assignment
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH] i2c: Remove I2C_COMPAT config symbol and related code
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 2/2] driver core: class: warn if a compatibility class is registered
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] driver core: class: warn if a compatibility class is registered
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 1/2] i2c: core: Switch I2C_COMPAT to default n
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 0/2] i2c: core: prepare dropping support for I2C_COMPAT
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v7 8/8] arm64: dts: rockchip: add tsd,mule-i2c-mux on px30-ringneck
  • From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
• [PATCH v7 7/8] arm64: dts: rockchip: add tsd,mule-i2c-mux on rk3588-tiger
  • From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
• [PATCH v7 6/8] arm64: dts: rockchip: add tsd,mule-i2c-mux on rk3399-puma
  • From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
• [PATCH v7 5/8] arm64: dts: rockchip: add tsd,mule-i2c-mux on rk3588-jaguar
  • From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
• [PATCH v7 4/8] hwmon: (amc6821) add support for tsd,mule
  • From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
• [PATCH v7 3/8] dt-bindings: hwmon: add support for ti,amc6821
  • From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
• [PATCH v7 0/8] Add tsd,mule-i2c-mux support
  • From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
• [PATCH v7 2/8] i2c: muxes: add support for tsd,mule-i2c multiplexer
  • From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
• [PATCH v7 1/8] dt-bindings: i2c: add support for tsd,mule-i2c-mux
  • From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
• Re: [PATCH 4/5] watchdog: Congatec Board Controller watchdog timer driver
  • From: Thomas Richard <thomas.richard@xxxxxxxxxxx>
• [GIT PULL] at24 updates for v6.12-rc1
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [RFC PATCH 1/2] dt-bindings: i2c: renesas,rcar-i2c: document SMBusAlert usage
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/7] i2c: npcm: use i2c frequency table
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/7] i2c: npcm: Modify the client address assignment
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 13/22] dt-bindings: thermal: tsens: document support on SA8255p
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [RFC PATCH 1/2] dt-bindings: i2c: renesas,rcar-i2c: document SMBusAlert usage
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Remove I2C_COMPAT config symbol and related code
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] Add atomic transfer support to i2c-cadence
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH] i2c: designware: Group all DesignWare drivers under a single option
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v3 4/4] i2c: imx: prevent rescheduling in non dma mode
  • From: Stefan Eichenberger <eichest@xxxxxxxxx>
• [PATCH v3 3/4] i2c: imx: use readb_relaxed and writeb_relaxed
  • From: Stefan Eichenberger <eichest@xxxxxxxxx>
• [PATCH v3 2/4] i2c: imx: separate atomic, dma and non-dma use case
  • From: Stefan Eichenberger <eichest@xxxxxxxxx>
• [PATCH v3 1/4] i2c: imx: only poll for bus busy in multi master mode
  • From: Stefan Eichenberger <eichest@xxxxxxxxx>
• [PATCH v3 0/4] i2c: imx: prevent rescheduling in non-dma mode
  • From: Stefan Eichenberger <eichest@xxxxxxxxx>
• Re: [PATCH v2 5/7] i2c: npcm: Modify the client address assignment
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v2 0/4] i2c: Replace lists of special clients with flagging of such clients
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] i2c: Remove I2C_COMPAT config symbol and related code
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] ipmi: docs: don't advertise deprecated sysfs entries
  • From: Corey Minyard <corey@xxxxxxxxxxx>
• Re: [PATCH v2 6/7] i2c: npcm: use i2c frequency table
  • From: Tali Perry <tali.perry1@xxxxxxxxx>
• Re: [PATCH v2 0/4] i2c: Replace lists of special clients with flagging of such clients
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Remove I2C_COMPAT config symbol and related code
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] ipmi: docs: don't advertise deprecated sysfs entries
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Group all DesignWare drivers under a single option
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] i2c: designware: Group all DesignWare drivers under a single option
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v6 1/8] dt-bindings: i2c: add support for tsd,mule-i2c-mux
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/8] i2c: muxes: add support for tsd,mule-i2c multiplexer
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/2] dt-bindings: i2c: renesas,rcar-i2c: document SMBusAlert usage
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Group all DesignWare drivers under a single option
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 6/7] i2c: npcm: use i2c frequency table
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/7] i2c: npcm: Modify the client address assignment
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: designware: Consolidate PM ops
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 22/22] arm64: dts: qcom: Add reduced functional DT for SA8255p Ride platform
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH 16/22] dt-bindings: qcom: geni-se: document support for SA8255P
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH 21/22] ARM: dt: GIC: add extended SPI specifier
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH 21/22] ARM: dt: GIC: add extended SPI specifier
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] of/irq: handle irq_of_parse_and_map() errors
  • From: Ma Ke <make24@xxxxxxxxxxx>
• [PATCH] i2c: designware: Group all DesignWare drivers under a single option
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 14/22] dt-bindings: arm-smmu: document the support on SA8255p
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 16/22] dt-bindings: qcom: geni-se: document support for SA8255P
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 11/22] pinctrl: qcom: sa8775p: Add support for SA8255p SoC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 22/22] arm64: dts: qcom: Add reduced functional DT for SA8255p Ride platform
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 5/5] i2c: imx-lpi2c: increase PM timeout to avoid operate clk frequently
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• RE: [EXT] Re: [PATCH 5/5] i2c: imx-lpi2c: increase PM timeout to avoid operate clk frequently
  • From: Carlos Song <carlos.song@xxxxxxx>
• RE: [EXT] Re: [PATCH 2/5] i2c: imx-lpi2c: add IRQF_NO_SUSPEND IRQ flag
  • From: Carlos Song <carlos.song@xxxxxxx>
• RE: [EXT] Re: [PATCH 4/5] i2c: imx-lpi2c: improve i2c driver probe priority
  • From: Carlos Song <carlos.song@xxxxxxx>
• Re: (subset) [PATCH v3 04/11] dt-bindings: mfd: syscon: Add rk3576 QoS register compatible
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 4/4] i2c: imx: prevent rescheduling in non dma mode
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 0/4] Enable shared SE support over I2C
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH v2 3/4] i2c: imx: use readb_relaxed and writeb_relaxed
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] i2c: imx: separate atomic, dma and non-dma use case
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: designware: Consolidate PM ops
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH v2 7/7] i2c: npcm: Enable slave in eob interrupt
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v2 6/7] i2c: npcm: use i2c frequency table
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v2 5/7] i2c: npcm: Modify the client address assignment
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v2 4/7] i2c: npcm: Modify timeout evaluation mechanism
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v2 3/7] i2c: npcm: use a software flag to indicate a BER condition
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v2 2/7] i2c: npcm: correct the read/write operation procedure
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v2 1/7] i2c: npcm: restore slave addresses array length
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v2 0/7] i2c: npcm: Bug fixes read/write operation, checkpatch
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH 22/22] arm64: dts: qcom: Add reduced functional DT for SA8255p Ride platform
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH 21/22] ARM: dt: GIC: add extended SPI specifier
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH 21/22] ARM: dt: GIC: add extended SPI specifier
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 0/4] Enable shared SE support over I2C
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 14/22] dt-bindings: arm-smmu: document the support on SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH net 0/3] Add I2C bus lock for Wangxun
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 1/1] i2c: designware: Consolidate PM ops
  • From: "Goswami, Sanket" <Sanket.Goswami@xxxxxxx>
• Re: [PATCH 00/22] arm64: qcom: Introduce SA8255p Ride platform
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH 16/22] dt-bindings: qcom: geni-se: document support for SA8255P
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH 18/22] dt-bindings: spi: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH 17/22] dt-bindings: serial: document support for SA8255p
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH 11/22] pinctrl: qcom: sa8775p: Add support for SA8255p SoC
  • From: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
• Re: [PATCH v2 09/12] dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH net 3/3] i2c: designware: support hardware lock for Wangxun 10Gb NIC
  • From: "'Andy Shevchenko'" <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] i2c: imx-lpi2c: increase PM timeout to avoid operate clk frequently
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: imx-lpi2c: add IRQF_NO_SUSPEND IRQ flag
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• [PATCH V2] i2c: imx-lpi2c: add target mode support
  • From: carlos.song@xxxxxxx
• Re: [PATCH v1 3/4] soc: qcom: geni-se: Export function geni_se_clks_off()
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 4/5] i2c: imx-lpi2c: improve i2c driver probe priority
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH v1 0/4] Enable shared SE support over I2C
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v1 2/4] dma: gpi: Add Lock and Unlock TRE support to access SE exclusively
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v1 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v1 0/4] Enable shared SE support over I2C
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 5/5] i2c: imx-lpi2c: increase PM timeout to avoid operate clk frequently
  • From: carlos.song@xxxxxxx
• [PATCH 4/5] i2c: imx-lpi2c: improve i2c driver probe priority
  • From: carlos.song@xxxxxxx
• [PATCH 3/5] i2c: imx-lpi2c: manage IRQ request/release in runtime pm
  • From: carlos.song@xxxxxxx
• [PATCH 2/5] i2c: imx-lpi2c: add IRQF_NO_SUSPEND IRQ flag
  • From: carlos.song@xxxxxxx
• [PATCH 1/5] i2c: imx-lpi2c: add target mode support
  • From: carlos.song@xxxxxxx
• [PATCH v1 4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• [PATCH v1 3/4] soc: qcom: geni-se: Export function geni_se_clks_off()
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• [PATCH v1 2/4] dma: gpi: Add Lock and Unlock TRE support to access SE exclusively
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• [PATCH v1 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• [PATCH v1 0/4] Enable shared SE support over I2C
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• [PATCH V4] i2c: imx-lpi2c: add eDMA mode support for LPI2C
  • From: Carlos Song <carlos.song@xxxxxxx>
• RE: [PATCH net 3/3] i2c: designware: support hardware lock for Wangxun 10Gb NIC
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] dt-bindings: i2c: nvidia,tegra20-i2c: minor cleanups
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>