Re: [PATCH 1/1] i2c: qcom-geni: add 32MHz I2C SE clock support for IPQ5424

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks manikanta !

On 9/25/2024 2:14 PM, Manikanta Mylavarapu wrote:


On 9/25/2024 1:06 PM, Mukesh Kumar Savaliya wrote:
Hi Manikanta,

On 9/24/2024 12:20 PM, Manikanta Mylavarapu wrote:
The IPQ5424 I2C SE clock operates at a frequency of 32MHz. Since the
would it be better to say , I2C SE is sourced from 32MHZ ?

Okay, sure.

existing map table is based on 19.2MHz, this patch incorporate the
based on 19.2MHz. this patch /,/.

Okay, sure.

clock map table to derive the SCL clock from the 32MHz SE clock.
from the 32MHz Source Clock frequency.
SE = Expand OR  (I2C Serial Engine Controller)

Okay, sure.

Please also mention the reason why 32MHz got added ? Need to describe evolution to understand the purpose behind this change.

Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
---
   drivers/i2c/busses/i2c-qcom-geni.c | 11 +++++++++++
   1 file changed, 11 insertions(+)

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 212336f724a6..bbd9ecf09f4b 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -71,6 +71,7 @@ enum geni_i2c_err_code {
     #define I2C_AUTO_SUSPEND_DELAY    250
   #define KHZ(freq)        (1000 * freq)
+#define MHZ(freq)        (1000000 * freq)
   #define PACKING_BYTES_PW    4
     #define ABORT_TIMEOUT        HZ
@@ -152,11 +153,21 @@ static const struct geni_i2c_clk_fld geni_i2c_clk_map[] = {
A thought - Should we rename this appending _19.2M ? In future one or more may come as it evolves speed.

Okay, sure.

Thanks & Regards,
Manikanta.

       {KHZ(1000), 1, 3,  9, 18},
   };
   +/* source_clock = 32 MHz */
+static const struct geni_i2c_clk_fld geni_i2c_clk_map_32M[] = {
+    {KHZ(100), 7, 14, 18, 40},
+    {KHZ(400), 4,  3, 11, 20},
+    {KHZ(1000), 4, 3,  6, 15},
+};
+
   static int geni_i2c_clk_map_idx(struct geni_i2c_dev *gi2c)
   {
       int i;
       const struct geni_i2c_clk_fld *itr = geni_i2c_clk_map;
   +    if (clk_get_rate(gi2c->se.clk) == MHZ(32))
+        itr = geni_i2c_clk_map_32M;
+
       for (i = 0; i < ARRAY_SIZE(geni_i2c_clk_map); i++, itr++) {
           if (itr->clk_freq_out == gi2c->clk_freq_out) {
               gi2c->clk_fld = itr;





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux