Re: [PATCH v3 1/3] dt-bindings: i2c: Add RTL9300 I2C controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 24, 2024 at 11:02:28AM +1200, Chris Packham wrote:
> Add dtschema for the I2C controller on the RTL9300 SoC. The I2C
> controllers on this SoC are part of the "switch" block which is
> represented here as a syscon node. The SCL pins are dependent on the I2C
> controller (GPIO8 for the first controller, GPIO 17 for the second). The
> SDA pins can be assigned to either one of the I2C controllers (but not
> both).
> 
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> ---
> 
> Notes:
>     Changes in v3:
>     - Remove parent node in example
>     - put unevaluatedProperties after required
>     - Add #address-cells and #size-cells
>     
>     Changes in v2:
>     - Use reg property for controller registers
>     - Remove global-control-offset (will be hard coded in driver)
>     - Integrated the multiplexing function. Child nodes now represent the
>       available SDA lines
> 
>  .../bindings/i2c/realtek,rtl9300-i2c.yaml     | 80 +++++++++++++++++++
>  MAINTAINERS                                   |  6 ++
>  2 files changed, 86 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i2c/realtek,rtl9300-i2c.yaml
> 
> diff --git a/Documentation/devicetree/bindings/i2c/realtek,rtl9300-i2c.yaml b/Documentation/devicetree/bindings/i2c/realtek,rtl9300-i2c.yaml
> new file mode 100644
> index 000000000000..979ec22e81f1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/realtek,rtl9300-i2c.yaml
> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/realtek,rtl9300-i2c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Realtek RTL I2C Controller
> +
> +maintainers:
> +  - Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> +
> +description:
> +  The RTL9300 SoC has two I2C controllers. Each of these has an SCL line (which

This is confusing. It took me some minutes to understand that two I2Cs
in the example do not match what you wrote here. I got there only because
of your DTS. Your patchsets - sent separately and describing problem
incompletely - do not help.

This is the binding for I2C, not for RTL9300 SoC.

> +  if not-used for SCL can be a GPIO). There are 8 common SDA lines that can be
> +  assigned to either I2C controller.
> +
> +properties:
> +  compatible:
> +    const: realtek,rtl9300-i2c
> +
> +  reg:
> +    description: Register offset and size this I2C controller.

Nope, your reboot mode does not have reg. Either fix reboot mode driver
or this. Preferably reboot mode.

Best regards,
Krzysztof





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux