Re: [PATCH 5/5] i2c: rtl9300: Add multiplexing support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Chris,

...

> -module_platform_driver(rtl9300_i2c_driver);
> +static int rtl9300_i2c_select_chan(struct i2c_mux_core *muxc, u32 chan)
> +{
> +	struct i2c_adapter *adap = muxc->parent;
> +	struct rtl9300_i2c *i2c = i2c_get_adapdata(adap);
> +	int ret;
> +
> +	ret = rtl9300_i2c_config_io(i2c, chan);
> +	if (ret)
> +		return ret;
> +
> +	return 0;

return "rtl9300_i2c_config_io()"?

> +}

...

> +static int rtl9300_i2c_mux_probe_fw(struct rtl9300_i2c_chan *mux, struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct fwnode_handle *fwnode = dev_fwnode(dev);
> +	struct device_node *np = dev->of_node;
> +	struct device_node *adap_np;
> +	struct i2c_adapter *adap = NULL;
> +	struct fwnode_handle *child;
> +	unsigned int *chans;
> +	int i = 0;
> +
> +	if (!is_of_node(fwnode))
> +		return -EOPNOTSUPP;
> +
> +	if (!np)
> +		return -ENODEV;
> +
> +	adap_np = of_parse_phandle(np, "i2c-parent", 0);
> +	if (!adap_np) {
> +		dev_err(&pdev->dev, "Cannot parse i2c-parent\n");
> +		return -ENODEV;

return dev_err_probe(...)?

> +	}
> +	adap = of_find_i2c_adapter_by_node(adap_np);
> +	of_node_put(adap_np);

...

> +static int __init rtl9300_i2c_init(void)
> +{
> +	return platform_register_drivers(drivers, ARRAY_SIZE(drivers));
> +}
> +module_init(rtl9300_i2c_init);
> +
> +static void __exit rtl9300_i2c_exit(void)
> +{
> +	platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
> +}
> +module_exit(rtl9300_i2c_exit);

You could use module_platform_driver()

Thanks,
Andi

>  
>  MODULE_DESCRIPTION("RTL9300 I2C controller driver");
>  MODULE_LICENSE("GPL");
> -- 
> 2.46.1
> 




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux