Re: [PATCH v4 4/8] drm/bridge: hotplug-bridge: add driver to support hot-pluggable DSI bridges

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Simona, Maxime, Dmitry,

On Tue, 17 Sep 2024 10:53:08 +0200
Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx> wrote:

> This driver implements the point of a DRM pipeline where a connector allows
> removal of all the following bridges up to the panel.

This is a quick feedback of the discussions about hotpluggable DRM
bridges I had with Maxime and Dmitry during the Linux Plumbers
Conference last week, which happened during the discussion I led on
Wednesday afternoon and even more in the hallway.

It was clear that adding refcounting to DRM bridges and handling
gracefully atomic modeset operations during device removal are
prerequisites for a hotpluggable bridge in DRM.

DSI host drivers that keep a pointer to their device also need to be
fixed, but this is well known and was not  discussed.

Simona's proposal of letting removable bridges be owned by the hotplug
connector was not seen as necessarily needed, especially after adding
bridge refcounting. Also Maxime mentioned this idea might conflict with
a use case that had been brought to his attention, involving bridges
and DP MST. So I'm removing this idea from my roadmap -- it can be
re-discussed and brought back if needed.

There was no clear outcome about the question of whether the
hotplug-bridge should still exist as a drm_bridge or rather the DRM
core and the bridge drivers should be extended to handle everything.
Dmitry seemed to think no hotplug bridge should exist at all, and all
bridge drivers should be extended to cope with insertion and removal of
the follofing bridge. Ripard's opinion was "I don't care". In her
e-mail sent a few hours ago (in the v2 thread) Simona also appears as
not having a strong position about this. There will be some time to
clarify this as I'm addressing the previously mentioned issues.

So by now the roadmap involves the following main steps:
 1. add refcounting to DRM bridges (struct drm_bridge)
 2. handle gracefully atomic updates during bridge removal
 3. avoid DSI host drivers to have dangling pointers to DSI devices
 4. finish the hotplug bridge work, moving code to the core and
    potentially removing the hotplug-bridge itself

If you think any other major item is required to support hot-pluggable
DRM bridges, don't hesitate to speak out.

Best regards,
Luca

-- 
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux