On 12/09/2024 20:24, Arturs Artamonovs via B4 Relay wrote: > This set of patches based on ADI fork of Linux Kerenl that support family of ADSP-SC5xx > SoC's and used by customers for some time . Patch series contains minimal set > of changes to add ADSP-SC598 support to upstream kernel. This series include > UART,I2C,IRQCHIP,RCU drivers and device-tree to be able boot on EV-SC598-SOM > board into serial shell and able to reset the board. Current SOM board > requires I2C expander to enable UART output. > > UART,I2C and PINCTRL drivers are based on old Blackfin drivers with > ADSP-SC5xx related bug fixes and improvments. > > Signed-off-by: Arturs Artamonovs <arturs.artamonovs@xxxxxxxxxx> > --- For new platform, be sure you have 0 warnings: 1. Please run standard kernel tools for static analysis, like coccinelle, smatch and sparse, and fix reported warnings. 2. Also check for warnings when building with W=1. Most of these commands (checks or W=1 build) can build specific targets, like some directory, to narrow the scope to only your code. The code here looks like it needs a fix. Feel free to get in touch if the warning is not clear. 3. Fix all compile test warning reported by LKP and check for common configs, regardless of reports. 4. Please run `make dtbs_check W=1` (see Documentation/devicetree/bindings/writing-schema.rst or https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/ for instructions). 5. Please run scripts/checkpatch.pl and fix reported warnings. Then please run `scripts/checkpatch.pl --strict` and (probably) fix more warnings. Some warnings can be ignored, especially from --strict run. Best regards, Krzysztof
