Linux Kernel I2C

• Thread Index

• Re: [PATCH 8/8] i2c: sprd: Increase the waiting time for IIC transmission to avoid system crash issues
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 7/8] i2c: sprd: Set I2C_RX_ACK when clear irq
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 4/8] i2c: sprd: Add IIC controller driver to support dynamic switching of 400K/1M/3.4M frequency
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 3/8] i2c: sprd: Use global variables to record IIC ack/nack status instead of local variables
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 2/8] i2c: sprd: Add I2C driver to use 'reset framework' function
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 1/8] i2c: sprd: Add configurations that support 1Mhz and 3.4Mhz frequencies
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH v2] i2c: i801: fix cleanup code in remove() and error path of probe()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2] i2c: i801: fix potential race in i801_block_transaction_byte_by_byte
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v12 0/4] Add Intel LJCA device driver
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: muxes: Enable features on MAX7357
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v12 2/4] i2c: Add support for Intel LJCA USB I2C driver
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v12 4/4] gpio: update Intel LJCA USB GPIO driver
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH] eeprom: at24: Drop at24_get_chip_data()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v12 4/4] gpio: update Intel LJCA USB GPIO driver
  • From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
• RE: [PATCH v12 1/4] usb: Add support for Intel LJCA device
  • From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
• RE: [PATCH v12 3/4] spi: Add support for Intel LJCA USB SPI driver
  • From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
• RE: [PATCH v12 0/4] Add Intel LJCA device driver
  • From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
• Re: [PATCH v12 0/4] Add Intel LJCA device driver
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] i2c: gpio: Fix the NULL vs IS_ERR() bug for debugfs_create_dir()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: mux: pca954x: Make sure the mux remains configured the same as before resume
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] i2c: i801: fix potential race in i801_block_transaction_byte_by_byte
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] i2c: i801: fix cleanup code in remove() and error path of probe()
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] i2c: i801: fix potential race in i801_block_transaction_byte_by_byte
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] i2c: i801: fix potential race in i801_block_transaction_byte_by_byte
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v12 4/4] gpio: update Intel LJCA USB GPIO driver
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH v12 3/4] spi: Add support for Intel LJCA USB SPI driver
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH v12 1/4] usb: Add support for Intel LJCA device
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: fix cleanup code in remove() and error path of probe()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] i2c: i801: fix cleanup code in remove() and error path of probe()
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [RFC PATCH] i2c: core: dont change pinmux state to GPIO during recovery setup
  • From: Robert Marko <robert.marko@xxxxxxxxxx>
• Re: [PATCH 09/14] I2C: sis5595: Do PCI error checks on own line
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 08/14] I2C: nforce2: Do PCI error check on own line
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 1/2] i2c: mux: pca954x: Make sure the mux remains configured the same as before resume
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v12 4/4] gpio: update Intel LJCA USB GPIO driver
  • From: Wentong Wu <wentong.wu@xxxxxxxxx>
• [PATCH v12 3/4] spi: Add support for Intel LJCA USB SPI driver
  • From: Wentong Wu <wentong.wu@xxxxxxxxx>
• [PATCH v12 2/4] i2c: Add support for Intel LJCA USB I2C driver
  • From: Wentong Wu <wentong.wu@xxxxxxxxx>
• [PATCH v12 1/4] usb: Add support for Intel LJCA device
  • From: Wentong Wu <wentong.wu@xxxxxxxxx>
• [PATCH v12 0/4] Add Intel LJCA device driver
  • From: Wentong Wu <wentong.wu@xxxxxxxxx>
• Re: [PATCH 1/2] i2c: mux: pca954x: Make sure the mux remains configured the same as before resume
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 1/2] i2c: mux: pca954x: Make sure the mux remains configured the same as before resume
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 2/2] i2c: mux: pca954x: Resume the mux early
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH 1/2] i2c: mux: pca954x: Make sure the mux remains configured the same as before resume
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v12 2/2] i2c: aspeed: support ast2600 i2c new register mode driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] i2c: gpio: Fix the NULL vs IS_ERR() bug for debugfs_create_dir()
  • From: Jinjie Ruan <ruanjinjie@xxxxxxxxxx>
• RE: [PATCH v11 1/4] usb: Add support for Intel LJCA device
  • From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c: Add custom properties for MAX7357/MAX7358
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-binding: Add custom property for MAX7357
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v11 1/4] usb: Add support for Intel LJCA device
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH v2 2/2] i2c: muxes: pca954x: Enable features on MAX7357/MAX7358
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: i2c: Add custom properties for MAX7357/MAX7358
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-binding: Add custom property for MAX7357
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• [PATCH v2] i2c: cadence: Fix the kernel-doc warnings
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxx>
• Re: [PATCH 5/8] i2c: sprd: Configure the enable bit of the IIC controller before each transmission initiation
  • From: Chunyan Zhang <zhang.lyra@xxxxxxxxx>
• Re: [PATCH 6/8] i2c: sprd: Add additional IIC control bit configuration to adapt to the new IP version of the UNISOC platform
  • From: Chunyan Zhang <zhang.lyra@xxxxxxxxx>
• Re: [PATCH 4/8] i2c: sprd: Add IIC controller driver to support dynamic switching of 400K/1M/3.4M frequency
  • From: Chunyan Zhang <zhang.lyra@xxxxxxxxx>
• Re: [PATCH 3/8] i2c: sprd: Use global variables to record IIC ack/nack status instead of local variables
  • From: Chunyan Zhang <zhang.lyra@xxxxxxxxx>
• RE: [PATCH v12 2/2] i2c: aspeed: support ast2600 i2c new register mode driver
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• Re: [PATCH v11 2/4] i2c: Add support for Intel LJCA USB I2C driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH RESEND] i2c: at91: Use dev_err_probe() instead of dev_err()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• RE: [PATCH v11 2/4] i2c: Add support for Intel LJCA USB I2C driver
  • From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
• Re: [PATCH v2 5/8] I2C: ali15x3: Do PCI error checks on own line
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH 2/2] i2c: muxes: Enable features on MAX7357
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: designware: fix __i2c_dw_disable() in case master is holding SCL low
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-binding: Add custom property for MAX7357
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/2] dt-binding: Add custom property for MAX7357
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• [PATCH AUTOSEL 6.4 13/17] i2c: imx-lpi2c: return -EINVAL when i2c peripheral clk doesn't work
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH RESEND] i2c: at91: Use dev_err_probe() instead of dev_err()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH RESEND] i2c: at91: Use dev_err_probe() instead of dev_err()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3] i2c: designware: fix __i2c_dw_disable() in case master is holding SCL low
  • From: Yann Sionneau <yann@xxxxxxxxxxxx>
• RE: [PATCH v10 2/4] i2c: Add support for Intel LJCA USB I2C driver
  • From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
• Re: [PATCH v10 2/4] i2c: Add support for Intel LJCA USB I2C driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 3/4] i2c: i801: Improve i801_block_transaction_byte_by_byte
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH] i2c: i801: fix potential race in i801_block_transaction_byte_by_byte
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 3/4] i2c: i801: Improve i801_block_transaction_byte_by_byte
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v11 4/4] gpio: update Intel LJCA USB GPIO driver
  • From: Wentong Wu <wentong.wu@xxxxxxxxx>
• [PATCH v11 3/4] spi: Add support for Intel LJCA USB SPI driver
  • From: Wentong Wu <wentong.wu@xxxxxxxxx>
• [PATCH v11 2/4] i2c: Add support for Intel LJCA USB I2C driver
  • From: Wentong Wu <wentong.wu@xxxxxxxxx>
• [PATCH v11 1/4] usb: Add support for Intel LJCA device
  • From: Wentong Wu <wentong.wu@xxxxxxxxx>
• [PATCH v11 0/4] Add Intel LJCA device driver
  • From: Wentong Wu <wentong.wu@xxxxxxxxx>
• RE: [PATCH v10 2/4] i2c: Add support for Intel LJCA USB I2C driver
  • From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
• Re: [PATCH] i2c: i801: fix cleanup code in remove() and error path of probe()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 5/8] I2C: ali15x3: Do PCI error checks on own line
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v10 2/4] i2c: Add support for Intel LJCA USB I2C driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: iproc: handle invalid slave state
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: iproc: handle invalid slave state
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH 3/4] i2c: i801: Improve i801_block_transaction_byte_by_byte
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 3/4] i2c: i801: Improve i801_block_transaction_byte_by_byte
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RESEND] i2c: at91: Use dev_err_probe() instead of dev_err()
  • From: Yann Sionneau <yann@xxxxxxxxxxxx>
• Re: [PATCH RESEND] i2c: at91: Use dev_err_probe() instead of dev_err()
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: wmt: split out i2c-viai2c-common.{c,h}
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v10 4/4] gpio: update Intel LJCA USB GPIO driver
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 1/2] i2c: wmt: split out i2c-viai2c-common.{c,h}
  • From: Hans Hu <HansHu-oc@xxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: i801: Replace acpi_lock with I2C bus lock
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2 1/2] i2c: wmt: split out i2c-viai2c-common.{c,h}
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: add support for Zhaoxin I2C controller
  • From: Hans Hu <HansHu-oc@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: wmt: split out i2c-viai2c-common.{c,h}
  • From: Hans Hu <HansHu-oc@xxxxxxxxxxx>
• [PATCH] i2c: i801: fix cleanup code in remove() and error path of probe()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 3/4] i2c: i801: Improve i801_block_transaction_byte_by_byte
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 2/4] i2c: i801: Replace acpi_lock with I2C bus lock
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 1/4] i2c: i801: Use i2c_mark_adapter_suspended/resumed
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 5/8] I2C: ali15x3: Do PCI error checks on own line
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• [PATCH] i2c: mt65xx: allow optional pmic clock
  • From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
• [PATCH v10 4/4] gpio: update Intel LJCA USB GPIO driver
  • From: Wentong Wu <wentong.wu@xxxxxxxxx>
• [PATCH v10 1/4] usb: Add support for Intel LJCA device
  • From: Wentong Wu <wentong.wu@xxxxxxxxx>
• [PATCH v10 3/4] spi: Add support for Intel LJCA USB SPI driver
  • From: Wentong Wu <wentong.wu@xxxxxxxxx>
• [PATCH v10 2/4] i2c: Add support for Intel LJCA USB I2C driver
  • From: Wentong Wu <wentong.wu@xxxxxxxxx>
• [PATCH v10 0/4] Add Intel LJCA device driver
  • From: Wentong Wu <wentong.wu@xxxxxxxxx>
• Re: [PATCH] i2c: pxa: fix clang -Wvoid-pointer-to-enum-cast warning
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: pxa: fix clang -Wvoid-pointer-to-enum-cast warning
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Re: [PATCH] i2c: pxa: fix clang -Wvoid-pointer-to-enum-cast warning
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• Re: [PATCH] i2c: pxa: fix clang -Wvoid-pointer-to-enum-cast warning
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: Make I2C_ATR invisible
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/4] i2c: mv64xxx: devm_pinctrl_get() cannot return NULL
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH -next v3] I2C: Make return value check more accurate and explicit for devm_pinctrl_get()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v6] i2c: designware: Add support for recovery when GPIO need pinctrl.
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH i2c-next 1/2] i2c: mlxcpld: Allow driver to run on ARM64 architecture
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH i2c-next 2/2] i2c: mlxcpld: Add support for extended transaction length
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH next] i2c: qcom-cci: Fix error checking in cci_probe()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: add support for Zhaoxin I2C controller
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: wmt: split out i2c-viai2c-common.{c,h}
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH RESEND] i2c: at91: Use dev_err_probe() instead of dev_err()
  • From: Yann Sionneau <yann@xxxxxxxxxxxx>
• Re: [PATCH] i2c: at91: Use dev_err_probe() instead of dev_err()
  • From: Yann Sionneau <yann@xxxxxxxxxxxx>
• [PATCH] i2c: at91: Use dev_err_probe() instead of dev_err()
  • From: Yann Sionneau <yann@xxxxxxxxxxxx>
• Re: [PATCH 07/14] I2C: ali15x3: Do PCI error checks on own line
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• [PATCH] i2c: iproc: handle invalid slave state
  • From: roman.bacik@xxxxxxxxxxxx
• Re: [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [RFC] i2c: whether need create *-common.{c,h} for i801 piix4 viapro driver
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 0/8] i2c: sprd: Modification of UNIOC Platform IIC Driver
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v6] i2c: designware: Add support for recovery when GPIO need pinctrl.
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH -next v3] I2C: Make return value check more accurate and explicit for devm_pinctrl_get()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH next] i2c: qcom-cci: Fix error checking in cci_probe()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 09/14] I2C: sis5595: Do PCI error checks on own line
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 08/14] I2C: nforce2: Do PCI error check on own line
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 07/14] I2C: ali15x3: Do PCI error checks on own line
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 07/14] I2C: ali15x3: Do PCI error checks on own line
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• [PATCH 09/14] I2C: sis5595: Do PCI error checks on own line
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• [PATCH 08/14] I2C: nforce2: Do PCI error check on own line
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• RE: [PATCH v10] i2c: Add support for Intel LJCA USB I2C driver
  • From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH v10] i2c: Add support for Intel LJCA USB I2C driver
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH v10] i2c: Add support for Intel LJCA USB I2C driver
  • From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
• Re: [PATCH next] i2c: qcom-cci: Fix error checking in cci_probe()
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH -next v3] I2C: Make return value check more accurate and explicit for devm_pinctrl_get()
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v6] i2c: designware: Add support for recovery when GPIO need pinctrl.
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH v9 4/4] gpio: update Intel LJCA USB GPIO driver
  • From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
• Re: [PATCH] i2c: cadence: Fix the kernel-doc warnings
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] media: dt-bindings: Convert Omnivision OV7251 to DT schema
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v15 4/4] i2c: muxes: pca954x: Add regulator support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v15 1/4] dt-bindings: i2c: pca954x: Correct interrupt support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v15 3/4] i2c: muxes: pca954x: Add MAX735x/MAX736x support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v15 2/4] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v15 1/4] dt-bindings: i2c: pca954x: Correct interrupt support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH next] i2c: qcom-cci: Fix error checking in cci_probe()
  • From: Harshit Mogalapalli <harshit.m.mogalapalli@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v9 4/4] gpio: update Intel LJCA USB GPIO driver
  • From: "sakari.ailus@xxxxxxxxxxxxxxx" <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] dt-bindings: Drop remaining unneeded quotes
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH i2c-mux-next v2 1/1] i2c: mux: Add register map based mux driver
  • From: Vadim Pasternak <vadimp@xxxxxxxxxx>
• [PATCH i2c-mux-next v2 0/1] mux: Add regmap based mux driver
  • From: Vadim Pasternak <vadimp@xxxxxxxxxx>
• Re: [PATCH i2c-mux-next 1/1] i2c: mux: Add register map based mux driver
  • From: Yann Sionneau <ysionneau@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: designware: add support for pinctrl for recovery
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH i2c-mux-next 1/1] i2c: mux: Add register map based mux driver
  • From: Vadim Pasternak <vadimp@xxxxxxxxxx>
• [PATCH i2c-mux-next 0/1] mux: Add regmap based mux driver
  • From: Vadim Pasternak <vadimp@xxxxxxxxxx>
• Re: [v16 4/4] i2c: muxes: pca954x: Add regulator support
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [v16 2/4] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [v16 1/4] dt-bindings: i2c: pca954x: Correct interrupt support
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [v16 3/4] i2c: muxes: pca954x: Add MAX735x/MAX736x support
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH v10] i2c: Add support for Intel LJCA USB I2C driver
  • From: Wentong Wu <wentong.wu@xxxxxxxxx>
• [PATCH i2c-next 2/2] i2c: mlxcpld: Add support for extended transaction length
  • From: Vadim Pasternak <vadimp@xxxxxxxxxx>
• [PATCH i2c-next 1/2] i2c: mlxcpld: Allow driver to run on ARM64 architecture
  • From: Vadim Pasternak <vadimp@xxxxxxxxxx>
• [PATCH i2c-next 0/2] i2c: mlxcpld: Extend driver functionality and allow to run on ARM64
  • From: Vadim Pasternak <vadimp@xxxxxxxxxx>
• Re: [PATCH v6] i2c: designware: Add support for recovery when GPIO need pinctrl.
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v6] i2c: designware: Add support for recovery when GPIO need pinctrl.
  • From: Yann Sionneau <ysionneau@xxxxxxxxx>
• Re: [PATCH v5] i2c: designware: Currently if the SoC needs pinctrl to switch the SCL and SDA from the I2C function to GPI
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4] Currently if the SoC needs pinctrl to switch the SCL and SDA from the I2C function to GPI
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5] i2c: designware: Currently if the SoC needs pinctrl to switch the SCL and SDA from the I2C function to GPI
  • From: Yann Sionneau <ysionneau@xxxxxxxxxxxxx>
• [PATCH v5] i2c: designware: Currently if the SoC needs pinctrl to switch the SCL and SDA from the I2C function to GPI
  • From: Yann Sionneau <ysionneau@xxxxxxxxx>
• Re: [PATCH v4] Currently if the SoC needs pinctrl to switch the SCL and SDA from the I2C function to GPI
  • From: Yann Sionneau <ysionneau@xxxxxxxxxxxxx>
• Re: [PATCH v4] Currently if the SoC needs pinctrl to switch the SCL and SDA from the I2C function to GPI
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v4] Currently if the SoC needs pinctrl to switch the SCL and SDA from the I2C function to GPI
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4] Currently if the SoC needs pinctrl to switch the SCL and SDA from the I2C function to GPI
  • From: Yann Sionneau <ysionneau@xxxxxxxxx>
• Re: [PATCH v3] Currently if the SoC needs pinctrl to switch the SCL and SDA from the I2C function to GPIO function, the recovery won't work.
  • From: Yann Sionneau <ysionneau@xxxxxxxxxxxxx>
• Re: [PATCH v3] Currently if the SoC needs pinctrl to switch the SCL and SDA from the I2C function to GPIO function, the recovery won't work.
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] Currently if the SoC needs pinctrl to switch the SCL and SDA from the I2C function to GPIO function, the recovery won't work.
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] Currently if the SoC needs pinctrl to switch the SCL and SDA from the I2C function to GPIO function, the recovery won't work.
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: designware: fix __i2c_dw_disable() in case master is holding SCL low
  • From: Yann Sionneau <ysionneau@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: designware: fix __i2c_dw_disable() in case master is holding SCL low
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH v3] i2c: designware: fix __i2c_dw_disable() in case master is holding SCL low
  • From: Yann Sionneau <ysionneau@xxxxxxxxx>
• [PATCH v3] Currently if the SoC needs pinctrl to switch the SCL and SDA from the I2C function to GPIO function, the recovery won't work.
  • From: Yann Sionneau <ysionneau@xxxxxxxxx>
• Re: [PATCH v2] i2c: designware: fix __i2c_dw_disable() in case master is holding SCL low
  • From: Yann Sionneau <ysionneau@xxxxxxxxxxxxx>
• Re: [PATCH 5/9] i2c: qcom-cci: Use dev_err_probe in probe function
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 5/9] i2c: qcom-cci: Use dev_err_probe in probe function
  • From: Harshit Mogalapalli <harshit.m.mogalapalli@xxxxxxxxxx>
• Re: [PATCH v2] i2c: designware: fix __i2c_dw_disable() in case master is holding SCL low
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2] i2c: designware: fix __i2c_dw_disable() in case master is holding SCL low
  • From: Yann Sionneau <yann@xxxxxxxxxxxx>
• Re: [PATCH v2] i2c: designware: add support for pinctrl for recovery
  • From: "Yann" <yann@xxxxxxxxxxxx>
• RE: [PATCH v9 2/4] i2c: Add support for Intel LJCA USB I2C driver
  • From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
• [v16 3/4] i2c: muxes: pca954x: Add MAX735x/MAX736x support
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [v16 2/4] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [v16 4/4] i2c: muxes: pca954x: Add regulator support
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [v16 1/4] dt-bindings: i2c: pca954x: Correct interrupt support
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [v16 0/4] Add support for Maxim MAX735x/MAX736x variants
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• Re: [PATCH v15 3/4] i2c: muxes: pca954x: Add MAX735x/MAX736x support
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [PATCH -next v3] I2C: Make return value check more accurate and explicit for devm_pinctrl_get()
  • From: Jinjie Ruan <ruanjinjie@xxxxxxxxxx>
• Re: [PATCH -next v2 RESEND] I2C: Fix return value check for devm_pinctrl_get()
  • From: Ruan Jinjie <ruanjinjie@xxxxxxxxxx>
• Re: [PATCH v9 2/4] i2c: Add support for Intel LJCA USB I2C driver
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v15 3/4] i2c: muxes: pca954x: Add MAX735x/MAX736x support
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2] i2c: designware: add support for pinctrl for recovery
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PULL REQUEST] i2c-for-6.5-rc7
  • From: pr-tracker-bot@xxxxxxxxxx
• [PULL REQUEST] i2c-for-6.5-rc7
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH -next v2 RESEND] I2C: Fix return value check for devm_pinctrl_get()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH -next v2 RESEND] I2C: Fix return value check for devm_pinctrl_get()
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: cadence: Fix the kernel-doc warnings
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH -next v2 RESEND] I2C: Fix return value check for devm_pinctrl_get()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH -next v2 RESEND] I2C: Fix return value check for devm_pinctrl_get()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] i2c: designware: add support for pinctrl for recovery
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/9] i2c: qcom-cci: Use dev_err_probe in probe function
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] i2c: cadence: Fix the kernel-doc warnings
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxx>
• Re: [PATCH -next v2 RESEND] I2C: Fix return value check for devm_pinctrl_get()
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• [PATCH -next v2 RESEND] I2C: Fix return value check for devm_pinctrl_get()
  • From: Ruan Jinjie <ruanjinjie@xxxxxxxxxx>
• Re: [PATCH -next v2] I2C: Fix return value check for devm_pinctrl_get()
  • From: Ruan Jinjie <ruanjinjie@xxxxxxxxxx>
• Re: [PATCH -next v2] I2C: Fix return value check for devm_pinctrl_get()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH -next v2] I2C: Fix return value check for devm_pinctrl_get()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH -next v2] I2C: Fix return value check for devm_pinctrl_get()
  • From: Ruan Jinjie <ruanjinjie@xxxxxxxxxx>
• Re: [PATCH -next v2] I2C: Fix return value check for devm_pinctrl_get()
  • From: Ruan Jinjie <ruanjinjie@xxxxxxxxxx>
• Re: [PATCH -next v2] I2C: Fix return value check for devm_pinctrl_get()
  • From: Yann Sionneau <yann@xxxxxxxxxxxx>
• [PATCH v2] media: dt-bindings: Convert Omnivision OV7251 to DT schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• RE: [PATCH -next v2] I2C: Fix return value check for devm_pinctrl_get()
  • From: Leo Li <leoyang.li@xxxxxxx>
• Re: [PATCH v15 1/4] dt-bindings: i2c: pca954x: Correct interrupt support
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v15 0/4] Add support for Maxim MAX735x/MAX736x variants
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v15 4/4] i2c: muxes: pca954x: Add regulator support
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v15 3/4] i2c: muxes: pca954x: Add MAX735x/MAX736x support
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v15 2/4] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH -next v2] I2C: Fix return value check for devm_pinctrl_get()
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: designware: abort the transfer if receiving byte count of 0
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: designware: abort the transfer if receiving byte count of 0
  • From: Yann Sionneau <yann@xxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: fix __i2c_dw_disable in case master is holding SCL low
  • From: Yann Sionneau <yann@xxxxxxxxxxxx>
• Re: [PATCH v2] i2c: designware: add support for pinctrl for recovery
  • From: Yann Sionneau <yann@xxxxxxxxxxxx>
• Re: [PATCH 2/8] i2c: sprd: Add I2C driver to use 'reset framework' function
  • From: Yann Sionneau <yann@xxxxxxxxxxxx>
• Re: [PATCH 1/8] i2c: sprd: Add configurations that support 1Mhz and 3.4Mhz frequencies
  • From: Yann Sionneau <yann@xxxxxxxxxxxx>
• Re: [PATCH] i2c: Drop legacy callback .probe_new()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] i2c: Make I2C_ATR invisible
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH 8/8] i2c: sprd: Increase the waiting time for IIC transmission to avoid system crash issues
  • From: Huangzheng Lai <Huangzheng.Lai@xxxxxxxxxx>
• [PATCH 7/8] i2c: sprd: Set I2C_RX_ACK when clear irq
  • From: Huangzheng Lai <Huangzheng.Lai@xxxxxxxxxx>
• [PATCH 6/8] i2c: sprd: Add additional IIC control bit configuration to adapt to the new IP version of the UNISOC platform
  • From: Huangzheng Lai <Huangzheng.Lai@xxxxxxxxxx>
• [PATCH 5/8] i2c: sprd: Configure the enable bit of the IIC controller before each transmission initiation
  • From: Huangzheng Lai <Huangzheng.Lai@xxxxxxxxxx>
• [PATCH 4/8] i2c: sprd: Add IIC controller driver to support dynamic switching of 400K/1M/3.4M frequency
  • From: Huangzheng Lai <Huangzheng.Lai@xxxxxxxxxx>
• [PATCH 3/8] i2c: sprd: Use global variables to record IIC ack/nack status instead of local variables
  • From: Huangzheng Lai <Huangzheng.Lai@xxxxxxxxxx>
• [PATCH 2/8] i2c: sprd: Add I2C driver to use 'reset framework' function
  • From: Huangzheng Lai <Huangzheng.Lai@xxxxxxxxxx>
• [PATCH 1/8] i2c: sprd: Add configurations that support 1Mhz and 3.4Mhz frequencies
  • From: Huangzheng Lai <Huangzheng.Lai@xxxxxxxxxx>
• [PATCH 0/8] i2c: sprd: Modification of UNIOC Platform IIC Driver
  • From: Huangzheng Lai <Huangzheng.Lai@xxxxxxxxxx>
• Re: [PATCH v2] i2c: designware: add support for pinctrl for recovery
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Make I2C_ATR invisible
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• [PATCH v15 4/4] i2c: muxes: pca954x: Add regulator support
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [PATCH v15 3/4] i2c: muxes: pca954x: Add MAX735x/MAX736x support
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [PATCH v15 2/4] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [PATCH v15 1/4] dt-bindings: i2c: pca954x: Correct interrupt support
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [PATCH v15 0/4] Add support for Maxim MAX735x/MAX736x variants
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• RE: [PATCH v9 4/4] gpio: update Intel LJCA USB GPIO driver
  • From: "Wu, Wentong" <wentong.wu@xxxxxxxxx>
• Re: [PATCH v9 4/4] gpio: update Intel LJCA USB GPIO driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH -next v2] I2C: Fix return value check for devm_pinctrl_get()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 4/4] i2c: imx: devm_pinctrl_get() cannot return NULL
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH -next v2] I2C: Fix return value check for devm_pinctrl_get()
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH -next v2] I2C: Fix return value check for devm_pinctrl_get()
  • From: Ruan Jinjie <ruanjinjie@xxxxxxxxxx>
• Re: [PATCH -next] I2C: Use helper function IS_ERR_OR_NULL()
  • From: Ruan Jinjie <ruanjinjie@xxxxxxxxxx>
• Re: [PATCH -next] I2C: Use helper function IS_ERR_OR_NULL()
  • From: Ruan Jinjie <ruanjinjie@xxxxxxxxxx>
• [PATCH] i2c:octeon:Add block-mode r/w
  • From: Aryan Srivastava <aryan.srivastava@xxxxxxxxxxxxxxxxxxx>
• [PATCH v9 3/4] spi: Add support for Intel LJCA USB SPI driver
  • From: Wentong Wu <wentong.wu@xxxxxxxxx>
• [PATCH v9 4/4] gpio: update Intel LJCA USB GPIO driver
  • From: Wentong Wu <wentong.wu@xxxxxxxxx>
• [PATCH v9 2/4] i2c: Add support for Intel LJCA USB I2C driver
  • From: Wentong Wu <wentong.wu@xxxxxxxxx>
• [PATCH v9 0/4] Add Intel LJCA device driver
  • From: Wentong Wu <wentong.wu@xxxxxxxxx>
• [PATCH v9 1/4] usb: Add support for Intel LJCA device
  • From: Wentong Wu <wentong.wu@xxxxxxxxx>
• [PATCH 4/4] i2c: imx: devm_pinctrl_get() cannot return NULL
  • From: Yann Sionneau <yann@xxxxxxxxxxxx>
• [PATCH 3/4] i2c: i2c-cadence: Reset pinctrl to NULL in case devm_pinctrl_get() fails
  • From: Yann Sionneau <yann@xxxxxxxxxxxx>
• [PATCH 1/4] i2c: mv64xxx: devm_pinctrl_get() cannot return NULL
  • From: Yann Sionneau <yann@xxxxxxxxxxxx>
• [PATCH 2/4] i2c: at91-master: devm_pinctrl_get() cannot return NULL
  • From: Yann Sionneau <yann@xxxxxxxxxxxx>
• [PATCH 0/4] i2c: devm_pinctrl_get() usage fixes
  • From: Yann Sionneau <yann@xxxxxxxxxxxx>
• [PATCH] i2c: pxa: fix clang -Wvoid-pointer-to-enum-cast warning
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• Re: [PATCH -next RESEND] I2C: Use helper function IS_ERR_OR_NULL()
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH -next] I2C: Use helper function IS_ERR_OR_NULL()
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH -next] I2C: Use helper function IS_ERR_OR_NULL()
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH -next] I2C: Use helper function IS_ERR_OR_NULL()
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• [PATCH v2] i2c: designware: add support for pinctrl for recovery
  • From: Yann Sionneau <yann@xxxxxxxxxxxx>
• Re: [PATCH -next] I2C: Use helper function IS_ERR_OR_NULL()
  • From: Yann Sionneau <yann@xxxxxxxxxxxx>
• [PATCH -next RESEND] I2C: Use helper function IS_ERR_OR_NULL()
  • From: Ruan Jinjie <ruanjinjie@xxxxxxxxxx>
• Re: [PATCH -next] I2C: Use helper function IS_ERR_OR_NULL()
  • From: Ruan Jinjie <ruanjinjie@xxxxxxxxxx>
• [PATCH -next] I2C: Use helper function IS_ERR_OR_NULL()
  • From: Ruan Jinjie <ruanjinjie@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: add support for pinctrl for recovery
  • From: Yann Sionneau <yann@xxxxxxxxxxxx>
• Re: [PATCH] i2c: Make I2C_ATR invisible
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Make I2C_ATR invisible
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3] i2c: stm32f7: Add atomic_xfer method to driver
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v2] i2c: stm32f7: Add atomic_xfer method to driver
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v2] i2c: stm32f7: Add atomic_xfer method to driver
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v2] i2c: stm32f7: Add atomic_xfer method to driver
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: i2c: add binding for i2c-hotplug-gpio
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: Make I2C_ATR invisible
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH RFC 1/4] i2c: start migrating to a pointer in i2c_device_id
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH RFC 4/4] i2c: slave-eeprom: convert to using a pointer in i2c_device_id
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH RFC 3/4] i2c: mux: pca954x: convert to using a pointer in i2c_device_id
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH RFC 2/4] i2c: mux: ltc4306: convert to using a pointer in i2c_device_id
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] i2c: Make I2C_ATR invisible
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [PATCH v1 2/2] hwmon: pmbus: Add ltc4286 driver
  • From: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu@xxxxxxxxxx>
• Re: [PATCH] i2c: hisi: Only handle the interrupt of the driver's transfer
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add GPIO-based hotplug gate
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH RFC 2/4] i2c: mux: ltc4306: convert to using a pointer in i2c_device_id
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH RFC 3/4] i2c: mux: pca954x: convert to using a pointer in i2c_device_id
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH RFC 0/4] Start unification of of_device_id and i2c_device_id
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH RFC 4/4] i2c: slave-eeprom: convert to using a pointer in i2c_device_id
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH RFC 1/4] i2c: start migrating to a pointer in i2c_device_id
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2] i2c: bcm-iproc: Fix bcm_iproc_i2c_isr deadlock issue
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: Update documentation to use .probe() again
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 01/11] i2c: at91: Use devm_platform_get_and_ioremap_resource()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4] i2c: gpio: Fix an error check in i2c_gpio_fault_injector_init()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: tegra: Fix i2c-tegra DMA config option processing
  • From: Parker Newman <pnewman@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: sun6i-p2wi: Fix an error message in probe()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] I2C: Explicitly include correct DT includes
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: tegra: Fix i2c-tegra DMA config option processing
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v3 0/9] Use dev_err_probe in i2c probe function
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH -next] i2c: mux: ltc4306: Remove an unnecessary ternary operator
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH -next] i2c: stm32: fix the return value handle for platform_get_irq()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: i2c: nxp,pca9541: convert to DT schema
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: cadence: Describe power-domains property
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH -next v2] i2c: remove redundant dev_err_probe()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: imx: Clean up a call to request_irq()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 00/22] i2c: Use new PM macros
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH -next] i2c: s3c2410: Remove redundant dev_err()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4] i2c: imx-lpi2c: directly return ISR when detect a NACK
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• RE: [PATCH] i2c: tegra: Fix i2c-tegra DMA config option processing
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH v4 02/11] dt-bindings: treewide: add feature-domains description
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: hisi: Only handle the interrupt of the driver's transfer
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: tegra: Fix i2c-tegra DMA config option processing
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: tegra: Fix i2c-tegra DMA config option processing
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: tegra: Fix failure during probe deferral cleanup
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: designware: Handle invalid SMBus block data response length value
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: designware: Correct length byte validation logic
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5] i2c: imx-lpi2c: return -EINVAL when i2c peripheral clk doesn't work
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: Wolfram have computer problems
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: tiny-usb: check usb base class before assuming the interface on device is for this driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• RE: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [linux@xxxxxxxxxxxx: Re: Functional enhancement of max31827]
  • From: Daniel Matyas <daniel.matyas23@xxxxxxxxx>
• [PATCH] drivers:i2c:add controller reset when the timeout occurred
  • From: Tommy Huang <tommy_huang@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] i2c: add support for Zhaoxin I2C controller
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v2 1/2] i2c: wmt: split out i2c-viai2c-common.{c,h}
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v2 2/2] i2c: add support for Zhaoxin I2C controller
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: i2c: add binding for i2c-hotplug-gpio
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH v4 05/11] firewall: introduce stm32_firewall framework
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: i2c: add binding for i2c-hotplug-gpio
  • From: Rob Herring <robh@xxxxxxxxxx>
• RE: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: add support for pinctrl for recovery
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: designware: abort the transfer if receiving byte count of 0
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: fix __i2c_dw_disable in case master is holding SCL low
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] i2c: designware: add support for pinctrl for recovery
  • From: Yann Sionneau <yann@xxxxxxxxxxxx>
• RE: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 1/2] i2c: designware: fix __i2c_dw_disable in case master is holding SCL low
  • From: Yann Sionneau <yann@xxxxxxxxxxxx>
• [PATCH 2/2] i2c: designware: abort the transfer if receiving byte count of 0
  • From: Yann Sionneau <yann@xxxxxxxxxxxx>
• Re: [IGNORE][PATCH v4 01/11] dt-bindings: Document common device controller bindings
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• Re: [IGNORE][PATCH v4 01/11] dt-bindings: Document common device controller bindings
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 10/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v4 11/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v4 09/11] bus: etzpc: introduce ETZPC firewall controller driver
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v4 08/11] arm64: dts: st: add RIFSC as a domain controller for STM32MP25x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v4 07/11] bus: rifsc: introduce RIFSC firewall controller driver
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v4 05/11] firewall: introduce stm32_firewall framework
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v4 04/11] dt-bindings: bus: document ETZPC
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v4 06/11] of: property: fw_devlink: Add support for "feature-domains"
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v4 02/11] dt-bindings: treewide: add feature-domains description
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v4 00/11] Introduce STM32 Firewall framework
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v4 03/11] dt-bindings: bus: document RIFSC
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [IGNORE][PATCH v4 01/11] dt-bindings: Document common device controller bindings
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• i801: async probe causing problems on Dell S52xxF-ON switches
  • From: Marcus Heese <marcus@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add GPIO-based hotplug gate
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add GPIO-based hotplug gate
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• [PATCH] i2c: dev: make i2c_dev_class a static const structure
  • From: Ivan Orlov <ivan.orlov0322@xxxxxxxxx>
• Re: [PATCH v2 08/22] i2c: i801: Remove #ifdef guards for PM related functions
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] i2c/busses: fix -Wmissing-variable-declarations
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 5/9] i2c: qcom-cci: Use dev_err_probe in probe function
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: i2c-bcm-iproc: fix -Wvoid-pointer-to-enum-cast warning
  • From: Nathan Chancellor <nathan@xxxxxxxxxx>
• Re: [PATCH 0/3] Add support for Intel Alder Lake PCH
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/3] Add support for Intel Alder Lake PCH
  • From: Alexander Ofitserov <oficerovas@xxxxxxxxxxxx>
• [PATCH 0/3] Add support for Intel Alder Lake PCH
  • From: Alexander Ofitserov <oficerovas@xxxxxxxxxxxx>
• [PATCH 0/3] Add support for Intel Alder Lake PCH
  • From: Alexander Ofitserov <oficerovas@xxxxxxxxxxxx>
• [PATCH 1/3] i2c: i801: Add support for Intel Alder Lake PCH
  • From: Alexander Ofitserov <oficerovas@xxxxxxxxxxxx>
• [RFC] i2c: whether need create *-common.{c,h} for i801 piix4 viapro driver
  • From: Hans Hu <HansHu-oc@xxxxxxxxxxx>
• 撤回: [RFC] i2c: whether need create *-common.{c,h} for i801 piix4 viapro driver
  • From: HansHu-oc <HansHu-oc@xxxxxxxxxxx>
• RE: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: i2c-bcm-iproc: fix -Wvoid-pointer-to-enum-cast warning
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 0/9] Use dev_err_probe in i2c probe function
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 9/9] i2c: synquacer: Use dev_err_probe in probe function
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH] i2c: aspeed: Fix i2c bus hang in slave read
  • From: Jian Zhang <zhangjian.3032@xxxxxxxxxxxxx>
• Re: [PATCH v3 9/9] i2c: synquacer: Use dev_err_probe in probe function
  • From: "Liao, Chang" <liaochang1@xxxxxxxxxx>
• [PATCH 0/2] i2c: fix -Wvoid-pointer-to-enum-cast warnings
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• [PATCH 1/2] i2c: i2c-bcm-iproc: fix -Wvoid-pointer-to-enum-cast warning
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• [PATCH 2/2] i2c: i2c-rcar: fix -Wvoid-pointer-to-enum-cast warning
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• Re: [PATCH] i2c: hisi: Only handle the interrupt of the driver's transfer
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: hisi: Only handle the interrupt of the driver's transfer
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 9/9] i2c: synquacer: Use dev_err_probe in probe function
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c/busses: fix -Wmissing-variable-declarations
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 2/9] i2c: mlxbf: Use dev_err_probe in probe function
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH v3] i2c: imx-lpi2c: add bus recovery feature
  • From: carlos.song@xxxxxxx
• Re: [PATCH] i2c: tegra: Fix i2c-tegra DMA config option processing
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 2/9] i2c: mlxbf: Use dev_err_probe in probe function
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH] i2c/busses: fix -Wmissing-variable-declarations
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• Re: [PATCH v3 2/9] i2c: mlxbf: Use dev_err_probe in probe function
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] i2c: hisi: Only handle the interrupt of the driver's transfer
  • From: Yicong Yang <yangyicong@xxxxxxxxxx>
• Re: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/9] i2c: mlxbf: Use dev_err_probe in probe function
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 3/9] i2c: xlp9xx: Use dev_err_probe in probe function
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 2/9] i2c: mlxbf: Use dev_err_probe in probe function
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 1/9] i2c: bcm2835: Use dev_err_probe in probe function
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 8/9] i2c: imx-lpi2c: Use dev_err_probe in probe function
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/9] i2c: mlxbf: Use dev_err_probe in probe function
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 4/9] i2c: hisi: Use dev_err_probe in probe function
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] i2c: tegra: Fix i2c-tegra DMA config option processing
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 9/9] i2c: synquacer: Use dev_err_probe in probe function
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] i2c: tegra: Fix i2c-tegra DMA config option processing
  • From: Parker Newman <pnewman@xxxxxxxxxxxxxxx>
• RE: [PATCH 1/2] dt-bindings: hwmon: Add lltc ltc4286 driver bindings
  • From: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu@xxxxxxxxxx>
• [PATCH v3 9/9] i2c: synquacer: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH v3 7/9] i2c: dln2: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH v3 8/9] i2c: imx-lpi2c: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH v3 5/9] i2c: qcom-cci: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH v3 6/9] i2c: pxa: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH v3 3/9] i2c: xlp9xx: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH v3 4/9] i2c: hisi: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH v3 2/9] i2c: mlxbf: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH v3 1/9] i2c: bcm2835: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH v3 0/9] Use dev_err_probe in i2c probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• Re: [PATCH 8/9] i2c: imx-lpi2c: Use dev_err_probe in probe function
  • From: "Liao, Chang" <liaochang1@xxxxxxxxxx>
• Re: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 9/9] i2c: designware: Fix spelling and other issues in the comments
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 9/9] i2c: designware: Fix spelling and other issues in the comments
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 5/9] i2c: designware: Always provide ID tables
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 4/9] i2c: designware: Propagate firmware node
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 8/9] i2c: imx-lpi2c: Use dev_err_probe in probe function
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 8/9] i2c: imx-lpi2c: Use dev_err_probe in probe function
  • From: "Liao, Chang" <liaochang1@xxxxxxxxxx>
• Re: [PATCH 8/9] i2c: imx-lpi2c: Use dev_err_probe in probe function
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 0/9] Use dev_err_probe in i2c probe function
  • From: "Liao, Chang" <liaochang1@xxxxxxxxxx>
• Re: [PATCH 8/9] i2c: imx-lpi2c: Use dev_err_probe in probe function
  • From: "Liao, Chang" <liaochang1@xxxxxxxxxx>
• RE: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH] i2c: tegra: Fix the check during DMA channel release
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• RE: [PATCH] i2c: tegra: Fix i2c-tegra DMA config option processing
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: i2c: add binding for i2c-hotplug-gpio
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add GPIO-based hotplug gate
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: Update documentation to use .probe() again
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: Drop legacy callback .probe_new()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• RE: [PATCH v2 2/2] i2c: mux: ltc4306: Drop enum ltc_type and split chips[]
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: mux: ltc4306: Drop enum ltc_type and split chips[]
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: mux: ltc4306: Drop enum ltc_type and split chips[]
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: tegra: Fix the check during DMA channel release
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH -next] i2c: mux: ltc4306: Remove an unnecessary ternary operator
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 0/4] i2c: thunderx: Marvell thunderx i2c changes
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH -next] i2c: mux: ltc4306: Remove an unnecessary ternary operator
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: Avoid accessing freed buffers during i2c transfers.
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH -next] i2c: stm32: fix the return value handle for platform_get_irq()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH -next] i2c: stm32: fix the return value handle for platform_get_irq()
  • From: Ruan Jinjie <ruanjinjie@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: cadence: Describe power-domains property
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: ocores: Move system PM hooks to the NOIRQ phase
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add GPIO-based hotplug gate
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: hisi: Only handle the interrupt of the driver's transfer
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 0/9] Use dev_err_probe in i2c probe function
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 9/9] i2c: synquacer: Use dev_err_probe in probe function
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 8/9] i2c: imx-lpi2c: Use dev_err_probe in probe function
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 2/9] i2c: mlxbf: Use dev_err_probe in probe function
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: tegra: Fix i2c-tegra DMA config option processing
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: tegra: Fix i2c-tegra DMA config option processing
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v1 9/9] i2c: designware: Fix spelling and other issues in the comments
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v1 7/9] i2c: desingware: Unify firmware type checks
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v1 8/9] i2c: designware: Get rid of redundant 'else'
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v1 6/9] i2c: designware: Consolidate firmware parsing and configure code
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v1 5/9] i2c: designware: Always provide ID tables
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v1 4/9] i2c: designware: Propagate firmware node
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH v7 4/4] i2c: Add i2c_device_get_match_data() callback
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v7 3/4] i2c: i2c-core-of: Convert i2c_of_match_device_sysfs() to non-static
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v7 2/4] i2c: Enhance i2c_get_match_data()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v7 1/4] drivers: fwnode: Extend device_get_match_data() to struct bus_type
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v7 0/4] Extend device_get_match_data() to struct bus_type
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: hwmon: Add lltc ltc4286 driver bindings
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• RE: [PATCH v6 4/4] i2c: Add i2c_device_get_match_data() callback
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v6 3/4] i2c: Enhance i2c_get_match_data()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v6 4/4] i2c: Add i2c_device_get_match_data() callback
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 4/4] i2c: Add i2c_device_get_match_data() callback
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 3/4] i2c: Enhance i2c_get_match_data()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 1/4] drivers: fwnode: Extend device_get_match_data() to struct bus_type
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v6 4/4] i2c: Add i2c_device_get_match_data() callback
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v6 3/4] i2c: Enhance i2c_get_match_data()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v6 2/4] i2c: i2c-core-of: Convert i2c_of_match_device_sysfs() to non-static
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v6 1/4] drivers: fwnode: Extend device_get_match_data() to struct bus_type
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v6 0/4] Extend device_get_match_data() to struct bus_type
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: Wake up sequence of crypto - atmel-i2c
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• Re: [PATCH v5 RESEND 2/4] i2c: Add i2c_device_get_match_data() callback
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] i2c: tegra: Fix i2c-tegra DMA config option processing
  • From: Parker Newman <pnewman@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: cadence: Describe power-domains property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• RE: [PATCH v5 RESEND 2/4] i2c: Add i2c_device_get_match_data() callback
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/9] i2c: designware: Move has_acpi_companion() to common code
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 RESEND 0/4] Extend device_get_match_data() to struct bus_type
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 RESEND 4/4] i2c: Extend i2c_device_get_match_data() to support i2c sysfs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 RESEND 3/4] i2c: i2c-core-of: Convert i2c_of_match_device_sysfs() to non-static
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 RESEND 2/4] i2c: Add i2c_device_get_match_data() callback
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 RESEND 4/4] i2c: Extend i2c_device_get_match_data() to support i2c sysfs
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 RESEND 3/4] i2c: i2c-core-of: Convert i2c_of_match_device_sysfs() to non-static
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 RESEND 2/4] i2c: Add i2c_device_get_match_data() callback
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 RESEND 0/4] Extend device_get_match_data() to struct bus_type
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v5 0/4] Extend device_get_match_data() to struct bus_type
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 3/4] i2c: i2c-core-of: Convert i2c_of_match_device_sysfs() to non-static
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 0/4] Extend device_get_match_data() to struct bus_type
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 4/4] i2c: Extend i2c_device_get_match_data() to support i2c sysfs
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 2/4] i2c: Add i2c_device_get_match_data() callback
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 0/4] Extend device_get_match_data() to struct bus_type
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Wake up sequence of crypto - atmel-i2c
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• [PATCH] dt-bindings: i2c: cadence: Describe power-domains property
  • From: Michal Simek <michal.simek@xxxxxxx>
• RE: [PATCH v4 3/3] i2c: Extend i2c_device_get_match_data() to support i2c sysfs
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v4 3/3] i2c: Extend i2c_device_get_match_data() to support i2c sysfs
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v4 2/3] i2c: Add i2c_device_get_match_data() callback
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [RFC 2/2] i2c: add support for Zhaoxin I2C controller
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [RFC 1/2] i2c: separate i2c-viai2c-common from i2c-wmt
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [RFC 0/2] add support for Zhaoxin I2C controller
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• Re: [PATCH v4 3/3] i2c: Extend i2c_device_get_match_data() to support i2c sysfs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH -next v2] i2c: remove redundant dev_err_probe()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: imx: Clean up a call to request_irq()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH -next] i2c: s3c2410: Remove redundant dev_err()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 00/22] i2c: Use new PM macros
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: i2c: nxp,pca9541: convert to DT schema
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v4] i2c: imx-lpi2c: directly return ISR when detect a NACK
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 0/2] i2c: designware: Handle invalid SMBus block data response length value
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v5] i2c: imx-lpi2c: return -EINVAL when i2c peripheral clk doesn't work
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: tiny-usb: check usb base class before assuming the interface on device is for this driver
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v4 3/3] i2c: Extend i2c_device_get_match_data() to support i2c sysfs
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v4 2/3] i2c: Add i2c_device_get_match_data() callback
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add i2c_device_get_match_data() callback
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add i2c_device_get_match_data() callback
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add i2c_device_get_match_data() callback
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: Avoid accessing freed buffers during i2c transfers.
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v4 3/3] i2c: Extend i2c_device_get_match_data() to support i2c sysfs
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v4 2/3] i2c: Add i2c_device_get_match_data() callback
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v4 0/3] Extend device_get_match_data() to struct bus_type
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v3 2/2] i2c: Add i2c_device_get_match_data() callback
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: stm32f7: Add atomic_xfer method to driver
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH 8/9] i2c: imx-lpi2c: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH 2/9] i2c: mlxbf: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH 9/9] i2c: synquacer: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH 4/9] i2c: hisi: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH v2 0/9] Use dev_err_probe in i2c probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH 1/9] i2c: bcm2835: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH 6/9] i2c: pxa: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH 3/9] i2c: xlp9xx: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH 7/9] i2c: dln2: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH 5/9] i2c: qcom-cci: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• RE: [PATCH v3 2/2] i2c: Add i2c_device_get_match_data() callback
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH -next] i2c: stm32: fix the return value handle for platform_get_irq()
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• RE: [PATCH v3 2/2] i2c: Add i2c_device_get_match_data() callback
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH 9/9] i2c: synquacer: Use dev_err_probe in probe function
  • From: "Liao, Chang" <liaochang1@xxxxxxxxxx>
• RE: [PATCH v3 2/2] i2c: Add i2c_device_get_match_data() callback
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v1 1/2] dt-bindings: hwmon: Add lltc ltc4286 driver bindings
  • From: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu@xxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add i2c_device_get_match_data() callback
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add i2c_device_get_match_data() callback
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add i2c_device_get_match_data() callback
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add i2c_device_get_match_data() callback
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] i2c: hisi: Only handle the interrupt of the driver's transfer
  • From: Yicong Yang <yangyicong@xxxxxxxxxx>
• Re: [PATCH -next] i2c: stm32: fix the return value handle for platform_get_irq()
  • From: Ruan Jinjie <ruanjinjie@xxxxxxxxxx>
• Re: [PATCH -next] i2c: stm32: fix the return value handle for platform_get_irq()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH -next] i2c: stm32: fix the return value handle for platform_get_irq()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: hisi: Only handle the interrupt of the driver's transfer
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 9/9] i2c: synquacer: Use dev_err_probe in probe function
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 7/9] i2c: dln2: Use dev_err_probe in probe function
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 6/9] i2c: pxa: Use dev_err_probe in probe function
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 5/9] i2c: qcom-cci: Use dev_err_probe in probe function
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 3/9] i2c: xlp9xx: Use dev_err_probe in probe function
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 2/9] i2c: mlxbf: Use dev_err_probe in probe function
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add i2c_device_get_match_data() callback
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add i2c_device_get_match_data() callback
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add i2c_device_get_match_data() callback
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION a734662572708cf062e974f659ae50c24fc1ad17
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v3 2/2] i2c: Add i2c_device_get_match_data() callback
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v3 0/2] Extend device_get_match_data() to struct bus_type
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH -next v2] i2c: remove redundant dev_err_probe()
  • From: Zhu Wang <wangzhu9@xxxxxxxxxx>
• Re: [PATCH -next] i2c: remove redundant dev_err_probe()
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 4/9] i2c: hisi: Use dev_err_probe in probe function
  • From: Yicong Yang <yangyicong@xxxxxxxxxx>
• [PATCH] i2c: hisi: Only handle the interrupt of the driver's transfer
  • From: Yicong Yang <yangyicong@xxxxxxxxxx>
• [PATCH -next] i2c: remove redundant dev_err_probe()
  • From: Zhu Wang <wangzhu9@xxxxxxxxxx>
• [PATCH v8 6/8] i2c: i2c-smbus: fwnode_irq_get_byname() return value fix
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v8 0/8] fix fwnode_irq_get[_byname()] returnvalue
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• RE: [PATCH v2 2/2] i2c: Add i2c_device_get_match_data() callback
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH -next] i2c: mux: ltc4306: Remove an unnecessary ternary operator
  • From: Ruan Jinjie <ruanjinjie@xxxxxxxxxx>
• Re: [PATCH 8/9] i2c: imx-lpi2c: Use dev_err_probe in probe function
  • From: "Liao, Chang" <liaochang1@xxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add GPIO-based hotplug gate
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add GPIO-based hotplug gate
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH v1 1/9] i2c: designware: Move has_acpi_companion() to common code
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 4/9] i2c: designware: Propagate firmware node
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 5/9] i2c: designware: Always provide ID tables
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 2/2] dt-bindings: i2c: arb-gpio-challange: convert to DT schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: i2c: nxp,pca9541: convert to DT schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v14 2/4] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add GPIO-based hotplug gate
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH -next] i2c: stm32: fix the return value handle for platform_get_irq()
  • From: Ruan Jinjie <ruanjinjie@xxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add GPIO-based hotplug gate
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH 8/9] i2c: imx-lpi2c: Use dev_err_probe in probe function
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add GPIO-based hotplug gate
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: Avoid accessing freed buffers during i2c transfers.
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH 8/9] i2c: imx-lpi2c: Use dev_err_probe in probe function
  • From: "Liao, Chang" <liaochang1@xxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add GPIO-based hotplug gate
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add GPIO-based hotplug gate
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add GPIO-based hotplug gate
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add GPIO-based hotplug gate
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 0/2] GPIO-based hotplug i2c bus
  • From: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
• Re: [PATCH v3 0/2] GPIO-based hotplug i2c bus
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [linux@xxxxxxxxxxxx: Re: Functional enhancement of max31827]
  • From: Daniel Matyas <daniel.matyas23@xxxxxxxxx>
• [PATCH v3 2/2] i2c: Add GPIO-based hotplug gate
  • From: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: i2c: add binding for i2c-hotplug-gpio
  • From: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
• [PATCH v3 0/2] GPIO-based hotplug i2c bus
  • From: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
• Re: [PATCH v3 02/11] dt-bindings: treewide: add feature-domains description
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 00/50] Add support for sam9x7 SoC family
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 00/50] Add support for sam9x7 SoC family
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 00/50] Add support for sam9x7 SoC family
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 1/9] i2c: bcm2835: Use dev_err_probe in probe function
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v3 00/50] Add support for sam9x7 SoC family
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 00/50] Add support for sam9x7 SoC family
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v1 5/9] i2c: designware: Always provide ID tables
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 4/9] i2c: designware: Propagate firmware node
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 09/22] i2c: img-scb: Remove #ifdef guards for PM related functions
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 10/22] i2c: kempld: Convert to use regular device PM
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH v2 1/4] i2c: thunderx: Clock divisor logic changes
  • From: Piyush Malgujar <pmalgujar@xxxxxxxxxxx>
• [PATCH v2 4/4] i2c: thunderx: Adding ioclk support
  • From: Piyush Malgujar <pmalgujar@xxxxxxxxxxx>
• [PATCH v2 2/4] i2c: thunderx: Add support for High speed mode
  • From: Piyush Malgujar <pmalgujar@xxxxxxxxxxx>
• [PATCH v2 3/4] i2c: octeon: Handle watchdog timeout
  • From: Piyush Malgujar <pmalgujar@xxxxxxxxxxx>
• [PATCH v2 0/4] i2c: thunderx: Marvell thunderx i2c changes
  • From: Piyush Malgujar <pmalgujar@xxxxxxxxxxx>
• Re: [PATCH v3 13/50] dt-bindings: i2c: at91: Add sam9x7 compatible string
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 1/9] i2c: designware: Move has_acpi_companion() to common code
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 00/50] Add support for sam9x7 SoC family
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 00/50] Add support for sam9x7 SoC family
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v7 0/5] mfd: tps6586x: register restart handler
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v7 0/5] mfd: tps6586x: register restart handler
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v3 13/50] dt-bindings: i2c: at91: Add sam9x7 compatible string
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• [PATCH v3 00/50] Add support for sam9x7 SoC family
  • From: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] i2c: imx-lpi2c: add bus recovery feature
  • From: Carlos Song <carlos.song@xxxxxxx>
• Re: [PATCH -next] i2c: microchip-corei2c: clean up redundant dev_err_probe()
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• [PATCH -next] i2c: microchip-corei2c: clean up redundant dev_err_probe()
  • From: Chen Jiahao <chenjiahao16@xxxxxxxxxx>
• Re: [PATCH 8/9] i2c: imx-lpi2c: Use dev_err_probe in probe function
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 0/9] Use dev_err_probe in i2c probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH 2/9] i2c: mlxbf: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH 9/9] i2c: synquacer: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH 7/9] i2c: dln2: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH 8/9] i2c: imx-lpi2c: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH 4/9] i2c: hisi: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>
• [PATCH 5/9] i2c: qcom-cci: Use dev_err_probe in probe function
  • From: Liao Chang <liaochang1@xxxxxxxxxx>