The new IIC IP version on the UNISOC platform has added I2C_NACK_EN and I2C_TRANS_EN control bits. To ensure that the IIC controller can initiate transmission smoothly, these two bits need to be configured. Signed-off-by: Huangzheng Lai <Huangzheng.Lai@xxxxxxxxxx> --- drivers/i2c/busses/i2c-sprd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c index 7314c897525d..d867389c7f17 100644 --- a/drivers/i2c/busses/i2c-sprd.c +++ b/drivers/i2c/busses/i2c-sprd.c @@ -33,6 +33,8 @@ #define ADDR_RST 0x2c /* I2C_CTL */ +#define I2C_NACK_EN BIT(22) +#define I2C_TRANS_EN BIT(21) #define STP_EN BIT(20) #define FIFO_AF_LVL_MASK GENMASK(19, 16) #define FIFO_AF_LVL 16 @@ -397,7 +399,7 @@ static void sprd_i2c_enable(struct sprd_i2c *i2c_dev) sprd_i2c_clear_irq(i2c_dev); tmp = readl(i2c_dev->base + I2C_CTL); - writel(tmp | I2C_EN | I2C_INT_EN, i2c_dev->base + I2C_CTL); + writel(tmp | I2C_EN | I2C_INT_EN | I2C_NACK_EN | I2C_TRANS_EN, i2c_dev->base + I2C_CTL); } static irqreturn_t sprd_i2c_isr_thread(int irq, void *dev_id) -- 2.17.1
