Linux Kernel I2C

• Thread Index

• [PATCH v1 0/2] GPIO-based hotplug i2c bus
  • From: Svyatoslav Ryhel <clamor95@xxxxxxxxx>
• [PATCH v15 8/8] media: i2c: add DS90UB953 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v15 7/8] media: i2c: add DS90UB913 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v15 6/8] media: i2c: add DS90UB960 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v15 5/8] dt-bindings: media: add TI DS90UB960 FPD-Link III Deserializer
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v15 4/8] dt-bindings: media: add TI DS90UB953 FPD-Link III Serializer
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v15 3/8] dt-bindings: media: add TI DS90UB913 FPD-Link III Serializer
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v15 1/8] dt-bindings: i2c: Add I2C Address Translator (ATR)
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v15 0/8] i2c-atr and FPDLink
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v15 2/8] i2c: add I2C Address Translator (ATR) support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v14 17/18] media: i2c: ds90ub953: Restructure clkout management
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v14 17/18] media: i2c: ds90ub953: Restructure clkout management
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v14 18/18] media: i2c: ds90ub953: Support non-sync mode
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v14 18/18] media: i2c: ds90ub953: Support non-sync mode
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v14 17/18] media: i2c: ds90ub953: Restructure clkout management
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v14 15/18] media: i2c: ds90ub953: Handle V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v14 17/18] media: i2c: ds90ub953: Restructure clkout management
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v14 16/18] media: i2c: ds90ub960: Allow FPD-Link async mode
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v14 18/18] media: i2c: ds90ub953: Support non-sync mode
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v14 13/18] media: i2c: ds90ub953: Use v4l2_fwnode_endpoint_parse()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v14 11/18] media: i2c: ds90ub9xx: Select GPIOLIB rather than OF_GPIO
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [GIT PULL] at24: updates for v6.5
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v1 1/1] i2c: scmi: Convert to be a platform driver
  • From: Michael Brunner <michael.brunner@xxxxxxxxxxx>
• Re: [PATCH 0/2] i2c: i801: Force no IRQ for Dell Latitude E7450
  • From: Marius Hoch <mail@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: i801: Force no IRQ for Dell Latitude E7450
  • From: Marius Hoch <mail@xxxxxxxxxxxxx>
• Re: [PATCH 0/2] i2c: i801: Force no IRQ for Dell Latitude E7450
  • From: Marius Hoch <mail@xxxxxxxxxxxxx>
• Re: [PATCH v14 18/18] media: i2c: ds90ub953: Support non-sync mode
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v14 17/18] media: i2c: ds90ub953: Restructure clkout management
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v14 16/18] media: i2c: ds90ub960: Allow FPD-Link async mode
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v14 15/18] media: i2c: ds90ub953: Handle V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v14 13/18] media: i2c: ds90ub953: Use v4l2_fwnode_endpoint_parse()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v14 11/18] media: i2c: ds90ub9xx: Select GPIOLIB rather than OF_GPIO
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v14 13/18] media: i2c: ds90ub953: Use v4l2_fwnode_endpoint_parse()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v14 18/18] media: i2c: ds90ub953: Support non-sync mode
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v14 14/18] media: i2c: ds90ub913: Use v4l2_fwnode_endpoint_parse()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v14 07/18] media: i2c: add DS90UB913 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v14 05/18] dt-bindings: media: add TI DS90UB960 FPD-Link III Deserializer
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v14 16/18] media: i2c: ds90ub960: Allow FPD-Link async mode
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v14 12/18] media: i2c: ds90ub960: Configure CSI-2 continuous clock
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v14 10/18] media: i2c: ds90ub9xx: Add COMMON_CLK kconfig dependency
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v14 02/18] i2c: add I2C Address Translator (ATR) support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v14 11/18] media: i2c: ds90ub9xx: Select GPIOLIB rather than OF_GPIO
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v14 15/18] media: i2c: ds90ub953: Handle V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v14 04/18] dt-bindings: media: add TI DS90UB953 FPD-Link III Serializer
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v14 17/18] media: i2c: ds90ub953: Restructure clkout management
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v14 03/18] dt-bindings: media: add TI DS90UB913 FPD-Link III Serializer
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v14 09/18] media: i2c: ds90ub960: Fix use of UB960_SR_FWD_CTL1
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v14 06/18] media: i2c: add DS90UB960 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v14 08/18] media: i2c: add DS90UB953 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v14 01/18] dt-bindings: i2c: Add I2C Address Translator (ATR)
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v14 00/18] i2c-atr and FPDLink
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 0/9] fix fwnode_irq_get[_byname()] returnvalue
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH AUTOSEL 6.1 17/26] i2c: mchp-pci1xxxx: Avoid cast to incompatible function type
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.3 20/30] i2c: designware: fix idx_write_cnt in read loop
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.3 19/30] i2c: mchp-pci1xxxx: Avoid cast to incompatible function type
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/4] i2c: i801: Use i2c_mark_adapter_suspended/resumed
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v7 0/9] fix fwnode_irq_get[_byname()] returnvalue
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH 2/4] i2c: i801: Replace acpi_lock with I2C bus lock
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 3/4] i2c: i801: Improve i801_block_transaction_byte_by_byte
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 1/4] i2c: i801: Use i2c_mark_adapter_suspended/resumed
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 2/4] i2c: i801: Replace acpi_lock with I2C bus lock
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 1/4] i2c: i801: Use i2c_mark_adapter_suspended/resumed
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: scmi: Convert to be a platform driver
  • From: "andriy.shevchenko@xxxxxxxxxxxxxxx" <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 1/5] kernel/reboot: emergency_restart: set correct system_state
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v6 1/5] kernel/reboot: emergency_restart: set correct system_state
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH v7 0/9] fix fwnode_irq_get[_byname()] returnvalue
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: sprd: Delete i2c adapter in .remove's error path
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH i2c-tools v2] i2cdetect: add messages for errors during bus listing
  • From: Paul Wise <pabs3@xxxxxxxxxxxxx>
• Re: [PATCH v6 1/5] kernel/reboot: emergency_restart: set correct system_state
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v6 2/5] i2c: core: run atomic i2c xfer when !preemptible
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 4/4] i2c: i801: Switch to new macro DEFINE_SIMPLE_DEV_PM_OPS
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 2/4] i2c: i801: Replace acpi_lock with I2C bus lock
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 3/4] i2c: i801: Improve i801_block_transaction_byte_by_byte
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 1/4] i2c: i801: Use i2c_mark_adapter_suspended/resumed
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH i2c-tools v2] i2cdetect: add messages for errors during bus listing
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH i2c-tools] Update links for https and changed URLs
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1] drivers/i2c/muxes:Fix resource leaks in device_for_each_child_node() loops
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1] drivers/i2c/muxes:Fix resource leaks in device_for_each_child_node() loops
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v1] drivers/i2c/muxes:Fix resource leaks in device_for_each_child_node() loops
  • From: Wang Ming <machel@xxxxxxxx>
• RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v6] i2c: add support for Zhaoxin I2C controller
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] i2c: busses: nomadik cleanups
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] usb: typec: ucsi: Mark dGPUs as DEVICE scope
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: qup: Add missing unwind goto in qup_i2c_probe()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: wmt: Use devm_platform_get_and_ioremap_resource()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: versatile: Use devm_platform_get_and_ioremap_resource()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c-hix5hd2: Add I2C_M_STOP flag support for i2c-hix5hd2 driver.
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: mpc: Use of_property_read_reg() to parse "reg"
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: opencores: Add missing type for "regstep"
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5] i2c: add support for Zhaoxin I2C controller
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v5] i2c: add support for Zhaoxin I2C controller
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: opencores: Add missing type for "regstep"
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2] usb: typec: ucsi: Mark dGPUs as DEVICE scope
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: imx-lpi2c: directly return ISR when detect a NACK
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v4] i2c: ocores: use devm_ managed clks
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: imx-lpi2c: add debug message when i2c peripheral clk doesn't work
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: imx-lpi2c: add bus recovery feature
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [EXT] Re: [PATCH 2/2] dt-bindings: i2c: imx-lpi2c: Add bus recovery example
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: opencores: Add missing type for "regstep"
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: opencores: Add missing type for "regstep"
  • From: Peter Korsgaard <peter@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: opencores: Add missing type for "regstep"
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH] dt-bindings: i2c: opencores: Add missing type for "regstep"
  • From: Rob Herring <robh@xxxxxxxxxx>
• RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] w1: ds2482: Switch back to use struct i2c_driver's .probe()
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] w1: ds2482: Switch back to use struct i2c_driver's .probe()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: mpc: Use of_property_read_reg() to parse "reg"
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: mpc: Use of_property_read_reg() to parse "reg"
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: mpc: Use of_property_read_reg() to parse "reg"
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 13/15] i2c: busses: sun6i-p2wi: Use devm_clk_get_enabled()
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 10/15] i2c: busses: pasemi-platform: Use devm_clk_get_enabled()
  • From: alyssa@xxxxxxxxxxxxx
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH 08/15] i2c: busses: mt7621: Use devm_clk_get_enabled()
  • From: Stefan Roese <sr@xxxxxxx>
• Re: [PATCH v4] i2c: add support for Zhaoxin I2C controller
  • From: Hans Hu <HansHu-oc@xxxxxxxxxxx>
• Re: [PATCH 02/15] i2c: busses: xiic: Use devm_clk_get_enabled()
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH 01/15] i2c: busses: emev2: Use devm_clk_get_enabled()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 01/15] i2c: busses: emev2: Use devm_clk_get_enabled()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: add support for Zhaoxin I2C controller
  • From: Hans Hu <HansHu-oc@xxxxxxxxxxx>
• Re: [PATCH 08/15] i2c: busses: mt7621: Use devm_clk_get_enabled()
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH 01/15] i2c: busses: emev2: Use devm_clk_get_enabled()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH 11/15] i2c: busses: stm32f4: Use devm_clk_get_enabled()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH 03/15] i2c: busses: at91-core: Use devm_clk_get_enabled()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH 15/15] i2c: busses: uniphier: Use devm_clk_get_enabled()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH 08/15] i2c: busses: mt7621: Use devm_clk_get_enabled()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH 00/15] i2c: busses: Use devm_clk_get_enabled()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH 02/15] i2c: busses: xiic: Use devm_clk_get_enabled()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH 07/15] i2c: busses: lpc2k: Use devm_clk_get_enabled()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH 06/15] i2c: busses: jz4780: Use devm_clk_get_enabled()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH 05/15] i2c: busses: hix5hd2: Use devm_clk_get_enabled()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH 10/15] i2c: busses: pasemi-platform: Use devm_clk_get_enabled()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH 04/15] i2c: busses: exynos5: Use devm_clk_get_enabled()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH 14/15] i2c: busses: uniphier-f: Use devm_clk_get_enabled()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH 12/15] i2c: busses: stm32f7: Use devm_clk_get_enabled()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH 13/15] i2c: busses: sun6i-p2wi: Use devm_clk_get_enabled()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH 09/15] i2c: busses: owl: Use devm_clk_get_enabled()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 0/3] i2c: busses: nomadik cleanups
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 0/3] i2c: busses: nomadik cleanups
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH 1/3] i2c: busses: i2c-nomadik: Remove unnecessary goto label
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH 3/3] i2c: busses: nomadik: Use dev_err_probe() whenever possible
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH 2/3] i2c: busses: nomadik: Use devm_clk_get_enabled()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PULL REQUEST] i2c-for-6.4-rc6
  • From: pr-tracker-bot@xxxxxxxxxx
• [PULL REQUEST] i2c-for-6.4-rc6
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: versatile: Use devm_platform_get_and_ioremap_resource()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] i2c-hix5hd2: Add more debug info when transfer fail.
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c-hix5hd2: Add I2C_M_STOP flag support for i2c-hix5hd2 driver.
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: versatile: Use devm_platform_get_and_ioremap_resource()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: wmt: Use devm_platform_get_and_ioremap_resource()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 3/3] i2c: octeon: Handle watchdog timeout
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 2/3] i2c: thunderx: Add support for High speed mode
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 1/3] i2c: thunderx: Clock divisor logic changes
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: qup: Add missing unwind goto in qup_i2c_probe()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: mpc: Use of_property_read_reg() to parse "reg"
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: xiic: Don't try to handle more interrupt events after error
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH] i2c: mpc: Use of_property_read_reg() to parse "reg"
  • From: Rob Herring <robh@xxxxxxxxxx>
• i2c-aspeed needs review
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• RE: [PATCH v4] i2c: Add i2c_get_match_data()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: xiic: Don't try to handle more interrupt events after error
  • From: "wsa@xxxxxxxxxx" <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: imx-lpi2c: Don't open-code DIV_ROUND_UP
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4] i2c: Add i2c_get_match_data()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [GIT PULL] at24: fixes for v6.4-rc6
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: add support for Zhaoxin I2C controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v4] i2c: add support for Zhaoxin I2C controller
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v4] i2c: add support for Zhaoxin I2C controller
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v4] i2c: add support for Zhaoxin I2C controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [GIT PULL] at24: fixes for v6.4-rc6
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v4] i2c: add support for Zhaoxin I2C controller
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v4] i2c: add support for Zhaoxin I2C controller
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH v2] i2c: hix5hd2: Make sure clk is disabled in remove
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2] i2c: hix5hd2: Make sure clk is disabled in remove
  • From: Alexey Khoroshilov <khoroshilov@xxxxxxxxx>
• Re: [PATCH v2] i2c: hix5hd2: Make sure clk is disabled in remove
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH -next] i2c: amd-mp2: drop free_irq() of devm_request_irq() allocated irq
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/1] i2c: busses: i2c-img-scb: remove unnecessary (void*) conversions
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [linux-i2c] Patch notification: DaVinci: 2 patches updated
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] i2c: qcom-cci:Use devm_platform_get_and_ioremap_resource()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: Add entries for Renesas RZ/V2M I2C driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: tegra: Fix failure during probe deferral cleanup
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [linux-i2c] Patch notification: DaVinci: 2 patches updated
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [v2 2/2] i2c: davinci: Use struct name not type with devm_kzalloc()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [linux-i2c] Patch notification: DaVinci: 2 patches updated
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: davinci: Use struct name not type with devm_kzalloc()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: add support for Zhaoxin I2C controller
  • From: Hans Hu <HansHu-oc@xxxxxxxxxxx>
• Re: [PATCH] i2c: tegra: Fix failure during probe deferral cleanup
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] eeprom: at24: also select REGMAP
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH] i2c: tegra: Fix failure during probe deferral cleanup
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [linux-i2c] Patch notification: DaVinci: 2 patches updated
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [linux-i2c] Patch notification: i2c-tiny-usb: patches updated
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: add support for Zhaoxin I2C controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3] i2c: add support for Zhaoxin I2C controller
  • From: Hans Hu <HansHu-oc@xxxxxxxxxxx>
• [PATCH] eeprom: at24: also select REGMAP
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v2] MAINTAINERS: Add entries for Renesas RZ/V2M I2C driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v4] i2c: Add i2c_get_match_data()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v3] i2c: Add i2c_get_match_data()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: add support for Zhaoxin I2C controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3] i2c: add support for Zhaoxin I2C controller
  • From: Hans Hu <HansHu-oc@xxxxxxxxxxx>
• Re: [PATCH 3/5] i2c: qcom-cci:Use devm_platform_get_and_ioremap_resource()
  • From: Robert Foss <rfoss@xxxxxxxxxx>
• RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] i2c: qcom-cci:Use devm_platform_get_and_ioremap_resource()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: sprd: Delete i2c adapter in .remove's error path
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: Add i2c_get_match_data()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: Add i2c_get_match_data()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• RE: [PATCH] MAINTAINERS: Add entries for Renesas RZ/V2M I2C driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v3] i2c: Add i2c_get_match_data()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: davinci: Use platform table macro over module_alias
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: davinci: Use struct name not type with devm_kzalloc()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: Add i2c_get_match_data()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: imx-lpi2c: directly return ISR when detect a NACK
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• RE: [PATCH] MAINTAINERS: Add entries for Renesas RZ/V2M I2C driver
  • From: Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Add entries for Renesas RZ/V2M I2C driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• RE: [PATCH v3] i2c: Add i2c_get_match_data()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: Add i2c_get_match_data()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• RE: [PATCH v3] i2c: Add i2c_get_match_data()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: xiic: Don't try to handle more interrupt events after error
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: xiic: Don't try to handle more interrupt events after error
  • From: Robert Hancock <robert.hancock@xxxxxxxxxx>
• Re: [PATCH] i2c: xiic: Don't try to handle more interrupt events after error
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH] i2c: xiic: Don't try to handle more interrupt events after error
  • From: Robert Hancock <robert.hancock@xxxxxxxxxx>
• Re: [PATCH] i2c: sprd: Delete i2c adapter in .remove's error path
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH] MAINTAINERS: Add entries for Renesas RZ/V2M I2C driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v3] i2c: Add i2c_get_match_data()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: add support for Zhaoxin I2C controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3] i2c: add support for Zhaoxin I2C controller
  • From: Hans Hu <HansHu-oc@xxxxxxxxxxx>
• Re: [PATCH net-next v11 2/9] i2c: designware: Add driver support for Wangxun 10Gb NIC
  • From: "'Wolfram Sang'" <wsa@xxxxxxxxxx>
• RE: [PATCH net-next v11 2/9] i2c: designware: Add driver support for Wangxun 10Gb NIC
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• Re: [PATCH net-next v11 2/9] i2c: designware: Add driver support for Wangxun 10Gb NIC
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH] i2c: Devices which have some i2c addr can work in same i2c bus
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v4 11/41] i2c: add HAS_IOPORT dependencies
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: add support for Zhaoxin I2C controller
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH net-next v11 2/9] i2c: designware: Add driver support for Wangxun 10Gb NIC
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next v11 2/9] i2c: designware: Add driver support for Wangxun 10Gb NIC
  • From: "'Wolfram Sang'" <wsa@xxxxxxxxxx>
• Re: [PATCH v4 11/41] i2c: add HAS_IOPORT dependencies
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: designware: fix idx_write_cnt in read loop
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 11/41] i2c: add HAS_IOPORT dependencies
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v4 11/41] i2c: add HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: xilinx: Switch xilinx.com emails to amd.com
  • From: Michal Simek <monstr@xxxxxxxxx>
• Re: [PATCH v3] i2c: designware: fix idx_write_cnt in read loop
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• RE: [PATCH v2] i2c: Add i2c_get_match_data()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: mv64xxx: Fix reading invalid status value in atomic mode
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH net-next v11 2/9] i2c: designware: Add driver support for Wangxun 10Gb NIC
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 11/41] i2c: add HAS_IOPORT dependencies
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: xilinx: Switch xilinx.com emails to amd.com
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH net-next v11 2/9] i2c: designware: Add driver support for Wangxun 10Gb NIC
  • From: "'Wolfram Sang'" <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: designware: fix idx_write_cnt in read loop
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: Add i2c_get_match_data()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• RE: [PATCH v2] i2c: Add i2c_get_match_data()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH RESEND v2 3/3] i2c: rzv2m: Disable the operation of unit in case of error
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: Add i2c_get_match_data()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• RE: [PATCH v6 RESEND 2/2] i2c: tegra: Share same DMA channel for RX and TX
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH RESEND v2 3/3] i2c: rzv2m: Disable the operation of unit in case of error
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH RESEND v2 2/3] i2c: rzv2m: Replace lowercase macros with static inline functions
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH RESEND v2 1/3] i2c: rzv2m: Drop extra space
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: mchp-pci1xxxx: Avoid cast to incompatible function type
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: Fix spelling mistake "innacurate" -> "inaccurate"
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 2/2] i2c: tegra: allow VI support to be compiled out
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 1/2] i2c: tegra: allow DVC support to be compiled out
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v6 RESEND 2/2] i2c: tegra: Share same DMA channel for RX and TX
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• RE: [PATCH net-next v11 2/9] i2c: designware: Add driver support for Wangxun 10Gb NIC
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• Re: [PATCH net-next v11 2/9] i2c: designware: Add driver support for Wangxun 10Gb NIC
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: Add myself as I2C host drivers maintainer
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 00/89] i2c: Convert to platform remove callback returning void
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH net-next v11 2/9] i2c: designware: Add driver support for Wangxun 10Gb NIC
  • From: "'Wolfram Sang'" <wsa@xxxxxxxxxx>
• Re: [PATCH v1] i2c: designware: Handle invalid SMBus block data response length
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• RE: [PATCH net-next v11 2/9] i2c: designware: Add driver support for Wangxun 10Gb NIC
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• Re: [PATCH net-next v11 2/9] i2c: designware: Add driver support for Wangxun 10Gb NIC
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH net-next v11 7/9] net: pcs: Add 10GBASE-R mode for Synopsys Designware XPCS
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v11 9/9] net: txgbe: Support phylink MAC layer
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v11 8/9] net: txgbe: Implement phylink pcs
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v11 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v11 0/9] TXGBE PHYLINK support
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v11 4/9] net: txgbe: Register I2C platform device
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v11 5/9] net: txgbe: Add SFP module identify
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v11 3/9] net: txgbe: Register fixed rate clock
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v11 2/9] i2c: designware: Add driver support for Wangxun 10Gb NIC
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v11 1/9] net: txgbe: Add software nodes to support phylink
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] i2c: i801: Force no IRQ for Dell Latitude E7450
  • From: Rudolf Marek <r.marek@xxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: i801: Force no IRQ for Dell Latitude E7450
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 0/2] i2c: i801: Force no IRQ for Dell Latitude E7450
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 0/2] i2c: i801: Force no IRQ for Dell Latitude E7450
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 0/2] i2c: i801: Force no IRQ for Dell Latitude E7450
  • From: Marius Hoch <mail@xxxxxxxxxxxxx>
• [PATCH v6 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [EXT] Re: [PATCH 2/2] dt-bindings: i2c: imx-lpi2c: Add bus recovery example
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: i2c: i2c-mt65xx: add additional clocks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2] i2c: Add i2c_get_match_data()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: Add myself as I2C host drivers maintainer
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3] i2c: add support for Zhaoxin I2C controller
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• Re: [PATCH v1] i2c: designware: Handle invalid SMBus block data response length
  • From: Tam Chi Nguyen <tamnguyenchi@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] MAINTAINERS: Add myself as I2C host drivers maintainer
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH] MAINTAINERS: Add myself as I2C host drivers maintainer
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: i2c: i2c-mt65xx: add additional clocks
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: i2c: i2c-mt65xx: add additional clocks
  • From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
• [PATCH v2] i2c: Add i2c_get_match_data()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH net-next v10 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next v10 4/9] net: txgbe: Register I2C platform device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next v10 2/9] i2c: designware: Add driver support for Wangxun 10Gb NIC
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: i2c: i2c-mt65xx: add additional clocks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH] i2c: Add i2c_get_match_data()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: imx-lpi2c: Don't open-code DIV_ROUND_UP
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 00/89] i2c: Convert to platform remove callback returning void
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: imx-lpi2c: fix type char overflow issue when calculating the clock cycle
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] i2c: imx-lpi2c: Don't open-code DIV_ROUND_UP
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: add support for Zhaoxin I2C controller
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: mt65xx: add additional clocks
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [RFC PATCH v3 6/7] i2c: aspeed: Set the fwnode for the adap->dev
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH v3 5/7] i2c: aspeed: switch to generic fw properties.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH v3 4/7] i2c: aspeed: use a function pointer type def for clk_reg_val callback
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• RE: [PATCH 00/89] i2c: Convert to platform remove callback returning void
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH 00/89] i2c: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: add support for Zhaoxin I2C controller
  • From: HansHu-oc <HansHu-oc@xxxxxxxxxxx>
• [PATCH] i2c: Devices which have some i2c addr can work in same i2c bus
  • From: David Wu <david.wu@xxxxxxxxxxxxxx>
• [PATCH net-next v10 4/9] net: txgbe: Register I2C platform device
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v10 1/9] net: txgbe: Add software nodes to support phylink
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v10 9/9] net: txgbe: Support phylink MAC layer
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v10 0/9] TXGBE PHYLINK support
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v10 2/9] i2c: designware: Add driver support for Wangxun 10Gb NIC
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v10 5/9] net: txgbe: Add SFP module identify
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v10 8/9] net: txgbe: Implement phylink pcs
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v10 3/9] net: txgbe: Register fixed rate clock
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v10 7/9] net: pcs: Add 10GBASE-R mode for Synopsys Designware XPCS
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v10 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• Re: [EXT] Re: [PATCH 2/2] dt-bindings: i2c: imx-lpi2c: Add bus recovery example
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC PATCH v3 6/7] i2c: aspeed: Set the fwnode for the adap->dev
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC PATCH v3 5/7] i2c: aspeed: switch to generic fw properties.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC PATCH v3 4/7] i2c: aspeed: use a function pointer type def for clk_reg_val callback
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC PATCH v3 2/7] i2c: aspeed: Use platform_get_irq() instead of opencoding
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: i2c: i2c-mt65xx: add additional clocks
  • From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
• [PATCH 2/2] i2c: mt65xx: add additional clocks
  • From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
• RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: add support for Zhaoxin I2C controller
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [RFC PATCH v2 4/6] i2c: aspeed: switch to generic fw properties.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• RE: [EXT] Re: [PATCH 2/2] dt-bindings: i2c: imx-lpi2c: Add bus recovery example
  • From: Carlos Song <carlos.song@xxxxxxx>
• RE: [PATCH net-next v9 5/9] net: txgbe: Add SFP module identify
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [RFC PATCH v3 7/7] HACK: i2c: aspeed: Comment clock out and make reset optional
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [RFC PATCH v3 6/7] i2c: aspeed: Set the fwnode for the adap->dev
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [RFC PATCH v3 5/7] i2c: aspeed: switch to generic fw properties.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [RFC PATCH v3 4/7] i2c: aspeed: use a function pointer type def for clk_reg_val callback
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [RFC PATCH v3 3/7] i2c: aspeed: Don't report error when optional dt bus-frequency not supplied
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [RFC PATCH v3 2/7] i2c: aspeed: Use platform_get_irq() instead of opencoding
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [RFC PATCH v3 1/7] i2c: acpi: set slave mode flag
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [RFC PATCH v3 0/7] i2c: Enabling use of aspeed-i2c with ACPI
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH net-next v9 5/9] net: txgbe: Add SFP module identify
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 2/6] i2c: aspeed: Use platform_get_irq() instead of opencoding
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 6/6] HACK: i2c: aspeed: Comment clock out and make reset optional
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• RE: [PATCH net-next v9 5/9] net: txgbe: Add SFP module identify
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: lpi2c: cache peripheral clock rate
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 0/9] fix fwnode_irq_get[_byname()] returnvalue
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [RFC PATCH v2 6/6] HACK: i2c: aspeed: Comment clock out and make reset optional
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC PATCH v2 5/6] i2c: aspeed: Set the fwnode for the adap->dev
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC PATCH v2 4/6] i2c: aspeed: switch to generic fw properties.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC PATCH v2 3/6] i2c: aspeed: Don't report error when optional dt bus-frequency not supplied
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC PATCH v2 2/6] i2c: aspeed: Use platform_get_irq() instead of opencoding
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] i2c: imx-lpi2c: fix type char overflow issue when calculating the clock cycle
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [RFC PATCH v2 6/6] HACK: i2c: aspeed: Comment clock out and make reset optional
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [RFC PATCH v2 5/6] i2c: aspeed: Set the fwnode for the adap->dev
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: i2c: imx-lpi2c: Add bus recovery example
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [RFC PATCH v2 4/6] i2c: aspeed: switch to generic fw properties.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [RFC PATCH v2 3/6] i2c: aspeed: Don't report error when optional dt bus-frequency not supplied
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [RFC PATCH v2 2/6] i2c: aspeed: Use platform_get_irq() instead of opencoding
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [RFC PATCH v2 1/6] i2c: acpi: set slave mode flag
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [RFC PATCH v2 0/6] i2c: Enabling use of aspeed-i2c with ACPI
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH 6/6] HACK: i2c: aspeed: Enable build without COMPILE_TEST
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH 5/6] HACK: i2c: aspeed: Comment the clock and reset out.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH 3/6] i2c: aspeed: switch to generic fw properties.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] i2c: sprd: Delete i2c adapter in .remove's error path
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH net-next v9 1/9] net: txgbe: Add software nodes to support phylink
  • From: andy.shevchenko@xxxxxxxxx
• RE: [PATCH net-next v9 5/9] net: txgbe: Add SFP module identify
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• RE: [PATCH net-next v9 1/9] net: txgbe: Add software nodes to support phylink
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH] i2c: imx-lpi2c: fix type char overflow issue when calculating the clock cycle
  • From: carlos.song@xxxxxxx
• [PATCH 2/2] dt-bindings: i2c: imx-lpi2c: Add bus recovery example
  • From: carlos.song@xxxxxxx
• [PATCH 1/2] i2c: imx-lpi2c: add bus recovery feature
  • From: carlos.song@xxxxxxx
• [PATCH v2] i2c: add support for Zhaoxin I2C controller
  • From: Hans Hu <hanshu-oc@xxxxxxxxxxx>
• [PATCH] i2c: imx-lpi2c: add debug message when i2c peripheral clk doesn't work
  • From: carlos.song@xxxxxxx
• [PATCH v7 9/9] net-next: mvpp2: don't shadow error
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v7 8/9] net-next: mvpp2: relax return value check for IRQ get
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v7 5/9] pinctrl: ingenic: relax return value check for IRQ get
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v7 7/9] i2c: i2c-smbus: fwnode_irq_get_byname() return value fix
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v7 6/9] pinctrl: pistachio: relax return value check for IRQ get
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v7 4/9] pinctrl: wpcm450: relax return value check for IRQ get
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v7 3/9] iio: cdc: ad7150: relax return value check for IRQ get
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v7 2/9] iio: mb1232: relax return value check for IRQ get
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v7 1/9] drivers: fwnode: fix fwnode_irq_get[_byname]()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v7 0/9] fix fwnode_irq_get[_byname()] returnvalue
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• RE: [PATCH net-next v9 5/9] net: txgbe: Add SFP module identify
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• RE: [PATCH net-next v9 8/9] net: txgbe: Implement phylink pcs
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• Re: [PATCH v5 3/8] net-next: mvpp2: relax return value check for IRQ get
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/8] drivers: fwnode: fix fwnode_irq_get[_byname]()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/8] net-next: mvpp2: relax return value check for IRQ get
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 4/8] pinctrl: wpcm450: relax return value check for IRQ get
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 5/8] pinctrl: ingenic: relax return value check for IRQ get
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 6/8] pinctrl: pistachio: relax return value check for IRQ get
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 8/8] i2c: i2c-smbus: fwnode_irq_get_byname() return value fix
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 7/8] iio: cdc: ad7150: relax return value check for IRQ get
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• RE: [PATCH 0/3] RZ/V2M I2Cdriver clean ups
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH net-next v9 1/9] net: txgbe: Add software nodes to support phylink
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next v9 4/9] net: txgbe: Register I2C platform device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next v9 2/9] i2c: designware: Add driver support for Wangxun 10Gb NIC
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] RZ/V2M I2Cdriver clean ups
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH 5/6] HACK: i2c: aspeed: Comment the clock and reset out.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC PATCH 4/6] i2c: aspeed: Set the fwnode for the adap->dev
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC PATCH 3/6] i2c: aspeed: switch to generic fw properties.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC PATCH 2/6] i2c: aspeed: Use platform_get_irq() instead of opencoding
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC PATCH 1/6] i2c: acpi: set slave mode flag
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3] i2c: designware: fix idx_write_cnt in read loop
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH RESEND v2 3/3] i2c: rzv2m: Disable the operation of unit in case of error
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH RESEND v2 0/3] RZ/V2M I2Cdriver clean ups
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH RESEND v2 2/3] i2c: rzv2m: Replace lowercase macros with static inline functions
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH RESEND v2 1/3] i2c: rzv2m: Drop extra space
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v2 2/3] i2c: rzv2m: Replace lowercase macros with static inline functions
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] i2c: rzv2m: Disable the operation of unit in case of error
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] i2c: rzv2m: Replace lowercase macros with static inline functions
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] i2c: rzv2m: Drop extra space
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v2 0/3] RZ/V2M I2Cdriver clean ups
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH net-next v9 5/9] net: txgbe: Add SFP module identify
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next v9 5/9] net: txgbe: Add SFP module identify
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH net-next v9 8/9] net: txgbe: Implement phylink pcs
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next v9 8/9] net: txgbe: Implement phylink pcs
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next v9 4/9] net: txgbe: Register I2C platform device
  • From: kernel test robot <lkp@xxxxxxxxx>
• RE: [PATCH net-next v9 8/9] net: txgbe: Implement phylink pcs
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• Re: [PATCH net-next v9 8/9] net: txgbe: Implement phylink pcs
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• RE: [PATCH net-next v9 8/9] net: txgbe: Implement phylink pcs
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• Re: [PATCH net-next v9 8/9] net: txgbe: Implement phylink pcs
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• RE: [PATCH 3/3] i2c: rzv2m: Disable the operation of unit in case of error
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v4] i2c: ocores: use devm_ managed clks
  • From: Wang Zhang <silver_code@xxxxxxxxxxx>
• [PATCH v6 8/8] i2c: i2c-smbus: fwnode_irq_get_byname() return value fix
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v6 7/8] iio: cdc: ad7150: relax return value check for IRQ get
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v6 6/8] pinctrl: pistachio: relax return value check for IRQ get
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v6 5/8] pinctrl: ingenic: relax return value check for IRQ get
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v6 3/8] net-next: mvpp2: relax return value check for IRQ get
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v6 4/8] pinctrl: wpcm450: relax return value check for IRQ get
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v6 2/8] iio: mb1232: relax return value check for IRQ get
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v6 1/8] drivers: fwnode: fix fwnode_irq_get[_byname]()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v6 0/8] fix fwnode_irq_get[_byname()] returnvalue
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• RE: [PATCH net-next v9 8/9] net: txgbe: Implement phylink pcs
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• Re: [PATCH net-next v9 8/9] net: txgbe: Implement phylink pcs
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• [PATCH i2c-tools v2] i2cdetect: add messages for errors during bus listing
  • From: Paul Wise <pabs3@xxxxxxxxxxxxx>
• [PATCH i2c-tools] Update links for https and changed URLs
  • From: Paul Wise <pabs3@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: ocores: use devm_ managed clks
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/6] i2c: Enabling use of aspeed-i2c with ACPI
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 3/3] i2c: rzv2m: Disable the operation of unit in case of error
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH 2/3] i2c: rzv2m: Rename macro names in all uppercase
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: rzv2m: Rename macro names in all uppercase
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] i2c: rzv2m: Drop extra space
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [RFC PATCH 6/6] HACK: i2c: aspeed: Enable build without COMPILE_TEST
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [RFC PATCH 5/6] HACK: i2c: aspeed: Comment the clock and reset out.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [RFC PATCH 4/6] i2c: aspeed: Set the fwnode for the adap->dev
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [RFC PATCH 3/6] i2c: aspeed: switch to generic fw properties.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [RFC PATCH 2/6] i2c: aspeed: Use platform_get_irq() instead of opencoding
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [RFC PATCH 1/6] i2c: acpi: set slave mode flag
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [RFC PATCH 0/6] i2c: Enabling use of aspeed-i2c with ACPI
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH 0/3] RZ/V2M I2Cdriver clean ups
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 1/3] i2c: rzv2m: Drop extra space
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 2/3] i2c: rzv2m: Rename macro names in all uppercase
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 3/3] i2c: rzv2m: Disable the operation of unit in case of error
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v1] i2c: designware: Handle invalid SMBus block data response length
  • From: Tam Chi Nguyen <tamnguyenchi@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: ocores: use devm_ managed clks
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v3] i2c: ocores: use devm_ managed clks
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v3] i2c: ocores: use devm_ managed clks
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: Re: [PATCH v3] i2c: ocores: use devm_ managed clks
  • From: 张网 <m202171703@xxxxxxxxxxx>
• Re: [PATCH v3] i2c: ocores: use devm_ managed clks
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v3] i2c: ocores: use devm_ managed clks
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v3] i2c: designware: fix idx_write_cnt in read loop
  • From: David Zheng <david.zheng@xxxxxxxxx>
• Re: [PATCH] i2c: mv64xxx: Fix reading invalid status value in atomic mode
  • From: Chris Morgan <macromorgan@xxxxxxxxxxx>
• [PATCH v3] i2c: ocores: use devm_ managed clks
  • From: Wang Zhang <silver_code@xxxxxxxxxxx>
• [PATCH v3] i2c: ocores: use devm_ managed clks
  • From: Wang Zhang <silver_code@xxxxxxxxxxx>
• Re: [PATCH v1] i2c: designware: fix idx_write_cnt in read loop
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next v9 6/9] net: txgbe: Support GPIO to SFP socket
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next v9 8/9] net: txgbe: Implement phylink pcs
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH net-next v9 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v1] i2c: designware: Handle invalid SMBus block data response length
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next v9 3/9] net: txgbe: Register fixed rate clock
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v1] i2c: designware: fix idx_write_cnt in read loop
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] misc: Switch i2c drivers back to use .probe()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH net-next v9 8/9] net: txgbe: Implement phylink pcs
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v9 5/9] net: txgbe: Add SFP module identify
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v9 2/9] i2c: designware: Add driver support for Wangxun 10Gb NIC
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v9 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v9 3/9] net: txgbe: Register fixed rate clock
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v9 7/9] net: pcs: Add 10GBASE-R mode for Synopsys Designware XPCS
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v9 1/9] net: txgbe: Add software nodes to support phylink
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v9 0/9] TXGBE PHYLINK support
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v9 9/9] net: txgbe: Support phylink MAC layer
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH net-next v9 4/9] net: txgbe: Register I2C platform device
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• Re: [PATCH] misc: Switch i2c drivers back to use .probe()
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH] i2c: imx-lpi2c: directly return ISR when detect a NACK
  • From: carlos.song@xxxxxxx
• Re: [PATCH 0/2] i2c: i801: Force no IRQ for Dell Latitude E7450
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v3 3/3] i2c: i801: Add support for Intel Meteor Lake PCH-S
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v3 2/3] i2c: i801: Add support for Intel Meteor Lake SoC-S
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v1] i2c: designware: fix idx_write_cnt in read loop
  • From: David Zheng <david.zheng@xxxxxxxxx>
• Re: [PATCH v3 1/3] i2c: i801: Enlarge device name field in i801_ids table
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v3] i2c: ocores: use devm_ managed clks
  • From: Wang Zhang <silver_code@xxxxxxxxxxx>
• Re: Re: [PATCH v3] i2c: ocores: use devm_ managed clks
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH net-next v8 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH net-next v8 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: RCU WARNING on 6.4-rc2, TI AM62 and TPS65219
  • From: Wadim Egorov <w.egorov@xxxxxxxxx>
• RE: [PATCH net-next v8 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
• [PATCH v1] i2c: designware: Handle invalid SMBus block data response length
  • From: Tam Nguyen <tamnguyenchi@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH net-next v8 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: fix idx_write_cnt in read loop
  • From: David Zheng <david.zheng@xxxxxxxxx>
• Re: Re: [PATCH v3] i2c: ocores: use devm_ managed clks
  • From: 张网 <m202171703@xxxxxxxxxxx>
• RE: [PATCH net-next v8 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• Re: [PATCH net-next v8 6/9] net: txgbe: Support GPIO to SFP socket
  • From: "'Andy Shevchenko'" <andy.shevchenko@xxxxxxxxx>
• Re: RCU WARNING on 6.4-rc2, TI AM62 and TPS65219
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: fix idx_write_cnt in read loop
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• RE: [PATCH v6 RESEND 2/2] i2c: tegra: Share same DMA channel for RX and TX
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH] i2c: Add i2c_get_match_data()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH] i2c: Add i2c_get_match_data()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: RCU WARNING on 6.4-rc2, TI AM62 and TPS65219
  • From: jerome Neanne <jneanne@xxxxxxxxxxxx>
• Re: [PATCH v13 6/8] media: i2c: add DS90UB960 driver
  • From: Ludwig Zenz <lzenz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Add i2c_get_match_data()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH net-next v8 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH v5 13/44] i2c: add HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH] i2c: Add i2c_get_match_data()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v8 5/6] i2c: Add support for Intel LJCA USB I2C driver
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH v8 2/6] usb: ljca: Add transport interfaces for sub-module drivers
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: RCU WARNING on 6.4-rc2, TI AM62 and TPS65219
  • From: jerome Neanne <jneanne@xxxxxxxxxxxx>
• Re: [PATCH v8 1/6] usb: Add support for Intel LJCA device
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• RE: [PATCH net-next v8 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• RE: [PATCH net-next v8 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• Re: [PATCH v5 4/8] pinctrl: wpcm450: relax return value check for IRQ get
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v5 3/8] net-next: mvpp2: relax return value check for IRQ get
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v5 2/8] iio: mb1232: relax return value check for IRQ get
  • From: andy.shevchenko@xxxxxxxxx
• Re: [PATCH v5 4/8] pinctrl: wpcm450: relax return value check for IRQ get
  • From: andy.shevchenko@xxxxxxxxx
• Re: [PATCH v5 3/8] net-next: mvpp2: relax return value check for IRQ get
  • From: andy.shevchenko@xxxxxxxxx
• Re: [PATCH v5 1/8] drivers: fwnode: fix fwnode_irq_get[_byname]()
  • From: andy.shevchenko@xxxxxxxxx
• Re: [PATCH v2] usb: typec: ucsi: Mark dGPUs as DEVICE scope
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [PATCH] i2c: mv64xxx: Fix reading invalid status value in atomic mode
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v2] usb: typec: ucsi: Mark dGPUs as DEVICE scope
  • From: Gregor Riepl <onitake@xxxxxxxxx>
• Re: [PATCH v2] usb: typec: ucsi: Mark dGPUs as DEVICE scope
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v5 2/8] iio: mb1232: relax return value check for IRQ get
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 7/8] iio: cdc: ad7150: relax return value check for IRQ get
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Fwd: ThinkPad L540: suspend not working (deep / S3 / standby, regression Linux 4.19 -> 6.1)
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• RE: [PATCH v4 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RCU WARNING on 6.4-rc2, TI AM62 and TPS65219
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: Fwd: ThinkPad L540: suspend not working (deep / S3 / standby, regression Linux 4.19 -> 6.1)
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• Re: Fwd: ThinkPad L540: suspend not working (deep / S3 / standby, regression Linux 4.19 -> 6.1)
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH net-next v8 2/9] i2c: designware: Add driver support for Wangxun 10Gb NIC
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next v8 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Andrew Lunn <andrew@xxxxxxx>
• Fwd: ThinkPad L540: suspend not working (deep / S3 / standby, regression Linux 4.19 -> 6.1)
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• Re: [PATCH net-next v8 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v4 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v13 6/8] media: i2c: add DS90UB960 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] i2c: i801: Add support for Intel Meteor Lake PCH-S
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 2/3] i2c: i801: Add support for Intel Meteor Lake SoC-S
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 1/3] i2c: i801: Enlarge device name field in i801_ids table
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH v5 8/8] i2c: i2c-smbus: fwnode_irq_get_byname() return value fix
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v5 7/8] iio: cdc: ad7150: relax return value check for IRQ get
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v5 6/8] pinctrl: pistachio: relax return value check for IRQ get
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v5 5/8] pinctrl: ingenic: relax return value check for IRQ get
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v5 4/8] pinctrl: wpcm450: relax return value check for IRQ get
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v5 3/8] net-next: mvpp2: relax return value check for IRQ get
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v5 2/8] iio: mb1232: relax return value check for IRQ get
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v5 1/8] drivers: fwnode: fix fwnode_irq_get[_byname]()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v5 0/8] fix fwnode_irq_get[_byname()] returnvalue
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• RE: [PATCH net-next v8 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: typec: ucsi: Mark dGPUs as DEVICE scope
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• RE: [PATCH net-next v8 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• [PATCH] i2c: designware: fix idx_write_cnt in read loop
  • From: David Zheng <david.zheng@xxxxxxxxx>
• [PATCH v2] usb: typec: ucsi: Mark dGPUs as DEVICE scope
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• Re: [PATCH net-next v8 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH net-next v8 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Michael Walle <michael@xxxxxxxx>
• RE: [PATCH 2/2] usb: typec: ucsi: Don't create power supplies for dGPUs
  • From: "Limonciello, Mario" <Mario.Limonciello@xxxxxxx>
• Re: [PATCH net-next v8 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH net-next v8 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• RE: [PATCH net-next v8 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• Re: [PATCH v6 5/5] mfd: tps6586x: register restart handler
  • From: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
• Re: [PATCH v6 3/5] kernel/reboot: add device to sys_off_handler
  • From: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
• Re: [PATCH v6 4/5] mfd: tps6586x: use devm-based power off handler
  • From: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
• [PATCH v4 01/11] i2c: Enhance i2c_new_ancillary_device API
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v6 2/5] i2c: core: run atomic i2c xfer when !preemptible
  • From: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
• Re: [PATCH v6 1/5] kernel/reboot: emergency_restart: set correct system_state
  • From: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
• Re: [PATCH v6 4/5] mfd: tps6586x: use devm-based power off handler
  • From: Benjamin Bara <bbara93@xxxxxxxxx>
• Re: [PATCH] dt-bindings: xilinx: Switch xilinx.com emails to amd.com
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH v6 5/5] mfd: tps6586x: register restart handler
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v6 4/5] mfd: tps6586x: use devm-based power off handler
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] misc: Switch i2c drivers back to use .probe()
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• [PATCH] misc: Switch i2c drivers back to use .probe()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: typec: ucsi: Don't create power supplies for dGPUs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: typec: ucsi: Don't create power supplies for dGPUs
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 0/2] Adjust logic for power_supply_is_system_supplied()
  • From: "andriy.shevchenko@xxxxxxxxxxxxxxx" <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: typec: ucsi: Don't create power supplies for dGPUs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next v8 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH] dt-bindings: xilinx: Switch xilinx.com emails to amd.com
  • From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
• Re: [PATCH] dt-bindings: xilinx: Switch xilinx.com emails to amd.com
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH net-next v8 6/9] net: txgbe: Support GPIO to SFP socket
  • From: "'Andy Shevchenko'" <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH net-next v8 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH net-next v8 2/9] i2c: designware: Add driver support for Wangxun 10Gb NIC
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] i2c: mchp-pci1xxxx: Avoid cast to incompatible function type
  • From: <Tharunkumar.Pasumarthi@xxxxxxxxxxxxx>
• Re: [PATCH net-next v8 2/9] i2c: designware: Add driver support for Wangxun 10Gb NIC
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• RE: [PATCH net-next v8 2/9] i2c: designware: Add driver support for Wangxun 10Gb NIC
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• Re: [PATCH net-next v8 2/9] i2c: designware: Add driver support for Wangxun 10Gb NIC
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• RE: [PATCH net-next v8 6/9] net: txgbe: Support GPIO to SFP socket
  • From: Jiawen Wu <jiawenwu@xxxxxxxxxxxxxx>
• RE: [PATCH 0/2] Adjust logic for power_supply_is_system_supplied()
  • From: "Quan, Evan" <Evan.Quan@xxxxxxx>
• Re: [PATCH] dt-bindings: xilinx: Switch xilinx.com emails to amd.com
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 1/2] power: supply: Use the scope of power supplies to tell if power is system supplied
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v13 6/8] media: i2c: add DS90UB960 driver
  • From: Ludwig Zenz <lzenz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] power: supply: Use the scope of power supplies to tell if power is system supplied
  • From: "Limonciello, Mario" <mlimonci@xxxxxxx>
• Re: [PATCH 1/2] power: supply: Use the scope of power supplies to tell if power is system supplied
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH 0/4] i2c: i801: next set of improvements
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 2/2] usb: typec: ucsi: Don't create power supplies for dGPUs
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [PATCH 0/2] Adjust logic for power_supply_is_system_supplied()
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• [PATCH 1/2] power: supply: Use the scope of power supplies to tell if power is system supplied
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• Re: [PATCH] dt-bindings: xilinx: Switch xilinx.com emails to amd.com
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: xilinx: Switch xilinx.com emails to amd.com
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v13 6/8] media: i2c: add DS90UB960 driver
  • From: Ludwig Zenz <lzenz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: davinci: Use platform table macro over module_alias
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 2/2] i2c: davinci: Use struct name not type with devm_kzalloc()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 1/1] eeprom: at24: Use dev_err_probe for nvmem register failure
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v13 6/8] media: i2c: add DS90UB960 driver
  • From: Ludwig Zenz <lzenz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: xilinx: Switch xilinx.com emails to amd.com
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v13 6/8] media: i2c: add DS90UB960 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH] dt-bindings: xilinx: Switch xilinx.com emails to amd.com
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH v13 6/8] media: i2c: add DS90UB960 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v13 6/8] media: i2c: add DS90UB960 driver
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH 14/89] i2c: cpm: Convert to platform remove callback returning void
  • From: Jochen Friedrich <jochen@xxxxxxxx>
• [PATCH v4 11/41] i2c: add HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>