From: Gao Pan <pandy.gao@xxxxxxx>
A NACK flag in ISR means i2c bus error. In such codition,
there is no need to do read/write operation. It's better
to return ISR directly and then stop i2c transfer.
Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver")
Signed-off-by: Gao Pan <pandy.gao@xxxxxxx>
Signed-off-by: Carlos Song <carlos.song@xxxxxxx>
---
drivers/i2c/busses/i2c-imx-lpi2c.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index c3287c887c6f..158de0b7f030 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -514,15 +514,14 @@ static irqreturn_t lpi2c_imx_isr(int irq, void *dev_id)
temp = readl(lpi2c_imx->base + LPI2C_MSR);
temp &= enabled;
- if (temp & MSR_RDF)
+ if (temp & MSR_NDF) {
+ complete(&lpi2c_imx->complete);
+ return IRQ_HANDLED;
+ } else if (temp & MSR_RDF)
lpi2c_imx_read_rxfifo(lpi2c_imx);
-
- if (temp & MSR_TDF)
+ else if (temp & MSR_TDF)
lpi2c_imx_write_txfifo(lpi2c_imx);
- if (temp & MSR_NDF)
- complete(&lpi2c_imx->complete);
-
return IRQ_HANDLED;
}
--
2.34.1
