[PATCH v4] i2c: imx-lpi2c: return -EINVAL when i2c peripheral clk doesn't work

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Gao Pan <pandy.gao@xxxxxxx>

When i2c peripheral clk rate is 0 directly return -EINVAL.

Signed-off-by: Gao Pan <pandy.gao@xxxxxxx>
Signed-off-by: Carlos Song <carlos.song@xxxxxxx>
---
Changes for V2:
- adjust the subject from "debug message" to "error message"
Changes for V3:
- remove output error log when i2c peripheral clk doesn't work
- adjust commit log and subject
---
 drivers/i2c/busses/i2c-imx-lpi2c.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index c3287c887c6f..150d923ca7f1 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -209,6 +209,9 @@ static int lpi2c_imx_config(struct lpi2c_imx_struct *lpi2c_imx)
 	lpi2c_imx_set_mode(lpi2c_imx);
 
 	clk_rate = clk_get_rate(lpi2c_imx->clks[0].clk);
+	if (!clk_rate)
+		return -EINVAL;
+
 	if (lpi2c_imx->mode == HS || lpi2c_imx->mode == ULTRA_FAST)
 		filt = 0;
 	else
-- 
2.34.1




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux