Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <frank.li@xxxxxxxx> --- drivers/i2c/busses/i2c-brcmstb.c | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-) diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c index cf92cbcb8c86..0d422487161a 100644 --- a/drivers/i2c/busses/i2c-brcmstb.c +++ b/drivers/i2c/busses/i2c-brcmstb.c @@ -594,11 +594,10 @@ static int bcm2711_release_bsc(struct brcmstb_i2c_dev *dev) static int brcmstb_i2c_probe(struct platform_device *pdev) { - int rc = 0; struct brcmstb_i2c_dev *dev; struct i2c_adapter *adap; - struct resource *iomem; const char *int_name; + int rc; /* Allocate memory for private data structure */ dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); @@ -614,18 +613,15 @@ static int brcmstb_i2c_probe(struct platform_device *pdev) init_completion(&dev->done); /* Map hardware registers */ - iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - dev->base = devm_ioremap_resource(dev->device, iomem); - if (IS_ERR(dev->base)) { - rc = -ENOMEM; - goto probe_errorout; - } + dev->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(dev->base)) + return PTR_ERR(dev->base); if (of_device_is_compatible(dev->device->of_node, "brcm,bcm2711-hdmi-i2c")) { rc = bcm2711_release_bsc(dev); if (rc) - goto probe_errorout; + return rc; } rc = of_property_read_string(dev->device->of_node, "interrupt-names", @@ -678,16 +674,13 @@ static int brcmstb_i2c_probe(struct platform_device *pdev) adap->dev.of_node = pdev->dev.of_node; rc = i2c_add_adapter(adap); if (rc) - goto probe_errorout; + return rc; dev_info(dev->device, "%s@%dhz registered in %s mode\n", int_name ? int_name : " ", dev->clk_freq_hz, (dev->irq >= 0) ? "interrupt" : "polling"); return 0; - -probe_errorout: - return rc; } static void brcmstb_i2c_remove(struct platform_device *pdev) -- 2.39.0