Add a sentinel length value that is used to check whether we should
read and use the length value provided by the slave device.
This simplifies the currently used checks.
Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
---
drivers/i2c/busses/i2c-i801.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index a9d3dfd9e..30a2f9268 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -204,6 +204,8 @@
#define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR | \
STATUS_ERROR_FLAGS)
+#define SMBUS_LEN_SENTINEL (I2C_SMBUS_BLOCK_MAX + 1)
+
/* Older devices have their ID defined in <linux/pci_ids.h> */
#define PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS 0x02a3
#define PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS 0x06a3
@@ -541,8 +543,7 @@ static void i801_isr_byte_done(struct i801_priv *priv)
{
if (priv->is_read) {
/* For SMBus block reads, length is received with first byte */
- if (((priv->cmd & 0x1c) == I801_BLOCK_DATA) &&
- (priv->count == 0)) {
+ if (priv->len == SMBUS_LEN_SENTINEL) {
priv->len = inb_p(SMBHSTDAT0(priv));
if (priv->len < 1 || priv->len > I2C_SMBUS_BLOCK_MAX) {
dev_err(&priv->pci_dev->dev,
@@ -697,8 +698,7 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
if (status)
return status;
- if (i == 1 && read_write == I2C_SMBUS_READ
- && command != I2C_SMBUS_I2C_BLOCK_DATA) {
+ if (len == SMBUS_LEN_SENTINEL) {
len = inb_p(SMBHSTDAT0(priv));
if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
dev_err(&priv->pci_dev->dev,
@@ -805,7 +805,7 @@ static int i801_smbus_block_transaction(struct i801_priv *priv, union i2c_smbus_
u8 addr, u8 hstcmd, char read_write, int command)
{
if (read_write == I2C_SMBUS_READ && command == I2C_SMBUS_BLOCK_DATA)
- data->block[0] = I2C_SMBUS_BLOCK_MAX;
+ data->block[0] = SMBUS_LEN_SENTINEL;
else if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
return -EPROTO;
--
2.42.0
