[PATCH] i2c:octeon:Add block-mode r/w

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support for block mode read/write operations on
Thunderx chips.

When attempting r/w operations of greater then 8 bytes
block mode is used, instead of performing a series of
8 byte reads.

Signed-off-by: Aryan Srivastava <aryan.srivastava@xxxxxxxxxxxxxxxxxxx>
---
Changes in v2:
- comment style and formatting.

Changes in v3:
- comment style and formatting.
---
 drivers/i2c/busses/i2c-octeon-core.c     | 158 ++++++++++++++++++++++-
 drivers/i2c/busses/i2c-octeon-core.h     |  14 ++
 drivers/i2c/busses/i2c-thunderx-pcidrv.c |   4 +
 3 files changed, 170 insertions(+), 6 deletions(-)

diff --git a/drivers/i2c/busses/i2c-octeon-core.c b/drivers/i2c/busses/i2c-octeon-core.c
index 845eda70b8ca..940cc4647cb0 100644
--- a/drivers/i2c/busses/i2c-octeon-core.c
+++ b/drivers/i2c/busses/i2c-octeon-core.c
@@ -130,6 +130,25 @@ static void octeon_i2c_hlc_disable(struct octeon_i2c *i2c)
 	octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
 }
 
+static void octeon_i2c_block_enable(struct octeon_i2c *i2c)
+{
+	if (i2c->block_enabled || !TWSI_BLOCK_CTL(i2c))
+		return;
+
+	i2c->block_enabled = true;
+	octeon_i2c_writeq_flush(TWSI_MODE_STRETCH
+		| TWSI_MODE_BLOCK_MODE, i2c->twsi_base + TWSI_MODE(i2c));
+}
+
+static void octeon_i2c_block_disable(struct octeon_i2c *i2c)
+{
+	if (!i2c->block_enabled || !TWSI_BLOCK_CTL(i2c))
+		return;
+
+	i2c->block_enabled = false;
+	octeon_i2c_writeq_flush(TWSI_MODE_STRETCH, i2c->twsi_base + TWSI_MODE(i2c));
+}
+
 /**
  * octeon_i2c_hlc_wait - wait for an HLC operation to complete
  * @i2c: The struct octeon_i2c
@@ -268,6 +287,7 @@ static int octeon_i2c_start(struct octeon_i2c *i2c)
 	u8 stat;
 
 	octeon_i2c_hlc_disable(i2c);
+	octeon_i2c_block_disable(i2c);
 
 	octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_STA);
 	ret = octeon_i2c_wait(i2c);
@@ -594,6 +614,124 @@ static int octeon_i2c_hlc_comp_write(struct octeon_i2c *i2c, struct i2c_msg *msg
 	return ret;
 }
 
+/* high-level-controller composite block write+read, msg0=addr, msg1=data */
+static int octeon_i2c_hlc_block_comp_read(struct octeon_i2c *i2c, struct i2c_msg *msgs)
+{
+	int i, j, len, ret = 0;
+	u64 cmd = 0, rd = 0;
+
+	octeon_i2c_hlc_enable(i2c);
+	octeon_i2c_block_enable(i2c);
+
+	/* Write (size - 1) into block control register */
+	len = msgs[1].len - 1;
+	octeon_i2c_writeq_flush((u64)(len), i2c->twsi_base + TWSI_BLOCK_CTL(i2c));
+
+	/* Prepare core command */
+	cmd = SW_TWSI_V | SW_TWSI_R | SW_TWSI_SOVR;
+	cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_ADDR_SHIFT;
+
+	if (msgs[0].flags & I2C_M_TEN)
+		cmd |= SW_TWSI_OP_10_IA;
+	else
+		cmd |= SW_TWSI_OP_7_IA;
+
+	if (msgs[0].len == 2) {
+		u64 ext = 0;
+
+		cmd |= SW_TWSI_EIA;
+		ext = (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
+		cmd |= (u64)msgs[0].buf[1] << SW_TWSI_IA_SHIFT;
+		octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT(i2c));
+	} else {
+		cmd |= (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
+	}
+
+	/* Send command to core (send data to FIFO) */
+	octeon_i2c_hlc_int_clear(i2c);
+	octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI(i2c));
+
+	/* Wait for transaction to complete */
+	ret = octeon_i2c_hlc_wait(i2c);
+	if (ret)
+		return ret;
+
+	cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
+	if ((cmd & SW_TWSI_R) == 0)
+		return octeon_i2c_check_status(i2c, false);
+
+	/* read data in FIFO */
+	octeon_i2c_writeq_flush(TWSI_BLOCK_STS_RESET_PTR, i2c->twsi_base + TWSI_BLOCK_STS(i2c));
+	for (i = 0; i < len; i += 8) {
+		rd = __raw_readq(i2c->twsi_base + TWSI_BLOCK_FIFO(i2c));
+		for (j = 7; j >= 0; j--)
+			msgs[1].buf[i + (7 - j)] = (rd >> (8 * j)) & 0xff;
+	}
+
+	octeon_i2c_block_disable(i2c);
+	return ret;
+}
+
+/* high-level-controller composite block write+write, m[0]len<=2, m[1]len<=1024 */
+static int octeon_i2c_hlc_block_comp_write(struct octeon_i2c *i2c, struct i2c_msg *msgs)
+{
+	bool set_ext = false;
+	int i, j, len, ret = 0;
+	u64 cmd, buf = 0, ext = 0;
+
+	octeon_i2c_hlc_enable(i2c);
+	octeon_i2c_block_enable(i2c);
+
+	/* Write (size - 1) into block control register */
+	len = msgs[1].len - 1;
+	octeon_i2c_writeq_flush((u64)(len), i2c->twsi_base + TWSI_BLOCK_CTL(i2c));
+
+	/* Prepare core command */
+	cmd = SW_TWSI_V | SW_TWSI_SOVR;
+	cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_ADDR_SHIFT;
+
+	if (msgs[0].flags & I2C_M_TEN)
+		cmd |= SW_TWSI_OP_10_IA;
+	else
+		cmd |= SW_TWSI_OP_7_IA;
+
+	if (msgs[0].len == 2) {
+		cmd |= SW_TWSI_EIA;
+		ext |= (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
+		set_ext = true;
+		cmd |= (u64)msgs[0].buf[1] << SW_TWSI_IA_SHIFT;
+	} else {
+		cmd |= (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
+	}
+
+	/* Write msg into FIFO buffer */
+	octeon_i2c_writeq_flush(TWSI_BLOCK_STS_RESET_PTR, i2c->twsi_base + TWSI_BLOCK_STS(i2c));
+	for (i = 0; i < len; i += 8) {
+		buf = 0;
+		for (j = 7; j >= 0; j--)
+			buf |= (msgs[1].buf[i + (7 - j)] << (8 * j));
+		octeon_i2c_writeq_flush(buf, i2c->twsi_base + TWSI_BLOCK_FIFO(i2c));
+	}
+	if (set_ext)
+		octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT(i2c));
+
+	/* Send command to core (send data in FIFO) */
+	octeon_i2c_hlc_int_clear(i2c);
+	octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI(i2c));
+
+	/* Wait for transaction to complete */
+	ret = octeon_i2c_hlc_wait(i2c);
+	if (ret)
+		goto ret;
+
+	cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
+	if ((cmd & SW_TWSI_R) == 0)
+		return octeon_i2c_check_status(i2c, false);
+
+	octeon_i2c_block_disable(i2c);
+	return ret;
+}
+
 /**
  * octeon_i2c_xfer - The driver's master_xfer function
  * @adap: Pointer to the i2c_adapter structure
@@ -619,13 +757,21 @@ int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 		if ((msgs[0].flags & I2C_M_RD) == 0 &&
 		    (msgs[1].flags & I2C_M_RECV_LEN) == 0 &&
 		    msgs[0].len > 0 && msgs[0].len <= 2 &&
-		    msgs[1].len > 0 && msgs[1].len <= 8 &&
+		    msgs[1].len > 0 &&
 		    msgs[0].addr == msgs[1].addr) {
-			if (msgs[1].flags & I2C_M_RD)
-				ret = octeon_i2c_hlc_comp_read(i2c, msgs);
-			else
-				ret = octeon_i2c_hlc_comp_write(i2c, msgs);
-			goto out;
+			if (msgs[1].len <= 8) {
+				if (msgs[1].flags & I2C_M_RD)
+					ret = octeon_i2c_hlc_comp_read(i2c, msgs);
+				else
+					ret = octeon_i2c_hlc_comp_write(i2c, msgs);
+				goto out;
+			} else if (msgs[1].len <= 1024 && TWSI_BLOCK_CTL(i2c)) {
+				if (msgs[1].flags & I2C_M_RD)
+					ret = octeon_i2c_hlc_block_comp_read(i2c, msgs);
+				else
+					ret = octeon_i2c_hlc_block_comp_write(i2c, msgs);
+				goto out;
+			}
 		}
 	}
 
diff --git a/drivers/i2c/busses/i2c-octeon-core.h b/drivers/i2c/busses/i2c-octeon-core.h
index 9bb9f64fdda0..81fcf413c890 100644
--- a/drivers/i2c/busses/i2c-octeon-core.h
+++ b/drivers/i2c/busses/i2c-octeon-core.h
@@ -85,6 +85,11 @@
 #define TWSI_INT_SDA		BIT_ULL(10)
 #define TWSI_INT_SCL		BIT_ULL(11)
 
+#define TWSI_MODE_STRETCH		BIT_ULL(1)
+#define TWSI_MODE_BLOCK_MODE		BIT_ULL(2)
+
+#define TWSI_BLOCK_STS_RESET_PTR	BIT_ULL(0)
+#define TWSI_BLOCK_STS_BUSY		BIT_ULL(1)
 #define I2C_OCTEON_EVENT_WAIT 80 /* microseconds */
 
 /* Register offsets */
@@ -92,11 +97,19 @@ struct octeon_i2c_reg_offset {
 	unsigned int sw_twsi;
 	unsigned int twsi_int;
 	unsigned int sw_twsi_ext;
+	unsigned int twsi_mode;
+	unsigned int twsi_block_ctl;
+	unsigned int twsi_block_sts;
+	unsigned int twsi_block_fifo;
 };
 
 #define SW_TWSI(x)	(x->roff.sw_twsi)
 #define TWSI_INT(x)	(x->roff.twsi_int)
 #define SW_TWSI_EXT(x)	(x->roff.sw_twsi_ext)
+#define TWSI_MODE(x)	(x->roff.twsi_mode)
+#define TWSI_BLOCK_CTL(x)	(x->roff.twsi_block_ctl)
+#define TWSI_BLOCK_STS(x)	(x->roff.twsi_block_sts)
+#define TWSI_BLOCK_FIFO(x)	(x->roff.twsi_block_fifo)
 
 struct octeon_i2c {
 	wait_queue_head_t queue;
@@ -110,6 +123,7 @@ struct octeon_i2c {
 	void __iomem *twsi_base;
 	struct device *dev;
 	bool hlc_enabled;
+	bool block_enabled;
 	bool broken_irq_mode;
 	bool broken_irq_check;
 	void (*int_enable)(struct octeon_i2c *);
diff --git a/drivers/i2c/busses/i2c-thunderx-pcidrv.c b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
index a77cd86fe75e..abde98117d7e 100644
--- a/drivers/i2c/busses/i2c-thunderx-pcidrv.c
+++ b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
@@ -165,6 +165,10 @@ static int thunder_i2c_probe_pci(struct pci_dev *pdev,
 	i2c->roff.sw_twsi = 0x1000;
 	i2c->roff.twsi_int = 0x1010;
 	i2c->roff.sw_twsi_ext = 0x1018;
+	i2c->roff.twsi_mode = 0x1038;
+	i2c->roff.twsi_block_ctl = 0x1048;
+	i2c->roff.twsi_block_sts = 0x1050;
+	i2c->roff.twsi_block_fifo = 0x1058;
 
 	i2c->dev = dev;
 	pci_set_drvdata(pdev, i2c);
-- 
2.42.0




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux