Il 14/09/23 11:07, Daniel Golle ha scritto:
On Wed, Sep 13, 2023 at 04:00:53PM +0200, AngeloGioacchino Del Regno wrote:
Il 27/08/23 04:13, Daniel Golle ha scritto:
Using the I2C host controller on the MT7981 SoC requires 4 clocks to
be enabled. One of them, the pmic clk, is only enabled in case
'mediatek,have-pmic' is also set which has other consequences which
are not desired in this case.
Allow defining a pmic clk even in case the 'mediatek,have-pmic' propterty
is not present and the bus is not used to connect to a pmic, but may
still require to enable the pmic clock.
Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-mt65xx.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 1a9b5a068ef1b..a8b5719c33729 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -1442,15 +1442,19 @@ static int mtk_i2c_probe(struct platform_device *pdev)
if (IS_ERR(i2c->clocks[I2C_MT65XX_CLK_ARB].clk))
return PTR_ERR(i2c->clocks[I2C_MT65XX_CLK_ARB].clk);
+ i2c->clocks[I2C_MT65XX_CLK_PMIC].clk = devm_clk_get_optional(&pdev->dev, "pmic");
+ if (IS_ERR(i2c->clocks[I2C_MT65XX_CLK_PMIC].clk)) {
+ dev_err(&pdev->dev, "cannot get pmic clock\n");
+ return PTR_ERR(i2c->clocks[I2C_MT65XX_CLK_PMIC].clk);
+ }
+
if (i2c->have_pmic) {
...but you're not changing speed_clk if !i2c->have_pmic, I'm not sure that
this will work correctly. Perhaps you wanted to also set speed_clk if the
clock is present?
No, if I wanted that I could have used the existing 'mediatek,have-pmic'
property -- however, all needed e.g. on MT7981 is to make sure the
clock is enabled, but still use I2C_MT65XX_CLK_MAIN as speed_clk.
Sorry, I've misunderstood the intention and yes, I understand now.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
