Il 27/08/23 04:13, Daniel Golle ha scritto:
Using the I2C host controller on the MT7981 SoC requires 4 clocks to
be enabled. One of them, the pmic clk, is only enabled in case
'mediatek,have-pmic' is also set which has other consequences which
are not desired in this case.
Allow defining a pmic clk even in case the 'mediatek,have-pmic' propterty
is not present and the bus is not used to connect to a pmic, but may
still require to enable the pmic clock.
Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-mt65xx.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 1a9b5a068ef1b..a8b5719c33729 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -1442,15 +1442,19 @@ static int mtk_i2c_probe(struct platform_device *pdev)
if (IS_ERR(i2c->clocks[I2C_MT65XX_CLK_ARB].clk))
return PTR_ERR(i2c->clocks[I2C_MT65XX_CLK_ARB].clk);
+ i2c->clocks[I2C_MT65XX_CLK_PMIC].clk = devm_clk_get_optional(&pdev->dev, "pmic");
+ if (IS_ERR(i2c->clocks[I2C_MT65XX_CLK_PMIC].clk)) {
+ dev_err(&pdev->dev, "cannot get pmic clock\n");
+ return PTR_ERR(i2c->clocks[I2C_MT65XX_CLK_PMIC].clk);
+ }
+
if (i2c->have_pmic) {
...but you're not changing speed_clk if !i2c->have_pmic, I'm not sure that
this will work correctly. Perhaps you wanted to also set speed_clk if the
clock is present?
if (IS_ERR...) {
error handling
} else if (clk is present)
speed_clk = I2C_MT65XX_CLK_PMIC;
if (have_pmic && !clk_is_present)
error
Regards,
Angelo
- i2c->clocks[I2C_MT65XX_CLK_PMIC].clk = devm_clk_get(&pdev->dev, "pmic");
- if (IS_ERR(i2c->clocks[I2C_MT65XX_CLK_PMIC].clk)) {
+ if (!i2c->clocks[I2C_MT65XX_CLK_PMIC].clk) {
dev_err(&pdev->dev, "cannot get pmic clock\n");
- return PTR_ERR(i2c->clocks[I2C_MT65XX_CLK_PMIC].clk);
+ return -ENODEV;
}
speed_clk = I2C_MT65XX_CLK_PMIC;
} else {
- i2c->clocks[I2C_MT65XX_CLK_PMIC].clk = NULL;
speed_clk = I2C_MT65XX_CLK_MAIN;
}
