Re: [PATCH v3] Currently if the SoC needs pinctrl to switch the SCL and SDA from the I2C function to GPIO function, the recovery won't work.

[Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>]

On Tue, Aug 22, 2023 at 11:15:55AM +0200, Yann Sionneau wrote:
> scl-gpio = <>;
> sda-gpio = <>;
> 
> Are not enough for some SoCs to have a working recovery.
> Some need:
> 
> scl-gpio = <>;
> sda-gpio = <>;
> pinctrl-names = "default", "recovery";
> pinctrl-0 = <&i2c_pins_hw>;
> pinctrl-1 = <&i2c_pins_gpio>;
> 
> The driver was not filling rinfo->pinctrl with the device node
> pinctrl data which is needed by generic recovery code.

With or without my suggestion, FWIW,
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>

-- 
With Best Regards,
Andy Shevchenko