[PATCH v2 0/2] i2c: rcar: improve Gen3 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Here is a series paving the way for Gen4 support. This time we properly
apply the Gen3 specific features. See the patch comments for further
information and changelogs. This has been tested on a Renesas Falcon
board with a R-Car V3U SoC at various bus speeds. Because the
calculation formulas are crucial, testing on board farms would be much
appreciated!

Thanks and happy hacking!


Wolfram Sang (2):
  i2c: rcar: reset controller is mandatory for Gen3+
  i2c: rcar: improve accuracy for R-Car Gen3+

 drivers/i2c/busses/i2c-rcar.c | 150 ++++++++++++++++++++++------------
 1 file changed, 100 insertions(+), 50 deletions(-)

-- 
2.35.1




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux