Linux USB Users

• Thread Index

• ASM1042 SuperSpeed controller[1b21:1042] prevents system from suspending
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] usb: gadget: pch_udc: Fix likely misuse of | for &
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] usb: fix mass storage gadgets to work with Synopsys UDC
  • From: Rajaram R <rajaram.officemail@xxxxxxxxx>
• Re: [PATCH v2] usb: fix mass storage gadgets to work with Synopsys UDC
  • From: Rajaram R <rajaram.officemail@xxxxxxxxx>
• Re: CDC-ACM driver can't communicate with Windows CE Satellite Phone - Could be an MS Active Sync issue ?
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: CDC-ACM driver can't communicate with Windows CE Satellite Phone - Could be an MS Active Sync issue ?
  • From: Ashok Rao <ashok@xxxxxxxxxxxxxx>
• Re: Bug#675093: linux-image-3.2.0-2-amd64: USB "timeout initializing reports" with Eaton UPS
  • From: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
• Re: [PATCH] USB: serial: Enforce USB driver and USB serial driver match
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] USB: option: Updated Huawei K4605 has better id
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• [PATCH 0/4] treewide: Fix likely misuses of | for &
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 4/4] usb: gadget: pch_udc: Fix likely misuse of | for &
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH] FunctionFS: add HID descriptor support.
  • From: Koen Beel <koen.beel@xxxxxxxxx>
• Re: CDC-ACM driver can't communicate with Windows CE Satellite Phone - Could be an MS Active Sync issue ?
  • From: Ashok Rao <ashok@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: fix possible oops in serial option driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/3] drivers: usb: otg: add a new driver for omap usb2 phy
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [RFC PATCH 3/3] arm: omap: phy: remove unused functions from omap-phy-internal.c
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH] USB: serial: Enforce USB driver and USB serial driver match
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 0/3] usb: musb: add new phy driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 1/3] drivers: usb: otg: add a new driver for omap usb2 phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 2/3] usb: musb: omap glue: use omap-usb2 as the phy driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [RFC PATCH 3/3] arm: omap: phy: remove unused functions from omap-phy-internal.c
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: Problems with USB serial interfaces (Serial gadget and CP2102)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: chipidea: select USB_EHCI_ROOT_HUB_TT in USB_CHIPIDEA_HOST of Kconfig
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: chipidea: select USB_EHCI_ROOT_HUB_TT in USB_CHIPIDEA_HOST of Kconfig
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] USB: serial: Enforce USB driver and USB serial driver match
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH v2] USB: serial: Enforce USB driver and USB serial driver match
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH]USB:storage:fixed space issues in coding style.
  • From: Jeffrin Jose <ahiliation@xxxxxxxxxxx>
• Re: Making release tarballs of usbip-utils
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] USB: option: use usb_{get,set}_serial_data
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 0/3] USB: option: clean up probe
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 3/3] USB: option: handle send_setup blacklisting at probe
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 2/3] USB: option: clean up probe coding style
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH] usb: fix possible oops in serial option driver
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH v3 3/3] usb: otg: utils: devres: Add API's to associate a device with the phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 1/3] usb: otg: utils: rename function name in OTG utils
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 2/3] usb: otg: support for multiple transceivers by a single controller
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 0/3] usb: multi-phy support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Making release tarballs of usbip-utils
  • From: Natanael Copa <ncopa@xxxxxxxxxxxxxxx>
• [PATCH v2] USB: serial: Enforce USB driver and USB serial driver match
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH] usb/xhci: unify parameter of xhci_msi_irq
  • From: Alex Shi <alex.shi@xxxxxxxxx>
• Re: [PATCH] USB: serial: Enforce USB driver and USB serial driver match
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: Problems with USB serial interfaces (Serial gadget and CP2102)
  • From: MC Potgieter <bluscape@xxxxxxxxx>
• Re: Problems with USB serial interfaces (Serial gadget and CP2102)
  • From: MC Potgieter <bluscape@xxxxxxxxx>
• [PATCH v2] drivers: usb: musb: add bf60x support
  • From: Bob Liu <lliubbo@xxxxxxxxx>
• Re: [PATCH] usb: chipidea: select USB_EHCI_ROOT_HUB_TT in USB_CHIPIDEA_HOST of Kconfig
  • From: Richard Zhao <linuxzsc@xxxxxxxxx>
• Re: HID Output and Feature Reports
  • From: Joao Paulo Rechi Vita <jprvita@xxxxxxxxxxxxx>
• Re: Using the SLOB SLAB allocator causes USB Host enumeration failures on at91rm9200
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Problems with USB serial interfaces (Serial gadget and CP2102)
  • From: MC Potgieter <bluscape@xxxxxxxxx>
• Re: Using the SLOB SLAB allocator causes USB Host enumeration failures on at91rm9200
  • From: Guan <guanx.bac@xxxxxxxxx>
• Re: Using the SLOB SLAB allocator causes USB Host enumeration failures on at91rm9200
  • From: Guan <guanx.bac@xxxxxxxxx>
• Re: Using the SLOB SLAB allocator causes USB Host enumeration failures on at91rm9200
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: serial: Enforce USB driver and USB serial driver match
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: serial: Enforce USB driver and USB serial driver match
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Using the SLOB SLAB allocator causes USB Host enumeration failures on at91rm9200
  • From: Guan <guanx.bac@xxxxxxxxx>
• Re: [PATCH] USB: serial: Enforce USB driver and USB serial driver match
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: serial: Enforce USB driver and USB serial driver match
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH] USB: serial: Enforce USB driver and USB serial driver match
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH] USB: serial: Enforce USB driver and USB serial driver match
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH] USB: serial: Enforce USB driver and USB serial driver match
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: serial: Enforce USB driver and USB serial driver match
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [RFC 2/3] net: qmi_wwan: Define a struct for driver specific state
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [RFC 3/3] net: qmi_wwan: Bind to both control and data interface
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [RFC 1/3] USB: cdc-wdm: QMI devices are now handled by qmi_wwan
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [RFC 0/3] change qmi_wwan probe to always match on control interface
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH] USB: serial: Enforce USB driver and USB serial driver match
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH] USB: serial: Enforce USB driver and USB serial driver match
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH] USB: serial: Enforce USB driver and USB serial driver match
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: serial: Enforce USB driver and USB serial driver match
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] USB: serial: Enforce USB driver and USB serial driver match
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH] USB: option: fix memory leak
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: Device Enumeration Failure
  • From: Anil Nair <anilcoll90@xxxxxxxxx>
• [PATCH] USB: option: fix port-data abuse
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: looking for kickstart advice for CP2112, usb-i2c bridge
  • From: Jean-François Dagenais <jeff.dagenais@xxxxxxxxx>
• Re: usb, davinci: usb 2.0 problem on an am1808 based board
  • From: Heiko Schocher <hs@xxxxxxx>
• Re: Full speed device support for dwc_otg host controller.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 6/6] usb: gadget: omap_udc: use generic map/unmap routines
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 5/6] usb: gadget: omap_udc: kfree(NULL) is safe
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 4/6] usb: gadget: omap_udc: remove possiblity of NULL pointer de-reference
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/6] usb: gadget: omap_udc: remove useless print
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 3/6] usb: gadget: omap_udc: let it work as a module
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/6] usb: gadget: omap_udc: make checkpatch.pl happy
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/6] usb: gadget: omap_udc: cleanup patches
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 0/2] usb: multi-phy support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 2/2] usb: otg: support for multiple transceivers by a single controller
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 1/2] usb: otg: utils: rename function name in OTG utils
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 14/15] usb: imx21-hcd.c: Use clk_prepare_enable/clk_disable_unprepare
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 13/15] usb: imx_udc.c: Use clk_prepare_enable/clk_disable_unprepare
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 12/15] usb: fsl_mxc_udc.c : Use clk_prepare_enable/clk_disable_unprepare
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Full speed device support for dwc_otg host controller.
  • From: Rajeev kumar <rajeev-dlh.kumar@xxxxxx>
• [PATCH] usb: renesas_usbhs: add DMAEngine ID specification note
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH v1 2/2] usb: otg: support for multiple transceivers by a single controller
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH v3 05/12] usb: chipidea: add imx platform driver
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: looking for kickstart advice for CP2112, usb-i2c bridge
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 05/12] usb: chipidea: add imx platform driver
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: looking for kickstart advice for CP2112, usb-i2c bridge
  • From: Jean-François Dagenais <jeff.dagenais@xxxxxxxxx>
• Re: [PATCH v1 2/2] usb: otg: support for multiple transceivers by a single controller
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: looking for kickstart advice for CP2112, usb-i2c bridge
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [-next regression] USB keyboard stops working occasionally
  • From: Jiri Slaby <jslaby@xxxxxxx>
• Re: Full speed device support for dwc_otg host controller.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 3/3] usb : Add sysfs files to control usb port's power
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] usb: otg: support for multiple transceivers by a single controller
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/6] USB: serial: Changes to conform with checkpatch.sh script.
  • From: Ben Minerds <puzzleduck@xxxxxxxxx>
• [PATCH 2/6] USB: serial: Changes to conform with checkpatch.sh script. - spaces around '?' and ':'.
  • From: Ben Minerds <puzzleduck@xxxxxxxxx>
• [PATCH 3/6] USB: serial: Changes to conform with checkpatch.sh script. - space around '='
  • From: Ben Minerds <puzzleduck@xxxxxxxxx>
• [PATCH 4/6] USB: serial: Changes to conform with checkpatch.sh script. - space near open parenthesis '('.
  • From: Ben Minerds <puzzleduck@xxxxxxxxx>
• [PATCH 5/6] USB: serial: Changes to conform with checkpatch.sh script. - trailing whitespace.
  • From: Ben Minerds <puzzleduck@xxxxxxxxx>
• [PATCH 6/6] USB: serial: Changes to conform with checkpatch.sh script. - return is not a function, parentheses not required.
  • From: Ben Minerds <puzzleduck@xxxxxxxxx>
• Re: [RFC PATCH] USB: remove CONFIG_USB_DEVICEFS
  • From: Ezequiel Garcia <elezegarcia@xxxxxxxxx>
• [PATCH 1/6] USB: serial: Changes to conform with checkpatch.sh script. - no space before tabs
  • From: Ben Minerds <puzzleduck@xxxxxxxxx>
• Re: [RFC PATCH] USB: remove CONFIG_USB_DEVICEFS
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: looking for kickstart advice for CP2112, usb-i2c bridge
  • From: Jean-François Dagenais <jeff.dagenais@xxxxxxxxx>
• [PATCH v1 2/2] usb: otg: support for multiple transceivers by a single controller
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v1 1/2] usb: otg: utils: rename function name in OTG utils
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v1 0/2] usb: multi-phy support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [RFC PATCH] USB: remove CONFIG_USB_DEVICEFS
  • From: Ezequiel Garcia <elezegarcia@xxxxxxxxx>
• [PATCH] USB: option: Updated Huawei K4605 has better id
  • From: Andrew Bird <ajb@xxxxxxxxxxxxxxxxxxx>
• Re: [Libusbx-devel] usbdevfs: BULK_CONTINUATION flag does not work with XHCI controller
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Break point not hit while debugging linux kernel with kgdb
  • From: prasannatsmkumar <prasannatsmkumar@xxxxxxxxx>
• Davinci (and other?) MUSB does not unload cleanly as module
  • From: Jon Povey <Jon.Povey@xxxxxxxxxxxxxxx>
• Re: Device Enumeration Failure
  • From: Gerhard Thomas <gerhardthomas123@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/3] xhci: Add clear PORT_POWER feature process in the xhci_hub_control()
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [RFC PATCH 3/3] usb : Add sysfs files to control usb port's power
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [RFC PATCH 1/3] xhci: Add clear PORT_POWER feature process in the xhci_hub_control()
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: [PATCH] usb: gadget: f_mass_storage: change default value of the removable parameter
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• Re: Using the SLOB SLAB allocator causes USB Host enumeration failures on at91rm9200
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: f_mass_storage: change default value of the removable parameter
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• change qmi_wwan probe to always match on control interface? (was: Re: [PATCH v2] usb: cdc-wdm: Add device-id for Huawei 3G/LTE modems)
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: Using the SLOB SLAB allocator causes USB Host enumeration failures on at91rm9200
  • From: Guan <guanx.bac@xxxxxxxxx>
• Re: Device Enumeration Failure
  • From: Anil Nair <anilcoll90@xxxxxxxxx>
• Re: Device Enumeration Failure
  • From: Anil Nair <anilcoll90@xxxxxxxxx>
• [PATCH] usb: gadget: f_mass_storage: change default value of the removable parameter
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: Device Enumeration Failure
  • From: Gerhard Thomas <gerhardthomas123@xxxxxxxxxxxxxx>
• Re: Device Enumeration Failure
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 00/12] add imx usb driver for mx28/6x
  • From: Richard Zhao <linuxzsc@xxxxxxxxx>
• Re: [PATCH v3 00/12] add imx usb driver for mx28/6x
  • From: Marek Vasut <marex@xxxxxxx>
• Re: HID Output and Feature Reports
  • From: David Herrmann <dh.herrmann@xxxxxxxxxxxxxx>
• Re: [PATCH] [g_mass_storage] Fix unmount problem with OS-X
  • From: Anthony Foiani <tkil@xxxxxxxxx>
• Re: Device Enumeration Failure
  • From: Anil Nair <anilcoll90@xxxxxxxxx>
• [PATCH] USB: ftdi-sio: Add support for RT Systems USB-RTS01 serial adapter
  • From: Evan McNabb <evan@xxxxxxxxxxx>
• Re: Device Enumeration Failure
  • From: Anil Nair <anilcoll90@xxxxxxxxx>
• Re: looking for kickstart advice for CP2112, usb-i2c bridge
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Libusbx-devel] usbdevfs: BULK_CONTINUATION flag does not work with XHCI controller
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• looking for kickstart advice for CP2112, usb-i2c bridge
  • From: Jean-François Dagenais <jeff.dagenais@xxxxxxxxx>
• [PATCH 13/15] usb: imx_udc.c: Use clk_prepare_enable/clk_disable_unprepare
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH 14/15] usb: imx21-hcd.c: Use clk_prepare_enable/clk_disable_unprepare
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH 12/15] usb: fsl_mxc_udc.c : Use clk_prepare_enable/clk_disable_unprepare
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [Libusbx-devel] usbdevfs: BULK_CONTINUATION flag does not work with XHCI controller
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH] usb: musb_gadget: fix crash caused by dangling pointer
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [Libusbx-devel] usbdevfs: BULK_CONTINUATION flag does not work with XHCI controller
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• HID Output and Feature Reports
  • From: Joao Paulo Rechi Vita <jprvita@xxxxxxxxxxxxx>
• usbdevfs: BULK_CONTINUATION flag does not work with XHCI controller
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Debuging large transfer under usb3 device
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: fix possible oops in serial option driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] USB: serial: handle disconnect for dtr_rts in core
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] [g_mass_storage] Fix unmount problem with OS-X
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• Re: [PATCH] usb: fix possible oops in serial option driver
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH v3 05/12] usb: chipidea: add imx platform driver
  • From: Steve Calfee <stevecalfee@xxxxxxxxx>
• [RFC] USB: serial: handle disconnect for dtr_rts in core
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH] usb: fix possible oops in serial option driver
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [RFC PATCH 3/3] usb : Add sysfs files to control usb port's power
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] [g_mass_storage] Fix unmount problem with OS-X
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Device Enumeration Failure
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Device Enumeration Failure
  • From: Gerhard Thomas <gerhardthomas123@xxxxxxxxxxxxxx>
• Re: USB device PM oddity in 3.5
  • From: Josh Boyer <jwboyer@xxxxxxxxxx>
• [PATCH V3 2/4] usb: move struct usb_device->children to struct usb_hub_port->child
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH V3 3/4] usb/acpi: add the support of usb hub ports' acpi binding without attached devices.
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH V3 1/4] usb: add struct usb_hub_port to store port related members.
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH V3 4/4] usb/acpi: add usb check for the connect type of usb port
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: Code flow from device connection to device node in /dev creation
  • From: Anil Nair <anilcoll90@xxxxxxxxx>
• [PATCH V4] USB: DWC3: Fix missed isoc IN transaction
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [RFC PATCH] USB: remove CONFIG_USB_DEVICEFS
  • From: Jeff Chua <jeff.chua.linux@xxxxxxxxx>
• Re: [PATCH V3] USB: DWC3: Fix missed isoc IN transaction
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH V3] USB: DWC3: Fix missed isoc IN transaction
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: USB device PM oddity in 3.5
  • From: Matthew Garrett <mjg@xxxxxxxxxx>
• Re: USB device PM oddity in 3.5
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: CDC-ACM driver can't communicate with Windows CE Satellite Phone - Could be an MS Active Sync issue ?
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: USB device PM oddity in 3.5
  • From: Matthew Garrett <mjg@xxxxxxxxxx>
• Re: USB device PM oddity in 3.5
  • From: Josh Boyer <jwboyer@xxxxxxxxxx>
• Re: USB device PM oddity in 3.5
  • From: Josh Boyer <jwboyer@xxxxxxxxxx>
• Re: USB device PM oddity in 3.5
  • From: Matthew Garrett <mjg@xxxxxxxxxx>
• Re: USB device PM oddity in 3.5
  • From: Josh Boyer <jwboyer@xxxxxxxxxx>
• Re: [RFC PATCH] USB: remove CONFIG_USB_DEVICEFS
  • From: Kay Sievers <kay@xxxxxxxx>
• Re: [PATCH] [g_mass_storage] Fix unmount problem with OS-X
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 05/12] usb: chipidea: add imx platform driver
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: add trace support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH] USB: remove CONFIG_USB_DEVICEFS
  • From: Kay Sievers <kay@xxxxxxxx>
• Re: [PATCH v3 05/12] usb: chipidea: add imx platform driver
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v3 05/12] usb: chipidea: add imx platform driver
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: remove CONFIG_USB_DEVICEFS
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: remove CONFIG_USB_DEVICEFS
  • From: Jeff Chua <jeff.chua.linux@xxxxxxxxx>
• Re: Code flow from device connection to device node in /dev creation
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Code flow from device connection to device node in /dev creation
  • From: prasannatsmkumar <prasannatsmkumar@xxxxxxxxx>
• Re: [RFC PATCH] USB: remove CONFIG_USB_DEVICEFS
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 0/3] USB/ACPI: Add usb port power off mechanism
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [RFC PATCH 1/3] xhci: Add clear PORT_POWER feature process in the xhci_hub_control()
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [RFC PATCH 3/3] usb : Add sysfs files to control usb port's power
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [RFC PATCH 2/3] USB/ACPI: Add usb port's acpi power control in the xhci PORT_POWER feature request process.
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Why USB LPM is not supported on non-root hub?
  • From: prasannatsmkumar <prasannatsmkumar@xxxxxxxxx>
• Re: [RFC PATCH] USB: remove CONFIG_USB_DEVICEFS
  • From: Jeff Chua <jeff.chua.linux@xxxxxxxxx>
• [PATCH] usb: chipidea: select USB_EHCI_ROOT_HUB_TT in USB_CHIPIDEA_HOST of Kconfig
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v3 01/12] usb: otg: add notify_connect/notify_disconnect callback
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v3 07/12] ARM: imx6q: add config-on-boot gpios
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v3 12/12] ARM: dts: imx28-evk: add usb devices
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v3 10/12] ARM: dts: imx6q-sabrelite: add usb devices
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v3 11/12] ARM: mxs: clk_register_clkdev mx28 usb clocks
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v3 09/12] ARM: imx6q: disable usb charger detector
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v3 08/12] ARM: imx6q: add usbphy clocks
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v3 06/12] ARM: imx6q: correct device name of usbphy and usb controller clock export
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v3 02/12] usb: chipidea: permit driver bindings pass phy pointer
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v3 05/12] usb: chipidea: add imx platform driver
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v3 04/12] usb: otg: add basic mxs phy driver support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v3 03/12] usb: ehci-hcd: notify phy when connect change
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v3 00/12] add imx usb driver for mx28/6x
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v5] usb: gadget: mv: Add USB 3.0 device driver for Marvell PXA2128 chip.
  • From: Yu Xu <yuxu@xxxxxxxxxxx>
• RE: [PATCH] usb: musb: davinci: Fix build breakage
  • From: Jon Povey <Jon.Povey@xxxxxxxxxxxxxxx>
• [PATCH v2] usb: musb: davinci: Fix build breakage
  • From: Jon Povey <jon.povey@xxxxxxxxxxxxxxx>
• Re: Device Enumeration Failure
  • From: Anil Nair <anilcoll90@xxxxxxxxx>
• Re: CDC-ACM driver can't communicate with Windows CE Satellite Phone - Could be an MS Active Sync issue ?
  • From: Ashok Rao <ashok@xxxxxxxxxxxxxx>
• Re: Debuging large transfer under usb3 device
  • From: Guillaume Jaouen <guillaume.jaouen@xxxxxxx>
• Re: [PATCH] usb: dwc3: add trace support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: remove CONFIG_USB_DEVICEFS
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Device Enumeration Failure
  • From: Gerhard Thomas <gerhardthomas123@xxxxxxxxxxxxxx>
• Re: USB device PM oddity in 3.5
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• USB device PM oddity in 3.5
  • From: Josh Boyer <jwboyer@xxxxxxxxxx>
• Re: [PATCH] net: qmi_wwan: Add Sierra Wireless device IDs
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: Device Enumeration Failure
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Device Enumeration Failure
  • From: Gerhard Thomas <gerhardthomas123@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: davinci: Fix build breakage
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [RFC PATCH] USB: remove CONFIG_USB_DEVICEFS
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: remove CONFIG_USB_DEVICEFS
  • From: Jeff Chua <jeff.chua.linux@xxxxxxxxx>
• RE: about input/hid
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• Re: USB2.0 [EHCI] Issue : EHCI interrupt endpoints transfer is taking above 600 microsec on USB 2.0 host
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: fix possible oops in serial option driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] [g_mass_storage] Fix unmount problem with OS-X
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• about input/hid
  • From: loody <miloody@xxxxxxxxx>
• [PATCH] usb: dwc3: add trace support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v4] usb: gadget: mv: Add USB 3.0 device driver for Marvell PXA2128 chip.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v4] USB: Chipidea: add ci13xxx device id management
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v4] USB: Chipidea: add ci13xxx device id management
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH v4] usb: gadget: mv: Add USB 3.0 device driver for Marvell PXA2128 chip.
  • From: Yu Xu <yuxu42@xxxxxxxxx>
• Re: [PATCH] usb: musb: davinci: Fix build breakage
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH v4] USB: Chipidea: add ci13xxx device id management
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v3] USB: Chipidea: add ci13xxx device id management
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: s3c-hsotg: Use devm_* functions in s3c-hsotg.c file
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/1] usb: s3c-hsotg: Use devm_* functions in s3c-hsotg.c file
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• [PATCH 15/15] usb: dwc3: gadget: move AcceptU1Ena and AcceptU2Ena to Reset IRQ
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 14/15] usb: dwc3: gadget: disable U1/U2 on disconnect
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 13/15] usb: dwc3: gadget: prevent DCTL register corruption
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 12/15] usb: dwc3: core: make sure evt->lpos is correctly initialized
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 11/15] usb: dwc3: support new revisions of DWC3 core
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 10/15] usb: dwc3: gadget: rename phy_power() to phy_suspend()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 09/15] usb: dwc3: gadget: reinitialize retries
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 08/15] usb: dwc3: add definitions for new registers
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 07/15] usb: dwc3: drop HAVE_CLK dependency from Exynos glue layer
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 06/15] usb: dwc3: gadget: remove trailing semicolon
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 05/15] usb: dwc3: ep0: fix a typo in comment
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 04/15] usb: dwc3: ep0: align on function signature
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 03/15] usb: dwc3: ep0: switch over to IS_ALIGNED
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 02/15] usb: dwc3: handle pending unaligned Control OUT data phase correctly
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 01/15] usb: dwc3: fix a WARN and a comment
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 00/15] pending dwc3 patches
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v4] usb: gadget: mv: Add USB 3.0 device driver for Marvell PXA2128 chip.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: USB2.0 [EHCI] Issue : EHCI interrupt endpoints transfer is taking above 600 microsec on USB 2.0 host
  • From: Aman Bansal <amanbansal1986@xxxxxxxxx>
• Re: [PATCH v4] usb: gadget: mv: Add USB 3.0 device driver for Marvell PXA2128 chip.
  • From: Yu Xu <yuxu42@xxxxxxxxx>
• Re: [PATCH v4] usb: gadget: mv: Add USB 3.0 device driver for Marvell PXA2128 chip.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3] USB: Chipidea: add ci13xxx device id management
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH v4] usb: gadget: mv: Add USB 3.0 device driver for Marvell PXA2128 chip.
  • From: Yu Xu <yuxu42@xxxxxxxxx>
• [PATCH v3] USB: Chipidea: add ci13xxx device id management
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH] USB: Chipidea: add unified ci13xxx_{add,remove}_device for platform drivers
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Certain about struct *usb_otg at struct usb_phy
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH] net: qmi_wwan: Add Sierra Wireless device IDs
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH] USB: qcserial: Add Sierra Wireless device IDs
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH v4] usb: gadget: mv: Add USB 3.0 device driver for Marvell PXA2128 chip.
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 3/4] USB: Chipidea: add unified ci13xxx_{add,remove}_device for platform drivers
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: fix possible oops in serial option driver
  • From: Jan Safrata <jan.nikitenko@xxxxxxxxx>
• Re: USB Serial Converter driver and multiple devices
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [uclinux-dist-devel] [PATCH] drivers: usb: musb: add bf60x support
  • From: Mike Frysinger <vapier@xxxxxxxxxx>
• Re: [PATCH v2 00/12] add imx usb driver for mx28/6x
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH] usb: musb: davinci: Fix build breakage
  • From: Jon Povey <jon.povey@xxxxxxxxxxxxxxx>
• RE: DaVinci MUSB driver compile errors on 3.4
  • From: Jon Povey <Jon.Povey@xxxxxxxxxxxxxxx>
• Re: [PATCH] USB: DWC3: Fix missed isoc IN transaction
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH v3 3/4] USB: Chipidea: add unified ci13xxx_{add,remove}_device for platform drivers
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH] [g_mass_storage] Fix unmount problem with OS-X
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: USB Serial Converter driver and multiple devices
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: [PATCH] [g_mass_storage] Fix unmount problem with OS-X
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] [g_mass_storage] Fix unmount problem with OS-X
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB Serial Converter driver and multiple devices
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: Debuging large transfer under usb3 device
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] USB: Chipidea: add unified ci13xxx_{add,remove}_device for platform drivers
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: CDC-ACM driver can't communicate with Windows CE Satellite Phone - Could be an MS Active Sync issue ?
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• RE: [PATCH] USB: DWC3: Fix missed isoc IN transaction
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH] [g_mass_storage] Fix unmount problem with OS-X
  • From: Russ Dill <Russ.Dill@xxxxxx>
• Re: [PATCH] [g_mass_storage] Fix unmount problem with OS-X
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• Re: DaVinci MUSB driver compile errors on 3.4
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH] [g_mass_storage] Fix unmount problem with OS-X
  • From: Russ Dill <Russ.Dill@xxxxxx>
• Re: [PATCH] [g_mass_storage] Fix unmount problem with OS-X
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] [g_mass_storage] Fix unmount problem with OS-X
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] [g_mass_storage] Fix unmount problem with OS-X
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] [g_mass_storage] Fix unmount problem with OS-X
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] [g_mass_storage] Fix unmount problem with OS-X
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] [g_mass_storage] Fix unmount problem with OS-X
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: CDC-ACM driver can't communicate with Windows CE Satellite Phone - Could be an MS Active Sync issue ?
  • From: Ashok Rao <ashok@xxxxxxxxxxxxxx>
• [PATCH v2 2/4] USB: Chipidea: rename struct ci13xxx variables from udc to ci
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v2 1/4] USB: Chipidea: rename struct ci13xxx_udc_driver to struct ci13xxx_platform_data
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v3 3/4] USB: Chipidea: add unified ci13xxx_{add,remove}_device for platform drivers
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v2 4/4] USB: Chipidea: add ci13xxx device id management
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v2 0/4] usb: chipidea: correct naming and id management
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH] [g_mass_storage] Fix unmount problem with OS-X
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ammendement to commit aaa0ef289afe9186f81e2340114ea413eef0492a
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] USB: Chipidea: use simple incremental integter as device id
  • From: Richard Zhao <linuxzsc@xxxxxxxxx>
• Re: [PATCH 00/10] Android Composite Gadget driver
  • From: Todor Gyumyushev <yodor1@xxxxxxxxx>
• Re: [PATCH] USB: DWC3: Fix missed isoc IN transaction
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: DWC3: Fix missed isoc IN transaction
  • From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
• Re: [PATCH] [g_mass_storage] Fix unmount problem with OS-X
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: fix possible oops in serial option driver
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH] USB: DWC3: Fix missed isoc IN transaction
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] USB: DWC3: Fix missed isoc IN transaction
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: chipidea: remove unneeded NULL check
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 05/12] usb: chipidea: add imx driver binding
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 05/12] usb: chipidea: add imx driver binding
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 05/12] usb: chipidea: add imx driver binding
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• [PATCH] usb: chipidea: remove unneeded NULL check
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• [PATCH] [g_mass_storage] Fix unmount problem with OS-X
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] USB: Chipidea: use simple incremental integter as device id
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/4] USB: Chipidea: use simple incremental integter as device id
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] USB: Chipidea: use simple incremental integter as device id
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/4] USB: Chipidea: use simple incremental integter as device id
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] drivers: usb: musb: add bf60x support
  • From: Bob Liu <lliubbo@xxxxxxxxx>
• Re: [PATCH 4/4] USB: Chipidea: use simple incremental integter as device id
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] USB: Chipidea: use simple incremental integter as device id
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] USB: Chipidea: use simple incremental integter as device id
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] USB: Chipidea: use simple incremental integter as device id
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/4] USB: Chipidea: rename struct ci13xxx_udc_driver to struct ci13xxx_platform_data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/4] USB: Chipidea: rename struct ci13xxx variables from udc to ci
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] USB: Chipidea: add unified ci13xxx_add_device for platform drivers
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2] USB: Chipidea: add unified ci13xxx_add_device for platform drivers
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH 3/4] USB: Chipidea: add unified ci13xxx_add_device for platform drivers
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v2 02/12] usb: chipidea: permit driver bindings pass phy pointer
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] USB: Chipidea: add unified ci13xxx_add_device for platform drivers
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: fix possible oops in serial option driver
  • From: Matthias Urlichs <matthias@xxxxxxxxxx>
• Re: [PATCH] usb: fix possible oops in serial option driver
  • From: Jan Safrata <jan.nikitenko@xxxxxxxxx>
• Re: [PATCH] USB: DWC3: Fix missed isoc IN transaction
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• DaVinci MUSB driver compile errors on 3.4
  • From: Jon Povey <Jon.Povey@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] testusb: expose looping forever option "l" to user
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• [PATCH 3/4] USB: Chipidea: add unified ci13xxx_add_device for platform drivers
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH 4/4] USB: Chipidea: use simple incremental integter as device id
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH 2/4] USB: Chipidea: rename struct ci13xxx variables from udc to ci
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH 1/4] USB: Chipidea: rename struct ci13xxx_udc_driver to struct ci13xxx_platform_data
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v2] testusb: expose looping forever option "l" to user
  • From: "Du, ChangbinX" <changbinx.du@xxxxxxxxx>
• RE: [PATCH] testusb: enable option "-l" in command line
  • From: "Du, ChangbinX" <changbinx.du@xxxxxxxxx>
• RE: [PATCH v2 02/12] usb: chipidea: permit driver bindings pass phy pointer
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: [PATCH v3] testusb: add path /dev/bus/usb to default search paths of usbfs
  • From: David Rientjes <rientjes@xxxxxxxxxx>
• Re: [PATCH] usb-hid-core: Set intfdata to NULL if probe fails
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCH] usb-hid-core: Set intfdata to NULL if probe fails
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] device-core: Ensure drvdata = NULL when no driver is bound
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] usb-hid-core: Set intfdata to NULL if probe fails
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] usb-hid-core: Set intfdata to NULL if probe fails
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCH] testusb: enable option "-l" in command line
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• Re: CDC-ACM driver can't communicate with Windows CE Satellite Phone - Could be an MS Active Sync issue ?
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [patch] USB: Checking the wrong variable in usb_disable_lpm()
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• CDC-ACM driver can't communicate with Windows CE Satellite Phone - Could be an MS Active Sync issue ?
  • From: Ashok Rao <ashok@xxxxxxxxxxxxxx>
• [PATCH] mct_u232: Fix incorrect TIOCMSET return
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] USB: DWC3: Fix missed isoc IN transaction
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• RE: [PATCH] USB: DWC3: Fix missed isoc IN transaction
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH 00/18] Use usb_endpoint_descriptor inside the struct usb_ep
  • From: Felipe Balbi <balbi@xxxxxx>
• re: xhci: Add infrastructure for host-specific LPM policies.
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [patch] USB: Checking the wrong variable in usb_disable_lpm()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: About Data Aggregation with RNDIS and u_ether Driver
  • From: Felipe Balbi <balbi@xxxxxx>
• USB GSM modem crash - help needed
  • From: Andrew Watts <akwatts@xxxxxxxxx>
• Re: [PATCH] ammendement to commit aaa0ef289afe9186f81e2340114ea413eef0492a
  • From: Ricardo Martins <rasm@xxxxxxxx>
• Re: [PATCH] ammendement to commit aaa0ef289afe9186f81e2340114ea413eef0492a
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH] USB: EHCI: Fix build warning in xilinx ehci driver
  • From: Herton Ronaldo Krzesinski <herton.krzesinski@xxxxxxxxxxxxx>
• Re: [PATCH] ammendement to commit aaa0ef289afe9186f81e2340114ea413eef0492a
  • From: Ricardo Martins <rasm@xxxxxxxx>
• Re: [PATCH 3/4] ARM: OMAP: Make FS USB omap1 only
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/4] USB: Remove omap2 support from omap_udc.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ammendement to commit aaa0ef289afe9186f81e2340114ea413eef0492a
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] ammendement to commit aaa0ef289afe9186f81e2340114ea413eef0492a
  • From: Ricardo Martins <rasm@xxxxxxxx>
• Re: About Data Aggregation with RNDIS and u_ether Driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ammendement to commit aaa0ef289afe9186f81e2340114ea413eef0492a
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v2 05/12] usb: chipidea: add imx driver binding
  • From: Richard Zhao <linuxzsc@xxxxxxxxx>
• Re: [PATCH v2 05/12] usb: chipidea: add imx driver binding
  • From: Richard Zhao <linuxzsc@xxxxxxxxx>
• Re: [PATCH v2 02/12] usb: chipidea: permit driver bindings pass phy pointer
  • From: Richard Zhao <linuxzsc@xxxxxxxxx>
• [GIT PATCH] USB patches for 3.5-rc1 - try 2
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 05/12] usb: chipidea: add imx driver binding
  • From: Richard Zhao <linuxzsc@xxxxxxxxx>
• Re: [GIT PATCH] USB patches for 3.5-rc1
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] ammendement to commit aaa0ef289afe9186f81e2340114ea413eef0492a
  • From: Ricardo Martins <rasm@xxxxxxxx>
• Re: USB2.0 [EHCI] Issue : EHCI interrupt endpoints transfer is taking above 600 microsec on USB 2.0 host
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: use usb_serial_put in usb_serial_probe errors
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: USB2.0 [EHCI] Issue : EHCI interrupt endpoints transfer is taking above 600 microsec on USB 2.0 host
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb-core: Set intfdata to NULL if a driver's probe method failed
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 02/12] usb: chipidea: permit driver bindings pass phy pointer
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] usb: fix possible oops in serial option driver
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH v2 05/12] usb: chipidea: add imx driver binding
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] USB: DWC3: Fix missed isoc IN transaction
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH v2 05/12] usb: chipidea: add imx driver binding
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH] usb: fix possible oops in serial option driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [GIT PATCH] USB patches for 3.5-rc1
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/12] add imx usb driver for mx28/6x
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
• [PATCH] usb: use usb_serial_put in usb_serial_probe errors
  • From: Jan Safrata <jan.nikitenko@xxxxxxxxx>
• [PATCH] usb: fix possible oops in serial option driver
  • From: Jan Safrata <jan.nikitenko@xxxxxxxxx>
• Re: [PATCH] USB: DWC3: Fix missed isoc IN transaction
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH] USB: DWC3: Fix missed isoc IN transaction
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] USB: DWC3: Fix missed isoc IN transaction
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: Huawei E372 12d1:1506 reports itself as E398
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: Huawei E372 12d1:1506 reports itself as E398
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH v2 05/12] usb: chipidea: add imx driver binding
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• [PATCH] testusb: enable option "-l" in command line
  • From: "Du, ChangbinX" <changbinx.du@xxxxxxxxx>
• Re: [PATCH v2 05/12] usb: chipidea: add imx driver binding
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 05/12] usb: chipidea: add imx driver binding
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: Huawei E372 12d1:1506 reports itself as E398
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH v2 05/12] usb: chipidea: add imx driver binding
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 05/12] usb: chipidea: add imx driver binding
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 05/12] usb: chipidea: add imx driver binding
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/1] USB: Chipidea: Create a menu in Kconfig to choose driver bindings
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 02/12] usb: chipidea: permit driver bindings pass phy pointer
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 05/12] usb: chipidea: add imx driver binding
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• [PATCH 3/3] usb: chipidea: msm: add remove method
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/3] usb: chipidea: msm: add missing section annotation
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/3] usb: chipidea: drop useless arch-check
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/3] misc chipidea cleanups
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Huawei E372 12d1:1506 reports itself as E398
  • From: Martin Mokrejs <mmokrejs@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] USB: Chipidea: Create a menu in Kconfig to choose driver bindings
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH] usb-core: Set intfdata to NULL if a driver's probe method failed
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] usb-hid-core: Set intfdata to NULL if probe fails
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: About Data Aggregation with RNDIS and u_ether Driver
  • From: Mayank Rana <mrana@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] USB: Chipidea: Create a menu in Kconfig to choose driver bindings
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 0/3] scsi: usb-storage: hide errors for five devices
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] USB: Chipidea: Create a menu in Kconfig to choose driver bindings
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] USB: Chipidea: Create a menu in Kconfig to choose driver bindings
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 0/3] scsi: usb-storage: hide errors for five devices
  • From: Paul Bolle <pebolle@xxxxxxxxxx>
• Re: [PATCH 1/1] USB: Chipidea: Create a menu in Kconfig to choose driver bindings
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] USB: Chipidea: Create a menu in Kconfig to choose driver bindings
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/1] USB: Chipidea: Create a menu in Kconfig to choose driver bindings
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH] usb-hid-core: Set intfdata to NULL if probe fails
  • From: Jiri Slaby <jslaby@xxxxxxx>
• [PATCH v4] usb: gadget: mv: Add USB 3.0 device driver for Marvell PXA2128 chip.
  • From: Yu Xu <yuxu@xxxxxxxxxxx>
• Re: usb, davinci: usb 2.0 problem on an am1808 based board
  • From: Heiko Schocher <hs@xxxxxxx>
• Re: [PATCH 4/4] USB: Remove omap2 support from omap_udc.c
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/4] ARM: OMAP: Make FS USB omap1 only
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/4] ARM: OMAP2: Remove legacy USB FS support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/4] ARM: OMAP3: There is no FS USB controller on omap3
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v3] testusb: add path /dev/bus/usb to default search paths of usbfs
  • From: "Du, ChangbinX" <changbinx.du@xxxxxxxxx>
• Re: [PATCH v2 10/12] ARM: dts: imx6q-sabrelite: add usb devices
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [RFC PATCH 0/2] usb: multi-phy support
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH v2 08/12] ARM: imx6q: add usbphy clocks
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v2 10/12] ARM: dts: imx6q-sabrelite: add usb devices
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v2 10/12] ARM: dts: imx6q-sabrelite: add usb devices
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH 2/3 v6] arm: omap: am335x: enable phy controls
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH v2 08/12] ARM: imx6q: add usbphy clocks
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH v2 12/12] ARM: dts: imx28-evk: add usb devices
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 08/12] ARM: imx6q: add usbphy clocks
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios
  • From: Marek Vasut <marex@xxxxxxx>
• RE: [Resend PATCH v2] testusb: add path /dev/bus/usb to default search paths of usbfs
  • From: "Du, ChangbinX" <changbinx.du@xxxxxxxxx>
• Re: [PATCH v2 10/12] ARM: dts: imx6q-sabrelite: add usb devices
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH v2 00/12] add imx usb driver for mx28/6x
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v2 12/12] ARM: dts: imx28-evk: add usb devices
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v2 11/12] ARM: mxs: clk_register_clkdev mx28 usb clocks
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v2 08/12] ARM: imx6q: add usbphy clocks
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v2 06/12] ARM: imx6q: correct device name of usbphy and usb controller clock export
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v2 12/12] ARM: dts: imx28-evk: add usb devices
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH v2 05/12] usb: chipidea: add imx driver binding
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v2 11/12] ARM: mxs: clk_register_clkdev mx28 usb clocks
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH v2 08/12] ARM: imx6q: add usbphy clocks
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH v2 03/12] usb: ehci-hcd: notify phy when connect change
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v2 09/12] ARM: imx6q: disable usb charger detector
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v2 08/12] ARM: imx6q: add usbphy clocks
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 06/12] ARM: imx6q: correct device name of usbphy and usb controller clock export
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 05/12] usb: chipidea: add imx driver binding
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 03/12] usb: ehci-hcd: notify phy when connect change
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 02/12] usb: chipidea: permit driver bindings pass phy pointer
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios
  • From: Marek Vasut <marex@xxxxxxx>
• RE: [Resend PATCH v2] testusb: add path /dev/bus/usb to default search paths of usbfs
  • From: David Rientjes <rientjes@xxxxxxxxxx>
• Re: [PATCH v2 09/12] ARM: imx6q: disable usb charger detector
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• RE: [Resend PATCH v2] testusb: add path /dev/bus/usb to default search paths of usbfs
  • From: "Du, ChangbinX" <changbinx.du@xxxxxxxxx>
• Re: [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH v2 00/12] add imx usb driver for mx28/6x
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• RE: [PATCH 2/4] USB: Fix core compile with CONFIG_USB_SUSPEND=n
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: [PATCH v2 00/12] add imx usb driver for mx28/6x
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• RE: [PATCH v2 00/12] add imx usb driver for mx28/6x
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: [PATCH v2 00/12] add imx usb driver for mx28/6x
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [Resend PATCH v2] testusb: add path /dev/bus/usb to default search paths of usbfs
  • From: David Rientjes <rientjes@xxxxxxxxxx>
• RE: [PATCH v2 00/12] add imx usb driver for mx28/6x
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• [Resend PATCH v2] testusb: add path /dev/bus/usb to default search paths of usbfs
  • From: "Du, ChangbinX" <changbinx.du@xxxxxxxxx>
• Re: [PATCH v2 01/12] usb: otg: add notify_connect_change callback
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [GIT PULL] usb-gadget target merge for 3.5-rc1
  • From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] usb: otg: twl4030-usb: Don't power down phy when it is in-use by charger.
  • From: Andi Shyti <andi.shyti@xxxxxxxxx>
• Re: [PATCH 3/4] power_supply/MFD: twl4030_charger: Allow charger to control the regulator that feeds it.
  • From: Andi Shyti <andi.shyti@xxxxxxxxx>
• Re: [PATCH v2 00/12] add imx usb driver for mx28/6x
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 00/12] add imx usb driver for mx28/6x
  • From: Subodh Nijsure <snijsure@xxxxxxxxxxxx>
• Re: [PATCH v2 00/12] add imx usb driver for mx28/6x
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 00/12] add imx usb driver for mx28/6x
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• RE: [PATCH] USB: DWC3: Fix missed isoc IN transaction
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH v2 01/12] usb: otg: add notify_connect_change callback
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] USB: DWC3: Fix missed isoc IN transaction
  • From: Felipe Balbi <balbi@xxxxxx>