Linux LEDS Development

• Thread Index

• Re: [PATCH v6 2/2] leds: lp55xx: configure internal charge pump
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: ROHM BD2606MVV LED driver
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v6 2/2] leds: lp55xx: configure internal charge pump
  • From: Maarten Zanders <maarten.zanders@xxxxxxx>
• Re: [PATCH v8 4/6] leds: class: store the color index in struct led_classdev
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 6/6] leds: Add a multicolor LED driver to group monochromatic LEDs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH 0/2] leds: Add a driver for the BD2606MVV
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH 2/2] leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: leds: ROHM BD2606MVV LED driver
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [RESEND] leds: Ensure hardware blinking turns off when requested
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH] leds: Ensure hardware blinking turns off when requested
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: Ensure hardware blinking turns off when requested
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH] leds: tca6507: fix error handling of using fwnode_property_read_string
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v6 2/2] leds: lp55xx: configure internal charge pump
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 2/2] leds: max597x: Add support for max597x
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [net-next PATCH v6 16/16] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v6 16/16] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [net-next PATCH v6 16/16] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v6 16/16] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] leds: tca6507: fix error handling of using fwnode_property_read_string
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: tca6507: fix error handling of using fwnode_property_read_string
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH] leds: gpio: Configure per-LED pin control
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH] leds: tca6507: fix error handling of using fwnode_property_read_string
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [net-next PATCH v6 10/16] dt-bindings: leds: Document support for generic ethernet LEDs
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v6 2/2] leds: lp55xx: configure internal charge pump
  • From: Maarten Zanders <maarten.zanders@xxxxxxx>
• [PATCH v6 1/2] dt-bindings: leds-lp55xx: add ti,charge-pump-mode
  • From: Maarten Zanders <maarten.zanders@xxxxxxx>
• [PATCH v6 0/2] leds: lp55xx: configure internal charge pump
  • From: Maarten Zanders <maarten.zanders@xxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sm7225-fairphone-fp4: configure flash LED
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• [lee-leds:for-leds-next] BUILD SUCCESS 22dc3789b737fe29d8f54f0d084047aede5550ad
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: aw2013: Document vdd-supply
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: rgb: mt6370: fix CONFIG_LINEAR_RANGES select
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: aw2013: Document vdd-supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 0/3] Add support for high resolution PWMs
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: flash: set varaiables mvflash_3,4ch_regs storage-class-specifier to static
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: flash: qcom: Fix a signedness bug in qcom_flash_register_led_device()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: rgb: mt6370: correct config name to select in LEDS_MT6370_RGB
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: aw2013: Add vdd regulator
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: aw2013: Document vdd-supply
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Add entry for LED devices documentation
  • From: Lee Jones <lee@xxxxxxxxxx>
• [lee-leds:for-leds-next] BUILD SUCCESS a8fd44cbd283cb9825f9d799da14234148e5a4dd
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] leds: rgb: mt6370: fix CONFIG_LINEAR_RANGES select
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: aw2013: Add vddio regulator
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH v8 6/6] leds: Add a multicolor LED driver to group monochromatic LEDs
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v8 4/6] leds: class: store the color index in struct led_classdev
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v8 0/6] Add a multicolor LED driver for groups of monochromatic LEDs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v8 1/6] devres: provide devm_krealloc_array()
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v8 6/6] leds: Add a multicolor LED driver to group monochromatic LEDs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v8 4/6] leds: class: store the color index in struct led_classdev
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v8 5/6] dt-bindings: leds: Add binding for a multicolor group of LEDs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v8 2/6] leds: class: simplify the implementation of devm_of_led_get()
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v8 3/6] leds: provide devm_of_led_get_optional()
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 6/6] leds: Add a multicolor LED driver to group monochromatic LEDs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH] leds: rgb: mt6370: fix CONFIG_LINEAR_RANGES select
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [net-next PATCH v6 16/16] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v3 2/2] leds: max597x: Add support for max597x
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [net-next PATCH v6 16/16] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v8 1/2] leds: flash: add driver to support flash LED module in QCOM PMICs
  • From: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
• Re: [PATCH v8 1/2] leds: flash: add driver to support flash LED module in QCOM PMICs
  • From: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
• Re: [PATCH v18 1/3] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
• Re: [net-next PATCH v6 00/16] net: Add basic LED support for switch/phy
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: max597x: Add support for max597x
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: max597x: Add support for max597x
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: max597x: Add support for max597x
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• [net-next PATCH v6 16/16] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 15/16] dt-bindings: net: phy: Document support for LEDs node
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 14/16] ARM: dts: qcom: ipq8064-rb3011: Add Switch LED for each port
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 13/16] ARM: dts: qcom: ipq8064-rb3011: Drop unevaluated properties in switch nodes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 12/16] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 10/16] dt-bindings: leds: Document support for generic ethernet LEDs
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 11/16] dt-bindings: net: ethernet-controller: Document support for LEDs node
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 08/16] net: phy: phy_device: Call into the PHY driver to set LED blinking
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 09/16] net: phy: marvell: Implement led_blink_set()
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 07/16] net: phy: marvell: Add software control of the LEDs
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 05/16] net: phy: Add a binding for PHY LEDs
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 06/16] net: phy: phy_device: Call into the PHY driver to set LED brightness
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 04/16] leds: Provide stubs for when CLASS_LED & NEW_LEDS are disabled
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 03/16] net: dsa: qca8k: add LEDs blink_set() support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 02/16] net: dsa: qca8k: add LEDs basic support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 01/16] net: dsa: qca8k: move qca8k_port_to_phy() to header
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v6 00/16] net: Add basic LED support for switch/phy
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH 6/8] leds: tps68470: Support the WLED driver
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] leds: gpio: Configure per-LED pin control
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v18 1/3] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: Pavel Machek <pavel@xxxxxx>
• Re: kernel error at led trigger "phy0tpt"
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v8 1/2] leds: flash: add driver to support flash LED module in QCOM PMICs
  • From: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
• Re: kernel error at led trigger "phy0tpt"
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• Re: kernel error at led trigger "phy0tpt"
  • From: Tobias Dahms <dahms.tobias@xxxxxx>
• Re: [PATCH v8 1/2] leds: flash: add driver to support flash LED module in QCOM PMICs
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v8 1/2] leds: flash: add driver to support flash LED module in QCOM PMICs
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v8 1/2] leds: flash: add driver to support flash LED module in QCOM PMICs
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: bcm63138: refer to ARCH_BCMBCA instead of ARCH_BCM4908
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH] leds: bcm63138: refer to ARCH_BCMBCA instead of ARCH_BCM4908
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2] Add multicolor support to BlinkM LED driver
  • From: Joseph Strauss <jstrauss@xxxxxxxxxxx>
• Re: [PATCH v2] Add multicolor support to BlinkM LED driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [net-next PATCH v5 10/15] dt-bindings: net: ethernet-controller: Document support for LEDs node
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [net-next PATCH v5 10/15] dt-bindings: net: ethernet-controller: Document support for LEDs node
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: max597x: Add support for max597x
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: max597x: Add support for max597x
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: max597x: Add support for max597x
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 2/2] leds: max597x: Add support for max597x
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [net-next PATCH v5 12/15] arm: qcom: dt: Drop unevaluated properties in switch nodes for rb3011
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: aw2013: Add vddio regulator
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: max597x: Add support for max597x
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: sm7225-fairphone-fp4: configure flash LED
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [net-next PATCH v5 15/15] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 2/3] leds: rgb: leds-qcom-lpg: Add support for high resolution PWM
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: flash: set varaiables mvflash_3,4ch_regs storage-class-specifier to static
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v2 2/2] leds: max597x: Add support for max597x
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: aw2013: Add vddio regulator
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [net-next PATCH v5 15/15] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [net-next PATCH v5 15/15] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v3 15/38] leds: add HAS_IOPORT dependencies
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH 6/8] leds: tps68470: Support the WLED driver
  • From: Dan Scally <dan.scally@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 15/38] leds: add HAS_IOPORT dependencies
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 15/38] leds: add HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] Documentation: leds: MT6370: Use bullet lists for timing variables
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 2/3] Documentation: leds: MT6370: Properly wrap hw_pattern chart
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/3] Documentation: leds: Add MT6370 doc to the toctree
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 1/3] platform: x86: int3472: Add MFD cell for tps68470 LED
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 15/38] leds: add HAS_IOPORT dependencies
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 15/38] leds: add HAS_IOPORT dependencies
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH v3 15/38] leds: add HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [PATCH v3 15/38] leds: add HAS_IOPORT dependencies
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH v3 15/38] leds: add HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] leds: tps68470: Add LED control for tps68470
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 0/3] Documentation fixes for MT6370 RGB
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• Re: [PATCH v3 1/3] platform: x86: int3472: Add MFD cell for tps68470 LED
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 0/3] Documentation fixes for MT6370 RGB
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2] Add multicolor support to BlinkM LED driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 1/3] platform: x86: int3472: Add MFD cell for tps68470 LED
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [net-next PATCH v5 15/15] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [net-next PATCH v5 13/15] arm: qcom: dt: Add Switch LED for each port for rb3011
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [net-next PATCH v5 09/15] net: phy: marvell: Implement led_blink_set()
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [net-next PATCH v5 08/15] net: phy: phy_device: Call into the PHY driver to set LED blinking
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [net-next PATCH v5 07/15] net: phy: marvell: Add software control of the LEDs
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [net-next PATCH v5 03/15] net: dsa: qca8k: add LEDs blink_set() support
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: mt6360: Add missing fwnode_handle_put()
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: flash: qcom: Fix a signedness bug in qcom_flash_register_led_device()
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/2] leds: max597x: Add support for max597x
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 2/2] leds: max597x: Add support for max597x
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH RESEND v2] led: multicolor: Fix intensity setting while SW blinking
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v3 3/3] leds: tps68470: Add LED control for tps68470
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2] Add multicolor support to BlinkM LED driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v3 3/3] leds: tps68470: Add LED control for tps68470
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 3/3] leds: tps68470: Add LED control for tps68470
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 3/3] leds: tps68470: Add LED control for tps68470
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v3 3/3] leds: tps68470: Add LED control for tps68470
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 6/8] leds: tps68470: Support the WLED driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 8/8] platform/x86: int3472: Define LED lookup data for MS Surface Go
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 3/3] leds: tps68470: Add LED control for tps68470
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 0/3] Documentation fixes for MT6370 RGB
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: rgb: mt6370: correct config name to select in LEDS_MT6370_RGB
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH] leds: rgb: mt6370: correct config name to select in LEDS_MT6370_RGB
  • From: Lukas Bulwahn <lukas.bulwahn@xxxxxxxxx>
• Re: [PATCH 8/8] platform/x86: int3472: Define LED lookup data for MS Surface Go
  • From: Dan Scally <dan.scally@xxxxxxxxxxxxxxxx>
• Re: [PATCH 5/8] leds: tps68470: Refactor tps68470_brightness_get()
  • From: Dan Scally <dan.scally@xxxxxxxxxxxxxxxx>
• Re: [PATCH 5/8] leds: tps68470: Refactor tps68470_brightness_get()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 5/8] leds: tps68470: Refactor tps68470_brightness_get()
  • From: Dan Scally <dan.scally@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] leds: tps68470: Add LED control for tps68470
  • From: Dan Scally <dan.scally@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] Documentation fixes for MT6370 RGB
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• [lee-leds:for-leds-next] BUILD SUCCESS 8faac9aba0d89d99608396fd8f6e049a545bfcf9
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] Add multicolor support to BlinkM LED driver
  • From: Joseph Strauss <jstrauss@xxxxxxxxxxx>
• Re: [PATCH 0/8] Add WLED support to TPS68470 LED driver
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 8/8] platform/x86: int3472: Define LED lookup data for MS Surface Go
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 7/8] platform/x86: int3472: Support LED lookups in board data
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH RESEND v2] led: multicolor: Fix intensity setting while SW blinking
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 6/8] leds: tps68470: Support the WLED driver
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 2/8] platform/x86: int3472: Init LED registers using platform data
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 5/8] leds: tps68470: Refactor tps68470_brightness_get()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 4/8] platform/x86: int3472: Add tps68470-led as clock consumer
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 3/8] platform/x86: int3472: Add TPS68470 LED Board Data
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 1/8] platform/x86: int3472: Add platform data for LEDs
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: max597x: Add support for max597x
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 3/3] leds: tps68470: Add LED control for tps68470
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 1/3] platform: x86: int3472: Add MFD cell for tps68470 LED
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 8/8] platform/x86: int3472: Define LED lookup data for MS Surface Go
  • From: Daniel Scally <dan.scally@xxxxxxxxxxxxxxxx>
• [PATCH 7/8] platform/x86: int3472: Support LED lookups in board data
  • From: Daniel Scally <dan.scally@xxxxxxxxxxxxxxxx>
• [PATCH 6/8] leds: tps68470: Support the WLED driver
  • From: Daniel Scally <dan.scally@xxxxxxxxxxxxxxxx>
• [PATCH 5/8] leds: tps68470: Refactor tps68470_brightness_get()
  • From: Daniel Scally <dan.scally@xxxxxxxxxxxxxxxx>
• [PATCH 4/8] platform/x86: int3472: Add tps68470-led as clock consumer
  • From: Daniel Scally <dan.scally@xxxxxxxxxxxxxxxx>
• [PATCH 2/8] platform/x86: int3472: Init LED registers using platform data
  • From: Daniel Scally <dan.scally@xxxxxxxxxxxxxxxx>
• [PATCH 3/8] platform/x86: int3472: Add TPS68470 LED Board Data
  • From: Daniel Scally <dan.scally@xxxxxxxxxxxxxxxx>
• [PATCH 0/8] Add WLED support to TPS68470 LED driver
  • From: Daniel Scally <dan.scally@xxxxxxxxxxxxxxxx>
• [PATCH 1/8] platform/x86: int3472: Add platform data for LEDs
  • From: Daniel Scally <dan.scally@xxxxxxxxxxxxxxxx>
• Re: [PATCH] leds: rgb: mt6370: Fix implicit declaration for FIELD_GET
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH 2/2] leds: max597x: Add support for max597x
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• [PATCH] leds: flash: qcom: Fix a signedness bug in qcom_flash_register_led_device()
  • From: Dan Carpenter <error27@xxxxxxxxx>
• [PATCH] leds: mt6360: Add missing fwnode_handle_put()
  • From: Liang He <windhl@xxxxxxx>
• Re: [net-next PATCH v5 10/15] dt-bindings: net: ethernet-controller: Document support for LEDs node
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v5 10/15] dt-bindings: net: ethernet-controller: Document support for LEDs node
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v5 10/15] dt-bindings: net: ethernet-controller: Document support for LEDs node
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: leds: aw2013: Document vddio-supply
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [net-next PATCH v5 14/15] dt-bindings: net: phy: Document support for LEDs node
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [net-next PATCH v5 11/15] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [net-next PATCH v5 10/15] dt-bindings: net: ethernet-controller: Document support for LEDs node
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: kernel error at led trigger "phy0tpt"
  • From: Tobias Dahms <dahms.tobias@xxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: leds: aw2013: Document vddio-supply
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [net-next PATCH v5 04/15] leds: Provide stubs for when CLASS_LED is disabled
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v5 04/15] leds: Provide stubs for when CLASS_LED is disabled
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v5 04/15] leds: Provide stubs for when CLASS_LED is disabled
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v3 2/3] include: mfd: tps68470: Add masks for LEDA and LEDB
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• [PATCH v3 3/3] leds: tps68470: Add LED control for tps68470
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• [PATCH v3 1/3] platform: x86: int3472: Add MFD cell for tps68470 LED
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• [PATCH v3 0/3] leds: tps68470: LED driver for TPS68470
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• Re: [net-next PATCH v5 04/15] leds: Provide stubs for when CLASS_LED is disabled
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: kernel error at led trigger "phy0tpt"
  • From: "Linux regression tracking (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] leds: tps68470: Add LED control for tps68470
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: leds: aw2013: Document vddio-supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• kernel error at led trigger "phy0tpt"
  • From: Tobias Dahms <dahms.tobias@xxxxxx>
• Re: [net-next PATCH v5 04/15] leds: Provide stubs for when CLASS_LED is disabled
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: leds: aw2013: Document vddio-supply
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [net-next PATCH v5 02/15] net: dsa: qca8k: add LEDs basic support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: leds: aw2013: Document vddio-supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: leds: aw2013: Document vddio-supply
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] leds: aw2013: Add vddio regulator
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] leds: aw2013: Add vddio regulator
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• Re: [net-next PATCH v5 04/15] leds: Provide stubs for when CLASS_LED is disabled
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v5 02/15] net: dsa: qca8k: add LEDs basic support
  • From: Michal Kubiak <michal.kubiak@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: aw2013: Document vdd-supply
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [net-next PATCH v5 06/15] net: phy: phy_device: Call into the PHY driver to set LED brightness
  • From: Michal Kubiak <michal.kubiak@xxxxxxxxx>
• Re: [net-next PATCH v5 05/15] net: phy: Add a binding for PHY LEDs
  • From: Michal Kubiak <michal.kubiak@xxxxxxxxx>
• Re: [net-next PATCH v5 01/15] net: dsa: qca8k: move qca8k_port_to_phy() to header
  • From: Michal Kubiak <michal.kubiak@xxxxxxxxx>
• Re: [net-next PATCH v5 02/15] net: dsa: qca8k: add LEDs basic support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v5 02/15] net: dsa: qca8k: add LEDs basic support
  • From: Michal Kubiak <michal.kubiak@xxxxxxxxx>
• Re: [PATCH v2 3/4] leds: tps68470: Add LED control for tps68470
  • From: Dan Scally <dan.scally@xxxxxxxxxxxxxxxx>
• [PATCH 2/2] leds: aw2013: Add vdd regulator
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: leds: aw2013: Document vdd-supply
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• [PATCH 0/2] leds: aw2013: Add vdd regulator
  • From: "Lin, Meng-Bo" <linmengbo0689@xxxxxxxxxxxxxx>
• Re: [PATCH 10/27] leds: remove MODULE_LICENSE in non-modules
  • From: Nick Alcock <nick.alcock@xxxxxxxxxx>
• Re: [net-next PATCH v5 04/15] leds: Provide stubs for when CLASS_LED is disabled
  • From: Andrew Lunn <andrew@xxxxxxx>
• [net-next PATCH v5 15/15] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 13/15] arm: qcom: dt: Add Switch LED for each port for rb3011
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 12/15] arm: qcom: dt: Drop unevaluated properties in switch nodes for rb3011
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 14/15] dt-bindings: net: phy: Document support for LEDs node
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 09/15] net: phy: marvell: Implement led_blink_set()
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 11/15] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 06/15] net: phy: phy_device: Call into the PHY driver to set LED brightness
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 08/15] net: phy: phy_device: Call into the PHY driver to set LED blinking
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 07/15] net: phy: marvell: Add software control of the LEDs
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 10/15] dt-bindings: net: ethernet-controller: Document support for LEDs node
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 05/15] net: phy: Add a binding for PHY LEDs
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 04/15] leds: Provide stubs for when CLASS_LED is disabled
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 03/15] net: dsa: qca8k: add LEDs blink_set() support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 02/15] net: dsa: qca8k: add LEDs basic support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 01/15] net: dsa: qca8k: move qca8k_port_to_phy() to header
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 00/15] net: Add basic LED support for switch/phy
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Add entry for LED devices documentation
  • From: Pavel Machek <pavel@xxxxxx>
• [lee-leds:for-leds-next 13/15] drivers/leds/rgb/leds-mt6370-rgb.c:889:8: error: call to undeclared function 'FIELD_GET'; ISO C99 and later do not support implicit function declarations
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] MAINTAINERS: Add entry for LED devices documentation
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• [PATCH 0/3] Documentation fixes for MT6370 RGB
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• [PATCH 3/3] Documentation: leds: MT6370: Use bullet lists for timing variables
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• [PATCH 1/3] Documentation: leds: Add MT6370 doc to the toctree
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• [PATCH 2/3] Documentation: leds: MT6370: Properly wrap hw_pattern chart
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• Re: [net-next PATCH v4 03/14] net: dsa: qca8k: add LEDs blink_set() support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v4 02/14] net: dsa: qca8k: add LEDs basic support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [lee-leds:for-leds-next 15/15] htmldocs: Documentation/leds/leds-mt6370-rgb.rst:39: WARNING: Literal block ends without a blank line; unexpected unindent.
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [net-next PATCH v3 09/14] dt-bindings: net: dsa: dsa-port: Document support for LEDs node
  • From: Rob Herring <robh@xxxxxxxxxx>
• [lee-leds:for-leds-next] BUILD REGRESSION 4ba9df04b7ac66d2d000ed7ae2d8136302d99a57
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] leds: flash: set varaiables mvflash_3,4ch_regs storage-class-specifier to static
  • From: Tom Rix <trix@xxxxxxxxxx>
• Re: [net-next PATCH v4 02/14] net: dsa: qca8k: add LEDs basic support
  • From: Michal Kubiak <michal.kubiak@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: leds-qcom-lpg: Add qcom,pmk8550-pwm compatible string
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [net-next PATCH v4 10/14] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 2/3] leds: rgb: leds-qcom-lpg: Add support for high resolution PWM
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] leds: rgb: mt6370: Fix implicit declaration for FIELD_GET
  • From: <cy_huang@xxxxxxxxxxx>
• Re: [net-next PATCH v4 04/14] net: phy: Add a binding for PHY LEDs
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v4 04/14] net: phy: Add a binding for PHY LEDs
  • From: Michal Kubiak <michal.kubiak@xxxxxxxxx>
• Re: [net-next PATCH v4 04/14] net: phy: Add a binding for PHY LEDs
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [net-next PATCH v4 10/14] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v4 10/14] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v4 04/14] net: phy: Add a binding for PHY LEDs
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v4 03/14] net: dsa: qca8k: add LEDs blink_set() support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v4 02/14] net: dsa: qca8k: add LEDs basic support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v4 05/14] net: phy: phy_device: Call into the PHY driver to set LED brightness
  • From: Michal Kubiak <michal.kubiak@xxxxxxxxx>
• Re: [net-next PATCH v4 04/14] net: phy: Add a binding for PHY LEDs
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v4 04/14] net: phy: Add a binding for PHY LEDs
  • From: Michal Kubiak <michal.kubiak@xxxxxxxxx>
• Re: [net-next PATCH v4 02/14] net: dsa: qca8k: add LEDs basic support
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v4 03/14] net: dsa: qca8k: add LEDs blink_set() support
  • From: Michal Kubiak <michal.kubiak@xxxxxxxxx>
• Re: [net-next PATCH v4 02/14] net: dsa: qca8k: add LEDs basic support
  • From: Michal Kubiak <michal.kubiak@xxxxxxxxx>
• Re: [PATCH 2/3] leds: rgb: leds-qcom-lpg: Add support for high resolution PWM
  • From: kernel test robot <lkp@xxxxxxxxx>
• [lee-leds:for-leds-next 13/15] drivers/leds/rgb/leds-mt6370-rgb.c:889:15: error: implicit declaration of function 'FIELD_GET'
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [net-next PATCH v4 10/14] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: leds: add binding for aw200xx
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v18 3/3] docs: leds: Add MT6370 RGB LED pattern document
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v18 2/3] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v18 2/3] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: leds: spmi-flash-led: Add pm6150l compatible
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: leds: spmi-flash-led: Add pm6150l compatible
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v18 1/3] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [net-next PATCH v4 04/14] net: phy: Add a binding for PHY LEDs
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [lee-leds:for-leds-next] BUILD SUCCESS 1aeff621689120db60cb7029e5a0fde7d01f7fb6
  • From: kernel test robot <lkp@xxxxxxxxx>
• [net-next PATCH v4 14/14] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v4 13/14] dt-bindings: net: phy: Document support for LEDs node
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v4 12/14] arm: qcom: dt: Add Switch LED for each port for rb3011
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v4 11/14] arm: qcom: dt: Drop unevaluated properties in switch nodes for rb3011
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v4 08/14] net: phy: marvell: Implement led_blink_set()
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v4 10/14] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v4 09/14] dt-bindings: net: ethernet-controller: Document support for LEDs node
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v4 05/14] net: phy: phy_device: Call into the PHY driver to set LED brightness
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v4 06/14] net: phy: marvell: Add software control of the LEDs
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v4 04/14] net: phy: Add a binding for PHY LEDs
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v4 07/14] net: phy: phy_device: Call into the PHY driver to set LED blinking
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v4 01/14] net: dsa: qca8k: move qca8k_port_to_phy() to header
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v4 03/14] net: dsa: qca8k: add LEDs blink_set() support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v4 02/14] net: dsa: qca8k: add LEDs basic support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v4 00/14] net: Add basic LED support for switch/phy
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v18 3/3] docs: leds: Add MT6370 RGB LED pattern document
  • From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
• Re: [net-next PATCH 01/11] net: dsa: qca8k: add LEDs basic support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: leds: add binding for aw200xx
  • From: Martin Kurbanov <mmkurbanov@xxxxxxxxxxxxxx>
• [PATCH 3/3] leds: rgb: leds-qcom-lpg: Add support for PMK8550 PWM
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 2/3] leds: rgb: leds-qcom-lpg: Add support for high resolution PWM
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 0/3] Add support for high resolution PWMs
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: leds-qcom-lpg: Add qcom,pmk8550-pwm compatible string
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: leds: add binding for aw200xx
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 15/38] leds: add HAS_IOPORT dependencies
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v18 3/3] docs: leds: Add MT6370 RGB LED pattern document
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH V2 REBASED] dt-bindings: leds: add "usbport" trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH V2 REBASED] dt-bindings: leds: add "usbport" trigger
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH V2] dt-bindings: leds: add "usbport" trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [RESEND PATCH v7 2/5] leds: sun50i-a100: New driver for the A100 LED controller
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: leds: add binding for aw200xx
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH RESEND] leds: qcom-lpg: Release node reference before returning
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v8 2/2] dt-bindings: leds: add QCOM flash LED controller
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v8 1/2] leds: flash: add driver to support flash LED module in QCOM PMICs
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2] Add multicolor support to BlinkM LED driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v7 0/6] Add a multicolor LED driver for groups of monochromatic LEDs
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v7 6/6] leds: Add a multicolor LED driver to group monochromatic LEDs
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2] leds: Mark GPIO LED trigger broken
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 2/2] leds: add aw20xx driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [net-next PATCH v3 09/14] dt-bindings: net: dsa: dsa-port: Document support for LEDs node
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v3 09/14] dt-bindings: net: dsa: dsa-port: Document support for LEDs node
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v3 06/14] net: phy: marvell: Add software control of the LEDs
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v3 10/14] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [net-next PATCH v3 09/14] dt-bindings: net: dsa: dsa-port: Document support for LEDs node
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [net-next PATCH v3 08/14] net: phy: marvell: Implement led_blink_set()
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [net-next PATCH v3 06/14] net: phy: marvell: Add software control of the LEDs
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [net-next PATCH v3 04/14] net: phy: Add a binding for PHY LEDs
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [net-next PATCH v3 02/14] net: dsa: qca8k: add LEDs basic support
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2] leds: Mark GPIO LED trigger broken
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] leds: Delete GPIO LED trigger
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] leds: Delete GPIO LED trigger
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v3 2/2] leds: add aw20xx driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/2] leds: add aw20xx driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/2] leds: add aw20xx driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [net-next PATCH v3 14/14] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v3 09/14] dt-bindings: net: dsa: dsa-port: Document support for LEDs node
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v3 05/14] net: phy: phy_device: Call into the PHY driver to set LED brightness.
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v3 13/14] dt-bindings: net: phy: Document support for LEDs node
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v3 10/14] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v3 06/14] net: phy: marvell: Add software control of the LEDs
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v3 11/14] arm: qcom: dt: Drop unevaluated properties in switch nodes for rb3011
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v3 07/14] net: phy: phy_device: Call into the PHY driver to set LED blinking.
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v3 08/14] net: phy: marvell: Implement led_blink_set()
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v3 12/14] arm: qcom: dt: Add Switch LED for each port for rb3011
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v3 03/14] net: dsa: qca8k: add LEDs blink_set() support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v3 01/14] net: dsa: qca8k: move qca8k_port_to_phy() to header
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v3 02/14] net: dsa: qca8k: add LEDs basic support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v3 04/14] net: phy: Add a binding for PHY LEDs
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v3 00/14] net: Add basic LED support for switch/phy
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v3 0/2] leds: add aw20xx driver
  • From: Martin Kurbanov <mmkurbanov@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: leds: add binding for aw200xx
  • From: Martin Kurbanov <mmkurbanov@xxxxxxxxxxxxxx>
• [PATCH v3 15/38] leds: add HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] leds: add aw20xx driver
  • From: Martin Kurbanov <mmkurbanov@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] leds: add aw20xx driver
  • From: Martin Kurbanov <mmkurbanov@xxxxxxxxxxxxxx>
• [PATCH] leds: Delete GPIO LED trigger
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [lee-leds:for-leds-next] BUILD SUCCESS faa7f34a47f057dee571861eccadfe81834dde6c
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] leds: tlc591xx: Mark OF related data as maybe unused
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v8 00/13] Adds support for PHY LEDs with offload triggers
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH v2 3/4] leds: tps68470: Add LED control for tps68470
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• Re: [PATCH] leds: tlc591xx: Mark OF related data as maybe unused
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: tlc591xx: Mark OF related data as maybe unused
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] leds: tlc591xx: Mark OF related data as maybe unused
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH] leds: tlc591xx: Mark OF related data as maybe unused
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v8 00/13] Adds support for PHY LEDs with offload triggers
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 4/4] platform: x86: int3472: Register a LED lookup table entry for the privacy LED
  • From: Dan Scally <dan.scally@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] platform: x86: int3472: Add MFD cell for tps68470 LED
  • From: Dan Scally <dan.scally@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] leds: tps68470: Add LED control for tps68470
  • From: Dan Scally <dan.scally@xxxxxxxxxxxxxxxx>
• [PATCH v2 4/4] platform: x86: int3472: Register a LED lookup table entry for the privacy LED
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• [PATCH v2 3/4] leds: tps68470: Add LED control for tps68470
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• [PATCH v2 2/4] include: mfd: tps68470: Add masks for LEDA and LEDB
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• [PATCH v2 0/4] leds: tps68470: LED driver for TPS68470
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• [PATCH v2 1/4] platform: x86: int3472: Add MFD cell for tps68470 LED
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• Re: [PATCH v8 00/13] Adds support for PHY LEDs with offload triggers
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v18 1/3] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>
• [PATCH v18 2/3] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>
• [PATCH v18 0/3] Add MediaTek MT6370 PMIC support
  • From: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>
• [PATCH v18 3/3] docs: leds: Add MT6370 RGB LED pattern document
  • From: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>
• Re: [net-next PATCH v2 02/14] net: dsa: qca8k: add LEDs basic support
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v2 02/14] net: dsa: qca8k: add LEDs basic support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v2 02/14] net: dsa: qca8k: add LEDs basic support
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v2 01/14] net: dsa: qca8k: move qca8k_port_to_phy() to header
  • From: Andrew Lunn <andrew@xxxxxxx>
• [net-next PATCH v2 12/14] arm: qcom: dt: Add Switch LED for each port for rb3011
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v2 13/14] dt-bindings: net: phy: Document support for LEDs node
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v2 14/14] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v2 11/14] arm: qcom: dt: Drop unevaluated properties in switch nodes for rb3011
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v2 10/14] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v2 09/14] dt-bindings: net: dsa: dsa-port: Document support for LEDs node
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v2 08/14] net: phy: marvell: Implement led_blink_set()
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v2 07/14] net: phy: phy_device: Call into the PHY driver to set LED blinking.
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v2 05/14] net: phy: phy_device: Call into the PHY driver to set LED brightness.
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v2 03/14] net: dsa: qca8k: add LEDs blink_set() support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v2 04/14] net: phy: Add a binding for PHY LEDs
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v2 02/14] net: dsa: qca8k: add LEDs basic support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v2 06/14] net: phy: marvell: Add software control of the LEDs
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v2 01/14] net: dsa: qca8k: move qca8k_port_to_phy() to header
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v2 00/14] net: Add basic LED support for switch/phy
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v17 RESEND 2/3] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v8 00/13] Adds support for PHY LEDs with offload triggers
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v8 00/13] Adds support for PHY LEDs with offload triggers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v8 00/13] Adds support for PHY LEDs with offload triggers
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v17 RESEND 2/3] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
• Re: [net-next PATCH 09/11] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH 09/11] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH 09/11] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [net-next PATCH 10/11] dt-bindings: net: phy: Document support for LEDs node
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH 09/11] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH 08/11] dt-bindings: net: dsa: dsa-port: Document support for LEDs node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [net-next PATCH 10/11] dt-bindings: net: phy: Document support for LEDs node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [net-next PATCH 10/11] dt-bindings: net: phy: Document support for LEDs node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [net-next PATCH 09/11] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 00/13] Adds support for PHY LEDs with offload triggers
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v17 RESEND 1/3] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [net-next PATCH 09/11] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v17 RESEND 2/3] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v17 RESEND 3/3] docs: leds: Add MT6370 RGB LED pattern document
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [net-next PATCH 10/11] dt-bindings: net: phy: Document support for LEDs node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [net-next PATCH 09/11] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] leds: bcm63138: refer to ARCH_BCMBCA instead of ARCH_BCM4908
  • From: Rafał Miłecki <rafal@xxxxxxxxxx>
• [PATCH V2] dt-bindings: leds: add "usbport" trigger
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [RESEND PATCH v7 0/5] leds: Allwinner A100 LED controller support
  • From: Guo Ren <guoren@xxxxxxxxxx>
• Re: [net-next PATCH 00/11] net: Add basic LED support for switch/phy
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH 01/11] net: dsa: qca8k: add LEDs basic support
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH 10/11] dt-bindings: net: phy: Document support for LEDs node
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH 08/11] dt-bindings: net: dsa: dsa-port: Document support for LEDs node
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH 01/11] net: dsa: qca8k: add LEDs basic support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH 03/11] net: phy: Add a binding for PHY LEDs
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH 01/11] net: dsa: qca8k: add LEDs basic support
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH] leds: bcm63138: refer to ARCH_BCMBCA instead of ARCH_BCM4908
  • From: William Zhang <william.zhang@xxxxxxxxxxxx>
• Re: [PATCH] leds: bcm63138: refer to ARCH_BCMBCA instead of ARCH_BCM4908
  • From: William Zhang <william.zhang@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: add "usbport" trigger
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [net-next PATCH 11/11] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH 03/11] net: phy: Add a binding for PHY LEDs
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH 01/11] net: dsa: qca8k: add LEDs basic support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH 11/11] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH 03/11] net: phy: Add a binding for PHY LEDs
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH 02/11] net: dsa: qca8k: add LEDs blink_set() support
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH 01/11] net: dsa: qca8k: add LEDs basic support
  • From: Andrew Lunn <andrew@xxxxxxx>
• [net-next PATCH 11/11] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH 09/11] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH 07/11] net: phy: marvell: Implement led_blink_set()
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH 10/11] dt-bindings: net: phy: Document support for LEDs node
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH 08/11] dt-bindings: net: dsa: dsa-port: Document support for LEDs node
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH 06/11] net: phy: phy_device: Call into the PHY driver to set LED blinking.
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH 05/11] net: phy: marvell: Add software control of the LEDs
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH 04/11] net: phy: phy_device: Call into the PHY driver to set LED brightness.
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH 03/11] net: phy: Add a binding for PHY LEDs
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH 02/11] net: dsa: qca8k: add LEDs blink_set() support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH 01/11] net: dsa: qca8k: add LEDs basic support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH 00/11] net: Add basic LED support for switch/phy
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [RESEND PATCH v7 0/5] leds: Allwinner A100 LED controller support
  • From: Palmer Dabbelt <palmer@xxxxxxxxxxx>
• Re: [PATCH] leds: bcm63138: refer to ARCH_BCMBCA instead of ARCH_BCM4908
  • From: Rafał Miłecki <rafal@xxxxxxxxxx>
• [PATCH] leds: bcm63138: refer to ARCH_BCMBCA instead of ARCH_BCM4908
  • From: Lukas Bulwahn <lukas.bulwahn@xxxxxxxxx>
• Re: [PATCH v17 RESEND 3/3] docs: leds: Add MT6370 RGB LED pattern document
  • From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
• Re: [PATCH v17 RESEND 2/3] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
• Re: [PATCH v17 RESEND 1/3] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
• Re: [PATCH v8 00/13] Adds support for PHY LEDs with offload triggers
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v4 11/11] net: dsa: hellcreek: Get rid of custom led_init_default_state_get()
  • From: Kurt Kanzenbach <kurt@xxxxxxxxxxxxx>
• Re: [PATCH v4 11/11] net: dsa: hellcreek: Get rid of custom led_init_default_state_get()
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH v4 11/11] net: dsa: hellcreek: Get rid of custom led_init_default_state_get()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 2/2] trigger: ledtrig-tty: add additional modes
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH v7 2/2] trigger: ledtrig-tty: add additional modes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v8 0/3] leds: ledtrig-tty: add tty_led_mode xtension
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH v8 0/3] leds: ledtrig-tty: add tty_led_mode xtension
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• [PATCH v8 2/3] trigger: ledtrig-tty: add additional modes
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v8 0/3] leds: ledtrig-tty: add tty_led_mode xtension
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v8 1/3] tty: new helper function tty_get_mget
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v8 3/3] ledtrig-tty: call correct brightness set function
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH v7 2/2] trigger: ledtrig-tty: add additional modes
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v7 2/2] trigger: ledtrig-tty: add additional modes
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v7 2/2] trigger: ledtrig-tty: add additional modes
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v7 2/2] trigger: ledtrig-tty: add additional modes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples
  • From: Robin van der Gracht <robin@xxxxxxxxxxx>
• Re: [PATCH v7 2/2] trigger: ledtrig-tty: add additional modes
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH v7 2/2] trigger: ledtrig-tty: add additional modes
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: [PATCH v17 RESEND 3/3] docs: leds: Add MT6370 RGB LED pattern document
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v17 RESEND 2/3] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v17 RESEND 1/3] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 0/3] leds: turris-omnia: updates
  • From: Josef Schlehofer <josef.schlehofer@xxxxxx>
• [lee-leds:for-leds-next] BUILD SUCCESS 140d9006dd017fd9ea7c2d721d68ec3c83e2254e
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v7 2/2] trigger: ledtrig-tty: add additional modes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v7] dt-bindings: leds: Document commonly used LED triggers
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v6] dt-bindings: leds: Document commonly used LED triggers
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v7] dt-bindings: leds: Document commonly used LED triggers
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v5] dt-bindings: leds: Document commonly used LED triggers
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: Fix reference to led_set_brightness() in doc
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v6] dt-bindings: leds: Document commonly used LED triggers
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 10/27] leds: remove MODULE_LICENSE in non-modules
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v6] dt-bindings: leds: Document commonly used LED triggers
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v1 2/2] leds: lp8860: Remove duplicate NULL checks
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v1 1/2] leds: lp8860: Remove unused of_gpio,h
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v5 2/2] leds: lp55xx: configure internal charge pump
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v8 2/2] dt-bindings: leds: add QCOM flash LED controller
  • From: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
• [PATCH v8 1/2] leds: flash: add driver to support flash LED module in QCOM PMICs
  • From: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
• Re: [PATCH] leds: qcom-lpg: Release node reference before returning
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: leds: add binding for aw200xx
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/3] leds: simatic-ipc-leds-gpio: split up into multiple drivers
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] leds: simatic-ipc-leds-gpio: split up into multiple drivers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v13 0/2] Introduce block device LED trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: leds: add binding for aw200xx
  • From: Martin Kurbanov <mmkurbanov@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] leds: simatic-ipc-leds-gpio: split up into multiple drivers
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] leds: simatic-ipc-leds-gpio: split up into multiple drivers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: add aw20xx driver
  • From: Martin Kurbanov <mmkurbanov@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] leds: simatic-ipc-leds-gpio: split up
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] leds: simatic-ipc-leds-gpio: introduce more Kconfig switches
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] leds: simatic-ipc-leds-gpio: introduce more Kconfig switches
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 3/3] leds: simatic-ipc-leds-gpio: introduce more Kconfig switches
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] leds: simatic-ipc-leds-gpio: split up into multiple drivers
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [RESEND PATCH 3/3] leds: tps68470: Add LED control for tps68470
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• Re: [PATCH v2 1/3] leds: simatic-ipc-leds-gpio: move two extra gpio pins into another table
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] leds: simatic-ipc-leds-gpio: introduce more Kconfig switches
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: leds: add binding for aw200xx
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v7 1/2] leds: flash: add driver to support flash LED module in QCOM PMICs
  • From: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] leds: simatic-ipc-leds-gpio: introduce more Kconfig switches
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v13 0/2] Introduce block device LED trigger
  • From: Ian Pilcher <arequipeno@xxxxxxxxx>
• Re: [PATCH v2 0/3] leds: simatic-ipc-leds-gpio: split up
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] leds: simatic-ipc-leds-gpio: introduce more Kconfig switches
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] leds: simatic-ipc-leds-gpio: split up into multiple drivers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] leds: simatic-ipc-leds-gpio: move two extra gpio pins into another table
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 3/3] leds: simatic-ipc-leds-gpio: introduce more Kconfig switches
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v2 2/3] leds: simatic-ipc-leds-gpio: split up into multiple drivers
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v2 0/3] leds: simatic-ipc-leds-gpio: split up
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v2 1/3] leds: simatic-ipc-leds-gpio: move two extra gpio pins into another table
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH 2/3] leds: simatic-ipc-leds-gpio: split up into multiple drivers
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH 2/3] leds: simatic-ipc-leds-gpio: split up into multiple drivers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] leds: simatic-ipc-leds-gpio: split up into multiple drivers
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v7 1/2] leds: flash: add driver to support flash LED module in QCOM PMICs
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 2/3] leds: simatic-ipc-leds-gpio: split up into multiple drivers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples
  • From: Simon Glass <sjg@xxxxxxxxxxxx>
• Re: [RESEND PATCH v7 2/5] leds: sun50i-a100: New driver for the A100 LED controller
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v13 0/2] Introduce block device LED trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2] Add multicolor support to BlinkM LED driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 4/8] leds: TI_LMU_COMMON: select REGMAP instead of depending on it
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: add aw20xx driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: add "usbport" trigger
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH v2 2/2] leds: add aw20xx driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: add "usbport" trigger
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/8] drivers: select REGMAP instead of depending on it
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [RESEND PATCH 3/3] leds: tps68470: Add LED control for tps68470
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: add aw20xx driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/2] leds: add aw20xx driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: AUXdisplay for LED arrays, keyboards with per-key LEDs -- was Re: [PATCH v2 2/2] leds: add aw20xx driver
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: add aw20xx driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: add "usbport" trigger
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: add aw20xx driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: add "usbport" trigger
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] leds: gpio: Configure per-LED pin control
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: add aw20xx driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• AUXdisplay for LED arrays, keyboards with per-key LEDs -- was Re: [PATCH v2 2/2] leds: add aw20xx driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 2/2] leds: add aw20xx driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] dt-bindings: leds: add "usbport" trigger
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v2 0/2] leds: add aw20xx driver
  • From: Martin Kurbanov <mmkurbanov@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] leds: add aw20xx driver
  • From: Martin Kurbanov <mmkurbanov@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: leds: add binding for aw200xx
  • From: Martin Kurbanov <mmkurbanov@xxxxxxxxxxxxxx>
• [PATCH] dt-bindings: leds: add "usbport" trigger
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH 0/8] drivers: select REGMAP instead of depending on it
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH 4/8] leds: TI_LMU_COMMON: select REGMAP instead of depending on it
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 0/8] drivers: select REGMAP instead of depending on it
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 0/8] drivers: select REGMAP instead of depending on it
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 4/8] leds: TI_LMU_COMMON: select REGMAP instead of depending on it
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH] platform: x86: int3472: Register a LED lookup table entry for the privacy LED
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] platform: x86: int3472: Register a LED lookup table entry for the privacy LED
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [RESEND PATCH 3/3] leds: tps68470: Add LED control for tps68470
  • From: Dan Scally <dan.scally@xxxxxxxxxxxxxxxx>
• [PATCH 10/27] leds: remove MODULE_LICENSE in non-modules
  • From: Nick Alcock <nick.alcock@xxxxxxxxxx>
• Re: [RESEND PATCH 2/3] include: mfd: tps68470: Add masks for LEDA and LEDB
  • From: Dan Scally <dan.scally@xxxxxxxxxxxxxxxx>
• Re: [PATCH] leds: trigger/tty: Add knob to blink only for tx or only for rx
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: trigger/tty: Add knob to blink only for tx or only for rx
  • From: Alexander Dahl <ada@xxxxxxxxxxx>
• Re: [PATCH v17 RESEND 1/3] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v17 RESEND 0/3] Add MediaTek MT6370 PMIC support
  • From: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>
• [PATCH v17 RESEND 2/3] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>
• [PATCH v17 RESEND 1/3] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>
• [PATCH v17 RESEND 3/3] docs: leds: Add MT6370 RGB LED pattern document
  • From: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>
• Re: [RESEND PATCH 3/3] leds: tps68470: Add LED control for tps68470
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [RESEND PATCH 2/3] include: mfd: tps68470: Add masks for LEDA and LEDB
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [RESEND PATCH 1/3] platform: x86: int3472: Add MFD cell for tps68470 LED
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v5] dt-bindings: leds: Document commonly used LED triggers
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v7 0/6] Add a multicolor LED driver for groups of monochromatic LEDs
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v8 00/13] Adds support for PHY LEDs with offload triggers
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v7 1/2] tty: new helper function tty_get_mget
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v7 0/2] leds: ledtrig-tty: add tty_led_mode xtension
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v7 2/2] trigger: ledtrig-tty: add additional modes
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH v6 2/2] trigger: ledtrig-tty: add additional modes
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• [PATCH v6 2/2] trigger: ledtrig-tty: add additional modes
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v6 1/2] tty: new helper function tty_get_mget
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v6 0/2] leds: ledtrig-tty: add tty_led_mode xtension
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH v5 2/2] trigger: ledtrig-tty: add additional modes
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: [PATCH v5 2/2] trigger: ledtrig-tty: add additional modes
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: [PATCH v5 2/2] trigger: ledtrig-tty: add additional modes
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH v5 2/2] trigger: ledtrig-tty: add additional modes
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/3] leds: simatic-ipc-leds-gpio: split up into multiple drivers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] leds: simatic-ipc-leds-gpio: split up into multiple drivers
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH 3/3] leds: simatic-ipc-leds-gpio: introduce more Kconfig switches
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] leds: simatic-ipc-leds-gpio: split up into multiple drivers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] leds: simatic-ipc-leds-gpio: move two extra gpio pins into another table
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 3/3] leds: simatic-ipc-leds-gpio: introduce more Kconfig switches
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH 2/3] leds: simatic-ipc-leds-gpio: split up into multiple drivers
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH 0/3] leds: simatic-ipc-leds-gpio: split up
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH 1/3] leds: simatic-ipc-leds-gpio: move two extra gpio pins into another table
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v5 0/2] leds: ledtrig-tty: add tty_led_mode xtension
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v5 2/2] trigger: ledtrig-tty: add additional modes
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v5 1/2] tty: new helper function tty_get_mget
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH v8 13/13] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 11/13] dt-bindings: leds: Document netdev trigger
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 2/2] trigger: ledtrig-tty: add additional modes
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v7 0/6] Add a multicolor LED driver for groups of monochromatic LEDs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] trigger: ledtrig-tty: add additional modes
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v4 0/2] leds: ledtrig-tty: add tty_led_mode xtension
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v4 2/2] trigger: ledtrig-tty: add additional modes
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v4 1/2] tty: new helper function tty_get_mget
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH v3 2/2] trigger: ledtrig-tty: add additional modes
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• [PATCH v3 2/2] trigger: ledtrig-tty: add additional modes
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v3 1/2] tty: new helper function tty_get_mget
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v3 0/2] leds: ledtrig-tty: add tty_led_mode xtension
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: API for setting colors of RGB backlit keyboard zones (was [PATCH V3] platform/x86: hp-wmi: Support omen backlight control wmi-acpi methods)
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: API for setting colors of RGB backlit keyboard zones (was [PATCH V3] platform/x86: hp-wmi: Support omen backlight control wmi-acpi methods)
  • From: Rishit Bansal <rishitbansal0@xxxxxxxxx>
• Re: API for setting colors of RGB backlit keyboard zones (was [PATCH V3] platform/x86: hp-wmi: Support omen backlight control wmi-acpi methods)
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH] leds: Fix reference to led_set_brightness() in doc
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• Re: API for setting colors of RGB backlit keyboard zones (was [PATCH V3] platform/x86: hp-wmi: Support omen backlight control wmi-acpi methods)
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v8 12/13] dt-bindings: net: phy: Document support for leds node
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 11/13] dt-bindings: leds: Document netdev trigger
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v8 11/13] dt-bindings: leds: Document netdev trigger
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 00/13] Adds support for PHY LEDs with offload triggers
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v8 00/13] Adds support for PHY LEDs with offload triggers
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 1/2] tty: new helper function tty_get_mget
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/2] leds: ledtrig-tty: add tty_led_mode xtension
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v2 2/2] trigger: ledtrig-tty: add additional modes
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v2 1/2] tty: new helper function tty_get_mget
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH v8 12/13] dt-bindings: net: phy: Document support for leds node
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH 2/2] leds: trigger: ledtrig-tty: add additional modes
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: [PATCH v8 12/13] dt-bindings: net: phy: Document support for leds node
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v8 13/13] dt-bindings: net: dsa: qca8k: add LEDs definition example
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 09/13] leds: trigger: netdev: add additional hardware only triggers
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 11/13] dt-bindings: leds: Document netdev trigger
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 10/13] net: dsa: qca8k: add LEDs support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 12/13] dt-bindings: net: phy: Document support for leds node
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 05/13] leds: trigger: netdev: convert device attr to macro
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 08/13] leds: trigger: netdev: add available mode sysfs attr
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 06/13] leds: trigger: netdev: add hardware control support
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 04/13] leds: trigger: netdev: rename and expose NETDEV trigger enum modes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 07/13] leds: trigger: netdev: use mutex instead of spinlocks
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 03/13] leds: trigger: netdev: drop NETDEV_LED_MODE_LINKUP from mode
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 02/13] leds: add function to configure hardware controlled LED
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 01/13] leds: add support for hardware driven LEDs
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 00/13] Adds support for PHY LEDs with offload triggers
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v6] dt-bindings: leds: Document commonly used LED triggers
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v1 1/2] leds: lp8860: Remove unused of_gpio,h
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/2] leds: lp8860: Remove duplicate NULL checks
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: (subset) [PATCH 00/35] Documentation: correct lots of spelling errors (series 1)
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: trigger: ledtrig-tty: add additional modes
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: trigger: ledtrig-tty: add additional modes
  • From: Florian Eckert <fe@xxxxxxxxxx>