[PATCH v4 1/4] leds: simatic-ipc-leds-gpio: add terminating entries to gpio tables

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The entries do not seem to be stricly needed when the number of entries
is given via the number of LEDs. But adding them is a safeguard should
anyone ever iterate over the tables to their end, it also gets us in
line with other drivers that register "leds-gpio" tables.

Signed-off-by: Henning Schild <henning.schild@xxxxxxxxxxx>
---
 drivers/leds/simple/simatic-ipc-leds-gpio.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/leds/simple/simatic-ipc-leds-gpio.c b/drivers/leds/simple/simatic-ipc-leds-gpio.c
index e8d329b5a68c..1a1cfdad6218 100644
--- a/drivers/leds/simple/simatic-ipc-leds-gpio.c
+++ b/drivers/leds/simple/simatic-ipc-leds-gpio.c
@@ -28,6 +28,7 @@ static struct gpiod_lookup_table simatic_ipc_led_gpio_table_127e = {
 		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 51, NULL, 5, GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 56, NULL, 6, GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 59, NULL, 7, GPIO_ACTIVE_HIGH),
+		{} /* Terminating entry */
 	},
 };
 
@@ -42,6 +43,7 @@ static struct gpiod_lookup_table simatic_ipc_led_gpio_table_227g = {
 		GPIO_LOOKUP_IDX("gpio-f7188x-2", 5, NULL, 5, GPIO_ACTIVE_LOW),
 		GPIO_LOOKUP_IDX("gpio-f7188x-3", 6, NULL, 6, GPIO_ACTIVE_HIGH),
 		GPIO_LOOKUP_IDX("gpio-f7188x-3", 7, NULL, 7, GPIO_ACTIVE_HIGH),
+		{} /* Terminating entry */
 	}
 };
 
-- 
2.39.3




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux