In certain PMICs, LUT pattern and LPG configuration can be stored in SDAM
modules instead of LUT peripheral. This feature is called PPG.
This change series adds support for PPG. Thanks!
Anjelique Melendez (7):
dt-bindings: soc: qcom: Add qcom-pbs bindings
dt-bindings: leds: leds-qcom-lpg: Add support for LUT through NVMEM
devices
soc: qcom: add QCOM PBS driver
leds: rgb: leds-qcom-lpg: Add support for LUT pattern through single
SDAM
leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
leds: rgb: leds-qcom-lpg: Support two-nvmem PPG Scheme
leds: rgb: Update PM8350C lpg_data to support two-nvmem PPG Scheme
.../bindings/leds/leds-qcom-lpg.yaml | 85 ++++
.../bindings/soc/qcom/qcom-pbs.yaml | 41 ++
drivers/leds/rgb/leds-qcom-lpg.c | 393 ++++++++++++++++--
drivers/soc/qcom/Kconfig | 9 +
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/qcom-pbs.c | 343 +++++++++++++++
include/linux/soc/qcom/qcom-pbs.h | 36 ++
7 files changed, 877 insertions(+), 31 deletions(-)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom-pbs.yaml
create mode 100644 drivers/soc/qcom/qcom-pbs.c
create mode 100644 include/linux/soc/qcom/qcom-pbs.h
--
2.40.0
