On Fri, May 12, 2023 at 11:55 AM Bjorn Andersson
<quic_bjorande@xxxxxxxxxxx> wrote:
>
> The introduction of high resolution PWM support moved the parenthesis of
> the divisions in the calculation of min and max period. The result in
> both divisions is in most cases truncation to 0, which limits the period
> to the range of [0, 0].
>
> Both numerators (and denominators) are within 64 bits, so the whole
> expression can be put directly into the div64_u64, instead of doing it
> partially.
>
> Fixes: b00d2ed37617 ("leds: rgb: leds-qcom-lpg: Add support for high resolution PWM")
> Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
> ---
>
> This fixes the regression in v6.4-rc1.
>
> drivers/leds/rgb/leds-qcom-lpg.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c
> index c9cea797a697..7287fadc00df 100644
> --- a/drivers/leds/rgb/leds-qcom-lpg.c
> +++ b/drivers/leds/rgb/leds-qcom-lpg.c
> @@ -312,14 +312,14 @@ static int lpg_calc_freq(struct lpg_channel *chan, uint64_t period)
> max_res = LPG_RESOLUTION_9BIT;
> }
>
> - min_period = (u64)NSEC_PER_SEC *
> - div64_u64((1 << pwm_resolution_arr[0]), clk_rate_arr[clk_len - 1]);
> + min_period = div64_u64((u64)NSEC_PER_SEC * (1 << pwm_resolution_arr[0]),
> + clk_rate_arr[clk_len - 1]);
> if (period <= min_period)
> return -EINVAL;
>
> /* Limit period to largest possible value, to avoid overflows */
> - max_period = (u64)NSEC_PER_SEC * max_res * LPG_MAX_PREDIV *
> - div64_u64((1 << LPG_MAX_M), 1024);
> + max_period = div64_u64((u64)NSEC_PER_SEC * max_res * LPG_MAX_PREDIV * (1 << LPG_MAX_M),
> + 1024);
> if (period > max_period)
> period = max_period;
>
> --
> 2.25.1
>
Thank you!
Without this fix, the display never activates on the Thinkpad X13s
Tested on the Lenovo Thinkpad X13s
Tested-by: Steev Klimaszewski <steev@xxxxxxxx>
