Add subtype for the Qualcomm PMI8998 PMIC to support it besides the
PM8150 PMIC which has the same registers. Adjust the driver to recognize
both PMIC subtypes as a 3 channel LED driver.
Signed-off-by: Dylan Van Assche <me@xxxxxxxxxxxxxxxxx>
---
drivers/leds/flash/leds-qcom-flash.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/leds/flash/leds-qcom-flash.c b/drivers/leds/flash/leds-qcom-flash.c
index 90a24fa25a49..16045b5d89b1 100644
--- a/drivers/leds/flash/leds-qcom-flash.c
+++ b/drivers/leds/flash/leds-qcom-flash.c
@@ -18,7 +18,8 @@
#define FLASH_TYPE_VAL 0x18
#define FLASH_SUBTYPE_REG 0x05
-#define FLASH_SUBTYPE_3CH_VAL 0x04
+#define FLASH_SUBTYPE_3CH_PM8150_VAL 0x04
+#define FLASH_SUBTYPE_3CH_PMI8998_VAL 0x03
#define FLASH_SUBTYPE_4CH_VAL 0x07
#define FLASH_STS_3CH_OTST1 BIT(0)
@@ -682,7 +683,7 @@ static int qcom_flash_led_probe(struct platform_device *pdev)
return rc;
}
- if (val == FLASH_SUBTYPE_3CH_VAL) {
+ if (val == FLASH_SUBTYPE_3CH_PM8150_VAL || val == FLASH_SUBTYPE_3CH_PMI8998_VAL) {
flash_data->hw_type = QCOM_MVFLASH_3CH;
flash_data->max_channels = 3;
regs = mvflash_3ch_regs;
--
2.40.1
