The desired default behavior of LED1 / the charge LED is breathing
while charging and on/solid when full. Since triggers cannot select
breathing, blink_set() gets called when charging. Use breathing
when the default "charging-blink-full-solid" trigger is used to
achieve the desired default behavior.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/leds/leds-cht-wcove.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/leds/leds-cht-wcove.c b/drivers/leds/leds-cht-wcove.c
index 597bfbe19cc2..125e9331348c 100644
--- a/drivers/leds/leds-cht-wcove.c
+++ b/drivers/leds/leds-cht-wcove.c
@@ -266,7 +266,19 @@ static int cht_wc_leds_blink_set(struct led_classdev *cdev,
unsigned long *delay_on,
unsigned long *delay_off)
{
- return cht_wc_leds_set_effect(cdev, delay_on, delay_off, CHT_WC_LED_EFF_BLINKING);
+ u8 effect = CHT_WC_LED_EFF_BLINKING;
+
+ /*
+ * The desired default behavior of LED1 / the charge LED is breathing
+ * while charging and on/solid when full. Since triggers cannot select
+ * breathing, blink_set() gets called when charging. Use breathing
+ * when the default "charging-blink-full-solid" trigger is used to
+ * achieve the desired default behavior.
+ */
+ if (cdev->flags & LED_INIT_DEFAULT_TRIGGER)
+ effect = CHT_WC_LED_EFF_BREATHING;
+
+ return cht_wc_leds_set_effect(cdev, delay_on, delay_off, effect);
}
static int cht_wc_leds_pattern_set(struct led_classdev *cdev,
--
2.39.1
