On 17/04/2023 17:17, Christian Marangi wrote: > Add Switch LED for each port for MikroTik RB3011UiAS-RM. > > MikroTik RB3011UiAS-RM is a 10 port device with 2 qca8337 switch chips > connected. > > It was discovered that in the hardware design all 3 Switch LED trace of > the related port is connected to the same LED. This was discovered by > setting to 'always on' the related led in the switch regs and noticing > that all 3 LED for the specific port (for example for port 1) cause the > connected LED for port 1 to turn on. As an extra test we tried enabling > 2 different LED for the port resulting in the LED turned off only if > every led in the reg was off. > > Aside from this funny and strange hardware implementation, the device > itself have one green LED for each port, resulting in 10 green LED one > for each of the 10 supported port. > > Cc: Jonathan McDowell <noodles@xxxxxxxx> > Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx> > --- > arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 120 ++++++++++++++++++++++ Please do not send the DTS patches to the net-next, but to the Qualcomm SoC maintainers. The DTS must not be mixed with driver code. Best regards, Krzysztof
