Linux IIO Development

• Thread Index

• [PATCH v10 1/3] dt-bindings: adc-joystick: add poll-interval
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• Re: [PATCH v9 2/3] Input: adc-joystick - Add polled input device support
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH v9 2/3] Input: adc-joystick - Add polled input device support
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v9 3/3] arm64: dts: rockchip: Update joystick to polled for OG2
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v9 1/3] dt-bindings: adc-joystick: add poll-interval
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v9 0/3] dt-bindings: adc-joystick: add poll-interval
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• Re: [PATCH v8 2/3] Input: adc-joystick - Add polled input device support
  • From: Chris Morgan <macromorgan@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: Use u8 type in i2c transfer calls
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2] i2c: Use u8 type in i2c transfer calls
  • From: Jason Gerecke <killertofu@xxxxxxxxx>
• [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: vendor-prefixes: add MEMSensing Microsystems Co., Ltd.
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v4 3/3] dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v4 0/3] iio: accel: add MSA311 accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH] iio: add NULL pointer checks to iio device additional/removal
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v2 00/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• [PATCH v3 19/19] iio: adc: at91-sama5d2_adc: add runtime pm support
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 17/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 18/19] iio: adc: at91-sama5d2_adc: add empty line after functions
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 14/19] iio: adc: at91-sama5d2_adc: add startup and tracktim as parameter for at91_adc_setup_samp_freq()
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 15/19] iio: adc: at91-sama5d2_adc: lock around at91_adc_read_info_raw()
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 16/19] dt-bindings: iio: adc: at91-sama5d2_adc: add id for temperature channel
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 13/19] iio: adc: at91-sama5d2_adc: update trackx on emr
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 12/19] iio: adc: at91-sama5d2_adc: move oversampling storage in its function
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 11/19] iio: adc: at91-sama5d2_adc: add 64 and 256 oversampling ratio
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 10/19] iio: adc: at91-sama5d2_adc: adjust osr based on specific platform data
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 09/19] iio: adc: at91-sama5d2_adc: add .read_avail() chan_info ops
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 08/19] iio: adc: at91-sama5d2_adc: drop AT91_OSR_XSAMPLES defines
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 01/19] iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 06/19] iio: adc: at91-sama5d2_adc: handle different EMR.OSR for different hw versions
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 07/19] iio: adc: at91-sama5d2_adc: move the check of oversampling in its function
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 05/19] iio: adc: at91-sama5d2_adc: exit from write_raw() when buffers are enabled
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 03/19] iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 04/19] iio: adc: at91-sama5d2_adc: disable/prepare buffer on suspend/resume
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 02/19] iio: adc: at91-sama5d2_adc: check return status for pressure and touch
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 00/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/3] arm64: dts: imx93: add ADC support
  • From: haibo.chen@xxxxxxx
• [PATCH 1/3] iio: adc: add imx93 adc support
  • From: haibo.chen@xxxxxxx
• [PATCH 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC
  • From: haibo.chen@xxxxxxx
• Re: Controlling device power management from terminal
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: mlx90632 Add supply regulator documentation
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: mlx90632 Add supply regulator documentation
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• [PATCH 1/2] iio: temperature: mlx90632 Add supply regulator to sensor
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• [PATCH 0/2] iio: temperature: mlx90632: Add supply regulator
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• Re: [PATCH v2 00/10] dt-bindings: iio: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 27/32] iio/drivers/sun4i_gpadc: Switch to new of thermal API
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check
  • From: Patrick Williams <patrick@xxxxxxxxx>
• Re: [PATCH v2 00/10] dt-bindings: iio: use spi-peripheral-props.yaml
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v2 00/10] dt-bindings: iio: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 1/3] units: complement the set of Hz units
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v3 3/3] iio: common: scmi_sensors: use HZ macro from units.h
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v3 0/3] units: complement the set of Hz units
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v3 2/3] iio: accel: adxl345: use HZ macro from units.h
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• Re: [PATCH v2 1/3] units: complement the set of Hz units
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v2 00/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH v2 19/19] iio: adc: at91-sama5d2_adc: add runtime pm support
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH] HID: mcp2221: add ADC/DAC support via iio subsystem
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 3/5] iio: pressure: bmp280: Fix alignment for DMA safety
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH v4 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: szuni chen <szunichen@xxxxxxxxx>
• Re: [PATCH v4 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH v4 0/9] Improve MCP3911 driver
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v4 5/9] iio: adc: mcp3911: add support for buffers
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v6 05/13] dt-bindings: backlight: Add MediaTek MT6370 backlight
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH] HID: mcp2221: add ADC/DAC support via iio subsystem
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH] HID: mcp2221: add ADC/DAC support via iio subsystem
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• Re: [PATCH 1/2] iio: st_sensors: Retry ID verification on failure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 00/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 19/19] iio: adc: at91-sama5d2_adc: add runtime pm support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: adc: add max11410 adc driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: iio: adc: add adi,max11410.yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] HID: mcp2221: add ADC/DAC support via iio subsystem
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/2] iio: st_sensors: Retry ID verification on failure
  • From: Matti Lehtimäki <matti.lehtimaki@xxxxxxxxx>
• Re: [PATCH v3 27/32] iio/drivers/sun4i_gpadc: Switch to new of thermal API
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v4 10/10] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: accel: bma400: Add support for single and double tap events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 2/3] iio: adc: Add rtq6056 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: core: Add support for IIO_AVAIL_LIST_WITH_TYPE
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: inkern: Remove useless argument to iio_channel_read_max()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: afe/rescale: Add support for converting scale avail table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 9/9] iio: adc: mcp3911: add support to set PGA
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 6/9] iio: adc: mcp3911: add support for interrupts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 5/9] iio: adc: mcp3911: add support for buffers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 0/9] Improve MCP3911 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v10 0/2] Add LTRF216A Driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/5] iio: pressure: bmp280: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: Add names for function definition arguments.
  • From: Joe Simmons-Talbott <joetalbott@xxxxxxxxx>
• Re: [PATCH v4 3/5] iio: pressure: bmp280: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: st_sensors: Retry ID verification on failure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 02/10] dt-bindings: iio: accel: use spi-peripheral-props.yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: Be consistent with allocation result tests.
  • From: Joe Simmons-Talbott <joetalbott@xxxxxxxxx>
• Re: [PATCH] i2c: Use u8 type in i2c transfer calls
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Update Microchip MCP3911 to Maintained
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: pressure: dlhl60d: Don't take garbage into consideration when reading data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: ti,am3359-adc: add ti,am654-adc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] iio: Whitespace cleanup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 27/32] iio/drivers/sun4i_gpadc: Switch to new of thermal API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] HID: mcp2221: add ADC/DAC support via iio subsystem
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] units: complement the set of Hz units
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: Use parens with sizeof
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 00/10] dt-bindings: iio: use spi-peripheral-props.yaml
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v2 04/10] dt-bindings: iio: dac: use spi-peripheral-props.yaml
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v6 04/13] dt-bindings: leds: Add MediaTek MT6370 flashlight
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v4 10/10] iio: magnetometer: yas530: Add YAS537 variant
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 10/10] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v4 10/10] iio: magnetometer: yas530: Add YAS537 variant
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 09/10] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 10/10] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v4 09/10] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v4 09/10] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: common: scmi_sensors: use HZ macro from units.h
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/3] iio: accel: adxl345: use HZ macro from units.h
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/3] units: complement the set of Hz units
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 1/2] iio: humidity: hdc100x: switch to probe_new callback
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 10/10] iio: magnetometer: yas530: Add YAS537 variant
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 1/3] units: complement the set of Hz units
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] iio: common: scmi_sensors: use HZ macro from units.h
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v2 0/3] units: complement the set of Hz units
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] iio: accel: adxl345: use HZ macro from units.h
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v8 2/3] Input: adc-joystick - Add polled input device support
  • From: Chris Morgan <macromorgan@xxxxxxxxxxx>
• Re: [PATCH v4 09/10] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 09/10] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] HID: mcp2221: add ADC/DAC support via iio subsystem
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: szuni chen <szunichen@xxxxxxxxx>
• Re: [PATCH v8 2/3] iio: adc: Add rtq6056 support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [PATCH v5 1/2] iio: humidity: hdc100x: switch to probe_new callback
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• Re: [PATCH v4 10/10] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v4 09/10] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Use u8 type in i2c transfer calls
  • From: Jason Gerecke <killertofu@xxxxxxxxx>
• Re: [PATCH] i2c: Use u8 type in i2c transfer calls
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 0/2] iio: humidity: hdc100x: add manufacturer and device ID check
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 1/2] iio: humidity: hdc100x: switch to probe_new callback
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v8 2/3] Input: adc-joystick - Add polled input device support
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-binding: iio: time: add ti,am62-ecap-capture.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• [PATCH v3 1/2] dt-binding: iio: time: add ti,am62-ecap-capture.yaml
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• [PATCH v3 0/2] ECAP support on TI AM62x SoC
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-binding: iio: time: add capture-tiecap.yaml
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: ti,am3359-adc: add ti,am654-adc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: Use u8 type in i2c transfer calls
  • From: Jason Gerecke <killertofu@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: time: capture-tiecap: capture driver support for ECAP
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-binding: iio: time: add capture-tiecap.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v5 1/2] iio: humidity: hdc100x: switch to probe_new callback
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• [PATCH v5 0/2] iio: humidity: hdc100x: add manufacturer and device ID check
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• [PATCH v2 1/2] dt-binding: iio: time: add capture-tiecap.yaml
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• [PATCH v2 2/2] iio: time: capture-tiecap: capture driver support for ECAP
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• [PATCH v2 0/2] ECAP support on TI AM62x SoC
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• Re: [PATCH v4 0/2] iio: humidity: hdc100x: add manufacturer and device ID check
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• [PATCH v4 2/2] iio: humidity: hdc100x: add manufacturer and device ID check
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• [PATCH v4 1/2] iio: humidity: hdc100x: switch to probe_new callback
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• [PATCH v4 0/2] iio: humidity: hdc100x: add manufacturer and device ID check
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• [PATCH v3 27/32] iio/drivers/sun4i_gpadc: Switch to new of thermal API
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [PATCH 1/2] iio: Add blank lines after declarations.
  • From: Joe Simmons-Talbott <joetalbott@xxxxxxxxx>
• [PATCH 2/2] iio: Fix indentation for multiline conditional.
  • From: Joe Simmons-Talbott <joetalbott@xxxxxxxxx>
• [PATCH 0/2] iio: Whitespace cleanup
  • From: Joe Simmons-Talbott <joetalbott@xxxxxxxxx>
• Re: [PATCH v4 10/10] iio: magnetometer: yas530: Add YAS537 variant
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 09/10] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: humidity: hdc100x: add manufacturer and device ID check
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 1/2] iio: humidity: hdc100x: switch to probe_new callback
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 01/10] dt-bindings: iio: adc: use spi-peripheral-props.yaml
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v2 08/10] dt-bindings: iio: potentiometer: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 00/10] dt-bindings: iio: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 07/10] dt-bindings: iio: imu: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 09/10] dt-bindings: iio: samsung,sensorhub-rinato: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 10/10] dt-bindings: iio: temperature: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 05/10] dt-bindings: iio: frequency: adf4371: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 06/10] dt-bindings: iio: health: ti,afe4403: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 04/10] dt-bindings: iio: dac: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 03/10] dt-bindings: iio: amplifiers: adi,ada4250: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 02/10] dt-bindings: iio: accel: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 01/10] dt-bindings: iio: adc: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 2/2] iio: humidity: hdc100x: add manufacturer and device ID check
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• [PATCH v3 1/2] iio: humidity: hdc100x: switch to probe_new callback
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• [PATCH v3 0/2] iio: humidity: hdc100x: add manufacturer and device ID check
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• Re: PM runtime_error handling missing in many drivers?
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH] dt-bindings: iio: adc: ti,am3359-adc: add ti,am654-adc
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: humidity: hdc100x: add manufacturer and device ID cehck
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• Re: [PATCH] dt-bindings: iio/dac: adi,ad5766: Add missing type to 'output-range-microvolts'
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: humidity: hdc100x: add manufacturer and device ID cehck
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/1] iio: humidity: hdc100x: add manufacturer and device ID cehck
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/1] iio: humidity: hdc100x: add manufacturer and device ID cehck
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: PM runtime_error handling missing in many drivers?
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v2 1/1] iio: humidity: hdc100x: add manufacturer and device ID cehck
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v4 10/10] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v4 09/10] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v4 06/10] iio: magnetometer: yas530: Rename functions and registers
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: PM runtime_error handling missing in many drivers?
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH v1 1/1] iio: pressure: dlhl60d: Don't take garbage into consideration when reading data
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] dt-binding: iio: time: add capture-tiecap.yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree
  • From: Amjad Ouled-Ameur <aouledameur@xxxxxxxxxxxx>
• Re: [PATCH v1 1/3] units: complement the set of Hz units
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] dt-binding: iio: time: add capture-tiecap.yaml
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v1 2/2] dt-binding: iio: time: add capture-tiecap.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: PM runtime_error handling missing in many drivers?
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH v1 2/2] dt-binding: iio: time: add capture-tiecap.yaml
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• [PATCH v1 1/2] iio: time: capture-tiecap: capture driver support for ECAP
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• [PATCH v1 0/2] ECAP support on TI AM62x SoC
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: szuni chen <szunichen@xxxxxxxxx>
• Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: Controlling device power management from terminal
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: Controlling device power management from terminal
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• Re: [PATCH v1 1/3] units: complement the set of Hz units
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 27/32] iio/drivers/sun4i_gpadc: Switch to new of thermal API
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: Controlling device power management from terminal
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/2] iio: st_sensors: Fix null pointer on defer_probe error
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/2] iio: st_sensors: Retry ID verification on failure
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 5/5] iio: pressure: bmp280: Add more tunable config parameters for BMP380
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 3/5] iio: pressure: bmp280: Fix alignment for DMA safety
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 2/5] iio: pressure: bmp280: simplify driver initialization logic
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/1] iio: humidity: hdc100x: add manufacturer and device id cehck
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 2/3] iio: accel: adxl345: use HZ macro from units.h
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v1 3/3] iio: common: scmi_sensors: use HZ macro from units.h
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v1 0/3] units: complement the set of Hz units
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v1 1/3] units: complement the set of Hz units
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v10 2/2] iio: light: Add support for ltrf216a sensor
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• [PATCH v10 1/2] dt-bindings: Document ltrf216a light sensor bindings
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• [PATCH v10 0/2] Add LTRF216A Driver
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v6 07/13] mfd: mt6370: Add MediaTek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 07/13] mfd: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 07/13] mfd: mt6370: Add MediaTek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Controlling device power management from terminal
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 07/13] mfd: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v6 10/13] power: supply: mt6370: Add MediaTek MT6370 charger driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 09/13] iio: adc: mt6370: Add MediaTek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 07/13] mfd: mt6370: Add MediaTek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v6 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• [PATCH 2/2] iio: st_sensors: Fix null pointer on defer_probe error
  • From: Matti Lehtimäki <matti.lehtimaki@xxxxxxxxx>
• [PATCH 1/2] iio: st_sensors: Retry ID verification on failure
  • From: Matti Lehtimäki <matti.lehtimaki@xxxxxxxxx>
• Re: [PATCH v4 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v4 5/5] iio: pressure: bmp280: Add more tunable config parameters for BMP380
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v4 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v4 3/5] iio: pressure: bmp280: Fix alignment for DMA safety
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v4 2/5] iio: pressure: bmp280: simplify driver initialization logic
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v4 1/5] dt-bindings: iio: pressure: bmp085: Add BMP380 compatible string
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v4 0/5] Add support for pressure sensor Bosch BMP380
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH] MAINTAINERS: Update Microchip MCP3911 to Maintained
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v1 2/2] iio: accel: bma400: Add support for single and double tap events
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH v1 1/2] iio: Add new event type gesture and use direction for single and double tap
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: panel: explicitly list SPI CPHA and CPOL
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/1] iio: humidity: hdc100x: add manufacturer and device id cehck
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• Re: [PATCH v6 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v4 2/9] iio: adc: mcp3911: correct "microchip,device-addr" property
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v4 5/9] iio: adc: mcp3911: add support for buffers
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v4 3/9] iio: adc: mcp3911: use correct formula for AD conversion
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v4 8/9] iio: adc: mcp3911: add support for oversampling ratio
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v4 7/9] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v4 6/9] iio: adc: mcp3911: add support for interrupts
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v4 4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v4 9/9] iio: adc: mcp3911: add support to set PGA
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v4 1/9] iio: adc: mcp3911: make use of the sign bit
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v4 0/9] Improve MCP3911 driver
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 10/13] power: supply: mt6370: Add MediaTek MT6370 charger driver
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 09/13] iio: adc: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 07/13] mfd: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 06/13] dt-bindings: mfd: Add MediaTek MT6370
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 05/13] dt-bindings: backlight: Add MediaTek MT6370 backlight
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 04/13] dt-bindings: leds: Add MediaTek MT6370 flashlight
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 03/13] dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 02/13] dt-bindings: power: supply: Add MediaTek MT6370 Charger
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 01/13] dt-bindings: usb: Add MediaTek MT6370 TCPC
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v6 00/13] Add MediaTek MT6370 PMIC support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH 4/4] iio: afe/rescale: Implement write_raw
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] iio: afe/rescale: Add support for converting scale avail table
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/6] Add support for mp2733 battery charger
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PULL] 2nd IIO pull request for 5.20
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] iio: afe/rescale: Implement write_raw
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: afe/rescale: Add support for converting scale avail table
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 5/6] dt-bindings: net: explicitly list SPI CPHA and CPOL
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/6] dt-bindings: iio: explicitly list SPI CPHA and CPOL
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: panel: explicitly list SPI CPHA and CPOL
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 0/4] iio: afe/rescale improvements
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH 4/4] iio: afe/rescale: Implement write_raw
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH 3/4] iio: afe/rescale: Add support for converting scale avail table
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH 1/4] iio: inkern: Remove useless argument to iio_channel_read_max()
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH 2/4] iio: core: Add support for IIO_AVAIL_LIST_WITH_TYPE
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 2/3] Input: adc-joystick - Add polled input device support
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v8 3/3] arm64: dts: rockchip: Update joystick to polled for OG2
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v8 1/3] dt-bindings: adc-joystick: add poll-interval
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v8 0/3] dt-bindings: adc-joystick: add poll-interval
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• Re: [PATCH v3 0/6] Add support for mp2733 battery charger
  • From: saravanan sekar <sravanhome@xxxxxxxxx>
• [PATCH 6/6] spi: dt-bindings: drop CPHA and CPOL from common properties
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 5/6] dt-bindings: net: explicitly list SPI CPHA and CPOL
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/6] dt-bindings: iio: explicitly list SPI CPHA and CPOL
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/6] dt-bindings: eeprom: at25: explicitly list SPI CPHA and CPOL
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 4/6] dt-bindings: misc: explicitly list SPI CPHA and CPOL
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 0/6] dt-bindings: iio/panel/eeprom/misc/net/spi: drop SPI CPHA and CPOL
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/6] dt-bindings: panel: explicitly list SPI CPHA and CPOL
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re:Re: [PATCH] iio: magn: hmc5843: Fix typo 'the the' in comment
  • From: "Slark Xiao" <slark_xiao@xxxxxxx>
• Re: [PATCH] iio: magn: hmc5843: Fix typo 'the the' in comment
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v5 11/13] leds: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [RFC PATCH] dt-bindings: iio: adc: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 11/13] leds: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• [PATCH] iio: magn: hmc5843: Fix typo 'the the' in comment
  • From: Slark Xiao <slark_xiao@xxxxxxx>
• Re: [PATCH v9 1/2] dt-bindings: Document ltrf216a light sensor bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: Use u8 type in i2c transfer calls
  • From: Jason Gerecke <killertofu@xxxxxxxxx>
• Re: [PATCH v2] iio: adc: imx8qxp-adc: propagate regulator_get_voltage error
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH v2] iio: adc: imx8qxp-adc: propagate regulator_get_voltage error
  • From: Martin Larsson <martin.larsson@xxxxxxxx>
• [PULL] 2nd IIO pull request for 5.20
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree
  • From: Amjad Ouled-Ameur <aouledameur@xxxxxxxxxxxx>
• Re: [PATCH v5 11/13] leds: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [PATCH v5 11/13] leds: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [PATCH v2 1/3] iio: adc: add max11410 adc driver
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [RFC] iio: multiplexer: Copy scan_type details from parent to child
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: adc: imx8qxp-adc: propagate regulator_get_voltage error
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• RE: [PATCH] iio: adc: imx8qxp-adc: propagate regulator_get_voltage error
  • From: Bough Chen <haibo.chen@xxxxxxx>
• [PATCH] dt-bindings: iio/dac: adi,ad5766: Add missing type to 'output-range-microvolts'
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC] iio: multiplexer: Copy scan_type details from parent to child
  • From: Chris Morgan <macromorgan@xxxxxxxxxxx>
• Re: [RFC] iio: multiplexer: Copy scan_type details from parent to child
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] iio: adc: imx8qxp-adc: propagate regulator_get_voltage error
  • From: Martin Larsson <martin.larsson@xxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: iio: adc: add adi,max11410.yaml
  • From: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: adc: add max11410 adc driver
  • From: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>
• [PATCH v8 2/3] iio: adc: Add rtq6056 support
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH v8 3/3] Documentation: ABI: testing: rtq6056: Update ABI docs
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH v8 1/3] dt-bindings: iio: adc: Add rtq6056 adc support
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH v8 0/3] Add Richtek RTQ6056 support
  • From: cy_huang <u0084500@xxxxxxxxx>
• Re: [RFC] iio: multiplexer: Copy scan_type details from parent to child
  • From: Chris Morgan <macromorgan@xxxxxxxxxxx>
• Re: [RFC] iio: multiplexer: Copy scan_type details from parent to child
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC] iio: multiplexer: Copy scan_type details from parent to child
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v9 2/2] iio: light: Add support for ltrf216a sensor
  • From: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/1] dt-bindings: iio: adc: Add compatible for MT8188
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v9 2/2] iio: light: Add support for ltrf216a sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 2/2] iio: light: Add support for ltrf216a sensor
  • From: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/1] dt-bindings: iio: adc: Add compatible for MT8188
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v3 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [RFC PATCH v1] iio: trigger: move trig->owner init to trigger allocate() stage
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: humidity: dht11: Emit error messages for probe failures
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 1/1] dt-bindings: iio: adc: Add compatible for MT8188
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC] iio: multiplexer: Copy scan_type details from parent to child
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: humidity: dht11: Emit error messages for probe failures
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: humidity: dht11: Use dev_err_probe consistently
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: light: isl29028: Fix the warning in isl29028_remove()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V1 1/1] iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 3/3] Documentation: ABI: testing: rtq6056: Update ABI docs
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [PATCH] iio/hid: Add mount_matrix
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v3 1/1] dt-bindings: iio: adc: Add compatible for MT8188
  • From: Hui Liu <hui.liu@xxxxxxxxxxxx>
• [PATCH v3 0/1] MediaTek auxadc patch for mt8188
  • From: Hui Liu <hui.liu@xxxxxxxxxxxx>
• [PATCH v2 1/1] dt-bindings: iio: adc: add compatible for mt8188
  • From: Hui Liu <hui.liu@xxxxxxxxxxxx>
• [PATCH v2 0/1] MediaTek auxadc patch for mt8188
  • From: Hui Liu <hui.liu@xxxxxxxxxxxx>
• Re: [RFC PATCH] dt-bindings: iio: adc: use spi-peripheral-props.yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: humidity: dht11: Emit error messages for probe failures
  • From: Uwe Kleine-König <ukleinek@xxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: humidity: dht11: Use dev_err_probe consistently
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 3/3] iio: humidity: dht11: Use dev_err_probe consistently
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/3] iio: humidity: dht11: Emit error messages for probe failures
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/3] iio: humidity: dht11: Don't warn on memory allocation failure
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 3/3] iio: humidity: dht11: Use dev_err_probe consistently
  • From: Uwe Kleine-König <ukleinek@xxxxxxxxxx>
• [PATCH v2 2/3] iio: humidity: dht11: Emit error messages for probe failures
  • From: Uwe Kleine-König <ukleinek@xxxxxxxxxx>
• [PATCH v2 1/3] iio: humidity: dht11: Don't warn on memory allocation failure
  • From: Uwe Kleine-König <ukleinek@xxxxxxxxxx>
• [PATCH 3/3] iio: humidity: dht11: Use dev_err_probe consistently
  • From: Uwe Kleine-König <ukleinek@xxxxxxxxxx>
• [PATCH 1/3] iio: humidity: dht11: Don't warn on memory allocation failure
  • From: Uwe Kleine-König <ukleinek@xxxxxxxxxx>
• [PATCH 2/3] iio: humidity: dht11: Emit error messages for probe failures
  • From: Uwe Kleine-König <ukleinek@xxxxxxxxxx>
• [RFC] iio: multiplexer: Copy scan_type details from parent to child
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• Re: [PATCH v3 11/17] iio: core: Introduce _zeropoint for differential channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: proximity: sx9324: add empty line in front of bullet list
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: magnetometer: hmc5843: Remove duplicate 'the'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 00/36] IIO: switch easy cases to new simpler PM related macros.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads124s08: Drop unused parameter to ads124s_read()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: ABI: stm32-timer-trigger: Fuse unusual ABI into main doc.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: ABI: temperature: Unify documentation for thermocouple fault detection.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v9 2/2] iio: light: Add support for ltrf216a sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v1] iio: trigger: move trig->owner init to trigger allocate() stage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 2/3] iio: adc: Add rtq6056 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 3/3] Documentation: ABI: testing: rtq6056: Update ABI docs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 0/3] Add Richtek RTQ6056 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: Be consistent with allocation result tests.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2] iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Re: [PATCH v5 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: iio: adc: add compatible for mt8188
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: iio: adc: add compatible for mt8188
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v8 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v8 1/2] dt-bindings: iio: adc: add AD4130
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/1] dt-bindings: iio: adc: add compatible for mt8188
  • From: Hui Liu <hui.liu@xxxxxxxxxxxx>
• [PATCH 0/1] MediaTek auxadc patch for mt8188
  • From: Hui Liu <hui.liu@xxxxxxxxxxxx>
• Re: [PATCH v5 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 2/3] Input: adc-joystick - Add polled input device support
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v1] iio: trigger: move trig->owner init to trigger allocate() stage
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v5 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v2 3/5] dt-bindings: gpio: stmpe: Remove node name requirement
  • From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
• Re: [PATCH] iio/hid: Add mount_matrix
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v7 3/7] dt-bindings: pinctrl: qcom,pmic-gpio: add PMP8074
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v1 2/4] dt-bindings: gpio: stmpe: Remove node name requirement
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v5 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v5 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• [PATCH v7 3/3] Documentation: ABI: testing: rtq6056: Update ABI docs
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH v7 2/3] iio: adc: Add rtq6056 support
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH v7 1/3] dt-bindings: iio: adc: Add rtq6056 adc support
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH v7 0/3] Add Richtek RTQ6056 support
  • From: cy_huang <u0084500@xxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: Add rtq6056 support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [PATCH v3 09/15] iio: adc: at91-sama5d2_adc: convert to device properties
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: Add rtq6056 support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• [PATCH] iio: Be consistent with allocation result tests.
  • From: Joe Simmons-Talbott <joetalbott@xxxxxxxxx>
• Re: [PATCH] iio: Use parens with sizeof
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] iio: Use parens with sizeof
  • From: Joe Simmons-Talbott <joetalbott@xxxxxxxxx>
• Re: [PATCH] iio: Use parens with sizeof
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v3] iio: cros: Register FIFO callback after sensor is registered
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH] iio: Use parens with sizeof
  • From: Joe Simmons-Talbott <joetalbott@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: npcm: Add NPCM8XX support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: cros: Register FIFO callback after sensor is registered
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/5] iio: pressure: Kconfig: Add references to BMP380
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/9] iio: adc: mcp3911: use correct formula for AD conversion
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v5 11/13] leds: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v2] iio: light: isl29028: Fix the warning in isl29028_remove()
  • From: Zheyu Ma <zheyuma97@xxxxxxxxx>
• Re: [PATCH v5 11/13] power: axp20x_battery: Add constant charge current table
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v9 2/2] iio: light: Add support for ltrf216a sensor
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 10/13] power: supply: mt6370: Add MediaTek MT6370 charger driver
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH] iio: light: isl29028: Fix the warning in isl29028_remove()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH] dt-bindings: iio: adc: use spi-peripheral-props.yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 5/5] iio: test: rework Kconfig to support modules
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: ti-ads7950: selecting the adc input range
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: max1027: unlock on error path in max1027_read_single_value()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7949: Fix error message
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: Implement and utilize register structures for ISA drivers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: Add rtq6056 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: Add rtq6056 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/9] iio: adc: mcp3911: use correct formula for AD conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 09/10] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 00/10] Add support for magnetometer Yamaha YAS537
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: magnetometer: rm3100: do not explicity set INDIO_BUFFER_TRIGGERED mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: humidity: dht11: Improve error reporting in .probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 00/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 17/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 02/19] iio: adc: at91-sama5d2_adc: check return status for pressure and touch
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 02/19] iio: adc: at91-sama5d2_adc: check return status for pressure and touch
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Dynamically configured channels, overlap with GPIO, encoder support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: pressure: bmp280: Adds more tunable config parameters for BMP380
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 2/3] Input: adc-joystick - Add polled input device support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: proximity: sx_common: Allow IIO core to take care of firmware node
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: mxc4005: report orientation of accelerometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH v1] iio: trigger: move trig->owner init to trigger allocate() stage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: accel: bma400: Add support for single and double tap events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: Add new event type gesture and use direction for single and double tap
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: Add imx6ul & imx6sx compatibles
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 06/15] thermal: qcom: qcom-spmi-adc-tm5: convert to IIO fwnode API
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v5 11/13] leds: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 12/13] leds: flashlight: mt6370: Add MediaTek MT6370 flashlight support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 15/15] iio: inkern: fix coding style warnings
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 10/13] power: supply: mt6370: Add MediaTek MT6370 charger driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v5 06/13] dt-bindings: mfd: Add MediaTek MT6370
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] iio: light: isl29028: Fix the warning in isl29028_remove()
  • From: Zheyu Ma <zheyuma97@xxxxxxxxx>
• Re: [PATCH v5 09/13] iio: adc: mt6370: Add MediaTek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 11/13] leds: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 07/13] mfd: mt6370: Add MediaTek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 11/13] leds: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v5 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v5 09/13] iio: adc: mt6370: Add MediaTek MT6370 support
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v5 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v3 15/15] iio: inkern: fix coding style warnings
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v3 14/15] iio: inkern: remove OF dependencies
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v3 13/15] iio: adc: stm32-adc: convert to device properties
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v3 12/15] iio: adc: qcom-spmi-adc5: convert to device properties
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v3 08/15] iio: adc: ab8500-gpadc: convert to device properties
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v3 11/15] iio: adc: qcom-spmi-vadc: convert to device properties
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v3 10/15] iio: adc: qcom-pm8xxx-xoadc: convert to device properties
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v3 09/15] iio: adc: at91-sama5d2_adc: convert to device properties
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v3 07/15] iio: adc: ingenic-adc: convert to IIO fwnode interface
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v3 05/15] iio: inkern: move to fwnode properties
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v3 06/15] thermal: qcom: qcom-spmi-adc-tm5: convert to IIO fwnode API
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v3 04/15] iio: inkern: split of_iio_channel_get_by_name()
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v3 00/15] make iio inkern interface firmware agnostic
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v3 03/15] iio: inkern: only return error codes in iio_channel_get_*() APIs
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v3 02/15] iio: inkern: fix return value in devm_of_iio_channel_get_by_name()
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v3 01/15] iio: inkern: only release the device node when done with it
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v5 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 12/13] leds: flashlight: mt6370: Add MediaTek MT6370 flashlight support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 11/13] leds: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 10/13] power: supply: mt6370: Add MediaTek MT6370 charger driver
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 09/13] iio: adc: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 06/13] dt-bindings: mfd: Add MediaTek MT6370
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 07/13] mfd: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 05/13] dt-bindings: backlight: Add MediaTek MT6370 backlight
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 04/13] dt-bindings: leds: Add MediaTek MT6370 flashlight
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 03/13] dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 01/13] dt-bindings: usb: Add MediaTek MT6370 TCPC
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 02/13] dt-bindings: power: supply: Add MediaTek MT6370 Charger
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 00/13] Add MediaTek MT6370 PMIC support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v2 13/15] iio: adc: stm32-adc: convert to device properties
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v9 2/2] iio: light: Add support for ltrf216a sensor
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• [PATCH v9 1/2] dt-bindings: Document ltrf216a light sensor bindings
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• [PATCH v9 0/2] Add LTRF216A Driver
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• [RFC PATCH] dt-bindings: iio: adc: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: Re: [PATCH] dt-bindings: iio: adc: Add imx6ul & imx6sx compatibles
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v8 1/2] dt-bindings: iio: adc: add AD4130
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v8 0/2] AD4130
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v8 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH 3/4] counter: 104-quad-8: Implement and utilize register structures
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH 4/4] MAINTAINERS: Update 104-QUAD-8 driver maintainers list
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH 2/4] counter: 104-quad-8: Utilize iomap interface
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH 1/4] MAINTAINERS: Update info for William Breathitt Gray
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH 0/4] Counter updates and cleanups for 5.20
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PULL] IIO: New device support, features, cleanup and minor fixes for 5.20
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 2/2] iio: light: Add support for ltrf216a sensor
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PULL] IIO: New device support, features, cleanup and minor fixes for 5.20
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 13/13] video: backlight: mt6370: Add Mediatek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 13/13] video: backlight: mt6370: Add Mediatek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 13/13] video: backlight: mt6370: Add Mediatek MT6370 support
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• [PATCH v6 2/3] iio: adc: Add rtq6056 support
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH v6 3/3] Documentation: ABI: testing: rtq6056: Update ABI docs
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH v6 1/3] dt-bindings: iio: adc: Add rtq6056 adc support
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH v6 0/3] Add Richtek RTQ6056 support
  • From: cy_huang <u0084500@xxxxxxxxx>
• Re: [PATCH v4 13/13] video: backlight: mt6370: Add Mediatek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 13/13] video: backlight: mt6370: Add Mediatek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC] iio: afe: rescale: Add support for converting scale avail table
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH v8 2/2] iio: light: Add support for ltrf216a sensor
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• [PATCH v8 1/2] dt-bindings: Document ltrf216a light sensor bindings
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• [PATCH v8 0/2] Add LTRF216A Driver
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• Re: [PATCH v4 13/13] video: backlight: mt6370: Add Mediatek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v2] iio: light: cm32181: Add PM support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC] iio: afe: rescale: Add support for converting scale avail table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/5] dt-bindings: iio: adc: stmpe: Remove node name requirement
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: npcm: Add NPCM8XX support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: adc: xilinx-xadc: Make use of device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] Documentation: bno055: separate SPDX identifier and page title
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH v1] iio: trigger: move trig->owner init to trigger allocate() stage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio/hid: Add mount_matrix
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 13/15] iio: adc: stm32-adc: convert to device properties
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v3 2/2] iio: adc: npcm: Add NPCM8XX support
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: adc: npcm: Add npcm845 compatible string
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v3 0/2] iio: adc: npcm: add Arbel NPCM8XX support
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• Re: [PATCH v4 13/13] video: backlight: mt6370: Add Mediatek MT6370 support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 13/13] video: backlight: mt6370: Add Mediatek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 13/13] video: backlight: mt6370: Add Mediatek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: npcm: Add NPCM8XX support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 07/14] mfd: mt6370: Add Mediatek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: npcm: Add npcm845 compatible string
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v7 3/7] dt-bindings: pinctrl: qcom,pmic-gpio: add PMP8074
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH v3 07/14] mfd: mt6370: Add Mediatek MT6370 support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v1 2/4] dt-bindings: gpio: stmpe: Remove node name requirement
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 3/5] dt-bindings: gpio: stmpe: Remove node name requirement
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: adc: npcm: Add npcm845 compatible string
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v2 2/2] iio: adc: npcm: Add NPCM8XX support
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v2 0/2] iio: adc: npcm: add Arbel NPCM8XX support
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• Re: [PATCH v3 07/14] mfd: mt6370: Add Mediatek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v2] iio: light: cm32181: Add PM support
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] dt-bindings: input: touchscreen: stmpe: Remove node name requirement
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 4/5] dt-bindings: iio: adc: stmpe: Remove node name requirement
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 3/5] dt-bindings: gpio: stmpe: Remove node name requirement
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: IIO: Off sick....
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/5] mfd: stmpe: Probe sub-function by compatible
  • From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
• [PATCH v2 5/5] dt-bindings: input: touchscreen: stmpe: Remove node name requirement
  • From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
• [PATCH v2 3/5] dt-bindings: gpio: stmpe: Remove node name requirement
  • From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
• [PATCH v2 4/5] dt-bindings: iio: adc: stmpe: Remove node name requirement
  • From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
• IIO: Off sick....
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 07/14] mfd: mt6370: Add Mediatek MT6370 support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v1 2/4] dt-bindings: gpio: stmpe: Remove node name requirement
  • From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
• [PATCH v1 4/4] dt-bindings: input: touchscreen: stmpe: Remove node name requirement
  • From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
• [PATCH v1 3/4] dt-bindings: iio: adc: stmpe: Remove node name requirement
  • From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
• [PATCH v1 0/4] mfd: stmpe: Probe sub-function by compatible
  • From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
• Re: [PATCH v2 13/15] iio: adc: stm32-adc: convert to device properties
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [RFC] iio: afe: rescale: Add support for converting scale avail table
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC] iio: afe: rescale: Add support for converting scale avail table
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 4/7] pinctrl: qcom-pmic-gpio: add support for PMP8074
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v7 3/7] dt-bindings: pinctrl: qcom,pmic-gpio: add PMP8074
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC] iio: afe: rescale: Add support for converting scale avail table
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: iio: adc: npcm: Add npcm845 compatible string
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: iio: adc: npcm: Add npcm845 compatible string
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: iio: adc: npcm: Add npcm845 compatible string
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: npcm: Add NPCM8XX support
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v7 2/7] mfd: qcom-spmi-pmic: add support for PMP8074
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v7 1/7] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v7 7/7] arm64: dts: qcom: ipq8074-hk01: add VQMMC supply
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v7 6/7] arm64: dts: qcom: add PMP8074 DTSI
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v7 3/7] dt-bindings: pinctrl: qcom,pmic-gpio: add PMP8074
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v7 4/7] pinctrl: qcom-pmic-gpio: add support for PMP8074
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v7 5/7] iio: adc: qcom-spmi-adc5: add ADC5_VREF_VADC to rev2 ADC5
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH v6 09/12] pinctrl: qcom-pmic-gpio: add support for PMP8074
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [RFC] iio: afe: rescale: Add support for converting scale avail table
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: (subset) [PATCH v6 01/12] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3] iio: cros: Register FIFO callback after sensor is registered
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: iio: adc: npcm: Add npcm845 compatible string
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 2/2] iio: light: Add support for ltrf216a sensor
  • From: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
• Re: [PATCH v2] iio: cros: Register FIFO callback after sensor is registered
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3] iio: cros: Register FIFO callback after sensor is registered
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v7 2/2] iio: light: Add support for ltrf216a sensor
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: npcm: Add NPCM8XX support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: npcm: Add NPCM8XX support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 13/15] iio: adc: stm32-adc: convert to device properties
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH v2 03/15] iio: inkern: only return error codes in iio_channel_get_*() APIs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 15/15] iio: inkern: fix coding style warnings
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v7 2/2] iio: light: Add support for ltrf216a sensor
  • From: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
• Re: [PATCH v2 00/15] make iio inkern interface firmware agnostic
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v1 2/2] iio: adc: npcm: Add NPCM8XX support
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 0/2] iio: adc: npcm: add Arbel NPCM8XX support
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 1/2] dt-bindings: iio: adc: npcm: Add npcm845 compatible string
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• Re: [PATCH v7 2/2] iio: light: Add support for ltrf216a sensor
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 2/2] iio: light: Add support for ltrf216a sensor
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• RE: [PATCH v2 15/15] iio: inkern: fix coding style warnings
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v2 15/15] iio: inkern: fix coding style warnings
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 03/15] iio: inkern: only return error codes in iio_channel_get_*() APIs
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• RE: [PATCH v2 15/15] iio: inkern: fix coding style warnings
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v2 00/15] make iio inkern interface firmware agnostic
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 15/15] iio: inkern: fix coding style warnings
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 3/5] iio: pressure: bmp280: simplify driver initialization logic
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 01/15] iio: inkern: only release the device node when done with it
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 2/2] iio: light: Add support for ltrf216a sensor
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 3/5] iio: pressure: bmp280: simplify driver initialization logic
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v2 15/15] iio: inkern: fix coding style warnings
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 14/15] iio: inkern: remove OF dependencies
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 11/15] iio: adc: qcom-spmi-vadc: convert to device properties
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 13/15] iio: adc: stm32-adc: convert to device properties
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 12/15] iio: adc: qcom-spmi-adc5: convert to device properties
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 10/15] iio: adc: qcom-pm8xxx-xoadc: convert to device properties
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 09/15] iio: adc: at91-sama5d2_adc: convert to device properties
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 08/15] iio: adc: ab8500-gpadc: convert to device properties
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 07/15] iio: adc: ingenic-adc: convert to IIO fwnode interface
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 06/15] thermal: qcom: qcom-spmi-adc-tm5: convert to IIO fwnode API
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 05/15] iio: inkern: move to fwnode properties
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 04/15] iio: inkern: split of_iio_channel_get_by_name()
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 03/15] iio: inkern: only return error codes in iio_channel_get_*() APIs
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>