On 21/11/2022 13:35, Gerald Loacker wrote: > Add bindings for TI TMAG5273. > > Signed-off-by: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx> > --- > Changes in v2: > - Removed nodename > - Changed angle-enable to angle-measurement and used strings > - Added interrupts > - Removed vcc-supply from required properties > - Changed i2c-0 to i2c in examples > .../iio/magnetometer/ti,tmag5273.yaml | 75 +++++++++++++++++++ > MAINTAINERS | 6 ++ > 2 files changed, 81 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml > > diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml b/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml > new file mode 100644 > index 000000000000..b2ecd7054a34 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml > @@ -0,0 +1,75 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/magnetometer/ti,tmag5273.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor > + > +maintainers: > + - Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx> > + > +description: > + The TI TMAG5273 is a low-power linear 3D Hall-effect sensor. This device > + integrates three independent Hall-effect sensors in the X, Y, and Z axes. > + The device has an integrated temperature sensor available. The TMAG5273 > + can be configured through the I2C interface to enable any combination of > + magnetic axes and temperature measurements. An integrated angle calculation > + engine (CORDIC) provides full 360° angular position information for both > + on-axis and off-axis angle measurement topologies. The angle calculation is > + performed using two user-selected magnetic axes. > + > +properties: > + compatible: > + const: ti,tmag5273 > + > + reg: > + maxItems: 1 > + > + "#io-channel-cells": > + const: 1 > + > + ti,angle-measurement: > + $ref: /schemas/types.yaml#/definitions/string > + description: > + Enables angle measurement in the selected plane. > + If not specified, "x-y" will be anables as default. > + enum: > + - "off" > + - "x-y" > + - "y-z" > + - "x-z" Drop quotes from all these. With this: Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Best regards, Krzysztof
