Use a generic 'hsdev->usage' instead of the HID_USAGE_SENSOR_PROX to allow this driver to drive the Lenvo custom proximity sensor, which is registered under a 'custom' usage and not HID_USAGE_SENSOR_PROX. Add the Lenovo Intelligent Sensing Solution (LISS) human presence sensor to the platform device ids. Signed-off-by: Philipp Jungkamp <p.jungkamp@xxxxxxx> --- v2: - Remove some unnecessary newlines in function calls. v3: - No change. v4: - Clean up switch statement. drivers/iio/light/hid-sensor-prox.c | 37 ++++++++++++++++++----------- 1 file changed, 23 insertions(+), 14 deletions(-) diff --git a/drivers/iio/light/hid-sensor-prox.c b/drivers/iio/light/hid-sensor-prox.c index f10fa2abfe72..a47591e1bad9 100644 --- a/drivers/iio/light/hid-sensor-prox.c +++ b/drivers/iio/light/hid-sensor-prox.c @@ -61,6 +61,7 @@ static int prox_read_raw(struct iio_dev *indio_dev, long mask) { struct prox_state *prox_state = iio_priv(indio_dev); + struct hid_sensor_hub_device *hsdev; int report_id = -1; u32 address; int ret_type; @@ -75,6 +76,7 @@ static int prox_read_raw(struct iio_dev *indio_dev, report_id = prox_state->prox_attr.report_id; min = prox_state->prox_attr.logical_minimum; address = HID_USAGE_SENSOR_HUMAN_PRESENCE; + hsdev = prox_state->common_attributes.hsdev; break; default: report_id = -1; @@ -84,11 +86,8 @@ static int prox_read_raw(struct iio_dev *indio_dev, hid_sensor_power_state(&prox_state->common_attributes, true); *val = sensor_hub_input_attr_get_raw_value( - prox_state->common_attributes.hsdev, - HID_USAGE_SENSOR_PROX, address, - report_id, - SENSOR_HUB_SYNC, - min < 0); + hsdev, hsdev->usage, address, report_id, + SENSOR_HUB_SYNC, min < 0); hid_sensor_power_state(&prox_state->common_attributes, false); } else { @@ -191,10 +190,16 @@ static int prox_capture_sample(struct hid_sensor_hub_device *hsdev, switch (usage_id) { case HID_USAGE_SENSOR_HUMAN_PRESENCE: - prox_state->human_presence = *(u32 *)raw_data; - ret = 0; - break; - default: + switch (raw_len) { + case 1: + prox_state->human_presence = *(u8 *)raw_data; + return 0; + case 4: + prox_state->human_presence = *(u32 *)raw_data; + return 0; + default: + break; + } break; } @@ -244,7 +249,7 @@ static int hid_prox_probe(struct platform_device *pdev) prox_state->common_attributes.hsdev = hsdev; prox_state->common_attributes.pdev = pdev; - ret = hid_sensor_parse_common_attributes(hsdev, HID_USAGE_SENSOR_PROX, + ret = hid_sensor_parse_common_attributes(hsdev, hsdev->usage, &prox_state->common_attributes, prox_sensitivity_addresses, ARRAY_SIZE(prox_sensitivity_addresses)); @@ -262,7 +267,7 @@ static int hid_prox_probe(struct platform_device *pdev) ret = prox_parse_report(pdev, hsdev, (struct iio_chan_spec *)indio_dev->channels, - HID_USAGE_SENSOR_PROX, prox_state); + hsdev->usage, prox_state); if (ret) { dev_err(&pdev->dev, "failed to setup attributes\n"); return ret; @@ -291,8 +296,8 @@ static int hid_prox_probe(struct platform_device *pdev) prox_state->callbacks.send_event = prox_proc_event; prox_state->callbacks.capture_sample = prox_capture_sample; prox_state->callbacks.pdev = pdev; - ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_PROX, - &prox_state->callbacks); + ret = sensor_hub_register_callback(hsdev, hsdev->usage, + &prox_state->callbacks); if (ret < 0) { dev_err(&pdev->dev, "callback reg failed\n"); goto error_iio_unreg; @@ -314,7 +319,7 @@ static int hid_prox_remove(struct platform_device *pdev) struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct prox_state *prox_state = iio_priv(indio_dev); - sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_PROX); + sensor_hub_remove_callback(hsdev, hsdev->usage); iio_device_unregister(indio_dev); hid_sensor_remove_trigger(indio_dev, &prox_state->common_attributes); @@ -326,6 +331,10 @@ static const struct platform_device_id hid_prox_ids[] = { /* Format: HID-SENSOR-usage_id_in_hex_lowercase */ .name = "HID-SENSOR-200011", }, + { + /* Format: HID-SENSOR-tag-usage_id_in_hex_lowercase */ + .name = "HID-SENSOR-LISS-0226", + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(platform, hid_prox_ids); -- 2.38.1