Linux IIO Development

• Thread Index

• [PATCH v3 07/14] iio: ltc2688: Simplify using devm_regulator_*get_enable()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 09/14] iio: st_lsm6dsx: Simplify using devm_regulator_*get_enable()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 00/14] Use devm helpers for regulator get and enable
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v6 3/4] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v3 00/10] dt-bindings: iio: use spi-peripheral-props.yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2] iio: Avoid multiple line dereference for mask
  • From: Joe Simmons-Talbott <joetalbott@xxxxxxxxx>
• Re: [PATCH v6 3/4] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: Drop Tomislav Denis
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] input: joystick: Fix buffer data parsing
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: add helper function for reading channel offset in buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: add iio_channel_cb_get_iio_buffer helper
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: add iio_channel_cb_get_iio_buffer helper
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 3/5] iio: adc: qcom-spmi-adc5: add ADC5_VREF_VADC to rev2 ADC5
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: move from strlcpy with unused retval to strscpy
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: Avoid multiple line dereference for mask
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: ad7292: Prevent regulator double disable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: frequency: admv1014: return -EINVAL directly
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/4] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: pressure: bmp280: fix datasheet links
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH] iio: frequency: admv1014: return -EINVAL directly
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: add helper function for reading channel offset in buffer
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 0/4] iio/adc-joystick: buffer data parsing fixes
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] iio: add helper function for reading channel offset in buffer
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: pressure: bmp280: fix datasheet links
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: pressure: bmp280: fix datasheet links
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH 1/4] iio/adc: ingenic: fix channel offsets in buffer
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/4] iio/adc: ingenic: fix channel offsets in buffer
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: pressure: dps310: Refactor startup procedure
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: pressure: bmp280: fix datasheet links
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/2] iio: Add new event type gesture and use direction for single and double tap
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] iio: ad7292: Prevent regulator double disable
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v6 3/4] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 4/4] input: joystick: Fix buffer data parsing
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 3/4] iio: add helper function for reading channel offset in buffer
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/4] iio: add iio_channel_cb_get_iio_buffer helper
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/4] iio/adc: ingenic: fix channel offsets in buffer
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: move from strlcpy with unused retval to strscpy
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: buffer: Silence lock nesting splat
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v8 1/5] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH v3 2/2] dt-bindings: iio: adc: add adi,max11410.yaml
  • From: "Bolucu, Nurettin" <Nurettin.Bolucu@xxxxxxxxxx>
• Re: [PATCH] iio: Avoid multiple line dereference for mask
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH v8 3/5] iio: adc: qcom-spmi-adc5: add ADC5_VREF_VADC to rev2 ADC5
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v8 4/5] arm64: dts: qcom: add PMP8074 DTSI
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v8 1/5] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v8 5/5] arm64: dts: qcom: ipq8074-hk01: add VQMMC supply
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v8 2/5] mfd: qcom-spmi-pmic: add support for PMP8074
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH] iio: move from strlcpy with unused retval to strscpy
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 0/4] iio/adc-joystick: buffer data parsing fixes
  • From: Chris Morgan <macromorgan@xxxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: iio: adc: Drop Patrick Vasseur
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: Drop Tomislav Denis
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 00/10] dt-bindings: iio: use spi-peripheral-props.yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] iio: Avoid multiple line dereference for mask
  • From: Joe Simmons-Talbott <joetalbott@xxxxxxxxx>
• Re: (subset) [PATCH v2 0/7] Devm helpers for regulator get and enable
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: (subset) [PATCH v2 0/7] Devm helpers for regulator get and enable
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/7] Devm helpers for regulator get and enable
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• RE: [PATCH 2/2] drivers: iio: accel adxl312 and adxl314 support
  • From: "Mois, George" <George.Mois@xxxxxxxxxx>
• Re: [PATCH v3 09/15] iio: adc: at91-sama5d2_adc: convert to device properties
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• [linux-next:master] BUILD SUCCESS WITH WARNING 95d10484d66e54d5c01e36389e9318221fb8f60b
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v6 0/9] Improve MCP3911 driver
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v5 2/3] Documentation: ABI: sysfs-bus-counter: add capture items
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• [PATCH v5 1/3] dt-bindings: counter: add ti,am62-ecap-capture.yaml
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• [PATCH v5 0/3] ECAP support on TI AM62x SoC
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• [PATCH v5 3/3] counter: ti-ecap-capture: capture driver support for ECAP
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• Re: [PATCH v4 0/3] ECAP support on TI AM62x SoC
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• [PATCH 4/4] input: joystick: Fix buffer data parsing
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH 2/4] iio: add iio_channel_cb_get_iio_buffer helper
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH 3/4] iio: add helper function for reading channel offset in buffer
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH 1/4] iio/adc: ingenic: fix channel offsets in buffer
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH 0/4] iio/adc-joystick: buffer data parsing fixes
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• Re: [PATCH v6 0/9] Improve MCP3911 driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v13 3/3] arm64: dts: rockchip: Update joystick to polled for OG2
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v13 1/3] dt-bindings: adc-joystick: add poll-interval
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v13 0/3] adc-joystick: add poll-interval
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v13 2/3] input: adc-joystick - Add polled input device support
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v6 2/4] dt-bindings: vendor-prefixes: add MEMSensing Microsystems Co., Ltd.
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v6 4/4] dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v6 0/4] iio: accel: add MSA311 accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v6 3/4] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v6 1/4] lib/string_helpers: Add str_read_write() helper
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v7 06/13] dt-bindings: mfd: Add MediaTek MT6370
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v4 3/3] counter: capture-tiecap: capture driver support for ECAP
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• Re: [PATCH v4 3/3] counter: capture-tiecap: capture driver support for ECAP
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v4 3/3] counter: capture-tiecap: capture driver support for ECAP
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v6 0/9] Improve MCP3911 driver
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH 2/2] drivers: iio: accel adxl312 and adxl314 support
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] counter: Move symbols into COUNTER namespace
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] drivers: iio: accel adxl312 and adxl314 support
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/2] drivers: iio: accel adxl312 and adxl314 support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: pressure: icp10100: Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS().
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• [PATCH 3/3] dt-bindings: iio: adc: Drop Patrick Vasseur
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: iio: Drop Tomislav Denis
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/3] iio: MAINTAINERS: Drop Tomislav Denis
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] drivers: iio: accel adxl312 and adxl314 support
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v3 10/10] dt-bindings: iio: temperature: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 09/10] dt-bindings: iio: samsung,sensorhub-rinato: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 07/10] dt-bindings: iio: imu: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 08/10] dt-bindings: iio: potentiometer: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 06/10] dt-bindings: iio: health: ti,afe4403: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 05/10] dt-bindings: iio: frequency: adf4371: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 03/10] dt-bindings: iio: amplifiers: adi,ada4250: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 04/10] dt-bindings: iio: dac: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 01/10] dt-bindings: iio: adc: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 02/10] dt-bindings: iio: accel: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 00/10] dt-bindings: iio: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/7] Devm helpers for regulator get and enable
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] drivers: iio: accel adxl312 and adxl314 support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] bindings: iio: accel: extend adxl313 documentation file
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/7] Devm helpers for regulator get and enable
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: (subset) [PATCH v2 0/7] Devm helpers for regulator get and enable
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 2/2] drivers: iio: accel adxl312 and adxl314 support
  • From: George Mois <george.mois@xxxxxxxxxx>
• [PATCH 1/2] bindings: iio: accel: extend adxl313 documentation file
  • From: George Mois <george.mois@xxxxxxxxxx>
• [PATCH 0/2] Add support for ADXL312 and ADXL314 accelerometers
  • From: George Mois <george.mois@xxxxxxxxxx>
• Re: [PATCH v6 0/9] Improve MCP3911 driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 0/3] ECAP support on TI AM62x SoC
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• Re: [PATCH 06/13] iio: adc: rockchip_saradc: Benefit from devm_clk_get_enabled() to simplify
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] iio: buffer: Silence lock nesting splat
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• Re: [PATCH 06/13] iio: adc: rockchip_saradc: Benefit from devm_clk_get_enabled() to simplify
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/7] Devm helpers for regulator get and enable
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: (subset) [PATCH v2 0/7] Devm helpers for regulator get and enable
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 3/3] counter: capture-tiecap: capture driver support for ECAP
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• Re: [PATCH 06/13] iio: adc: rockchip_saradc: Benefit from devm_clk_get_enabled() to simplify
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v4 3/3] counter: capture-tiecap: capture driver support for ECAP
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• Re: (subset) [PATCH v2 0/7] Devm helpers for regulator get and enable
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH] counter: interrupt-cnt: Implement watch_validate callback
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH] iio: stx104: Move to addac subdirectory
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/7] Devm helpers for regulator get and enable
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/7] Devm helpers for regulator get and enable
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] counter: Move symbols into COUNTER namespace
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/7] Devm helpers for regulator get and enable
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH] iio: pressure: bmp280: fix datasheet links
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: (subset) [PATCH v2 0/7] Devm helpers for regulator get and enable
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/7] Devm helpers for regulator get and enable
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: Add new event type gesture and use direction for single and double tap
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: (subset) [PATCH v2 0/7] Devm helpers for regulator get and enable
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/7] Devm helpers for regulator get and enable
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v5 2/2] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v5 0/2] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v5 1/2] iio: pressure: dps310: Refactor startup procedure
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH v5 6/7] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: pressure: dps310: Refactor startup procedure
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH] counter: 104-quad-8: Fix skipped IRQ lines during events configuration
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [RESEND PATCH v8 06/12] lib: add linear range index macro
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v4 3/3] counter: capture-tiecap: capture driver support for ECAP
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [RESEND PATCH v8 05/12] dt-bindings: backlight: Add MediaTek MT6370 backlight
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [RESEND PATCH v8 12/12] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• [PATCH] iio: ltc2497: Fix reading conversion results
  • From: Denys Zagorui <dzagorui@xxxxxxxxx>
• [RESEND PATCH v8 11/12] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [RESEND PATCH v8 12/12] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [RESEND PATCH v8 10/12] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [RESEND PATCH v8 09/12] power: supply: mt6370: Add MediaTek MT6370 charger driver
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [RESEND PATCH v8 08/12] iio: adc: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [RESEND PATCH v8 07/12] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [RESEND PATCH v8 06/12] lib: add linear range index macro
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [RESEND PATCH v8 05/12] dt-bindings: backlight: Add MediaTek MT6370 backlight
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [RESEND v8 04/12] dt-bindings: leds: Add MediaTek MT6370 flashlight
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [RESNED PATCH v8 03/12] dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [RESEND PATCH v8 02/12] dt-bindings: power: supply: Add MediaTek MT6370 Charger
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [RESEND PATCH v8 01/12] dt-bindings: usb: Add MediaTek MT6370 TCPC
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [RESEND PATCH v8 00/12] Add MediaTek MT6370 PMIC support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH 06/13] iio: adc: rockchip_saradc: Benefit from devm_clk_get_enabled() to simplify
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 06/13] iio: adc: rockchip_saradc: Benefit from devm_clk_get_enabled() to simplify
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v6 7/9] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v6 8/9] iio: adc: mcp3911: add support for oversampling ratio
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v6 6/9] iio: adc: mcp3911: add support for interrupts
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v6 3/9] iio: adc: mcp3911: use correct formula for AD conversion
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v6 9/9] iio: adc: mcp3911: add support to set PGA
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v6 5/9] iio: adc: mcp3911: add support for buffers
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v6 4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v6 1/9] iio: adc: mcp3911: make use of the sign bit
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v6 2/9] iio: adc: mcp3911: correct "microchip,device-addr" property
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v6 0/9] Improve MCP3911 driver
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v5 7/9] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v7 10/13] power: supply: mt6370: Add MediaTek MT6370 charger driver
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 7/7] iio: Simplify drivers using devm_regulator_*get_enable()
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH] iio: light: cm32181: make cm32181_pm_ops static
  • From: sunliming <sunliming@xxxxxxxxxx>
• Re: [PATCH 06/13] iio: adc: rockchip_saradc: Benefit from devm_clk_get_enabled() to simplify
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: max5432: use KBUILD_MODNAME as driver name
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: adc: rzg2l: Use RUNTIME_PM_OPS() instead of SET_*
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] staging: iio: frequency: ad9832: Fix alignment for DMA safety
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 11/13] iio: frequency: admv1013: Benefit from devm_clk_get_enabled() to simplify
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 06/13] iio: adc: rockchip_saradc: Benefit from devm_clk_get_enabled() to simplify
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 0/3] ECAP support on TI AM62x SoC
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH] iio: potentiometer: max5432: use KBUILD_MODNAME as driver name
  • From: Martin Kaiser <martin@xxxxxxxxx>
• Re: [PATCH v1 1/1] iio: pressure: dlhl60d: Don't take garbage into consideration when reading data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/3] counter: capture-tiecap: capture driver support for ECAP
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: accel: bma400: Add support for single and double tap events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: Add new event type gesture and use direction for single and double tap
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/5] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 00/14] Add support for magnetometer Yamaha YAS537
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 6/7] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 6/7] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: light: ltrf216a: Add raw attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: adc: add adi,max11410.yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: adc: add max11410 adc driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/2] iio: adc: add max11410 adc driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/3] counter: capture-tiecap: capture driver support for ECAP
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/5] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH v5 1/5] iio: pressure: bmp280: simplify driver initialization logic
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH v5 0/9] Improve MCP3911 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 5/9] iio: adc: mcp3911: add support for buffers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/2] iio: temperature: mlx90632: Add supply regulator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/5] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/5] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/5] iio: pressure: bmp280: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/5] iio: pressure: bmp280: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/5] iio: pressure: bmp280: simplify driver initialization logic
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 28/33] iio/drivers/sun4i_gpadc: Switch to new of thermal API
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• Re: [PATCH v4 2/3] Documentation: ABI: add sysfs-bus-counter-ecap
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v6 13/14] iio: magnetometer: yas530: Add function pointers to "chip_info"
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 12/14] iio: magnetometer: yas530: Add temperature calculation to "chip_info"
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 11/14] iio: magnetometer: yas530: Add IIO scaling to "chip_info"
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 10/14] iio: magnetometer: yas530: Add volatile registers to "chip_info"
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 07/14] iio: magnetometer: yas530: Move printk %*ph parameters out from stack
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 01/13] iio: adc: ad7124: Benefit from devm_clk_get_enabled() to simplify
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 11/13] iio: frequency: admv1013: Benefit from devm_clk_get_enabled() to simplify
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 06/13] iio: adc: rockchip_saradc: Benefit from devm_clk_get_enabled() to simplify
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 05/13] iio: adc: lpc18xx: Benefit from devm_clk_get_enabled() to simplify
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 04/13] iio: adc: ingenic-adc: Benefit from devm_clk_get_prepared() to simplify
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/5] PM: core: Add EXPORT_NS_GPL_DEV_PM_OPS to avoid drivers rolling own.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: rzg2l: Use RUNTIME_PM_OPS() instead of SET_*
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] Trivial cleanup and refactor dev_pm_ops handling.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: mt6360: Drop an incorrect __maybe_unused marking.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2] staging: iio: frequency: ad9832: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/4] staging: iio: DMA alignment fixes.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] IIO: Clean up a couple of warnings that snuck in.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 06/13] dt-bindings: mfd: Add MediaTek MT6370
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 09/13] iio: adc: mt6370: Add MediaTek MT6370 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Controlling device power management from terminal
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/5] dt-bindings: iio: adc: stmpe: Remove node name requirement
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] mfd: qcom-spmi-pmic: Add more PMIC SUBTYPE IDs
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• [PATCH] mfd: qcom-spmi-pmic: Add more PMIC SUBTYPE IDs
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2 2/2] iio: accel: bma400: Add support for single and double tap events
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v2 1/2] iio: Add new event type gesture and use direction for single and double tap
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v2 0/2] iio: Add single and double tap events support
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH v5 6/7] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 2/2] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v6 14/14] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v6 13/14] iio: magnetometer: yas530: Add function pointers to "chip_info"
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v6 12/14] iio: magnetometer: yas530: Add temperature calculation to "chip_info"
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v6 11/14] iio: magnetometer: yas530: Add IIO scaling to "chip_info"
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: pressure: dps310: Refactor startup procedure
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v6 10/14] iio: magnetometer: yas530: Add volatile registers to "chip_info"
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v6 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v6 08/14] iio: magnetometer: yas530: Apply documentation and style fixes
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v6 07/14] iio: magnetometer: yas530: Move printk %*ph parameters out from stack
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v6 06/14] iio: magnetometer: yas530: Rename functions and registers
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v6 05/14] iio: magnetometer: yas530: Change data type of calibration coefficients
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v6 04/14] iio: magnetometer: yas530: Correct temperature handling
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v6 03/14] iio: magnetometer: yas530: Correct scaling of magnetic axes
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v6 02/14] iio: magnetometer: yas530: Change range of data in volatile register
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v6 00/14] Add support for magnetometer Yamaha YAS537
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v6 01/14] iio: magnetometer: yas530: Change data type of hard_offsets to signed
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v5 14/14] iio: magnetometer: yas530: Add YAS537 variant
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 14/14] iio: magnetometer: yas530: Add YAS537 variant
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v5 1/7] lib/string_helpers: Add str_read_write() helper
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v5 6/7] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] iio/hwmon/mfd/leds/net/power/ASoC: dt-bindings: few stale maintainers cleanup
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v5 6/7] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v5 0/7] iio: accel: add MSA311 accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v5 7/7] dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v5 3/7] iio: accel: adxl345: use HZ macro from units.h
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v5 5/7] dt-bindings: vendor-prefixes: add MEMSensing Microsystems Co., Ltd.
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v5 2/7] units: complement the set of Hz units
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v5 4/7] iio: common: scmi_sensors: use HZ macro from units.h
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v5 1/7] lib/string_helpers: Add str_read_write() helper
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v12 2/3] Input: adc-joystick - Add polled input device support
  • From: Chris Morgan <macromorgan@xxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH 1/3] iio: adc: add imx93 adc support
  • From: Bough Chen <haibo.chen@xxxxxxx>
• RE: [PATCH 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC
  • From: Bough Chen <haibo.chen@xxxxxxx>
• Re: [PATCH v5 3/5] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v2 7/7] iio: Simplify drivers using devm_regulator_*get_enable()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 0/7] Devm helpers for regulator get and enable
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2] iio: light: ltrf216a: Add raw attribute
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• Re: [PATCH v5 2/5] iio: pressure: bmp280: Fix alignment for DMA safety
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• RE: PROBLEM: Some intel-ish/hid-sensor-hub IIO devices always report 0 on synchronous read
  • From: "Xu, Even" <even.xu@xxxxxxxxx>
• Aw: Re: PROBLEM: Some intel-ish/hid-sensor-hub IIO devices always report 0 on synchronous read
  • From: Philipp Jungkamp <p.jungkamp@xxxxxxx>
• Re: PROBLEM: Some intel-ish/hid-sensor-hub IIO devices always report 0 on synchronous read
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• PROBLEM: Some intel-ish/hid-sensor-hub IIO devices always report 0 on synchronous read
  • From: Philipp Jungkamp <p.jungkamp@xxxxxxx>
• Re: [PATCH] iio: light: Add raw attribute
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: temp: mlx90632: Switch form UNVIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS()
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v3 2/2] dt-bindings: iio: adc: add adi,max11410.yaml
  • From: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>
• [PATCH v3 1/2] iio: adc: add max11410 adc driver
  • From: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>
• [PATCH v3 0/2] iio: adc: add max11410 adc driver
  • From: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>
• Re: [PATCH] iio: light: Add raw attribute
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: light: Add raw attribute
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• Re: [PATCH] iio: light: Add raw attribute
  • From: Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>
• [PATCH] iio: light: Add raw attribute
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• Re: [PATCH v12 2/3] Input: adc-joystick - Add polled input device support
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v4 1/3] dt-binding: counter: add ti,am62-ecap-capture.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 2/3] Documentation: ABI: add sysfs-bus-counter-ecap
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• [PATCH v4 3/3] counter: capture-tiecap: capture driver support for ECAP
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• [PATCH v4 1/3] dt-binding: counter: add ti,am62-ecap-capture.yaml
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• [PATCH v4 0/3] ECAP support on TI AM62x SoC
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• Re: [PATCH v2 5/5] dt-bindings: Drop Dan Murphy and Ricardo Rivera-Matos
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] dt-bindings: Drop Dan Murphy and Ricardo Rivera-Matos
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 4/5] dt-bindings: Drop Robert Jones
  • From: Lee Jones <lee@xxxxxxxxxx>
• [RFC PATCH 7/7] adc: ad7192: simplify using devm_regulator_get_enable()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 4/5] dt-bindings: Drop Robert Jones
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [RFC PATCH 0/7] Devm helpers for regulator get and enable
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 4/5] dt-bindings: Drop Robert Jones
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 5/5] dt-bindings: Drop Dan Murphy and Ricardo Rivera-Matos
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v5 14/14] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v5 13/14] iio: magnetometer: yas530: Add function pointers to "chip_info"
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v5 12/14] iio: magnetometer: yas530: Add temperature calculation to "chip_info"
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v5 07/14] iio: magnetometer: yas530: Move printk %*ph parameters out from stack
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v5 06/14] iio: magnetometer: yas530: Rename functions and registers
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v4 2/2] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v4 1/2] iio: pressure: dps310: Refactor startup procedure
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v4 0/2] iio: pressure: dps310: Reset chip if MEAS_CFG is corrupt
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH 5/5] dt-bindings: Drop Dan Murphy
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH 0/5] iio/hwmon/mfd/leds/net/power/ASoC: dt-bindings: few stale maintainers cleanup
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH v2 5/5] dt-bindings: Drop Dan Murphy and Ricardo Rivera-Matos
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v2 5/5] dt-bindings: Drop Dan Murphy and Ricardo Rivera-Matos
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 4/5] dt-bindings: Drop Robert Jones
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 3/5] dt-bindings: Drop Beniamin Bia and Stefan Popa
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/5] dt-bindings: iio: Drop Bogdan Pricop
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 1/5] dt-bindings: iio: Drop Joachim Eastwood
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 0/5] iio/hwmon/mfd/leds/net/power/ASoC: dt-bindings: few stale maintainers cleanup
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 4/5] dt-bindings: iio: adc: stmpe: Remove node name requirement
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 5/5] dt-bindings: input: touchscreen: stmpe: Remove node name requirement
  • From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
• Re: [PATCH v2 3/5] dt-bindings: gpio: stmpe: Remove node name requirement
  • From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
• Re: [PATCH v2 4/5] dt-bindings: iio: adc: stmpe: Remove node name requirement
  • From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
• Re: [PATCH v2 0/5] mfd: stmpe: Probe sub-function by compatible
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v7 07/13] mfd: mt6370: Add MediaTek MT6370 support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v7 06/13] dt-bindings: mfd: Add MediaTek MT6370
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 7/9] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 5/9] iio: adc: mcp3911: add support for buffers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v5 4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 0/5] mfd: stmpe: Probe sub-function by compatible
  • From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
• [PATCH v5 9/9] iio: adc: mcp3911: add support to set PGA
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v5 6/9] iio: adc: mcp3911: add support for interrupts
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v5 4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v5 7/9] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v5 8/9] iio: adc: mcp3911: add support for oversampling ratio
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v5 5/9] iio: adc: mcp3911: add support for buffers
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v5 3/9] iio: adc: mcp3911: use correct formula for AD conversion
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v5 1/9] iio: adc: mcp3911: make use of the sign bit
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v5 2/9] iio: adc: mcp3911: correct "microchip,device-addr" property
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v5 0/9] Improve MCP3911 driver
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• Re: [PATCH 04/13] iio: adc: ingenic-adc: Benefit from devm_clk_get_prepared() to simplify
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 0/5] iio/hwmon/mfd/leds/net/power/ASoC: dt-bindings: few stale maintainers cleanup
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 5/5] dt-bindings: Drop Dan Murphy
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 04/13] iio: adc: ad9467: Benefit from devm_clk_get_prepared() to simplify
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 11/13] iio: frequency: admv1013: Benefit from devm_clk_get_enabled() to simplify
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 12/13] iio: frequency: adrf6780: Benefit from devm_clk_get_enabled() to simplify
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 01/13] iio: adc: ad7124: Benefit from devm_clk_get_enabled() to simplify
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 02/13] iio: adc: ad7768-1: Benefit from devm_clk_get_enabled() to simplify
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 07/13] iio: adc: ti-ads131e08: Benefit from devm_clk_get_enabled() to simplify
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 13/13] iio: imu: adis16475: Benefit from devm_clk_get_enabled() to simplify
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 08/13] iio: adc: xilinx-ams: Benefit from devm_clk_get_enabled() to simplify
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 03/13] iio: adc: ad9467: Benefit from devm_clk_get_enabled() to simplify
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 10/13] iio: frequency: adf4371: Benefit from devm_clk_get_enabled() to simplify
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 05/13] iio: adc: lpc18xx: Benefit from devm_clk_get_enabled() to simplify
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 09/13] iio: adc: xilinx-xadc: Benefit from devm_clk_get_enabled() to simplify
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 06/13] iio: adc: rockchip_saradc: Benefit from devm_clk_get_enabled() to simplify
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 04/13] iio: adc: ad9467: Benefit from devm_clk_get_prepared() to simplify
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] dt-bindings: Drop Dan Murphy
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 5/5] dt-bindings: Drop Dan Murphy
  • From: Andrew Davis <afd@xxxxxx>
• Re: [PATCH 5/5] dt-bindings: Drop Dan Murphy
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Nathan Chancellor <nathan@xxxxxxxxxx>
• Re: [PATCH 0/5] iio/hwmon/mfd/leds/net/power/ASoC: dt-bindings: few stale maintainers cleanup
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Nathan Chancellor <nathan@xxxxxxxxxx>
• Re: [PATCH 5/5] dt-bindings: Drop Dan Murphy
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH v3 2/2] dt-bindings: iio: mlx90632 Add supply regulator documentation
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• [PATCH v3 1/2] iio: temperature: mlx90632 Add supply regulator to sensor
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• [PATCH v3 0/2] iio: temperature: mlx90632: Add supply regulator
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• Re: [PATCH 1/4] staging: iio: frequency: ad9832: Fix alignment for DMA safety
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: iio: Drop Joachim Eastwood
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: iio: Drop Bogdan Pricop
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 3/5] dt-bindings: Drop Beniamin Bia and Stefan Popa
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 4/5] dt-bindings: Drop Robert Jones
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 5/5] dt-bindings: Drop Dan Murphy
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: iio: mlx90632 Add supply regulator documentation
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• [PATCH v2 1/2] iio: temperature: mlx90632 Add supply regulator to sensor
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• [PATCH v2 0/2] iio: temperature: mlx90632: Add supply regulator
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• Re: [PATCH v5 14/14] iio: magnetometer: yas530: Add YAS537 variant
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/5] iio: accel: fxls8962af: Use new EXPORT_NS_GPL_DEV_PM_OPS()
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v5 13/14] iio: magnetometer: yas530: Add function pointers to "chip_info"
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 12/14] iio: magnetometer: yas530: Add temperature calculation to "chip_info"
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 11/14] iio: magnetometer: yas530: Add IIO scaling to "chip_info"
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 10/14] iio: magnetometer: yas530: Add volatile registers to "chip_info"
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/2] iio: temp: mlx90632: Switch form UNVIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS()
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• Re: [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/5] PM: core: Add EXPORT_NS_GPL_DEV_PM_OPS to avoid drivers rolling own.
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 07/14] iio: magnetometer: yas530: Move printk %*ph parameters out from stack
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 06/14] iio: magnetometer: yas530: Rename functions and registers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 5/5] dt-bindings: Drop Dan Murphy
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/5] iio: gyro: fxas210002c: Move exports to IIO_FXAS210002C namespace.
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• [PATCH 5/5] dt-bindings: Drop Dan Murphy
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/5] dt-bindings: iio: Drop Bogdan Pricop
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 4/5] dt-bindings: Drop Robert Jones
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/5] dt-bindings: Drop Beniamin Bia and Stefan Popa
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/5] dt-bindings: iio: Drop Joachim Eastwood
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 0/5] iio/hwmon/mfd/leds/net/power/ASoC: dt-bindings: few stale maintainers cleanup
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v7 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] iio: proximity: srf04: Use pm_ptr() to remove unused struct dev_pm_ops
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 4/6] iio: proximity: srf04: Use pm_ptr() to remove unused struct dev_pm_ops
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] iio: proximity: srf04: Use pm_ptr() to remove unused struct dev_pm_ops
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 4/6] iio: proximity: srf04: Use pm_ptr() to remove unused struct dev_pm_ops
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] iio: proximity: srf04: Use pm_ptr() to remove unused struct dev_pm_ops
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 0/5] PM: Introduce EXPORT_NS_GPL_DEV_PM_OPS() and use cases in IIO.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 4/6] iio: proximity: srf04: Use pm_ptr() to remove unused struct dev_pm_ops
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: rzg2l: Use RUNTIME_PM_OPS() instead of SET_*
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: Make use of devm_clk_get_enabled()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 0/2] iio: Convert some drivers from deprecated UNIVERSAL_DEV_PM_OPS()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 0/6] iio: PM macro rework continued.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 4/6] iio: proximity: srf04: Use pm_ptr() to remove unused struct dev_pm_ops
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: adc: mt6360: Drop an incorrect __maybe_unused marking.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 0/2] Trivial cleanup and refactor dev_pm_ops handling.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 0/4] staging: iio: DMA alignment fixes.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/4] staging: iio: frequency: ad9832: Fix alignment for DMA safety
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 3/5] arm64: dts: qcom: Add PM6125 PMIC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 0/2] IIO: Clean up a couple of warnings that snuck in.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 5/5] iio: pressure: bmp280: Add more tunable config parameters for BMP380
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 3/5] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• [PATCH] iio: Make use of devm_clk_get_enabled()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v5 2/5] iio: pressure: bmp280: Fix alignment for DMA safety
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 1/5] iio: pressure: bmp280: simplify driver initialization logic
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v5 14/14] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v5 13/14] iio: magnetometer: yas530: Add function pointers to "chip_info"
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v5 10/14] iio: magnetometer: yas530: Add volatile registers to "chip_info"
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v5 11/14] iio: magnetometer: yas530: Add IIO scaling to "chip_info"
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v5 12/14] iio: magnetometer: yas530: Add temperature calculation to "chip_info"
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v5 09/14] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v5 08/14] iio: magnetometer: yas530: Apply documentation and style fixes
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v5 07/14] iio: magnetometer: yas530: Move printk %*ph parameters out from stack
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v5 06/14] iio: magnetometer: yas530: Rename functions and registers
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v5 05/14] iio: magnetometer: yas530: Change data type of calibration coefficients
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v5 04/14] iio: magnetometer: yas530: Correct temperature handling
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v5 02/14] iio: magnetometer: yas530: Change range of data in volatile register
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v5 03/14] iio: magnetometer: yas530: Correct scaling of magnetic axes
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v5 01/14] iio: magnetometer: yas530: Change data type of hard_offsets to signed
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v5 00/14] Add support for magnetometer Yamaha YAS537
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: Controlling device power management from terminal
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• [PATCH 5/5] iio: imu: inv_mpu: Move exports to IIO_MPU6050 namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 4/5] iio: imu: inv_icm42600: Move exports to IIO_ICM42600 namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/5] iio: accel: fxls8962af: Use new EXPORT_NS_GPL_DEV_PM_OPS()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 3/5] iio: gyro: fxas210002c: Move exports to IIO_FXAS210002C namespace.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/5] PM: core: Add EXPORT_NS_GPL_DEV_PM_OPS to avoid drivers rolling own.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 0/5] PM: Introduce EXPORT_NS_GPL_DEV_PM_OPS() and use cases in IIO.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: adc: rzg2l: Use RUNTIME_PM_OPS() instead of SET_*
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/2] iio: temp: mlx90632: Switch form UNVIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/2] iio: pressure: icp10100: Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS().
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 0/2] iio: Convert some drivers from deprecated UNIVERSAL_DEV_PM_OPS()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] iio: magn: hmc5843: Trivial cleanup and refactor dev_pm_ops handling.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 6/6] iio: light: st_uvis25: Use EXPORT_NS_SIMPLE_DEV_PM_OPS()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 5/6] iio: accel: bmi088: Use EXPORT_NS_GPL_RUNTIME_DEV_PM_OPS() and pm_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 4/6] iio: proximity: srf04: Use pm_ptr() to remove unused struct dev_pm_ops
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 3/6] iio: proximity: sx9360: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/6] iio: proximity: sx9324: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/6] iio: proximity: sx9310: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 0/6] iio: PM macro rework continued.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/2] iio: magn: hmc5843: Move struct dev_pm_ops out of header
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/2] iio: magn: hmc5843: Drop excessive indentation of assignments of hmc5843_driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 0/2] Trivial cleanup and refactor dev_pm_ops handling.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: adc: mt6360: Drop an incorrect __maybe_unused marking.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: test: Mark file local structure arrays static.
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH 4/4] staging: iio: resolver: ad2s1210: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 3/4] staging: iio: meter: ade7854: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/4] staging: iio: frequency: ad9834: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/4] staging: iio: frequency: ad9832: Fix alignment for DMA safety
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 0/4] staging: iio: DMA alignment fixes.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/2] iio: light: cm32181: Mark the dev_pm_ops static.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/2] iio: test: Mark file local structure arrays static.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 0/2] IIO: Clean up a couple of warnings that snuck in.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/9] iio: adc: mcp3911: use correct formula for AD conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: cm3605: Fix an error handling path in cm3605_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 00/17] staging/iio: Clean up AD7746 CDC driver and move from staging.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 11/17] iio: core: Introduce _zeropoint for differential channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 11/17] iio: core: Introduce _zeropoint for differential channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 08/17] staging: iio: cdc: ad7746: Break up use of chan->address and use FIELD_PREP etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 01/17] iio: core: Increase precision of IIO_VAL_FRACTIONAL_LOG2 when possible
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v5 5/5] iio: pressure: bmp280: Add more tunable config parameters for BMP380
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v5 4/5] dt-bindings: iio: pressure: bmp085: Add BMP380 compatible string
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v5 3/5] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v5 2/5] iio: pressure: bmp280: Fix alignment for DMA safety
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v5 1/5] iio: pressure: bmp280: simplify driver initialization logic
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v5 0/5] Add support for pressure sensor Bosch BMP380
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH] iio: light: cm3605: Fix an error handling path in cm3605_probe()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH] HID: mcp2221: add ADC/DAC support via iio subsystem
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 00/15] make iio inkern interface firmware agnostic
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 13/15] iio: adc: stm32-adc: convert to device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 09/15] iio: adc: at91-sama5d2_adc: convert to device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 05/15] iio: inkern: move to fwnode properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 04/15] iio: inkern: split of_iio_channel_get_by_name()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 12/15] iio: adc: qcom-spmi-adc5: convert to device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 13/15] iio: adc: stm32-adc: convert to device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 08/15] iio: adc: ab8500-gpadc: convert to device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 08/15] iio: adc: ab8500-gpadc: convert to device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 05/15] iio: inkern: move to fwnode properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 03/15] iio: inkern: only return error codes in iio_channel_get_*() APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 02/10] dt-bindings: iio: accel: use spi-peripheral-props.yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Controlling device power management from terminal
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: temperature: mlx90632 Add supply regulator to sensor
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] HID: mcp2221: add ADC/DAC support via iio subsystem
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: Add names for function definition arguments.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: temperature: mlx90632 Add supply regulator to sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: add imx93 adc support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: add NULL pointer checks to iio device additional/removal
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] i2c: Use u8 type in i2c transfer calls
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v12 2/3] Input: adc-joystick - Add polled input device support
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/5] iio: adc: qcom-spmi-adc5: Add missing VCOIN/GPIO[134] channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v12 2/3] Input: adc-joystick - Add polled input device support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 00/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 0/9] Improve MCP3911 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v12 3/3] arm64: dts: rockchip: Update joystick to polled for OG2
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v12 2/3] Input: adc-joystick - Add polled input device support
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v12 1/3] dt-bindings: adc-joystick: add poll-interval
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v12 0/3] dt-bindings: adc-joystick: add poll-interval
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v2 1/5] arm64: dts: qcom: pm660: Use unique ADC5_VCOIN address in node name
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v2 5/5] arm64: dts: qcom: sm6125-seine: Configure additional trinket thermistors
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v2 4/5] arm64: dts: qcom: sm6125-seine: Include PM6125 and configure PON
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v2 2/5] iio: adc: qcom-spmi-adc5: Add missing VCOIN/GPIO[134] channels
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v2 3/5] arm64: dts: qcom: Add PM6125 PMIC
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH v2 0/5] Add Qcom PM6125 PMIC, and use in Sony Xperia Seine PDX201
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v7 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 10/13] power: supply: mt6370: Add MediaTek MT6370 charger driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 09/13] iio: adc: mt6370: Add MediaTek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2] dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 13/15] iio: adc: stm32-adc: convert to device properties
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: gyroscope: bosch,bmg160: correct number of pins
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v7 13/13] video: backlight: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v7 11/13] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v7 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v7 10/13] power: supply: mt6370: Add MediaTek MT6370 charger driver
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v7 09/13] iio: adc: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v7 08/13] usb: typec: tcpci_mt6370: Add MediaTek MT6370 tcpci driver
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v7 07/13] mfd: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v7 06/13] dt-bindings: mfd: Add MediaTek MT6370
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v7 05/13] dt-bindings: backlight: Add MediaTek MT6370 backlight
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v7 04/13] dt-bindings: leds: Add MediaTek MT6370 flashlight
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v7 03/13] dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v7 02/13] dt-bindings: power: supply: Add MediaTek MT6370 Charger
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v7 00/13] Add MediaTek MT6370 PMIC support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v7 01/13] dt-bindings: usb: Add MediaTek MT6370 TCPC
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v5 28/33] iio/drivers/sun4i_gpadc: Switch to new of thermal API
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v10 2/3] Input: adc-joystick - Add polled input device support
  • From: Chris Morgan <macromorgan@xxxxxxxxxxx>
• Re: [PATCH v10 2/3] Input: adc-joystick - Add polled input device support
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH v11 1/3] dt-bindings: adc-joystick: add poll-interval
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v11 2/3] Input: adc-joystick - Add polled input device support
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v11 0/3] dt-bindings: adc-joystick: add poll-interval
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v11 3/3] arm64: dts: rockchip: Update joystick to polled for OG2
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• Re: [PATCH v10 2/3] Input: adc-joystick - Add polled input device support
  • From: Chris Morgan <macromorgan@xxxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: Alice Chen <szunichen@xxxxxxxxx>
• Re: [PATCH v2 02/10] dt-bindings: iio: accel: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC
  • From: Bough Chen <haibo.chen@xxxxxxx>
• Re: [PATCH v4 3/3] dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 00/10] dt-bindings: iio: use spi-peripheral-props.yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 02/10] dt-bindings: iio: accel: use spi-peripheral-props.yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v4 10/10] iio: magnetometer: yas530: Add YAS537 variant
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: st_sensors: Retry ID verification on failure
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v2] i2c: Use u8 type in i2c transfer calls
  • From: Jason Gerecke <killertofu@xxxxxxxxx>
• Re: [PATCH v10 2/3] Input: adc-joystick - Add polled input device support
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: add NULL pointer checks to iio device additional/removal
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: add NULL pointer checks to iio device additional/removal
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v10 3/3] arm64: dts: rockchip: Update joystick to polled for OG2
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v10 2/3] Input: adc-joystick - Add polled input device support
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v10 0/3] dt-bindings: adc-joystick: add poll-interval
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v10 1/3] dt-bindings: adc-joystick: add poll-interval
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• Re: [PATCH v9 2/3] Input: adc-joystick - Add polled input device support
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH v9 2/3] Input: adc-joystick - Add polled input device support
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v9 3/3] arm64: dts: rockchip: Update joystick to polled for OG2
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v9 1/3] dt-bindings: adc-joystick: add poll-interval
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v9 0/3] dt-bindings: adc-joystick: add poll-interval
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• Re: [PATCH v8 2/3] Input: adc-joystick - Add polled input device support
  • From: Chris Morgan <macromorgan@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: Use u8 type in i2c transfer calls
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2] i2c: Use u8 type in i2c transfer calls
  • From: Jason Gerecke <killertofu@xxxxxxxxx>
• [PATCH v4 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: vendor-prefixes: add MEMSensing Microsystems Co., Ltd.
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v4 3/3] dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v4 0/3] iio: accel: add MSA311 accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH] iio: add NULL pointer checks to iio device additional/removal
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v2 00/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• [PATCH v3 19/19] iio: adc: at91-sama5d2_adc: add runtime pm support
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 17/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 18/19] iio: adc: at91-sama5d2_adc: add empty line after functions
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 14/19] iio: adc: at91-sama5d2_adc: add startup and tracktim as parameter for at91_adc_setup_samp_freq()
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 15/19] iio: adc: at91-sama5d2_adc: lock around at91_adc_read_info_raw()
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 16/19] dt-bindings: iio: adc: at91-sama5d2_adc: add id for temperature channel
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 13/19] iio: adc: at91-sama5d2_adc: update trackx on emr
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 12/19] iio: adc: at91-sama5d2_adc: move oversampling storage in its function
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 11/19] iio: adc: at91-sama5d2_adc: add 64 and 256 oversampling ratio
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 10/19] iio: adc: at91-sama5d2_adc: adjust osr based on specific platform data
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 09/19] iio: adc: at91-sama5d2_adc: add .read_avail() chan_info ops
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 08/19] iio: adc: at91-sama5d2_adc: drop AT91_OSR_XSAMPLES defines
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 01/19] iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 06/19] iio: adc: at91-sama5d2_adc: handle different EMR.OSR for different hw versions
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 07/19] iio: adc: at91-sama5d2_adc: move the check of oversampling in its function
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 05/19] iio: adc: at91-sama5d2_adc: exit from write_raw() when buffers are enabled
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 03/19] iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 04/19] iio: adc: at91-sama5d2_adc: disable/prepare buffer on suspend/resume
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 02/19] iio: adc: at91-sama5d2_adc: check return status for pressure and touch
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v3 00/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/3] arm64: dts: imx93: add ADC support
  • From: haibo.chen@xxxxxxx
• [PATCH 1/3] iio: adc: add imx93 adc support
  • From: haibo.chen@xxxxxxx
• [PATCH 2/3] dt-bindings: iio: adc: Add binding documentation for NXP IMX93 ADC
  • From: haibo.chen@xxxxxxx
• Re: Controlling device power management from terminal
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: time: capture-tiecap: capture driver support for ECAP
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: mlx90632 Add supply regulator documentation
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: mlx90632 Add supply regulator documentation
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• [PATCH 1/2] iio: temperature: mlx90632 Add supply regulator to sensor
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• [PATCH 0/2] iio: temperature: mlx90632: Add supply regulator
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• Re: [PATCH v2 00/10] dt-bindings: iio: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 27/32] iio/drivers/sun4i_gpadc: Switch to new of thermal API
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 2/2] iio: humidity: hdc100x: add manufacturer and device ID check
  • From: Patrick Williams <patrick@xxxxxxxxx>
• Re: [PATCH v2 00/10] dt-bindings: iio: use spi-peripheral-props.yaml
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v2 00/10] dt-bindings: iio: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 1/3] units: complement the set of Hz units
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v3 3/3] iio: common: scmi_sensors: use HZ macro from units.h
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v3 0/3] units: complement the set of Hz units
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>