From: Haibo Chen <haibo.chen@xxxxxxx> V5: -For ADC driver, use dev_err_probe() to replace dev_err() in dev_err_probe(). -Add imx93_adc_power_down() in the probe error path. -Re-order the function in imx93_adc_remove(), make them inverse in probe(). -Remove the pm_runtime_get_sync(dev) in imx93_adc_remove(), because this driver enable the pm_runtime autosuspend feature, and config the delay as 50ms. So when called imx93_adc_remove(), this device still in runtime resume state, no need to force resume the device back. -no changes for binding doc and dts. V4: For ADC driver, re-define the ADC status show the relation to specific register bit. Redo the imx93_adc_remove(), change the return error sequence in imx93_adc_read_raw(), and use a direct string for indio_dev->name. For dt-bings, change the commit title and add maintainer's reviewed by tag For dts, no change. V3: For dt-bings, add some change according to review comments, and pass dt_binding_check. For dts, add #io-channel-cells = <1>; to pass dtbs_check For ADC driver, no change. V2: For ADC driver, add change according to matainer's commets. Haibo Chen (3): iio: adc: add imx93 adc support dt-bindings: iio: adc: Add NXP IMX93 ADC arm64: dts: imx93: add ADC support .../bindings/iio/adc/nxp,imx93-adc.yaml | 81 +++ MAINTAINERS | 4 +- .../boot/dts/freescale/imx93-11x11-evk.dts | 12 + arch/arm64/boot/dts/freescale/imx93.dtsi | 13 + drivers/iio/adc/Kconfig | 10 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/imx93_adc.c | 477 ++++++++++++++++++ 7 files changed, 597 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml create mode 100644 drivers/iio/adc/imx93_adc.c -- 2.34.1
