MFD, regulator and ADC driver and related bindings for MAX77540/MAX77541.
The patches are requeired to be applied in sequence.
Changes in v3:
* Patch 1: "drivers: mfd: Add ADI MAX77541/MAX77540 PMIC Support"
* Change struct name from max77541_dev to max77541
* Adjust max-line-length lower than 80
* Patch 2: "dt-bindings: mfd: Add ADI MAX77541/MAX77540"
* Remove adc object as we do not need
* Remove adc node from example
* Patch 3: "drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support"
* Change node name from "BUCK#_id" to "buck#_id" in regulator desc
* Patch 4: "dt-bindings: regulator: Add ADI MAX77541/MAX77540 Regulator"
* Change node name from "BUCK" to "buck" in regulators
* Patch 5: "drivers: iio: adc: Add ADI MAX77541 ADC Support"
* Convert voltage values from V to mV for scaling.
* Convert temperature values from C to miliC for scale and offset
* Do not set offset bit in info_mask_separate for voltage that does not need offset
* Remove unnecessary dev_get_drvdata() instead of it use dev_get_regmap to have regmap.
* Assing hard coded name for adc dev name
Changes in v2:
* Patch 1: "drivers: mfd: Add MAX77541/MAX77540 PMIC Support"
* Drop "this patch adds" from commit message.
* Drop redundant blank lines.
* Drop module version
* Use definition for parameter of devm_mfd_add_devices(.., -1,..)
* Use desc in chip_info to adding desc for different devices.
* Add missing headers and forward declarations.
* Drop unused elements from max77541_dev struct
* Add chip_info into max77541_dev struct to identify different devices.
* Patch 2: "dt-bindings: mfd: adi,max77541.yaml Add MAX77541 bindings"
* Drop "this patch adds" from commit message.
* Fix $ref path
* Drop adc part under allOf
* Keep only one example (more complex one)
* Fix make dt_binding_check errors.(trailing space, No newline)
* Patch 3: "drivers: regulator: Add MAX77541 Regulator Support"
* Drop "this patch adds" from commit message.
* Add trailing comma for required structs.
* Fix wrong indentation.
* Drop redundant blank lines.
* Drop max77541_regulator_dev struct.
* Use "regulator_desc *desc" for both regulator
regarding to "max77541->id"
* Patch 4: "dt-bindings: regulator: max77541-regulator.yaml Add MAX77541
Regulator bindings"
* Drop "this patch adds" from commit message.
* Chance filename (matching compatible), so adi,max77541-regulator.yaml
* Fix make dt_binding_check errors.(trailing space, No newline)
* Patch 5: "drivers: iio: adc: Add MAX77541 ADC Support"
* Drop "this patch adds" from commit message.
* Drop redundant blank lines.
* Fix wrong include path.
* Use switch instead of if-else for range setting in max77541_adc_scale
* Move max77541_adc_range enum from max77541.h to here.
* Use definition from units.h
* Drop unused elements from max77541_adc_iio struct
* Drop the .data from platform_device_id
Okan Sahin (5):
drivers: mfd: Add ADI MAX77541/MAX77540 PMIC Support
dt-bindings: mfd: Add ADI MAX77541/MAX77540
drivers: regulator: Add ADI MAX77541/MAX77540 Regulator Support
dt-bindings: regulator: Add ADI MAX77541/MAX77540 Regulator
drivers: iio: adc: Add ADI MAX77541 ADC Support
.../devicetree/bindings/mfd/adi,max77541.yaml | 87 ++++++
.../regulator/adi,max77541-regulator.yaml | 44 +++
MAINTAINERS | 11 +
drivers/iio/adc/Kconfig | 11 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/max77541-adc.c | 200 ++++++++++++++
drivers/mfd/Kconfig | 13 +
drivers/mfd/Makefile | 1 +
drivers/mfd/max77541.c | 250 ++++++++++++++++++
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/max77541-regulator.c | 160 +++++++++++
include/linux/mfd/max77541.h | 108 ++++++++
13 files changed, 896 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/adi,max77541.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml
create mode 100644 drivers/iio/adc/max77541-adc.c
create mode 100644 drivers/mfd/max77541.c
create mode 100644 drivers/regulator/max77541-regulator.c
create mode 100644 include/linux/mfd/max77541.h
--
2.30.2
