Linux IIO Development

• Thread Index

• [PATCH v5 3/8] iio: adc: mp2629: fix potential array out of bound access
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v5 4/8] power: supply: fix wrong interpretation of register value
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v5 2/8] mfd: mp2629: fix failed to get iio channel by device name
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v5 0/8] Add support for mp2733 battery charger
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v5 1/8] iio: adc: mp2629: fix wrong comparison of channel
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• Re: [PATCH] staging: iio: ad5933: Use div64_ul instead of do_div
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings:iio:accel: Add docs for ADXL359
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 5/8] power: supply: mp2629: Add USB fast charge settings
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v4 4/8] power: supply: Add support for mp2733 battery charger
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v4 6/8] power: supply: fix failed to get iio channel by device name
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH] iio: accel: bma400: Ensure VDDIO is enable defore reading the chip ID.
  • From: Dan Robertson <dan@xxxxxxxxxxxxxxx>
• [PATCH 0/2] Add ADXL359 support
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH 2/2] drivers:iio:accel: Add support for ADXL359 device
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings:iio:accel: Add docs for ADXL359
  • From: Ramona Bolboaca <ramona.bolboaca@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: introduce sw trigger support
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• RE: [PATCH v2] staging: iio: frequency: ad9834: Use div64_ul instead of do_div
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• RE: [PATCH] staging: iio: frequency: ad9834: Use div64_ul instead of do_div
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• RE: [PATCH] staging: iio: frequency: ad9832: Use div64_ul instead of do_div
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• RE: [PATCH] staging: iio: ad5933: Use div64_ul instead of do_div
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: adc: twl4030-madc: add missing of.h include
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH v2] staging: iio: frequency: ad9834: Use div64_ul instead of do_div
  • From: Deepak R Varma <drv@xxxxxxxxx>
• [PATCH] staging: iio: frequency: ad9832: Use div64_ul instead of do_div
  • From: Deepak R Varma <drv@xxxxxxxxx>
• [PATCH] staging: iio: frequency: ad9834: Use div64_ul instead of do_div
  • From: Deepak R Varma <drv@xxxxxxxxx>
• [PATCH] staging: iio: ad5933: Use div64_ul instead of do_div
  • From: Deepak R Varma <drv@xxxxxxxxx>
• [PATCH v5 4/5] counter: Add RZ/G2L MTU3 counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v5 3/5] Documentation: ABI: sysfs-bus-counter: add external_input_phase_clock_select & long_word_access_ctrl_mode items
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: adc: qcom,spmi-vadc: extend example
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: adc: qcom,spmi-vadc: simplify compatible enum
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: Removing the last of IIO_COUNT (stm32-timer-trigger)
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: iio: temperature: ltc2983: refine
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• Re: [PATCH v3 3/4] dt-bindings: iio: temperature: ltc2983: support more parts
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: iio: temperature: ltc2983: refine
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PULL] First set of Counter fixes for 6.1 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] PM: runtime: Synchronize PM runtime enable state with parent
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• RE: [PATCH v4 3/4] mfd: Add RZ/G2L MTU3 counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v4 3/4] mfd: Add RZ/G2L MTU3 counter driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v3 3/4] dt-bindings: iio: temperature: ltc2983: support more parts
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v3 4/4] iio: temperature: ltc2983: support more parts
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v3 2/4] dt-bindings: iio: temperature: ltc2983: refine
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v3 1/4] iio: temperature: ltc2983: make bulk write buffer DMA-safe
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v3 0/4] Support more parts in LTC2983
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• RE: [PATCH v5] iio: temperature: Add driver support for Maxim MAX30208
  • From: "Khandelwal, Rajat" <rajat.khandelwal@xxxxxxxxx>
• Re: [PATCH v4 2/3] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [RFC PATCH v2 4/5] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v4 7/8] iio: adc: mp2629: fix potential array out of bound access
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• Re: [PATCH v5] iio: temperature: Add driver support for Maxim MAX30208
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v4 0/8] Add support for mp2733 battery charger
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v6] iio: temperature: Add driver support for Maxim MAX30208
  • From: Rajat Khandelwal <rajat.khandelwal@xxxxxxxxxxxxxxx>
• [PATCH v4 8/8] power: supply: fix wrong interpretation of register value
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• Re: [PATCH v5 2/3] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PULL] First set of Counter fixes for 6.1 cycle
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• RE: [PATCH v5] iio: temperature: Add driver support for Maxim MAX30208
  • From: "Khandelwal, Rajat" <rajat.khandelwal@xxxxxxxxx>
• Re: [PATCH 00/21] ARM: s3c: clean out obsolete platforms
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH v2 3/5] dt-bindings: iio: temperature: ltc2983: refine
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v5 0/3] iio: Support ROHM/Kionix kx022a
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v4 8/8] power: supply: fix wrong interpretation of register value
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v5 3/3] MAINTAINERS: Add KX022A maintainer entry
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v4 2/8] mfd: mp2629: Add support for mps mp2733 battery charger
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• Re: [PATCH v4 6/8] power: supply: fix failed to get iio channel by device name
  • From: saravanan sekar <sravanhome@xxxxxxxxx>
• Re: [PATCH v4 6/8] power: supply: fix failed to get iio channel by device name
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v4 4/8] power: supply: Add support for mp2733 battery charger
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• Re: [PATCH v4 8/8] power: supply: fix wrong interpretation of register value
  • From: saravanan sekar <sravanhome@xxxxxxxxx>
• [PATCH v5 1/3] dt-bindings: iio: Add KX022A accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v4 6/8] power: supply: fix failed to get iio channel by device name
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• Re: [PATCH v4 8/8] power: supply: fix wrong interpretation of register value
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 8/8] power: supply: fix wrong interpretation of register value
  • From: saravanan sekar <sravanhome@xxxxxxxxx>
• [PATCH v4 5/8] power: supply: mp2629: Add USB fast charge settings
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v5 2/3] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v4 8/8] power: supply: fix wrong interpretation of register value
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v4 1/8] iio: adc: mp2629: fix wrong comparison of channel
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v4 3/8] iio: adc: mp2629: restrict input voltage mask for mp2629
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• Re: [PATCH v5 2/3] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 00/21] ARM: s3c: clean out obsolete platforms
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: renesas,rcar-gyroadc: Miscellaneous improvements
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 10/23] iio: accel: kxcjk-1013: Convert to i2c's .probe_new
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/3] MAINTAINERS: Add KX022A maintainer entry
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH] dt-bindings: iio: adc: renesas,rcar-gyroadc: Miscellaneous improvements
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v5] iio: temperature: Add driver support for Maxim MAX30208
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 3/3] MAINTAINERS: Add KX022A maintainer entry
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v4 3/3] MAINTAINERS: Add KX022A maintainer entry
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH -next] iio: trigger: sysfs: rename error label in iio_sysfs_trigger_probe()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH v4 3/3] MAINTAINERS: Add KX022A maintainer entry
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH v3] iio: temperature: mlx90632 Style alignment for the driver
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• Re: [PATCH 10/23] iio: accel: kxcjk-1013: Convert to i2c's .probe_new
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v2] iio: temperature: mlx90632 Style alignment for the driver
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• Re: [PATCH 10/23] iio: accel: kxcjk-1013: Convert to i2c's .probe_new
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: temperature: mlx90632 Style alignment for the driver
  • From: Marion & Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v4 0/8] iio: stm32-adc: add support of adc for stm32mp13
  • From: Alexandre TORGUE <alexandre.torgue@xxxxxxxxxxx>
• Re: [PATCH 10/23] iio: accel: kxcjk-1013: Convert to i2c's .probe_new
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: ms5611: changed hardcoded SPI speed to value limited
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH] iio: adc: at91_adc: fix possible memory leak in at91_adc_allocate_trigger()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH 10/23] iio: accel: kxcjk-1013: Convert to i2c's .probe_new
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: temperature: mlx90632 Style alignment for the driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] iio: temperature: mlx90632 Style alignment for the driver
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v4 3/3] MAINTAINERS: Add KX022A maintainer entry
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 10/23] iio: accel: kxcjk-1013: Convert to i2c's .probe_new
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v4 3/3] MAINTAINERS: Add KX022A maintainer entry
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: ms5611: changed hardcoded SPI speed to value limited
  • From: Mitja Špes <mitja@xxxxxxxxx>
• Re: [PATCH v2 1/3] iio: pressure: ms5611: fixed value compensation bug
  • From: Mitja Špes <mitja@xxxxxxxxx>
• RE: [PATCH v2 5/5] iio: temperature: ltc2983: support more parts
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• RE: [PATCH v2 2/5] iio: temperature: ltc2983: make bulk write buffer DMA-safe
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: iio: dac: Change the I2C slave address for ds4422/4424 to its correct value
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 17/23] iio: accel: mma9553: Convert to i2c's .probe_new
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 16/23] iio: accel: mma9551: Convert to i2c's .probe_new
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 10/23] iio: accel: kxcjk-1013: Convert to i2c's .probe_new
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [PATCH v3] dt-bindings: iio: dac: Change the I2C slave address for ds4422/4424 to its correct value
  • From: Rajat Khandelwal <rajat.khandelwal@xxxxxxxxxxxxxxx>
• [PATCH v5] iio: temperature: Add driver support for Maxim MAX30208
  • From: Rajat Khandelwal <rajat.khandelwal@xxxxxxxxxxxxxxx>
• Re: [PULL] 1st set of IIO fixes for 6.1
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/5] dt-bindings: iio: temperature: ltc2983: refine
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH 17/23] iio: accel: mma9553: Convert to i2c's .probe_new
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 16/23] iio: accel: mma9551: Convert to i2c's .probe_new
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 21/23] iio: accel: stk8ba50: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 14/23] iio: accel: mma7660: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 01/23] iio: accel: adxl367: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 10/23] iio: accel: kxcjk-1013: Convert to i2c's .probe_new
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 12/23] iio: accel: mc3230: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 04/23] iio: accel: bmc150: Convert to i2c's .probe_new
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 13/23] iio: accel: mma7455: Convert to i2c's .probe_new
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 03/23] iio: accel: bma400: Convert to i2c's .probe_new
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 11/23] iio: accel: kxsd9: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 20/23] iio: accel: stk8312: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 02/23] iio: accel: adxl372: Convert to i2c's .probe_new
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 23/23] iio: accel: vl6180: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 18/23] iio: accel: mxc4005: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 08/23] iio: accel: dmard09: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 15/23] iio: accel: mma8452: Convert to i2c's .probe_new
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 00/23] iio: accel: Convert to i2c's .probe_new
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 05/23] iio: accel: da280: Convert to i2c's .probe_new
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 19/23] iio: accel: mxc6255: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 09/23] iio: accel: dmard10: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 06/23] iio: accel: da311: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 22/23] iio: accel: st_magn: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 07/23] iio: accel: dmard06: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 00/14] IIO: More devm_regulator[_bulk]_get_enable() users
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/5] iio: temperature: ltc2983: support more parts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/5] dt-bindings: iio: temperature: ltc2983: refine
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/5] iio: temperature: ltc2983: make bulk write buffer DMA-safe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/5] iio: temperature: ltc2983: allocate iio channels once
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: frequency: ad9834: merge unnecessary split lines
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: sun4i-gpadc-iio: Fix PM disable depth imbalance in sun4i_gpadc_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: sun4i-gpadc-iio: Fix error handle when devm_iio_device_register() failed in sun4i_gpadc_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: at91-sama5d2_adc: get rid of 5 degrees Celsius adjustment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] iio: temperature: Add driver support for Maxim MAX30208
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: temperature: Add driver support for Maxim MAX30208
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v10 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: iio: pressure: meas,ms5611: add max SPI frequency to the example
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: ms5611: changed hardcoded SPI speed to value limited
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: ms5611: changed hardcoded SPI speed to value limited
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: pressure: ms5611: fixed value compensation bug
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: trigger: sysfs: fix possible memory leak in iio_sysfs_trig_init()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] 1st set of IIO fixes for 6.1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 12/15] iio: fyro: itg3200_core: do not use internal iio_dev lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 00/21] ARM: s3c: clean out obsolete platforms
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH 00/21] ARM: s3c: clean out obsolete platforms
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] counter: 104-quad-8: Fix race getting function mode and direction
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [PATCH v2] counter: microchip-tcb-capture: Handle Signal1 read and Synapse
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] iio: trigger: sysfs: fix possible memory leak in iio_sysfs_trig_init()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 00/21] ARM: s3c: clean out obsolete platforms
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: ms5611: changed hardcoded SPI speed to value limited
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: iio: pressure: meas,ms5611: add max SPI frequency to the example
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 3/3] dt-bindings: iio: pressure: meas,ms5611: add max SPI frequency to the example
  • From: Mitja Spes <mitja@xxxxxxxxx>
• [PATCH v2 2/3] iio: pressure: ms5611: changed hardcoded SPI speed to value limited
  • From: Mitja Spes <mitja@xxxxxxxxx>
• [PATCH v2 1/3] iio: pressure: ms5611: fixed value compensation bug
  • From: Mitja Spes <mitja@xxxxxxxxx>
• [PATCH v2 0/3] ms5611 sensor value bug fix; dt-binding fix
  • From: Mitja Spes <mitja@xxxxxxxxx>
• Re: [PATCH v4 2/3] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v4 2/3] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/3] HID: mcp2221: change 'select GPIOLIB' to imply
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH v6 2/3] HID: mcp2221: change 'select GPIOLIB' to imply
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v6 2/3] HID: mcp2221: change 'select GPIOLIB' to imply
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• [PATCH v4 3/3] MAINTAINERS: Add KX022A maintainer entry
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v4 2/3] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: iio: Add KX022A accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v4 0/3] iio: Support ROHM/Kionix kx022a
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v10 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v10 1/2] dt-bindings: iio: adc: add AD4130
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v10 0/2] AD4130
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: adc: mediatek,mt2701-auxadc: new 32k clock
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: adc: mediatek,mt2701-auxadc: new 32k clock
  • From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
• Re: [PATCH v9 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] staging: iio: Use div64_ul instead of do_div
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Remove "status" from schema examples, again
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] counter: 104-quad-8: Fix race getting function mode and direction
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: Add KX022A accelerometer
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 3/5] dt-bindings: iio: temperature: ltc2983: refine
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 1/2] iio: adc: sun4i-gpadc-iio: Fix PM disable depth imbalance in sun4i_gpadc_probe()
  • From: Zhang Qilong <zhangqilong3@xxxxxxxxxx>
• [PATCH v2 0/2] iio: adc: sun4i-gpadc-iio: Fix error handle in sun4i_gpadc_probe()
  • From: Zhang Qilong <zhangqilong3@xxxxxxxxxx>
• [PATCH v2 2/2] iio: adc: sun4i-gpadc-iio: Fix error handle when devm_iio_device_register() failed in sun4i_gpadc_probe()
  • From: Zhang Qilong <zhangqilong3@xxxxxxxxxx>
• Re: [PATCH v3 0/3] iio: Support ROHM/Kionix kx022a
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 3/3] doc: iio: pressure: ms5611: added max SPI frequency setting to the example
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 0/3] iio: Support ROHM/Kionix kx022a
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 2/3] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 3/3] MAINTAINERS: Add KX022A maintainer entry
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: iio: Add KX022A accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2] i2c: Use u8 type in i2c transfer calls
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH] iio: adc: at91-sama5d2_adc: get rid of 5 degrees Celsius adjustment
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 5/5] iio: temperature: ltc2983: support more parts
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v2 4/5] dt-bindings: iio: temperature: ltc2983: support more parts
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v2 2/5] iio: temperature: ltc2983: make bulk write buffer DMA-safe
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v2 3/5] dt-bindings: iio: temperature: ltc2983: refine
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v2 1/5] iio: temperature: ltc2983: allocate iio channels once
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v2 0/5] Support more parts in LTC2983
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: adc: mediatek,mt2701-auxadc: new 32k clock
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] doc: iio: pressure: ms5611: added max SPI frequency setting to the example
  • From: Mitja Špes <mitja@xxxxxxxxx>
• Re: [PATCH 3/3] doc: iio: pressure: ms5611: added max SPI frequency setting to the example
  • From: Mitja Špes <mitja@xxxxxxxxx>
• Re: [PATCH v2] i2c: Use u8 type in i2c transfer calls
  • From: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: Use u8 type in i2c transfer calls
  • From: Jason Gerecke <killertofu@xxxxxxxxx>
• Re: [PATCH v2] i2c: Use u8 type in i2c transfer calls
  • From: Wolfram Sang <wsa-dev@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v4] iio: temperature: Add driver support for Maxim MAX30208
  • From: Rajat Khandelwal <rajat.khandelwal@xxxxxxxxxxxxxxx>
• [PATCH v3] iio: temperature: Add driver support for Maxim MAX30208
  • From: Rajat Khandelwal <rajat.khandelwal@xxxxxxxxxxxxxxx>
• [kbuild] Re: [PATCH v2] iio: temperature: Add driver support for Maxim MAX30208
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 3/3] doc: iio: pressure: ms5611: added max SPI frequency setting to the example
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/2] iio: adc: mt6577_auxadc: add optional 32k clock
  • From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: adc: mediatek,mt2701-auxadc: new 32k clock
  • From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
• [PATCH 1/3] iio: pressure: ms5611: fixed value compensation bug
  • From: Mitja Spes <mitja@xxxxxxxxx>
• [PATCH 2/3] iio: pressure: ms5611: changed hardcoded SPI speed to value limited
  • From: Mitja Spes <mitja@xxxxxxxxx>
• [PATCH 3/3] doc: iio: pressure: ms5611: added max SPI frequency setting to the example
  • From: Mitja Spes <mitja@xxxxxxxxx>
• Re: [PATCH 1/3] iio: pressure: ms5611: fixed value compensation bug
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 3/3] doc: iio: pressure: ms5611: added max SPI frequency setting to the example
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] staging: iio: Use div64_ul instead of do_div
  • From: Kang Minchul <tegongkang@xxxxxxxxx>
• Re: [PATCH 12/14] iio: proximity: sx_common: Use devm_regulator_bulk_get_enable()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v6 00/13] Add support for AXP192 PMIC
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH 05/14] iio: accel: msa311: Use devm_regulator_get_enable()
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v6 3/3] HID: mcp2221: add ADC/DAC support via iio subsystem
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [RFC PATCH v2 4/5] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 00/13] Add support for AXP192 PMIC
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2] counter: microchip-tcb-capture: Handle Signal1 read and Synapse
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v2] iio: temperature: Add driver support for Maxim MAX30208
  • From: Rajat Khandelwal <rajat.khandelwal@xxxxxxxxxxxxxxx>
• Re: [PATCH] counter: microchip-tcb-capture: Handle Signal1 read and Synapse
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: Handling Signal1 in microchip-tcb-capture
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [RFC PATCH v2 4/5] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH v2 4/5] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH] counter: microchip-tcb-capture: Handle Signal1 read and Synapse
  • From: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
• Re: Handling Signal1 in microchip-tcb-capture
  • From: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: temperature: ltc2983: support more parts
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: (subset) [PATCH v8 1/5] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: temperature: ltc2983: support more parts
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: temperature: ltc2983: support more parts
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 00/13] Add support for AXP192 PMIC
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH v4 3/4] mfd: Add RZ/G2L MTU3 counter driver
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH] counter: microchip-tcb-capture: Handle Signal1 read and Synapse
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: Handling Signal1 in microchip-tcb-capture
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• RE: [PATCH v4 3/4] mfd: Add RZ/G2L MTU3 counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v6 00/13] Add support for AXP192 PMIC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Handling Signal1 in microchip-tcb-capture
  • From: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
• Re: [PATCH v4 3/4] mfd: Add RZ/G2L MTU3 counter driver
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH 05/10] iio: imu: Replace spi->chip_select references to spi->chip_select[0]
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 03/10] net: Replace spi->chip_select references to spi->chip_select[0]
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: Handling Signal1 in microchip-tcb-capture
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Remove "status" from schema examples, again
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH 10/10] spi: spi-zynqmp-gqspi: Add parallel memories support in GQSPI driver
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH 09/10] mtd: spi-nor: Add parallel memories support in spi-nor
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH 08/10] spi: Add parallel memories support in SPI core
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH 07/10] spi: spi-zynqmp-gqspi: Add stacked memories support in GQSPI driver
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH 06/10] mtd: spi-nor: Add stacked memories support in spi-nor
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH 05/10] iio: imu: Replace spi->chip_select references to spi->chip_select[0]
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH 04/10] mtd: devices: Replace spi->chip_select references to spi->chip_select[0]
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH 03/10] net: Replace spi->chip_select references to spi->chip_select[0]
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH 02/10] spi: Replace all spi->chip_select & spi->cs_gpiod references with array
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH 01/10] spi: Add stacked memories support in SPI core
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• [PATCH 00/10] spi: Add support for stacked/parallel memories
  • From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xxxxxxx>
• RE: [PATCH 00/14] IIO: More devm_regulator[_bulk]_get_enable() users
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: temperature: ltc2983: support more parts
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: temperature: ltc2983: support more parts
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: temperature: ltc2983: support more parts
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: temperature: ltc2983: support more parts
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: temperature: ltc2983: support more parts
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: Handling Signal1 in microchip-tcb-capture
  • From: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: temperature: ltc2983: support more parts
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 03/14] iio: accel: fxls8962af: Use devm_regulator_get_enable()
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH] staging: iio: frequency: ad9834: merge unnecessary split lines
  • From: Deepak R Varma <drv@xxxxxxxxx>
• Re: [PATCH] dt-bindings: Remove "status" from schema examples, again
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
• Re: [PATCH 09/14] iio: humidity: hts211: Use devm_regulator_get_enable()
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] staging: iio: frequency: ad9834: merge unnecessary split lines
  • From: Julia Lawall <julia.lawall@xxxxxxxx>
• Re: [PATCH v9 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: temperature: ltc2983: support more parts
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• Re: [PATCH 3/3] iio: temperature: ltc2983: support more parts
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: temperature: ltc2983: support more parts
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• Re: [PATCH 14/14] iio: pressure: ms5611: Switch to fully devm_ managed registration.
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 13/14] iio: pressure: ms5611: Use devm_regulator_get_enable()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 13/14] iio: pressure: ms5611: Use devm_regulator_get_enable()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 12/14] iio: proximity: sx_common: Use devm_regulator_bulk_get_enable()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 11/14] iio: light: noa1305: Use devm_regulator_get_enable()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 10/14] iio: light: ltr501: Use devm_regulator_bulk_get_enable()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 10/14] iio: light: ltr501: Use devm_regulator_bulk_get_enable()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 09/14] iio: humidity: hts211: Use devm_regulator_get_enable()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 08/14] iio: frequency: ad9523: Use devm_regulator_get_enable()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 07/14] iio: st_sensors: core and lsm9ds0 switch to devm_regulator_bulk_get_enable()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 04/14] iio: accel: kxcjk-1013: Use devm_regulator_bulk_get_enable()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 03/14] iio: accel: fxls8962af: Use devm_regulator_get_enable()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 02/14] iio: accel: bma400: Use devm_regulator_bulk_get_enable()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 06/14] iio: cdc: ad7150: Use devm_regulator_get_enable()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 01/14] iio: accel: adxl367: Use devm_regulator_bulk_get_enable()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH] dt-bindings: Remove "status" from schema examples, again
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v3 11/14] iio: ad7606: simplify using devm_regulator_get_enable()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v3 08/14] iio: bmg160_core: Simplify using devm_regulator_*get_enable()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: temperature: ltc2983: support more parts
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 00/13] Add support for AXP192 PMIC
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v6 13/13] power: axp20x_battery: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v6 12/13] power: axp20x_battery: Support battery status without fuel gauge
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v6 11/13] power: axp20x_battery: Add constant charge current table
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v6 09/13] iio: adc: axp20x_adc: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v6 10/13] power: supply: axp20x_usb_power: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v6 08/13] iio: adc: axp20x_adc: Replace adc_en2 flag with adc_en2_mask field
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v6 07/13] iio: adc: axp20x_adc: Minor code cleanups
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v6 06/13] regulator: axp20x: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v6 04/13] dt-bindings: power: axp20x-battery: Add AXP192 compatible
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v6 03/13] dt-bindings: power: supply: axp20x: Add AXP192 compatible
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v6 05/13] mfd: axp20x: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v6 02/13] dt-bindings: iio: adc: axp209: Add AXP192 compatible
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v6 01/13] dt-bindings: mfd: add bindings for AXP192 MFD device
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v6 00/13] Add support for AXP192 PMIC
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH 1/5] iio: adc: cc10001: Add local struct device *dev variable to avoid repitition
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/5] iio: adc: cc10001: Add devm_add_action_or_reset() to disable regulator.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 0/5] iio: adc: cc10001: Devm conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 5/5] iio: adc: cc10001: Switch remaining IIO calls in probe to devm_ forms.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 4/5] iio: adc: cc10001: Use devm_ to call device power down.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 3/5] iio: adc: cc10001: Use devm_clk_get_enabled() to avoid boilerplate.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] Synchronize PM runtime enable state with parent
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] tools: iio: iio_utils: fix digit calculation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 13/14] iio: max1363: simplify using devm_regulator_get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 14/14] iio: pressure: ms5611: Switch to fully devm_ managed registration.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 13/14] iio: pressure: ms5611: Use devm_regulator_get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 12/14] iio: proximity: sx_common: Use devm_regulator_bulk_get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 11/14] iio: light: noa1305: Use devm_regulator_get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 10/14] iio: light: ltr501: Use devm_regulator_bulk_get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 09/14] iio: humidity: hts211: Use devm_regulator_get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 08/14] iio: frequency: ad9523: Use devm_regulator_get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 07/14] iio: st_sensors: core and lsm9ds0 switch to devm_regulator_bulk_get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 06/14] iio: cdc: ad7150: Use devm_regulator_get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 05/14] iio: accel: msa311: Use devm_regulator_get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 04/14] iio: accel: kxcjk-1013: Use devm_regulator_bulk_get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 03/14] iio: accel: fxls8962af: Use devm_regulator_get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 02/14] iio: accel: bma400: Use devm_regulator_bulk_get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 01/14] iio: accel: adxl367: Use devm_regulator_bulk_get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 00/14] IIO: More devm_regulator[_bulk]_get_enable() users
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 11/14] iio: ad7606: simplify using devm_regulator_get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 14/14] iio: hmc425a: simplify using devm_regulator_get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 13/14] iio: max1363: simplify using devm_regulator_get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 12/14] iio: max1241: simplify using devm_regulator_get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 11/14] iio: ad7606: simplify using devm_regulator_get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 10/14] iio: ad7476: simplify using devm_regulator_get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 09/14] iio: st_lsm6dsx: Simplify using devm_regulator_*get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 08/14] iio: bmg160_core: Simplify using devm_regulator_*get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 07/14] iio: ltc2688: Simplify using devm_regulator_*get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 06/14] iio: ad7192: Simplify using devm_regulator_get_enable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Removing the last of IIO_COUNT (stm32-timer-trigger)
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v3 04/10] iio: at91-sama5d2_adc: Fix unsafe buffer attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 03/10] iio: bmc150-accel-core: Fix unsafe buffer attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 02/10] iio: adxl372: Fix unsafe buffer attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 01/10] iio: adxl367: Fix unsafe buffer attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• RE: [PATCH] iio: temperature: Add driver support for Maxim MAX30208
  • From: "Khandelwal, Rajat" <rajat.khandelwal@xxxxxxxxx>
• Re: [PATCH v2 0/5] IIO: Use EXPORT_NS_GPL_DEV_PM_OPS()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5] iio: pressure: mpl115: Implementing low power mode by shutdown gpio
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Remove "status" from schema examples, again
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: temperature: ltc2983: allocate iio channels once
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: bno055: uninitialized variable bug in bno055_trigger_handler()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] §tools: iio: iio_generic_buffer: Fix read size
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/4] Make 'mlock' really private
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 0/8] iio: stm32-adc: add support of adc for stm32mp13
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/8] iio: adc: stm32-adc: fix channel sampling time init
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: introduce st_lsm6dsx_device_set_enable routine
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: mcp3911: mask out device ID in debug prints
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: mcp3911: use correct id bits
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v14 1/3] iio: adc: mt6370: Add MediaTek MT6370 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Remove "status" from schema examples, again
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Handling Signal1 in microchip-tcb-capture
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH] dt-bindings: Remove "status" from schema examples, again
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: temperature: ltc2983: support more parts
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: temperature: ltc2983: support more parts
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: health: max30102: do not use internal iio_dev lock
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: temperature: ltc2983: allocate iio channels once
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: temperature: ltc2983: allocate iio channels once
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH v2 4/5] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH v2 4/5] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH v2 4/5] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: temperature: Add driver support for Maxim MAX30208
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v4 0/8] iio: stm32-adc: add support of adc for stm32mp13
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH v4 5/8] ARM: dts: stm32: add adc support to stm32mp13
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [RFC PATCH v2 1/5] regulator: Add devm helpers for get and enable
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH 3/3] iio: temperature: ltc2983: support more parts
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH 2/3] dt-bindings: iio: temperature: ltc2983: support more parts
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH 1/3] iio: temperature: ltc2983: allocate iio channels once
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH 0/3] Support more parts in LTC2983
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• RE: [PATCH] iio: imu: bno055: uninitialized variable bug in bno055_trigger_handler()
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• [PATCH] iio: imu: bno055: uninitialized variable bug in bno055_trigger_handler()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: health: max30102: do not use internal iio_dev lock
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH] §tools: iio: iio_generic_buffer: Fix read size
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v3 2/4] iio: health: max30100: do not use internal iio_dev lock
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] counter: ti-ecap-capture: fix IS_ERR() vs NULL check
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH] tools: iio: iio_utils: fix digit calculation
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• RE: [PATCH v3 4/4] counter: Add RZ/G2L MTU3 counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] counter: Add RZ/G2L MTU3 counter driver
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v3 4/4] counter: Add RZ/G2L MTU3 counter driver
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: health: max30102: do not use internal iio_dev lock
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v3 0/4] Make 'mlock' really private
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/4] iio: health: max30100: do not use internal iio_dev lock
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 1/4] iio: core: introduce iio_device_{claim|release}_buffer_mode() APIs
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] counter: ti-ecap-capture: fix IS_ERR() vs NULL check
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH v4 2/8] dt-bindings: iio: adc: stm32-adc: add stm32mp13 compatibles
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] counter: ti-ecap-capture: fix IS_ERR() vs NULL check
  • From: Julien Panis <jpanis@xxxxxxxxxxxx>
• [PATCH v3 1/4] iio: core: introduce iio_device_{claim|release}_buffer_mode() APIs
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v3 3/4] iio: health: max30102: do not use internal iio_dev lock
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v3 4/4] iio: core: move 'mlock' to 'struct iio_dev_opaque'
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v3 0/4] Make 'mlock' really private
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v3 2/4] iio: health: max30100: do not use internal iio_dev lock
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH] iio: temperature: Add driver support for Maxim MAX30208
  • From: Rajat Khandelwal <rajat.khandelwal@xxxxxxxxxxxxxxx>
• [PATCH] counter: ti-ecap-capture: fix IS_ERR() vs NULL check
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v4 0/8] iio: stm32-adc: add support of adc for stm32mp13
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v4 6/8] ARM: dts: stm32: add adc pins muxing on stm32mp135f-dk
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v4 7/8] ARM: dts: stm32: add dummy vdd_adc regulator on stm32mp135f-dk
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v4 4/8] iio: adc: stm32: manage min sampling time on all internal channels
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v4 5/8] ARM: dts: stm32: add adc support to stm32mp13
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v4 8/8] ARM: dts: stm32: add adc support on stm32mp135f-dk
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v4 3/8] iio: adc: stm32-adc: add stm32mp13 support
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v4 0/8] iio: stm32-adc: add support of adc for stm32mp13
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v4 1/8] iio: adc: stm32-adc: fix channel sampling time init
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v4 2/8] dt-bindings: iio: adc: stm32-adc: add stm32mp13 compatibles
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH] iio: adc: mcp3911: Fix out of bounds access of array mcp3911_osr_table
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH] iio: adc: mcp3911: Fix out of bounds access of array mcp3911_osr_table
  • From: Colin Ian King <colin.i.king@xxxxxxxxx>
• Re: [RFC PATCH v2 4/5] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• RE: [PATCH v3 4/4] counter: Add RZ/G2L MTU3 counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v3 4/4] counter: Add RZ/G2L MTU3 counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION b9f85101cad3397ef1e509909602a90e257ab9d8
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 4/4] counter: Add RZ/G2L MTU3 counter driver
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: dac: Change the I2C slave address for ds4422/4424 to its correct value
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: dac: Change the I2C slave address for ds4422/4424 to its correct value
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v14 3/3] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v14 3/3] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [RFC PATCH v2 4/5] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• RE: [PATCH] Change the I2C slave address for ds4422/4424 to its correct value
  • From: "Khandelwal, Rajat" <rajat.khandelwal@xxxxxxxxx>
• [PATCH v2] dt-bindings: iio: dac: Change the I2C slave address for ds4422/4424 to its correct value
  • From: Rajat Khandelwal <rajat.khandelwal@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 4/5] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v14 3/3] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v14 2/3] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v14 1/3] iio: adc: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v14 0/3] Add MediaTek MT6370 PMIC support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH] Change the I2C slave address for ds4422/4424 to its correct value
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] iio: adc: mcp3911: mask out device ID in debug prints
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH] iio: adc: mcp3911: use correct id bits
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH] Change the I2C slave address for ds4422/4424 to its correct value
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] Change the I2C slave address for ds4422/4424 to its correct value
  • From: Rajat Khandelwal <rajat.khandelwal@xxxxxxxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION cd9fd78f5c11b5e165d9317ef11e613f4aef4dd1
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v4 3/4] mfd: Add RZ/G2L MTU3 counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 4/5] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 4/5] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 4/5] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: introduce st_lsm6dsx_device_set_enable routine
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: iio: addac: adi,ad74413r: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFT PATCH v3 10/10] iio: Don't silently expect attribute types
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH v2 5/5] MAINTAINERS: Add KX022A maintainer entry
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH v2 3/5] dt-bindings: iio: Add KX022A accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH v2 1/5] regulator: Add devm helpers for get and enable
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH v2 4/5] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 16/16] iio: core: move 'mlock' to 'struct iio_dev_opaque'
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 16/16] iio: core: move 'mlock' to 'struct iio_dev_opaque'
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 15/16] iio: health: max30102: do not use internal iio_dev lock
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 13/16] iio: core: introduce iio_device_{claim|release}_buffer_mode() APIs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [RFC PATCH v2 4/5] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/5] regulator: Add devm helpers for get and enable
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/5] regulator: Add devm helpers for get and enable
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/5] regulator: Add devm helpers for get and enable
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 2/2] iio: addac: add AD74115 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFT PATCH v3 10/10] iio: Don't silently expect attribute types
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v5] iio: pressure: mpl115: Implementing low power mode by shutdown gpio
  • From: Rajat Khandelwal <rajat.khandelwal@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] iio: pressure: mpl115: Implementing low power mode by shutdown gpio
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] drivers: iio: dac: Add AD5754 DAC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 0/3] iio: adc: add max11410 adc driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 1/3] iio: adc: add max11410 adc driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/3] iio: temperature: mlx90632 Add runtime powermanagement modes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH resend] iio: dac: add support for max5522
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: iio: addac: adi,ad74413r: use spi-peripheral-props.yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: add ADC driver for the TI LMP92064 controller
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: dac: change ad5766 maintainer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/8] dt-bindings: iio: adc: stm32-adc: add stm32mp13 compatibles
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/8] iio: adc: stm32-adc: fix channel sampling time init
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH v2 5/5] MAINTAINERS: Add KX022A maintainer entry
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH v2 4/5] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH v2 3/5] dt-bindings: iio: Add KX022A accelerometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH v2 1/5] regulator: Add devm helpers for get and enable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 16/16] iio: core: move 'mlock' to 'struct iio_dev_opaque'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 15/16] iio: health: max30102: do not use internal iio_dev lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 14/16] iio: health: max30100: do not use internal iio_dev lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 12/16] iio: gyro: itg3200_core: do not use internal iio_dev lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 11/16] iio: common: scmi_iio: do not use internal iio_dev lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 08/16] iio: adc: sc27xx_adc: do not use internal iio_dev lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 07/16] iio: adc: rockchip_saradc: do not use internal iio_dev lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 06/16] iio: adc: meson_saradc: do not use internal iio_dev lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 05/16] iio: adc: ltc2947-core: do not use internal iio_dev lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 04/16] iio: adc: lpc32xx_adc: do not use internal iio_dev lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 03/16] iio: adc: imx7d_adc: do not use internal iio_dev lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 02/16] iio: adc: axp288_adc: do not use internal iio_dev lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 01/16] iio: adc: ad799x: do not use internal iio_dev lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 16/16] iio: core: move 'mlock' to 'struct iio_dev_opaque'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 16/16] iio: core: move 'mlock' to 'struct iio_dev_opaque'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 15/16] iio: health: max30102: do not use internal iio_dev lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 13/16] iio: core: introduce iio_device_{claim|release}_buffer_mode() APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• RE: [PATCH v2 10/16] iio: adc: vf610_adc: vf610_adc: do not use internal iio_dev lock
  • From: Bough Chen <haibo.chen@xxxxxxx>
• RE: [PATCH v2 09/16] iio: adc: vf610_adc: add helper function to read samples
  • From: Bough Chen <haibo.chen@xxxxxxx>
• RE: [PATCH v2 03/16] iio: adc: imx7d_adc: do not use internal iio_dev lock
  • From: Bough Chen <haibo.chen@xxxxxxx>
• RE: [PATCH v3 4/4] counter: Add RZ/G2L MTU3 counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: ltc2496: Fix possible null-ptr-deref in ltc2496_probe()
  • From: Wei Yongjun <weiyongjun1@xxxxxxxxxx>
• Re: [PATCH v3 4/4] counter: Add RZ/G2L MTU3 counter driver
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 082fce125e57cff60687181c97f3a8ee620c38f5
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [RFC PATCH v2 4/5] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 4/5] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v13 5/5] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 4/5] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v9 2/2] iio: adc: ad4130: add AD4130 driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v13 5/5] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [RFC PATCH v2 4/5] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/5] regulator: Add devm helpers for get and enable
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 3/5] dt-bindings: iio: Add KX022A accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH v2 3/5] dt-bindings: iio: Add KX022A accelerometer
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [RFC PATCH v2 5/5] MAINTAINERS: Add KX022A maintainer entry
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RFC PATCH v2 4/5] iio: accel: Support Kionix/ROHM KX022A accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RFC PATCH v2 3/5] dt-bindings: iio: Add KX022A accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RFC PATCH v2 2/5] regulator: Add devm helpers for get and enable
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RFC PATCH v2 1/5] regulator: Add devm helpers for get and enable
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RFC PATCH v2 0/5] iio: Support ROHM/Kionix kx022a
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v9 0/2] AD4130
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v9 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v9 1/2] dt-bindings: iio: adc: add AD4130
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v3 4/4] counter: Add RZ/G2L MTU3 counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [RFT PATCH v3 10/10] iio: Don't silently expect attribute types
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFT PATCH v3 10/10] iio: Don't silently expect attribute types
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH v3 09/10] iio: at91-sama5d2_adc: Use IIO_STATIC_CONST_DEVICE_ATTR()
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH v3 04/10] iio: at91-sama5d2_adc: Fix unsafe buffer attributes
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [RFT] potential bug with IIO_CONST_ATTR usage with triggered buffers
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• [PATCH v3 7/8] ARM: dts: stm32: add dummy vdd_adc regulator on stm32mp135f-dk
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v3 8/8] ARM: dts: stm32: add adc support on stm32mp135f-dk
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v3 5/8] ARM: dts: stm32: add adc support to stm32mp13
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v3 6/8] ARM: dts: stm32: add adc pins muxing on stm32mp135f-dk
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v3 3/8] iio: adc: stm32-adc: add stm32mp13 support
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v3 4/8] iio: adc: stm32: manage min sampling time on all internal channels
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v3 2/8] dt-bindings: iio: adc: stm32-adc: add stm32mp13 compatibles
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v3 0/8] iio: stm32-adc: add support of adc for stm32mp13
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v3 1/8] iio: adc: stm32-adc: fix channel sampling time init
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH v2 3/8] iio: adc: stm32-adc: add stm32mp13 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/8] iio: adc: stm32-adc: fix channel sampling time init
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 8/8] ARM: dts: stm32: add adc support on stm32mp135f-dk
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v2 5/8] ARM: dts: stm32: add adc support to stm32mp13
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v2 7/8] ARM: dts: stm32: add dummy vdd_adc regulator on stm32mp135f-dk
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v2 6/8] ARM: dts: stm32: add adc pins muxing on stm32mp135f-dk
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v2 3/8] iio: adc: stm32-adc: add stm32mp13 support
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v2 4/8] iio: adc: stm32: manage min sampling time on all internal channels
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v2 2/8] dt-bindings: iio: adc: stm32-adc: add stm32mp13 compatibles
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v2 1/8] iio: adc: stm32-adc: fix channel sampling time init
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH v2 0/8] iio: stm32-adc: add support of adc for stm32mp13
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: frequency: change admv4420 maintainer
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: dac: change ad5766 maintainer
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 6/8] dt-bindings: iio: pressure: use spi-peripheral-props.yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 5/8] dt-bindings: iio: imu: adi,adis16475: use spi-peripheral-props.yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 8/8] dt-bindings: iio: resolver: adi,ad2s90: use spi-peripheral-props.yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 7/8] dt-bindings: iio: proximity: ams,as3935: use spi-peripheral-props.yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 4/8] dt-bindings: iio: gyroscope: use spi-peripheral-props.yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/8] dt-bindings: iio: frequency: use spi-peripheral-props.yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/8] dt-bindings: iio: addac: adi,ad74413r: improve example
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: iio: addac: adi,ad74413r: use spi-peripheral-props.yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v13 1/5] dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v13 5/5] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v13 2/5] dt-bindings: leds: Add MediaTek MT6370 flashlight
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v13 3/5] iio: adc: mt6370: Add MediaTek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v13 1/5] dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v13 4/5] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v13 5/5] leds: flash: mt6370: Add MediaTek MT6370 flashlight support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v13 0/5] Add MediaTek MT6370 PMIC support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• RE: [PATCH RFC 5/8] counter: Add RZ/G2L MTU3 counter driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: frequency: change admv4420 maintainer
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: dac: change ad5766 maintainer
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• Re: [PATCH v2 16/16] iio: core: move 'mlock' to 'struct iio_dev_opaque'
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 13/16] iio: core: introduce iio_device_{claim|release}_buffer_mode() APIs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 15/16] iio: health: max30102: do not use internal iio_dev lock
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 14/16] iio: health: max30100: do not use internal iio_dev lock
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: add ADC driver for the TI LMP92064 controller
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings:iio:adc: add documentation for TI LMP92064 controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 16/16] iio: core: move 'mlock' to 'struct iio_dev_opaque'
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 15/16] iio: health: max30102: do not use internal iio_dev lock
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 14/16] iio: health: max30100: do not use internal iio_dev lock
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 13/16] iio: core: introduce iio_device_{claim|release}_buffer_mode() APIs
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• RE: [PATCH 5/8] dt-bindings: iio: imu: adi,adis16475: use spi-peripheral-props.yaml
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• [PATCH v2 16/16] iio: core: move 'mlock' to 'struct iio_dev_opaque'
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 13/16] iio: core: introduce iio_device_{claim|release}_buffer_mode() APIs
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 14/16] iio: health: max30100: do not use internal iio_dev lock
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 15/16] iio: health: max30102: do not use internal iio_dev lock
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 12/16] iio: gyro: itg3200_core: do not use internal iio_dev lock
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 11/16] iio: common: scmi_iio: do not use internal iio_dev lock
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 10/16] iio: adc: vf610_adc: vf610_adc: do not use internal iio_dev lock
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 08/16] iio: adc: sc27xx_adc: do not use internal iio_dev lock
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 09/16] iio: adc: vf610_adc: add helper function to read samples
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 07/16] iio: adc: rockchip_saradc: do not use internal iio_dev lock
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 06/16] iio: adc: meson_saradc: do not use internal iio_dev lock
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 03/16] iio: adc: imx7d_adc: do not use internal iio_dev lock
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 02/16] iio: adc: axp288_adc: do not use internal iio_dev lock
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 04/16] iio: adc: lpc32xx_adc: do not use internal iio_dev lock
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 01/16] iio: adc: ad799x: do not use internal iio_dev lock
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 00/16] Make 'mlock' really private
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v2 05/16] iio: adc: ltc2947-core: do not use internal iio_dev lock
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH v1 1/2] dt-bindings:iio:adc: add documentation for TI LMP92064 controller
  • From: Leonard Göhrs <l.goehrs@xxxxxxxxxxxxxx>
• [PATCH v1 2/2] iio: adc: add ADC driver for the TI LMP92064 controller
  • From: Leonard Göhrs <l.goehrs@xxxxxxxxxxxxxx>
• [PATCH 8/8] dt-bindings: iio: resolver: adi,ad2s90: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 7/8] dt-bindings: iio: proximity: ams,as3935: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 6/8] dt-bindings: iio: pressure: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 5/8] dt-bindings: iio: imu: adi,adis16475: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 4/8] dt-bindings: iio: gyroscope: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 3/8] dt-bindings: iio: frequency: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/8] dt-bindings: iio: addac: adi,ad74413r: improve example
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/8] dt-bindings: iio: addac: adi,ad74413r: use spi-peripheral-props.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: dac: add adi,ad5754.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] drivers: iio: dac: Add AD5754 DAC driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] drivers: iio: dac: Add AD5754 DAC driver
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH 13/15] iio: health: max30100: do not use internal iio_dev lock
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 14/15] iio: health: max30102: do not use internal iio_dev lock
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH 2/2] drivers: iio: dac: Add AD5754 DAC driver
  • From: Ciprian Regus <ciprian.regus@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: dac: add adi,ad5754.yaml
  • From: Ciprian Regus <ciprian.regus@xxxxxxxxxx>
• [PATCH 0/2] Add support for the AD5754 DAC
  • From: Ciprian Regus <ciprian.regus@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: addac: add AD74115
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v12 2/5] dt-bindings: leds: Add MediaTek MT6370 flashlight
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 2/3] dt-bindings: iio: adc: add adi,max11410.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v8 3/3] Documentation: ABI: testing: add max11410 doc
  • From: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>
• [PATCH v8 2/3] dt-bindings: iio: adc: add adi,max11410.yaml
  • From: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>
• [PATCH v8 1/3] iio: adc: add max11410 adc driver
  • From: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>
• [PATCH v8 0/3] iio: adc: add max11410 adc driver
  • From: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: addac: add AD74115
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v7 2/3] dt-bindings: iio: adc: add adi,max11410.yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/2] iio: addac: add AD74115 driver
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: addac: add AD74115
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• Re: [PATCH v2 2/5] iio: accel: fxls8962af: Use new EXPORT_NS_GPL_DEV_PM_OPS()
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [RFT PATCH v3 10/10] iio: Don't silently expect attribute types
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFT PATCH v3 10/10] iio: Don't silently expect attribute types
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v7 3/3] Documentation: ABI: testing: add max11410 doc
  • From: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>
• [PATCH v7 1/3] iio: adc: add max11410 adc driver
  • From: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>
• [PATCH v7 2/3] dt-bindings: iio: adc: add adi,max11410.yaml
  • From: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>
• [PATCH v7 0/3] iio: adc: add max11410 adc driver
  • From: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>
• Re: [RFT PATCH v3 10/10] iio: Don't silently expect attribute types
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFT PATCH v3 10/10] iio: Don't silently expect attribute types
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 4/5] iio: imu: inv_icm42600: Move exports to IIO_ICM42600 namespace
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [RFT PATCH v3 10/10] iio: Don't silently expect attribute types
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] iio: imu: inv_mpu: Move exports to IIO_MPU6050 namespace
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH v6 1/3] iio: temperature: mlx90632 Add runtime powermanagement modes
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• [RFT PATCH v3 10/10] iio: Don't silently expect attribute types
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 09/10] iio: at91-sama5d2_adc: Use IIO_STATIC_CONST_DEVICE_ATTR()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 08/10] iio: bmc150-accel-core: Use IIO_STATIC_CONST_DEVICE_ATTR()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 07/10] iio: adxl372: Use IIO_STATIC_CONST_DEVICE_ATTR()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 06/10] iio: adxl367: Use IIO_STATIC_CONST_DEVICE_ATTR()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 05/10] iio: Add IIO_STATIC_CONST_DEVICE_ATTR
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 04/10] iio: at91-sama5d2_adc: Fix unsafe buffer attributes
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 03/10] iio: bmc150-accel-core: Fix unsafe buffer attributes
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>