Re: [PATCH 109/606] iio: imu: inv_mpu6050: Convert to i2c's .probe_new()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

looks good, thanks for the patch.

Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@xxxxxxx>

Best regards,
JB


From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
Sent: Friday, November 18, 2022 23:37
To: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>; Lee Jones <lee.jones@xxxxxxxxxx>; Grant Likely <grant.likely@xxxxxxxxxx>; Wolfram Sang <wsa@xxxxxxxxxx>; Jonathan Cameron <jic23@xxxxxxxxxx>; Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>; Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>; Hans Verkuil <hverkuil-cisco@xxxxxxxxx>; Michael Srba <Michael.Srba@xxxxxxxxx>
Cc: linux-i2c@xxxxxxxxxxxxxxx <linux-i2c@xxxxxxxxxxxxxxx>; kernel@xxxxxxxxxxxxxx <kernel@xxxxxxxxxxxxxx>; Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>; Lars-Peter Clausen <lars@xxxxxxxxxx>; linux-iio@xxxxxxxxxxxxxxx <linux-iio@xxxxxxxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx <linux-kernel@xxxxxxxxxxxxxxx>
Subject: [PATCH 109/606] iio: imu: inv_mpu6050: Convert to i2c's .probe_new() 
 
[CAUTION] This is an EXTERNAL email. Do not click links or open attachments unless you recognize the sender and know the content is safe.

======================================================================
From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
 drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
index 7a8d60a5afa9..70eaa408e388 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
@@ -95,9 +95,9 @@ static int inv_mpu_i2c_aux_setup(struct iio_dev *indio_dev)
  *
  *  Returns 0 on success, a negative error code otherwise.
  */
-static int inv_mpu_probe(struct i2c_client *client,
-                        const struct i2c_device_id *id)
+static int inv_mpu_probe(struct i2c_client *client)
 {
+       const struct i2c_device_id *id = i2c_client_get_device_id(client);
         const void *match;
         struct inv_mpu6050_state *st;
         int result;
@@ -260,7 +260,7 @@ static const struct acpi_device_id inv_acpi_match[] = {
 MODULE_DEVICE_TABLE(acpi, inv_acpi_match);
 
 static struct i2c_driver inv_mpu_driver = {
-       .probe          =       inv_mpu_probe,
+       .probe_new      =       inv_mpu_probe,
         .remove         =       inv_mpu_remove,
         .id_table       =       inv_mpu_id,
         .driver = {
-- 
2.38.1




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux