Linux IIO Development

• Thread Index

• [PATCH v5 05/13] mfd: axp20x: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v5 12/13] power: axp20x_battery: Support battery status without fuel gauge
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v5 04/13] dt-bindings: power: axp20x-battery: Add AXP192 compatible
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v5 07/13] iio: adc: axp20x_adc: Minor code cleanups
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v5 08/13] iio: adc: axp20x_adc: Replace adc_en2 flag with adc_en2_mask field
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v5 06/13] regulator: axp20x: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v5 10/13] power: supply: axp20x_usb_power: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v5 09/13] iio: adc: axp20x_adc: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v5 03/13] dt-bindings: power: supply: axp20x: Add AXP192 compatible
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v5 02/13] dt-bindings: iio: adc: axp209: Add AXP192 compatible
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v5 00/13] Add support for AXP192 PMIC
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v5 01/13] dt-bindings: mfd: add bindings for AXP192 MFD device
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v6 11/12] arm64: dts: qcom: add PMP8074 DTSI
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 08/12] dt-bindings: pinctrl: qcom,pmic-gpio: add PMP8074
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 01/12] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: Intel Timed-IO driver in IIO/Counter subsystem
  • From: "Hall, Christopher S" <christopher.s.hall@xxxxxxxxx>
• Re: [PATCH] iio: light: cm32181: Add PM support
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: Add rtq6056 support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: Add rtq6056 support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [PATCH v2 3/5] iio: pressure: bmp280: simplify driver initialization logic
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH v2 2/5] iio: pressure: Kconfig: Add references to BMP380
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH v2 5/5] iio: pressure: bmp280: Adds more tunable config parameters for BMP380
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH] iio: light: cm32181: Add PM support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: Add rtq6056 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v7 0/3] adc-joystick: Add polled support
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v7 2/3] Input: adc-joystick - Add polled input device support
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v7 1/3] dt-bindings: adc-joystick: add poll-interval
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v7 3/3] arm64: dts: rockchip: Update joystick to polled for OG2
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• Re: [PATCH] iio: adc: ti-adc128s052: Fix number of channels when device tree is used
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v4 2/2] iio: adc: Add rtq6056 support
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: iio: adc: Add rtq6056 adc support
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH v4 0/2] Add Richtek RTQ6056 support
  • From: cy_huang <u0084500@xxxxxxxxx>
• Re: [PATCH v4 06/15] mfd: axp20x: Add support for AXP192
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 06/15] mfd: axp20x: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH v6 02/12] mfd: qcom-spmi-pmic: add support for PMP8074
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 06/15] mfd: axp20x: Add support for AXP192
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] iio: light: cm32181: Add PM support
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add rtq6056 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add rtq6056 support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add rtq6056 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add rtq6056 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add rtq6056 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] Documentation: bno055: separate SPDX identifier and page title
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: Intel Timed-IO driver in IIO/Counter subsystem
  • From: Kent Gibson <kent.gibson@xxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add rtq6056 support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add rtq6056 support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [PATCH v2] Documentation: bno055: separate SPDX identifier and page title
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• Re: [PATCH v4 00/10] Add support for magnetometer Yamaha YAS537
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 08/10] iio: magnetometer: yas530: Apply documentation and style fixes
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 0/9] Improve MCP3911 driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 9/9] iio: adc: mcp3911: add support to set PGA
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 8/9] iio: adc: mcp3911: add support for oversampling ratio
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 6/9] iio: adc: mcp3911: add support for interrupts
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 5/9] iio: adc: mcp3911: add support for buffers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add rtq6056 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: add max11410 adc driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v6 08/12] dt-bindings: pinctrl: qcom,pmic-gpio: add PMP8074
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v6 07/12] regulator: qcom_spmi: add support for PMP8074 regulators
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v6 06/12] dt-bindings: regulator: qcom,spmi-regulator: add PMP8074 PMIC
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v6 09/12] pinctrl: qcom-pmic-gpio: add support for PMP8074
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v6 10/12] iio: adc: qcom-spmi-adc5: add ADC5_VREF_VADC to rev2 ADC5
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v6 12/12] arm64: dts: qcom: ipq8074-hk01: add VQMMC supply
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v6 11/12] arm64: dts: qcom: add PMP8074 DTSI
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v6 05/12] regulator: qcom_spmi: add support for HT_P600
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v6 04/12] regulator: qcom_spmi: add support for HT_P150
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v6 03/12] dt-bindings: regulator: qcom,spmi-regulator: Convert to dtschema
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v6 01/12] dt-bindings: mfd: qcom-spmi-pmic: add support for PMP8074
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH v6 02/12] mfd: qcom-spmi-pmic: add support for PMP8074
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add rtq6056 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 13/13] video: backlight: mt6370: Add Mediatek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 12/13] leds: flashlight: mt6370: Add Mediatek MT6370 flashlight support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 10/13] power: supply: mt6370: Add Mediatek MT6370 charger driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 09/13] iio: adc: mt6370: Add Mediatek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 07/13] mfd: mt6370: Add Mediatek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 08/13] usb: typec: tcpci_mt6370: Add Mediatek MT6370 tcpci driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 3/5] iio: pressure: bmp280: simplify driver initialization logic
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 5/5] iio: pressure: bmp280: Adds more tunable config parameters for BMP380
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] Documentation: bno055: separate SPDX identifier and page title
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 10/10] iio: magnetometer: yas530: Add YAS537 variant
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 09/10] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: fast spi driver development
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v4 08/10] iio: magnetometer: yas530: Apply documentation and style fixes
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 07/10] iio: magnetometer: yas530: Move printk %*ph parameters out from stack
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 06/10] iio: magnetometer: yas530: Rename functions and registers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: fast spi driver development
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v3 9/9] iio: adc: mcp3911: add support to set PGA
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v3 8/9] iio: adc: mcp3911: add support for oversampling ratio
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v3 4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v3 5/9] iio: adc: mcp3911: add support for buffers
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v3 6/9] iio: adc: mcp3911: add support for interrupts
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v3 7/9] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v3 3/9] iio: adc: mcp3911: use correct formula for AD conversion
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v3 2/9] iio: adc: mcp3911: correct "microchip,device-addr" property
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v3 1/9] iio: adc: mcp3911: make use of the sign bit
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v3 0/9] Improve MCP3911 driver
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH] iio: accel: mxc4005: report orientation of accelerometer
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/5] iio: pressure: Kconfig: Add references to BMP380
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: adc: xilinx-xadc: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: adc: Add rtq6056 adc support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 08/13] usb: typec: tcpci_mt6370: Add Mediatek MT6370 tcpci driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] iio: adc: add max11410 adc driver
  • From: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>
• [PATCH 3/3] dt-bindings: iio: adc: add adi,max11410.yaml
  • From: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>
• [PATCH 2/3] Documentation: ABI: testing: add max11410 doc
  • From: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: adc: xilinx-xadc: Make use of device properties
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH v4 08/13] usb: typec: tcpci_mt6370: Add Mediatek MT6370 tcpci driver
  • From: szuni chen <szunichen@xxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: iio: pressure: bmp085: Add BMP380 compatible string
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH v4 06/13] dt-bindings: mfd: Add Mediatek MT6370
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 02/13] dt-bindings: power: supply: Add Mediatek MT6370 Charger
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: iio: pressure: bmp085: Add BMP380 compatible string
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 2/6] dt-bindings: mfd: Add mp2733 compatible
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v3 2/2] iio: adc: Add rtq6056 support
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH v3 0/2] Add Richtek RTQ6056 support
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: adc: Add rtq6056 adc support
  • From: cy_huang <u0084500@xxxxxxxxx>
• Re: [PATCH v4 08/13] usb: typec: tcpci_mt6370: Add Mediatek MT6370 tcpci driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add rtq6056 support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [PATCH v2 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v4 13/13] video: backlight: mt6370: Add Mediatek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v4 12/13] leds: flashlight: mt6370: Add Mediatek MT6370 flashlight support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v4 11/13] leds: mt6370: Add Mediatek MT6370 current sink type LED Indicator support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v4 10/13] power: supply: mt6370: Add Mediatek MT6370 charger driver
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v4 09/13] iio: adc: mt6370: Add Mediatek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v4 08/13] usb: typec: tcpci_mt6370: Add Mediatek MT6370 tcpci driver
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v4 07/13] mfd: mt6370: Add Mediatek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v4 06/13] dt-bindings: mfd: Add Mediatek MT6370
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v4 05/13] dt-bindings: backlight: Add Mediatek MT6370 backlight
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v4 04/13] dt-bindings: leds: Add Mediatek MT6370 flashlight
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v4 01/13] dt-bindings: usb: Add Mediatek MT6370 TCPC
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v4 03/13] dt-bindings: leds: mt6370: Add Mediatek mt6370 current sink type LED indicator
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v4 02/13] dt-bindings: power: supply: Add Mediatek MT6370 Charger
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v4 00/13] Add Mediatek MT6370 PMIC support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v2 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v2] Documentation: bno055: separate SPDX identifier and page title
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add rtq6056 support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [PATCH v2 5/5] iio: pressure: bmp280: Adds more tunable config parameters for BMP380
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [v6 14/14] docs: iio: add documentation for BNO055 driver
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• RE: [PATCH V1 1/1] iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
  • From: LI Qingwu <qing-wu.li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 5/5] iio: pressure: bmp280: Adds more tunable config parameters for BMP380
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v2 4/5] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v2 1/5] dt-bindings: iio: pressure: bmp085: Add BMP380 compatible string
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v2 3/5] iio: pressure: bmp280: simplify driver initialization logic
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v2 2/5] iio: pressure: Kconfig: Add references to BMP380
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v2 0/5] Add support for pressure sensor Bosch BMP380
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH v4 08/10] iio: magnetometer: yas530: Apply documentation and style fixes
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v4 06/10] iio: magnetometer: yas530: Rename functions and registers
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v4 04/10] iio: magnetometer: yas530: Correct temperature handling
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v4 05/10] iio: magnetometer: yas530: Change data type of calibration coefficients
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v4 07/10] iio: magnetometer: yas530: Move printk %*ph parameters out from stack
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v4 09/10] iio: magnetometer: yas530: Introduce "chip_info" structure
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v4 10/10] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v4 03/10] iio: magnetometer: yas530: Correct scaling of magnetic axes
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v4 01/10] iio: magnetometer: yas530: Change data type of hard_offsets to signed
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v4 02/10] iio: magnetometer: yas530: Change range of data in volatile register
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v4 00/10] Add support for magnetometer Yamaha YAS537
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v2 04/10] iio: adc: mcp3911: add support for interrupts
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: proximity: sx_common: Allow IIO core to take care of firmware node
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [v6 14/14] docs: iio: add documentation for BNO055 driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [v6 14/14] docs: iio: add documentation for BNO055 driver
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• fast spi driver development
  • From: Patricio Moreno <pm.pato@xxxxxxxxx>
• Re: [PATCH v4 04/15] dt-bindings: gpio: Add AXP192 GPIO bindings
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH v4 12/15] pinctrl: Add AXP192 pin control driver
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH] iio: proximity: sx9324: add empty line in front of bullet list
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• Re: [v6 14/14] docs: iio: add documentation for BNO055 driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] iio: proximity: sx9324: add empty line in front of bullet list
  • From: Akira Yokosawa <akiyks@xxxxxxxxx>
• Re: (subset) [PATCH 5/5] arm64: dts: qcom: msm8998-xperia: Introduce ToF sensor support
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [v6 12/14] iio: imu: add BNO055 serdev driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 12/15] pinctrl: Add AXP192 pin control driver
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH v4 12/15] pinctrl: Add AXP192 pin control driver
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• Re: [PATCH v4 04/15] dt-bindings: gpio: Add AXP192 GPIO bindings
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: adc: xilinx-xadc: Make use of device properties
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: adc: xilinx-xadc: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio: magnetometer: rm3100: do not explicity set INDIO_BUFFER_TRIGGERED mode
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [linux-next:master] BUILD REGRESSION 6cc11d2a1759275b856e464265823d94aabd5eaf
  • From: Roman Gushchin <roman.gushchin@xxxxxxxxx>
• Re: [PATCH v3 2/6] dt-bindings: mfd: Add mp2733 compatible
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH net-next v1 1/1] iio: adc: tsc2046: silent spi_device_id warning
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 12/15] pinctrl: Add AXP192 pin control driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 09/15] iio: adc: axp20x_adc: Replace adc_en2 flag with adc_en2_mask field
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-tsc2046: do not explicity set INDIO_BUFFER_TRIGGERED mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V1 1/1] iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH net-next v1 1/1] iio: adc: tsc2046: silent spi_device_id warning
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ti-adc128s052: Add lower resolution devices support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-adc128s052: Fix number of channels when device tree is used
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 13/16] pinctrl: Add AXP192 pin control driver
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH v4 12/15] pinctrl: Add AXP192 pin control driver
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v1] iio: trigger: move trig->owner init to trigger allocate() stage
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: adc: qcom-vadc: Move symbol exports to IIO_QCOM_VADC namespace
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-adc128s052: Fix number of channels when device tree is used
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: adc: ti-adc128s052: Fix number of channels when device tree is used
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add rtq6056 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 1/3] dt-bindings: adc-joystick: add poll-interval-ms
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 2/3] Input: adc-joystick - Add polled input device support
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: ti,adc128s052: Add adc08c and adc10c family
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: ti,adc128s052: Add adc08c and adc10c family
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 0/2] iio: adc: ti-adc128s052: Add support for adc102s021 and family
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/2] iio: adc: ti-adc128s052: Add lower resolution devices support
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/2] dt-bindings: iio: adc: ti,adc128s052: Add adc08c and adc10c family
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] iio: adc: ti-adc128s052: Fix number of channels when device tree is used
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH V1 1/1] iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V1 0/1] iio: accel: sca3300: Extend the trigger buffer
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH V9 5/5] iio: accel: sca3300: Add inclination channels
  • From: LI Qingwu <qing-wu.li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] iio: adc: ti-adc128s052: Fix number of channels when device tree is used
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v3 05/14] dt-bindings: backlight: Add Mediatek MT6370 backlight
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 1/2] dt-bindings: iio: adc: add AD4130
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: adc-joystick: add poll-interval
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: adc-joystick: add poll-interval
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH] iio: humidity: dht11: Improve error reporting in .probe()
  • From: Uwe Kleine-König <ukleinek@xxxxxxxxxx>
• Re: [PATCH] iio: humidity: dht11: Improve error reporting in .probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: humidity: dht11: Improve error reporting in .probe()
  • From: Uwe Kleine-König <ukleinek@xxxxxxxxxx>
• Re: [PATCH v4 00/15] Add support for AXP192 PMIC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 03/10] iio: adc: mcp3911: add support for buffers
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v4 00/15] Add support for AXP192 PMIC
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 15/15] power: axp20x_battery: Add support for AXP192
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 14/15] power: axp20x_battery: Support battery status without fuel gauge
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 13/15] power: axp20x_battery: Add constant charge current table
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 11/15] power: supply: axp20x_usb_power: Add support for AXP192
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 08/15] iio: adc: axp20x_adc: Minor code cleanups
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 10/15] iio: adc: axp20x_adc: Add support for AXP192
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 09/15] iio: adc: axp20x_adc: Replace adc_en2 flag with adc_en2_mask field
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 06/15] mfd: axp20x: Add support for AXP192
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 07/15] regulator: axp20x: Add support for AXP192
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 00/15] Add support for AXP192 PMIC
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH net-next v1 1/1] iio: adc: tsc2046: silent spi_device_id warning
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v3 13/16] pinctrl: Add AXP192 pin control driver
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH] iio: humidity: dht11: Improve error reporting in .probe()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] iio: humidity: dht11: Improve error reporting in .probe()
  • From: Uwe Kleine-König <ukleinek@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-tsc2046: do not explicity set INDIO_BUFFER_TRIGGERED mode
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v6 3/3] arm64: dts: rockchip: Update joystick to polled for OG2
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v6 2/3] Input: adc-joystick - Add polled input device support
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v6 1/3] dt-bindings: adc-joystick: add poll-interval-ms
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v6 0/3] adc-joystick: Add polled support
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 00/15] Add support for AXP192 PMIC
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 00/15] Add support for AXP192 PMIC
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 12/15] pinctrl: Add AXP192 pin control driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] iio: adc: ti-tsc2046: do not explicity set INDIO_BUFFER_TRIGGERED mode
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH] iio: adc: ad778-1: do not explicity set INDIO_BUFFER_TRIGGERED mode
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v4 04/15] dt-bindings: gpio: Add AXP192 GPIO bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: proximity: sx_common: Allow IIO core to take care of firmware node
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v3 11/14] power: supply: mt6370: Add Mediatek MT6370 charger driver
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v4 08/15] iio: adc: axp20x_adc: Minor code cleanups
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v4 09/15] iio: adc: axp20x_adc: Replace adc_en2 flag with adc_en2_mask field
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v4 13/15] power: axp20x_battery: Add constant charge current table
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v4 10/15] iio: adc: axp20x_adc: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v4 15/15] power: axp20x_battery: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v4 12/15] pinctrl: Add AXP192 pin control driver
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v4 11/15] power: supply: axp20x_usb_power: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v4 14/15] power: axp20x_battery: Support battery status without fuel gauge
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v4 07/15] regulator: axp20x: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v4 06/15] mfd: axp20x: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v4 05/15] dt-bindings: power: axp20x-battery: Add AXP192 compatible
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v4 03/15] dt-bindings: power: supply: axp20x: Add AXP192 compatible
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v4 00/15] Add support for AXP192 PMIC
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v4 01/15] dt-bindings: mfd: add bindings for AXP192 MFD device
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v4 04/15] dt-bindings: gpio: Add AXP192 GPIO bindings
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v4 02/15] dt-bindings: iio: adc: axp209: Add AXP192 compatible
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• Re: [PATCH v2 1/2] iio: proximity: sx_common: Don't use IIO device for properties
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: Add rtq6056 adc support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: Add rtq6056 adc support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
• Re: [PATCH v2 04/10] iio: adc: mcp3911: add support for interrupts
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] iio: adc: Add rtq6056 support
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: adc: Add rtq6056 adc support
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH v2 0/2] Add Richtek RTQ6056 support
  • From: cy_huang <u0084500@xxxxxxxxx>
• Re: [PATCH v5 1/3] dt-bindings: adc-joystick: add poll-interval-ms
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 1/2] dt-bindings: iio: adc: add AD4130
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: proximity: sx_common: Don't use IIO device for properties
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: proximity: sx_common: Don't use IIO device for properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: (EXT) Re: [PATCH] dt-bindings: iio: adc: Add imx6ul & imx6sx compatibles
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v5 3/3] arm64: dts: rockchip: Update joystick to polled for OG2
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v5 1/3] dt-bindings: adc-joystick: add poll-interval-ms
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v5 2/3] Input: adc-joystick - Add polled input device support
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v5 0/3] adc-joystick: Add polled support
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• Re: [PATCH v15 06/10] iio: test: add basic tests for the iio-rescale driver
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v2 01/19] iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 14/19] iio: adc: at91-sama5d2_adc: add startup and tracktim as parameter for at91_adc_setup_samp_freq()
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 11/19] iio: adc: at91-sama5d2_adc: add 64 and 256 oversampling ratio
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 06/19] iio: adc: at91-sama5d2_adc: handle different EMR.OSR for different hw versions
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 05/19] iio: adc: at91-sama5d2_adc: exit from write_raw() when buffers are enabled
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 02/19] iio: adc: at91-sama5d2_adc: check return status for pressure and touch
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 17/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 03/19] iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 09/19] iio: adc: at91-sama5d2_adc: add .read_avail() chan_info ops
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 00/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 19/19] iio: adc: at91-sama5d2_adc: add runtime pm support
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 07/19] iio: adc: at91-sama5d2_adc: move the check of oversampling in its function
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 13/19] iio: adc: at91-sama5d2_adc: update trackx on emr
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 15/19] iio: adc: at91-sama5d2_adc: lock around at91_adc_read_info_raw()
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 18/19] iio: adc: at91-sama5d2_adc: add empty line after functions
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 12/19] iio: adc: at91-sama5d2_adc: move oversampling storage in its function
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 04/19] iio: adc: at91-sama5d2_adc: disable/prepare buffer on suspend/resume
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 10/19] iio: adc: at91-sama5d2_adc: adjust osr based on specific platform data
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 08/19] iio: adc: at91-sama5d2_adc: drop AT91_OSR_XSAMPLES defines
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v2 16/19] dt-bindings: iio: adc: at91-sama5d2_adc: add id for temperature channel
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH v7 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v7 1/2] dt-bindings: iio: adc: add AD4130
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v7 0/2] AD4130
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: iio: adc: add AD4130
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: iio: adc: add AD4130
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio/hid: Add mount_matrix
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Dynamically configured channels, overlap with GPIO, encoder support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio/hid: Add mount_matrix
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 00/17] staging/iio: Clean up AD7746 CDC driver and move from staging.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 15/17] iio: cdc: ad7746: Add device specific ABI documentation.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 11/17] iio: core: Introduce _zeropoint for differential channels
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 08/17] staging: iio: cdc: ad7746: Break up use of chan->address and use FIELD_PREP etc
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 02/10] iio: adc: mcp3911: use resource-managed version of iio_device_register
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 06/10] iio: adc: mcp3911: add support for oversampling ratio
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 09/14] regulator: mt6370: Add mt6370 DisplayBias and VibLDO support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 07/14] mfd: mt6370: Add Mediatek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add rtq6056 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Dynamically configured channels, overlap with GPIO, encoder support
  • From: Giedrius Trainavičius <giedrius@xxxxxxxxx>
• Re: [PATCH] iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• [PATCH v6 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v6 1/2] dt-bindings: iio: adc: add AD4130
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v6 0/2] AD4130
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• Re: [PATCH 1/4] iio: ABI: temperature: Unify documentation for thermocouple fault detection.
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: ABI: stm32-timer-trigger: Fuse unusual ABI into main doc.
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• [PATCH AUTOSEL 5.18 28/53] iio: freq: admv1014: Fix warning about dubious x & !y and improve readability
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 00/36] IIO: switch easy cases to new simpler PM related macros.
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: adc-joystick: add poll-interval
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] Input: adc-joystick - Add polled input device support
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: adc-joystick: add poll-interval
  • From: Chris Morgan <macromorgan@xxxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: adc-joystick: add poll-interval
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: staging: iio: imu: Document CEVA BNO08x
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: adc-joystick: add poll-interval
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v4 0/3] adc-joystick: Add polled support
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v4 3/3] arm64: dts: rockchip: Update joystick to polled for Odroid-Go2
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH v4 2/3] Input: adc-joystick - Add polled input device support
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• Re: [PATCH] iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio/hid: Add mount_matrix
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio/hid: Add mount_matrix
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH] iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• Re: [PATCH v2 08/15] mfd: mt6370: Add Mediatek MT6370 support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: pressure: bmp280: Adds more tunable config parameters for BMP380
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH v2] iio: cros: Register FIFO callback after sensor is registered
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 08/15] mfd: mt6370: Add Mediatek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: mfd: Add mp2733 compatible
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 2/6] dt-bindings: mfd: Add mp2733 compatible
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: ABI: temperature: Unify documentation for thermocouple fault detection.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 08/15] mfd: mt6370: Add Mediatek MT6370 support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: ABI: stm32-timer-trigger: Fuse unusual ABI into main doc.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: mfd: Add mp2733 compatible
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v3 13/16] pinctrl: Add AXP192 pin control driver
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH 06/10] mfd: axp20x: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH v3 3/6] mfd: mp2629: Add support for mps mp2733 battery charger
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 06/10] mfd: axp20x: Add support for AXP192
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 02/10] dt-bindings: mfd: add bindings for AXP192 MFD device
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] iio/hid: Add mount_matrix
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• Re: [PATCH] iio/hid: Add mount_matrix
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v3 13/16] pinctrl: Add AXP192 pin control driver
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v15 06/10] iio: test: add basic tests for the iio-rescale driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] iio: ABI: sx9324: Squash some formatting to keep scripting happy.
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: ABI: stm32-timer-trigger: Fuse unusual ABI into main doc.
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: ABI: max31865: Drop in_filter_notch_centre_frequency as in main docs.
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: ABI: temperature: Unify documentation for thermocouple fault detection.
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [PATCH 05/36] iio: adc: meson_saradc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH 34/36] iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  • From: Rishi Gupta <gupt21@xxxxxxxxx>
• [PATCH 4/4] iio: ABI: sx9324: Squash some formatting to keep scripting happy.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/4] iio: ABI: max31865: Drop in_filter_notch_centre_frequency as in main docs.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/4] iio: ABI: temperature: Unify documentation for thermocouple fault detection.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 3/4] iio: ABI: stm32-timer-trigger: Fuse unusual ABI into main doc.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 0/4] IIO: Some documentation error and warning fixes.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: adc: ti-ads124s08: Drop unused parameter to ads124s_read()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V9 5/5] iio: accel: sca3300: Add inclination channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio/hid: Add mount_matrix
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: pressure: bmp280: Adds more tunable config parameters for BMP380
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: accel: bma400: Add support for single and double tap events
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH v1 1/2] iio: Add new event type gesture and use direction for single and double tap
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v3 17/17] RFC: iio: cdc: ad7746: Add roadtest
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 16/17] iio: cdc: ad7746: Move driver out of staging.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 15/17] iio: cdc: ad7746: Add device specific ABI documentation.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 14/17] staging: iio: ad7746: White space cleanup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 13/17] staging: iio: cdc: ad7746: Use read_avail() rather than opencoding.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 12/17] staging: iio: cdc: ad7746: Switch from _offset to _zeropoint for differential channels.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 11/17] iio: core: Introduce _zeropoint for differential channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 09/17] staging: iio: cdc: ad7746: Drop unused i2c_set_clientdata()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 10/17] staging: iio: cdc: ad7746: Use _raw and _scale for temperature channels.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 08/17] staging: iio: cdc: ad7746: Break up use of chan->address and use FIELD_PREP etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 07/17] staging: iio: cdc: ad7764: Push locking down into case statements in read/write_raw
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 03/17] staging: iio: cdc: ad7746: Use explicit be24 handling.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 01/17] iio: core: Increase precision of IIO_VAL_FRACTIONAL_LOG2 when possible
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 04/17] staging: iio: cdc: ad7746: Push handling of supply voltage scale to userspace.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 02/17] iio: ABI: Fix wrong format of differential capacitance channel ABI.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 06/17] staging: iio: cdc: ad7746: Factor out ad7746_read_channel()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 05/17] staging: iio: cdc: ad7746: Use local buffer for multi byte reads.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 00/17] staging/iio: Clean up AD7746 CDC driver and move from staging.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 00/17] staging/iio: Clean up AD7746 CDC driver and move from staging.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/8] iio: magnetometer: yas530: Rename functions and registers
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH] HID: hid-sensor-hub: Remove unused macros
  • From: Akihiko Odaki <akihiko.odaki@xxxxxxxxx>
• Re: [PATCH v3 5/8] iio: magnetometer: yas530: Change data type of calibration coefficients
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2] iio: cros: Register FIFO callback after sensor is registered
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH] iio: cros: Add cros_ec_sensors_core_register
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH] iio/hid: Add mount_matrix
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 05/10] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: pressure: bmp085: Add BMP380 compatible string
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] iio/hid: Add mount_matrix
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 3/3] iio: pressure: bmp280: Adds more tunable config parameters for BMP380
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH 2/3] iio: pressure: bmp280: Add support for BMP380 sensor family
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH 1/3] dt-bindings: iio: pressure: bmp085: Add BMP380 compatible string
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• Re: [PATCH v3 2/3] Input: adc-joystick - Add polled input device support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 8/8] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/8] iio: magnetometer: yas530: Rename functions and registers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/8] iio: magnetometer: yas530: Correct temperature handling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] iio: adc: stm32-adc: add checks on adc state
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad5380: aligned '*' each line and drop unneeded blank line
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH][next] iio: adc: qcom-spmi-rradc: Fix spelling mistake "coherrency" -> "coherency"
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Questions: IIO type for absorbance and float values in channels?
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 11/36] iio: dac: ds4424: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 14/36] iio: dac: max5821: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 20/36] iio: light: al3320a: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio/hid: Add mount_matrix
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 10/10] iio: adc: mcp3911: add support to set PGA
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio/hid: Add mount_matrix
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 09/10] iio: adc: mcp3911: make use of the sign bit
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 08/10] iio: adc: mcp3911: add support for phase
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio/hid: Add mount_matrix
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 10/10] iio: adc: mcp3911: add support to set PGA
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 07/10] iio: adc: mcp3911: use correct formula for AD conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 06/10] iio: adc: mcp3911: add support for oversampling ratio
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 04/10] iio: adc: mcp3911: add support for interrupts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 04/10] iio: adc: mcp3911: add support for interrupts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 03/10] iio: adc: mcp3911: add support for buffers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/10] iio: adc: mcp3911: add support for phase
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 01/10] iio: adc: mcp3911: correct "microchip,device-addr" property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 02/10] iio: adc: mcp3911: use resource-managed version of iio_device_register
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 01/10] iio: adc: mcp3911: correct "microchip,device-addr" property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 02/10] iio: adc: mcp3911: use resource-managed version of iio_device_register
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: dac: mcp4922: add support to mcp4921
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: Don't use bare "unsigned"
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio/hid: Add mount_matrix
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 08/10] iio: adc: mcp3911: add support for phase
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v2 06/10] iio: adc: mcp3911: add support for oversampling ratio
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v2 09/10] iio: adc: mcp3911: make use of the sign bit
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v2 05/10] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v2 10/10] iio: adc: mcp3911: add support to set PGA
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v2 07/10] iio: adc: mcp3911: use correct formula for AD conversion
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v2 04/10] iio: adc: mcp3911: add support for interrupts
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v2 03/10] iio: adc: mcp3911: add support for buffers
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v2 01/10] iio: adc: mcp3911: correct "microchip,device-addr" property
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH v2 02/10] iio: adc: mcp3911: use resource-managed version of iio_device_register
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v3 02/14] dt-bindings: power: supply: Add Mediatek MT6370 Charger
  • From: Miles Chen <miles.chen@xxxxxxxxxxxx>
• [PATCH] iio/hid: Add mount_matrix
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v3 12/14] leds: mt6370: Add Mediatek MT6370 current sink type LED Indicator support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: dac: mcp4922: add support to mcp4921
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 05/10] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 05/10] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH 06/10] iio: adc: mcp3911: add support for oversampling ratio
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH 10/10] iio: adc: mcp3911: add support to set PGA
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH 08/10] iio: adc: mcp3911: add support for phase
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH 04/10] iio: adc: mcp3911: add support for interrupts
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v3 08/14] usb: typec: tcpci_mt6370: Add Mediatek MT6370 tcpci driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: dac: mcp4922: expand for mcp4921 support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 06/14] dt-bindings: mfd: Add Mediatek MT6370
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 04/14] dt-bindings: leds: Add Mediatek MT6370 flashlight
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 03/14] dt-bindings: leds: mt6370: Add Mediatek mt6370 current sink type LED indicator
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 03/14] dt-bindings: leds: mt6370: Add Mediatek mt6370 current sink type LED indicator
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 09/14] regulator: mt6370: Add mt6370 DisplayBias and VibLDO support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v3 02/14] dt-bindings: power: supply: Add Mediatek MT6370 Charger
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 07/14] mfd: mt6370: Add Mediatek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: dac: mcp4922: expand for mcp4921 support
  • From: Kory Maincent <kory.maincent@xxxxxxxxxxx>
• Re: [PATCH v3 14/14] video: backlight: mt6370: Add Mediatek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH 1/2] iio: dac: mcp4922: add support to mcp4921
  • From: Kory Maincent <kory.maincent@xxxxxxxxxxx>
• Re: [PATCH 05/10] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 05/14] dt-bindings: backlight: Add Mediatek MT6370 backlight
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v3 12/14] leds: mt6370: Add Mediatek MT6370 current sink type LED Indicator support
  • From: szuni chen <szunichen@xxxxxxxxx>
• Re: [PATCH 02/10] iio: adc: mcp3911: use resource-managed version of iio_device_register
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v3 12/14] leds: mt6370: Add Mediatek MT6370 current sink type LED Indicator support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 12/14] leds: mt6370: Add Mediatek MT6370 current sink type LED Indicator support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add rtq6056 support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• [PATCH] iio: Don't use bare "unsigned"
  • From: Joe Simmons-Talbott <joetalbott@xxxxxxxxx>
• Re: [PATCH v2 02/17] regmap-irq: Add get_irq_reg to support unusual register layouts
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH v3 12/14] leds: mt6370: Add Mediatek MT6370 current sink type LED Indicator support
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH 10/10] iio: adc: mcp3911: add support to set PGA
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 06/10] iio: adc: mcp3911: add support for oversampling ratio
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 04/10] iio: adc: mcp3911: add support for interrupts
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 08/10] iio: adc: mcp3911: add support for phase
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 02/10] iio: adc: mcp3911: use resource-managed version of iio_device_register
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 01/10] iio: adc: mcp3911: correct "microchip,device-addr" property
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 11/14] power: supply: mt6370: Add Mediatek MT6370 charger driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 10/14] iio: adc: mt6370: Add Mediatek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 09/14] regulator: mt6370: Add mt6370 DisplayBias and VibLDO support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 08/14] usb: typec: tcpci_mt6370: Add Mediatek MT6370 tcpci driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 07/14] mfd: mt6370: Add Mediatek MT6370 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 10/10] iio: adc: mcp3911: add support to set PGA
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH 10/10] iio: adc: mcp3911: add support to set PGA
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH 09/10] iio: adc: mcp3911: make use of the sign bit
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH 08/10] iio: adc: mcp3911: add support for phase
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH 03/10] iio: adc: mcp3911: add support for buffers
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH 02/10] iio: adc: mcp3911: use resource-managed version of iio_device_register
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH 04/10] iio: adc: mcp3911: add support for interrupts
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH 05/10] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH 01/10] iio: adc: mcp3911: correct "microchip,device-addr" property
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH 07/10] iio: adc: mcp3911: use correct formula for AD conversion
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH 06/10] iio: adc: mcp3911: add support for oversampling ratio
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• Re: (subset) [PATCH v3 00/14] Add Mediatek MT6370 PMIC support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• Re: [PATCH v3 14/14] video: backlight: mt6370: Add Mediatek MT6370 support
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v3 05/14] dt-bindings: backlight: Add Mediatek MT6370 backlight
  • From: Joe Simmons-Talbott <joetalbott@xxxxxxxxx>
• Re: Intel Timed-IO driver in IIO/Counter subsystem
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v3 13/14] leds: flashlight: mt6370: Add Mediatek MT6370 flashlight support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v3 12/14] leds: mt6370: Add Mediatek MT6370 current sink type LED Indicator support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v3 14/14] video: backlight: mt6370: Add Mediatek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v3 09/14] regulator: mt6370: Add mt6370 DisplayBias and VibLDO support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v3 10/14] iio: adc: mt6370: Add Mediatek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v3 08/14] usb: typec: tcpci_mt6370: Add Mediatek MT6370 tcpci driver
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v3 11/14] power: supply: mt6370: Add Mediatek MT6370 charger driver
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v3 07/14] mfd: mt6370: Add Mediatek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v3 06/14] dt-bindings: mfd: Add Mediatek MT6370
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v3 04/14] dt-bindings: leds: Add Mediatek MT6370 flashlight
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v3 05/14] dt-bindings: backlight: Add Mediatek MT6370 backlight
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v3 03/14] dt-bindings: leds: mt6370: Add Mediatek mt6370 current sink type LED indicator
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v3 02/14] dt-bindings: power: supply: Add Mediatek MT6370 Charger
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v3 01/14] dt-bindings: usb: Add Mediatek MT6370 TCPC
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v3 00/14] Add Mediatek MT6370 PMIC support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v2 02/17] regmap-irq: Add get_irq_reg to support unusual register layouts
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 21/36] iio: light: as73211: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Christian Eggers <ceggers@xxxxxxx>
• RE: [PATCH 25/36] iio: temperature: ltc2983: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH] iio: cros: Add cros_ec_sensors_core_register
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3] iio: trigger: warn about non-registered iio trigger getting attempt
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: Questions: IIO type for absorbance and float values in channels?
  • From: Stefan Lengfeld <stefan.lengfeld@xxxxxxxxx>
• Re: [PATCH v8 01/16] clk: generalize devm_clk_get() a bit
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v2 00/17] staging/iio: Clean up AD7746 CDC driver and move from staging.
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• Re: [PATCH 29/36] iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH 30/36] iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH v8 01/16] clk: generalize devm_clk_get() a bit
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v8 01/16] clk: generalize devm_clk_get() a bit
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 19/36] iio: light: al3010: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: David Heidelberg <david@xxxxxxx>
• RE: [PATCH 27/36] iio: adc: imx8qxp: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
  • From: Bough Chen <haibo.chen@xxxxxxx>
• RE: [PATCH 04/36] iio: adc: imx7d_adc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Bough Chen <haibo.chen@xxxxxxx>
• Re: [PATCH v3 5/8] iio: magnetometer: yas530: Change data type of calibration coefficients
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] iio: magnetometer: hmc5843: Remove duplicate 'the'
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 08/36] iio: adc: ti-am335x: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 12/36] iio: dac: ltc1660: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• Re: [PATCH v2] iio: magnetometer: hmc5843: Remove duplicate 'the'
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2] iio: magnetometer: hmc5843: Remove duplicate 'the'
  • From: Jiang Jian <jiangjian@xxxxxxxxxx>
• Re: [PATCH v3 2/3] Input: adc-joystick - Add polled input device support
  • From: Chris Morgan <macromorgan@xxxxxxxxxxx>
• Re: [PATCH] iio:magnetometer:hmc5843: Remove duplicate 'the' in two places.
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 24/36] iio: proximity: cros_ec_mkbp: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v8 01/16] clk: generalize devm_clk_get() a bit
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 32/36] iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 36/36] iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 14/36] iio: dac: max5821: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/4] 3rd set of IIO export namespaces.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 33/36] iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 29/36] iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 22/36] iio: light: bh1750: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 35/36] iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 15/36] iio: dac: mcp4725: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 18/36] iio: health: afe4404: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 21/36] iio: light: as73211: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 16/36] iio: gyro: itg3200: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 19/36] iio: light: al3010: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 27/36] iio: adc: imx8qxp: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 12/36] iio: dac: ltc1660: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 20/36] iio: light: al3320a: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 26/36] iio: light: us5182: Switch from CONFIG_PM guards to pm_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 30/36] iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 25/36] iio: temperature: ltc2983: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 13/36] iio: dac: max517: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 23/36] iio: light: cm3605: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 28/36] iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 17/36] iio: health: afe4403: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 34/36] iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 24/36] iio: proximity: cros_ec_mkbp: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 31/36] iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 10/36] iio: chemical: scd4x: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 11/36] iio: dac: ds4424: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 09/36] iio: adc: xilinx-ams: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 08/36] iio: adc: ti-am335x: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 07/36] iio: adc: stmpe-adc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 06/36] iio: adc: mt6577_auxadc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 05/36] iio: adc: meson_saradc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 04/36] iio: adc: imx7d_adc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 03/36] iio: adc: at91-sam5d2: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 02/36] iio: adc: ad799x: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 01/36] iio: accel: bma220: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 00/36] IIO: switch easy cases to new simpler PM related macros.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 01/16] clk: generalize devm_clk_get() a bit
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: Questions: IIO type for absorbance and float values in channels?
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: cros: Add cros_ec_sensors_core_register
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH] iio:magnetometer:hmc5843: Remove duplicate 'the' in two places.
  • From: Jiang Jian <jiangjian@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: stm32-adc: make safe adc disable
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: stm32-adc: disable adc before calibration
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH v2 00/17] staging/iio: Clean up AD7746 CDC driver and move from staging.
  • From: Joe Simmons-Talbott <joetalbott@xxxxxxxxx>
• Re: Questions: IIO type for absorbance and float values in channels?
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: dac: ad5380: aligned '*' each line and drop unneeded blank line
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: Intel Timed-IO driver in IIO/Counter subsystem
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: Questions: IIO type for absorbance and float values in channels?
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Questions: IIO type for absorbance and float values in channels?
  • From: Stefan Lengfeld <stefan.lengfeld@xxxxxxxxx>
• Re: [PATCH v2 03/15] dt-bindings: leds: mt6370: Add Mediatek mt6370 current sink type LED indicator
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: adc: mxs-lradc-adc: Get rid of OF specifics
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v1 1/1] iio: adc: mxs-lradc-adc: Get rid of OF specifics
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: adc: mxs-lradc-adc: Get rid of OF specifics
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/1] iio: adc: mxs-lradc-adc: Get rid of OF specifics
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: adc: mxs-lradc-adc: Get rid of OF specifics
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 1/1] iio: adc: mxs-lradc-adc: Get rid of OF specifics
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH][next] iio: adc: qcom-spmi-rradc: Fix spelling mistake "coherrency" -> "coherency"
  • From: Colin Ian King <colin.i.king@xxxxxxxxx>
• Re: PM runtime_error handling missing in many drivers?
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH] iio: dac: ad5380: aligned '*' each line and drop unneeded blank line
  • From: Jiang Jian <jiangjian@xxxxxxxxxx>
• Re: [PATCH] iio: aligned '*' each line
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 6/8] iio: magnetometer: yas530: Rename functions and registers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] iio: aligned '*' each line
  • From: Jiang Jian <jiangjian@xxxxxxxxxx>
• Re: [PATCH v2 0/4] 3rd set of IIO export namespaces.
  • From: Joe Simmons-Talbott <joetalbott@xxxxxxxxx>
• Re: [PATCH v2 07/15] Documentation: ABI: testing: mt6370: Add ADC sysfs guideline
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v3 8/8] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v3 8/8] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v3 7/8] iio: magnetometer: yas530: Apply minor cleanups
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v3 6/8] iio: magnetometer: yas530: Rename functions and registers
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v3 5/8] iio: magnetometer: yas530: Change data type of calibration coefficients
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/8] iio: magnetometer: yas530: Correct temperature handling
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/8] iio: magnetometer: yas530: Change range of data in volatile register
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/8] iio: magnetometer: yas530: Change data type of hard_offsets to signed
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: adc: mxs-lradc-adc: Get rid of OF specifics
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v1 1/1] iio: adc: mxs-lradc-adc: Get rid of OF specifics
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v2 16/17] iio: cdc: ad7746: Move driver out of staging.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 11/17] iio: core: Introduce _inputoffset for differential channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 11/17] iio: core: Introduce _inputoffset for differential channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 16/17] iio: cdc: ad7746: Move driver out of staging.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: adc: mxs-lradc-adc: Get rid of OF specifics
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 16/17] iio: cdc: ad7746: Move driver out of staging.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 11/17] iio: core: Introduce _inputoffset for differential channels
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 07/15] Documentation: ABI: testing: mt6370: Add ADC sysfs guideline
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 16/17] iio: cdc: ad7746: Move driver out of staging.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 05/17] staging: iio: cdc: ad7746: Use local buffer for multi byte reads.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 11/17] iio: core: Introduce _inputoffset for differential channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 00/17] staging/iio: Clean up AD7746 CDC driver and move from staging.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 02/17] iio: ABI: Fix wrong format of differential capacitance channel ABI.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 05/17] staging: iio: cdc: ad7746: Use local buffer for multi byte reads.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 16/17] iio: cdc: ad7746: Move driver out of staging.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v5 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: iio: adc: add AD4130
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v5 0/2] AD4130
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH 1/2] iio: adc: stm32-adc: make safe adc disable
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH 0/2] iio: adc: stm32-adc: add checks on adc state
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>