From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
drivers/iio/dac/ds4424.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/dac/ds4424.c b/drivers/iio/dac/ds4424.c
index 3e17a681174e..a16a6a934d9d 100644
--- a/drivers/iio/dac/ds4424.c
+++ b/drivers/iio/dac/ds4424.c
@@ -213,9 +213,9 @@ static const struct iio_info ds4424_info = {
.write_raw = ds4424_write_raw,
};
-static int ds4424_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int ds4424_probe(struct i2c_client *client)
{
+ const struct i2c_device_id *id = i2c_client_get_device_id(client);
struct ds4424_data *data;
struct iio_dev *indio_dev;
int ret;
@@ -312,7 +312,7 @@ static struct i2c_driver ds4424_driver = {
.of_match_table = ds4424_of_match,
.pm = pm_sleep_ptr(&ds4424_pm_ops),
},
- .probe = ds4424_probe,
+ .probe_new = ds4424_probe,
.remove = ds4424_remove,
.id_table = ds4424_id,
};
--
2.38.1
