From: Cosmin Tanislav <cosmin.tanislav@xxxxxxxxxx>
The driver will error out when a custom sensor type is used but a
custom sensor table is not provided. Require it in the binding too.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@xxxxxxxxxx>
---
.../bindings/iio/temperature/adi,ltc2983.yaml | 34 +++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
index 4f26b337c957..bbac5f5cfbb3 100644
--- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
@@ -130,6 +130,15 @@ patternProperties:
- description: Voltage point in nV, signed.
- description: Temperature point in uK.
+ allOf:
+ - if:
+ properties:
+ adi,sensor-type:
+ const: 9
+ then:
+ required:
+ - adi,custom-thermocouple
+
"^diode@":
type: object
description:
@@ -263,6 +272,15 @@ patternProperties:
dependencies:
adi,current-rotate: [ "adi,rsense-share" ]
+ allOf:
+ - if:
+ properties:
+ adi,sensor-type:
+ const: 18
+ then:
+ required:
+ - adi,custom-rtd
+
"^thermistor@":
type: object
description:
@@ -349,6 +367,22 @@ patternProperties:
dependencies:
adi,current-rotate: [ "adi,rsense-share" ]
+ allOf:
+ - if:
+ properties:
+ adi,sensor-type:
+ const: 26
+ then:
+ required:
+ - adi,custom-steinhart
+ - if:
+ properties:
+ adi,sensor-type:
+ const: 27
+ then:
+ required:
+ - adi,custom-thermistor
+
"^adc@":
type: object
description: Represents a channel which is being used as a direct adc.
--
2.38.1
