On Sun, 6 Nov 2022 17:14:58 +0000 Jonathan Cameron <jic23@xxxxxxxxxx> wrote: > On Thu, 3 Nov 2022 15:00:28 +0200 > Cosmin Tanislav <demonsingur@xxxxxxxxx> wrote: > > > Add support for the following parts: > > * LTC2984 > > * LTC2986 > > * LTM2985 > > > > The LTC2984 is a variant of the LTC2983 with EEPROM. > > The LTC2986 is a variant of the LTC2983 with only 10 channels, > > EEPROM and support for active analog temperature sensors. > > The LTM2985 is software-compatible with the LTC2986. > > > > Also, make bulk write buffer DMA-safe. > > Besides that, refine the binding. > Replying at least partly so I can see I already looked at this... > > Looks good to me. Will pick up once DT bindings maintainers are > happy. Series applied to the togreg branch of iio.git and initially pushed out as testing. I tweaked patch 11 as requested whilst applying. Thanks, Jonathan > > Thanks, > > Jonathan > > > > > V1 -> V2: > > * add Fixes tag > > * add patch that fixes the regmap_bulk_write() call with stack allocated > > buffer > > * add patch that refines the binding in preperation for adding new > > parts support to it > > * do not use stack allocated buffer for writing the EEPROM key > > > > V2 -> V3: > > * drop minItems if equal to maxItems > > * drop adi,single-ended conditions because of recent dtschema > > restrictions (even though they're valid in jsonschema and the last > > dtschema tag) > > * drop "allocate iio channels once" patch since it's been picked as a fix > > > > V3 -> V4: > > * add pipe for 'adi,mux-delay-config-us' description > > * add pipe for 'adi,rtd-curve' description > > * keep newlines after descriptions > > * move 'adi,current-rotate' to conditional > > * put 'adi,custom-steinhart' in the original place > > * keep 'minItems' for 'adi,custom-steinhart' > > * override 'enum' to forbid auto-range in 'adi,excitation-current-nanoamp' > > when using custom thermistors > > * split refine patch into multiple patches > > - use generic node name in example > > - describe broken mux delay property > > - refine descriptions > > - change default excitation for custom thermistors > > - require 4 wire rtd for current rotate > > - require custom sensor tables > > - describe matrix items > > - remove qutations from phandle ref > > - use hex for sensor address > > - add default values > > > > Cosmin Tanislav (13): > > iio: temperature: ltc2983: make bulk write buffer DMA-safe > > dt-bindings: iio: temperature: ltc2983: add default values > > dt-bindings: iio: temperature: ltc2983: use hex for sensor address > > dt-bindings: iio: temperature: ltc2983: remove qutations from phandle > > ref > > dt-bindings: iio: temperature: ltc2983: describe matrix items > > dt-bindings: iio: temperature: ltc2983: require custom sensor tables > > dt-bindings: iio: temperature: ltc2983: require 4 wire rtd for current > > rotate > > dt-bindings: iio: temperature: ltc2983: change default excitation for > > custom thermistors > > dt-bindings: iio: temperature: ltc2983: refine descriptions > > dt-bindings: iio: temperature: ltc2983: describe broken mux delay > > property > > dt-bindings: iio: temperature: ltc2983: use generic node name in > > example > > dt-bindings: iio: temperature: ltc2983: support more parts > > iio: temperature: ltc2983: support more parts > > > > .../bindings/iio/temperature/adi,ltc2983.yaml | 335 +++++++++++------- > > drivers/iio/temperature/ltc2983.c | 193 +++++++++- > > 2 files changed, 389 insertions(+), 139 deletions(-) > > >
