Linux IIO Development

• Thread Index

• [PATCH v2 07/17] staging: iio: cdc: ad7764: Push locking down into case statements in read/write_raw
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 01/17] iio: core: Increase precision of IIO_VAL_FRACTIONAL_LOG2 when possible
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 02/17] iio: ABI: Fix wrong format of differential capacitance channel ABI.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 05/17] staging: iio: cdc: ad7746: Use local buffer for multi byte reads.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 00/17] staging/iio: Clean up AD7746 CDC driver and move from staging.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 04/17] staging: iio: cdc: ad7746: Push handling of supply voltage scale to userspace.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 06/16] dt-bindings: gpio: Add AXP192 GPIO bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PULL] 1st set of IIO fixes for 5.19
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] Input: adc-joystick - Add polled input device support
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-adc: Use generic_handle_domain_irq()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] Input: adc-joystick - Add polled input device support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 11/16] iio: adc: axp20x_adc: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH v3 00/16] Add support for AXP192 PMIC
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH] iio: accel: mxc4005: report orientation of accelerometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: accel: bma400: Add support for single and double tap events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: Document ltrf216a light sensor bindings
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: Add new event type gesture and use direction for single and double tap
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: accel: bma400: Add support for single and double tap events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: light: Add support for ltrf216a sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: Document ltrf216a light sensor bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 14/16] power: axp20x_battery: Add constant charge current table
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 13/16] pinctrl: Add AXP192 pin control driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add rtq6056 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 13/16] pinctrl: Add AXP192 pin control driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 06/16] dt-bindings: gpio: Add AXP192 GPIO bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 00/16] Add support for AXP192 PMIC
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 00/16] Add support for AXP192 PMIC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 11/16] iio: adc: axp20x_adc: Add support for AXP192
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 12/16] power: supply: axp20x_usb_power: Add support for AXP192
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 11/16] iio: adc: axp20x_adc: Add support for AXP192
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 10/16] iio: adc: axp20x_adc: Minor code cleanups
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 10/16] iio: adc: axp20x_adc: Minor code cleanups
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 8/8] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 09/16] regulator: axp20x: Add support for AXP192
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 08/16] mfd: axp20x: Add support for AXP192
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add rtq6056 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 8/8] iio: magnetometer: yas530: Add YAS537 variant
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: Add rtq6056 adc support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 10/16] iio: adc: axp20x_adc: Minor code cleanups
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v3 05/16] dt-bindings: power: supply: axp20x: Add AXP192 compatible
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v3 12/16] power: supply: axp20x_usb_power: Add support for AXP192
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v3 04/16] dt-bindings: iio: adc: axp209: Add AXP192 compatible
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v3 03/16] dt-bindings: mfd: add bindings for AXP192 MFD device
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v3 13/16] pinctrl: Add AXP192 pin control driver
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v3 08/16] mfd: axp20x: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v3 15/16] power: axp20x_battery: Support battery status without fuel gauge
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v3 05/16] dt-bindings: power: supply: axp20x: Add AXP192 compatible
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v3 14/16] power: axp20x_battery: Add constant charge current table
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v3 06/16] dt-bindings: gpio: Add AXP192 GPIO bindings
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v3 04/16] dt-bindings: iio: adc: axp209: Add AXP192 compatible
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v3 11/16] iio: adc: axp20x_adc: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v3 13/16] pinctrl: Add AXP192 pin control driver
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v3 12/16] power: supply: axp20x_usb_power: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v3 07/16] dt-bindings: power: axp20x-battery: Add AXP192 compatible
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v3 16/16] power: axp20x_battery: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v3 09/16] regulator: axp20x: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v3 10/16] iio: adc: axp20x_adc: Minor code cleanups
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v3 03/16] dt-bindings: mfd: add bindings for AXP192 MFD device
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v3 02/16] regmap-irq: Add get_irq_reg to support unusual register layouts
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v3 01/16] regmap-irq: Use sub_irq_reg() to calculate unmask register address
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v3 00/16] Add support for AXP192 PMIC
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH v3 1/6] iio: adc: mp2629: fix wrong comparison of channel
  • From: saravanan sekar <sravanhome@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: Add rtq6056 adc support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: Add rtq6056 adc support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 20/34] iio: inkern: only relase the device node when done with it
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v6 08/14] iio: imu: add Bosch Sensortec BNO055 core driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: Add rtq6056 adc support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: Add imx6ul & imx6sx compatibles
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] proximity: vl53l0x: Make VDD regulator actually optional
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:proximity:sx9324: Check ret value of device_property_read_u32_array()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: add include/dt-bindings/iio to IIO SUBSYSTEM AND DRIVERS
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: accel: mma8452: ignore the return value of reset operation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio/accel: Fix adi,adxl345/6 example I2C address
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/6] iio: adc: mp2629: fix wrong comparison of channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v14 00/10] iio: adc: introduce Qualcomm SPMI Round Robin ADC
  • From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
• Re: [PATCH v3 4/6] iio: adc: mp2629: restrict input voltage mask for mp2629
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 11/15] iio: adc: mt6370: Add Mediatek MT6370 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: Add rtq6056 adc support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add rtq6056 support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [PATCH v2 08/15] mfd: mt6370: Add Mediatek MT6370 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 07/15] Documentation: ABI: testing: mt6370: Add ADC sysfs guideline
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: Fix typo in comment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: dac: stm32-dac: Replace open coded str_enable_disable()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: accel: mma7660: Drop wrong use of ACPI_PTR()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 8/8] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add rtq6056 support
  • From: ChiYuan Huang <u0084500@xxxxxxxxx>
• Re: [PATCH v3 6/8] iio: magnetometer: yas530: Rename functions and registers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/8] iio: magnetometer: yas530: Change data type of calibration coefficients
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/8] iio: magnetometer: yas530: Correct temperature handling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/8] iio: magnetometer: yas530: Change range of data in volatile register
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/8] iio: magnetometer: yas530: Change data type of hard_offsets to signed
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 7/7] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 22/34] iio: inkern: only return error codes in iio_channel_get_*() APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:light:tsl2563: Replace cancel_delayed_work() with cancel_delayed_work_sync().
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio:light:tsl2563: Replace flush_scheduled_work() with cancel_delayed_work_sync().
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: trigger: warn about non-registered iio trigger getting attempt
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/4] 3rd set of IIO export namespaces.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v14 00/10] iio: adc: introduce Qualcomm SPMI Round Robin ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v14 00/10] iio: adc: introduce Qualcomm SPMI Round Robin ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v14 02/10] mfd: qcom-spmi-pmic: expose the PMIC revid information to clients
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 8/8] iio: magnetometer: yas530: Add YAS537 variant
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 7/8] iio: magnetometer: yas530: Apply minor cleanups
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• RE: Intel Timed-IO driver in IIO/Counter subsystem
  • From: "Hall, Christopher S" <christopher.s.hall@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: Add rtq6056 adc support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: Intel Timed-IO driver in IIO/Counter subsystem
  • From: "Hall, Christopher S" <christopher.s.hall@xxxxxxxxx>
• [PATCH v3 8/8] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v3 6/8] iio: magnetometer: yas530: Rename functions and registers
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v3 7/8] iio: magnetometer: yas530: Apply minor cleanups
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v3 5/8] iio: magnetometer: yas530: Change data type of calibration coefficients
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v3 4/8] iio: magnetometer: yas530: Correct temperature handling
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v3 3/8] iio: magnetometer: yas530: Correct scaling of magnetic axes
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v3 2/8] iio: magnetometer: yas530: Change range of data in volatile register
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v3 1/8] iio: magnetometer: yas530: Change data type of hard_offsets to signed
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v3 0/8] Add support for magnetometer Yamaha YAS537
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v2 05/15] dt-bindings: backlight: Add Mediatek MT6370 backlight
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 02/15] dt-bindings: power: supply: Add Mediatek MT6370 Charger
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: Add imx6ul & imx6sx compatibles
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 06/15] dt-bindings: mfd: Add Mediatek MT6370
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: imu: Add CEVA BNO08x driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: imu: Add CEVA BNO08x driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 08/15] mfd: mt6370: Add Mediatek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: Intel Timed-IO driver in IIO/Counter subsystem
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add rtq6056 support
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add rtq6056 support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 32/34] iio: adc: stm32-adc: convert to device properties
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH 10/10] pinctrl: Add AXP192 pin control driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] iio: adc: Fix refcount leak bug in aspeed_adc
  • From: Liang He <windhl@xxxxxxx>
• Re: [PATCH v3 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: Intel Timed-IO driver in IIO/Counter subsystem
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH 10/10] pinctrl: Add AXP192 pin control driver
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: Intel Timed-IO driver in IIO/Counter subsystem
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 06/15] dt-bindings: mfd: Add Mediatek MT6370
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v2 06/15] dt-bindings: mfd: Add Mediatek MT6370
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v2 05/15] dt-bindings: backlight: Add Mediatek MT6370 backlight
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v2 02/15] dt-bindings: power: supply: Add Mediatek MT6370 Charger
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: Intel Timed-IO driver in IIO/Counter subsystem
  • From: "Shevchenko, Andriy" <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 15/15] video: backlight: mt6370: Add Mediatek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH 2/2] iio: adc: Add rtq6056 support
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: adc: Add rtq6056 adc support
  • From: cy_huang <u0084500@xxxxxxxxx>
• [PATCH 0/2] Add Richtek RTQ6056 support
  • From: cy_huang <u0084500@xxxxxxxxx>
• Re: [PATCH v2 11/15] iio: adc: mt6370: Add Mediatek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH v2 10/15] regulator: mt6370: Add mt6370 DisplayBias and VibLDO support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: Intel Timed-IO driver in IIO/Counter subsystem
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Intel Timed-IO driver in IIO/Counter subsystem
  • From: "N, Pandith" <pandith.n@xxxxxxxxx>
• Recall: Intel Timed-IO driver in IIO/Counter subsystem
  • From: "N, Pandith" <pandith.n@xxxxxxxxx>
• [PATCH v1 1/1] iio: dac: stm32-dac: Replace open coded str_enable_disable()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 06/15] dt-bindings: mfd: Add Mediatek MT6370
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 05/15] dt-bindings: backlight: Add Mediatek MT6370 backlight
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 04/15] dt-bindings: leds: Add Mediatek MT6370 flashlight
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 03/15] dt-bindings: leds: mt6370: Add Mediatek mt6370 current sink type LED indicator
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 01/15] dt-bindings: usb: Add Mediatek MT6370 TCPC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 02/15] dt-bindings: power: supply: Add Mediatek MT6370 Charger
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH 12/16] dt-bindings: iio: adc: at91-sama5d2_adc: add id for temperature channel
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v1 1/1] iio: accel: mma7660: Drop wrong use of ACPI_PTR()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio: Fix typo in comment
  • From: Xiang wangx <wangxiang@xxxxxxxxxx>
• Re: [PATCH v3] iio: trigger: warn about non-registered iio trigger getting attempt
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: stx104: Implement and utilize register structures
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 31/34] iio: adc: qcom-spmi-adc5: convert to device properties
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 30/34] iio: adc: qcom-spmi-vadc: convert to device properties
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: imu: Add CEVA BNO08x driver
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: imu: Add CEVA BNO08x driver
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: imu: Add CEVA BNO08x driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 3/3] dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v3 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: vendor-prefixes: add MEMSensing Microsystems Co., Ltd.
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v3 0/3] iio: accel: add MSA311 accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: imu: Add CEVA BNO08x driver
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: imu: Add CEVA BNO08x driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] staging: iio: imu: Add CEVA BNO08x driver
  • From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: staging: iio: imu: Document CEVA BNO08x
  • From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
• [PATCH 0/2] staging: iio: imu: Add CEVA BNO08x through the staging tree
  • From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
• Re: [PATCH v3] iio: trigger: warn about non-registered iio trigger getting attempt
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• RE: [PATCH v2] iio: accel: mma8452: ignore the return value of reset operation
  • From: Bough Chen <haibo.chen@xxxxxxx>
• [PATCH] dt-bindings: iio/accel: Fix adi,adxl345/6 example I2C address
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 2/6] dt-bindings: mfd: Add mp2733 compatible
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 08/15] mfd: mt6370: Add Mediatek MT6370 support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 7/7] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v2 7/7] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v2 7/7] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v14 02/10] mfd: qcom-spmi-pmic: expose the PMIC revid information to clients
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v14 03/10] mfd: qcom-spmi-pmic: read fab id on supported PMICs
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [v6 12/14] iio: imu: add BNO055 serdev driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 4/7] iio: magnetometer: yas530: Correct temperature handling
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [v6 12/14] iio: imu: add BNO055 serdev driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 1/1] iio: adc: intel_mrfld_adc: explicitly add proper header files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: accel: mma8452: ignore the return value of reset operation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v6 12/14] iio: imu: add BNO055 serdev driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 1/1] iio: adc: intel_mrfld_adc: explicitly add proper header files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 10/10] pinctrl: Add AXP192 pin control driver
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: Document ltrf216a light sensor bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: light: Add support for ltrf216a sensor
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] iio: accel: mma8452: ignore the return value of reset operation
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 4/6] iio: adc: mp2629: restrict input voltage mask for mp2629
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v3 3/6] mfd: mp2629: Add support for mps mp2733 battery charger
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v3 2/6] dt-bindings: mfd: Add mp2733 compatible
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v3 5/6] power: supply: Add support for mp2733 battery charger
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v3 6/6] power: supply: mp2629: Add USB fast charge settings
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v3 1/6] iio: adc: mp2629: fix wrong comparison of channel
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v3 0/6] Add support for mp2733 battery charger
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• Re: [PATCH 10/10] pinctrl: Add AXP192 pin control driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 27/34] iio: adc: ab8500-gpadc: convert to device properties
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 29/34] iio: adc: qcom-pm8xxx-xoadc: convert to device properties
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v6 1/2] dt-bindings: Document ltrf216a light sensor bindings
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• [PATCH v6 2/2] iio: light: Add support for ltrf216a sensor
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• [PATCH v6 0/2] Add LTRF216A Driver
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• Re: [PATCH 10/10] pinctrl: Add AXP192 pin control driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: stx104: Implement and utilize register structures
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: iio: adc: add AD4130
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: stx104: Implement and utilize register structures
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• RE: [PATCH v1 1/1] iio: adc: intel_mrfld_adc: explicitly add proper header files
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• [PATCH v1 1/1] iio: adc: intel_mrfld_adc: explicitly add proper header files
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: stx104: Implement and utilize register structures
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: stx104: Implement and utilize register structures
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH v2 1/2] iio: proximity: sx_common: Don't use IIO device for properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/2] iio: proximity: sx_common: Allow IIO core to take care of firmware node
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2] iio: accel: mma8452: ignore the return value of reset operation
  • From: haibo.chen@xxxxxxx
• RE: [PATCH] iio: accel: mma8452: remove the reset operation during driver probe
  • From: Bough Chen <haibo.chen@xxxxxxx>
• [PATCH] iio: accel: mxc4005: report orientation of accelerometer
  • From: Quentin Schulz <foss+kernel@xxxxxxxxx>
• Re: [PATCH v2 1/6] iio: adc: mp2629: fix wrong comparison of channel
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 4/6] iio: adc: mp2629: restrict input voltage mask for mp2629
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 6/6] power: supply: mp2629: Add usb fast charge settings
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 3/6] mfd: mp2629: Add support for mps mp2733 battery charger
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: stx104: Implement and utilize register structures
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/6] dt-bindings: mfd: Add mp2733 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/6] dt-bindings: mfd: Add mp2733 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 6/6] power: supply: mp2629: Add usb fast charge settings
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v2 5/6] power: supply: Add support for mp2733 battery charger
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v2 4/6] iio: adc: mp2629: restrict input voltage mask for mp2629
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v2 3/6] mfd: mp2629: Add support for mps mp2733 battery charger
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v2 1/6] iio: adc: mp2629: fix wrong comparison of channel
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH v2 2/6] dt-bindings: mfd: Add mp2733 compatible
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• Re: [PATCH v1 2/2] iio: accel: bma400: Add support for single and double tap events
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH 3/6] mfd: mp2629: Add support for mps mp2733 battery charger
  • From: saravanan sekar <sravanhome@xxxxxxxxx>
• Re: [PATCH 2/2] iio: dac: cio-dac: Implement and utilize register structures
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH 6/6] power: supply: mp2629: Add usb fast charge settings
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 5/6] power: supply: Add support for mp2733 battery charger
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: stx104: Implement and utilize register structures
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH] counter: 104-quad-8: Implement and utilize register structures
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH 4/6] iio: adc: mp2629: restrict input voltage mask for mp2629
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 3/6] mfd: mp2629: Add support for mps mp2733 battery charger
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [v6 08/14] iio: imu: add Bosch Sensortec BNO055 core driver
  • From: Andrea Merello <andrea.merello@xxxxxxxxx>
• [PATCH 4/6] iio: adc: mp2629: restrict input voltage mask for mp2629
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH 1/6] iio: adc: mp2629: fix wrong comparison of channel
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH 2/6] dt-bindings: mfd: Add mp2733 compatible
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH 3/6] mfd: mp2629: Add support for mps mp2733 battery charger
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH 5/6] power: supply: Add support for mp2733 battery charger
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• [PATCH 6/6] power: supply: mp2629: Add usb fast charge settings
  • From: Saravanan Sekar <sravanhome@xxxxxxxxx>
• Re: [v6 08/14] iio: imu: add Bosch Sensortec BNO055 core driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [v6 14/14] docs: iio: add documentation for BNO055 driver
  • From: <andrea.merello@xxxxxx>
• [v6 04/14] iio: add modifers for pitch, yaw, roll
  • From: <andrea.merello@xxxxxx>
• Re: [v6 08/14] iio: imu: add Bosch Sensortec BNO055 core driver
  • From: Andrea Merello <Andrea.Merello@xxxxxx>
• [v6 12/14] iio: imu: add BNO055 serdev driver
  • From: <andrea.merello@xxxxxx>
• [v6 02/14] iio: document linear acceleration modifiers
  • From: <andrea.merello@xxxxxx>
• [v6 00/14] Add support for Bosch BNO055 IMU
  • From: <andrea.merello@xxxxxx>
• [v6 06/14] iio: event_monitor: add pitch, yaw and roll modifiers
  • From: <andrea.merello@xxxxxx>
• [v6 10/14] iio: document "serialnumber" sysfs attribute
  • From: <andrea.merello@xxxxxx>
• Re: [v6 08/14] iio: imu: add Bosch Sensortec BNO055 core driver
  • From: Andrea Merello <Andrea.Merello@xxxxxx>
• [v6 13/14] iio: imu: add BNO055 I2C driver
  • From: <andrea.merello@xxxxxx>
• [v6 08/14] iio: imu: add Bosch Sensortec BNO055 core driver
  • From: <andrea.merello@xxxxxx>
• [v6 05/14] iio: document pitch, yaw, roll modifiers
  • From: <andrea.merello@xxxxxx>
• [v6 03/14] iio: event_monitor: add linear acceleration modifiers
  • From: <andrea.merello@xxxxxx>
• [v6 11/14] dt-bindings: iio/imu: Add Bosch BNO055
  • From: <andrea.merello@xxxxxx>
• [v6 07/14] iio: add support for binary attributes
  • From: <andrea.merello@xxxxxx>
• [v6 01/14] iio: add modifiers for linear acceleration
  • From: <andrea.merello@xxxxxx>
• [v6 09/14] iio: document bno055 private sysfs attributes
  • From: <andrea.merello@xxxxxx>
• Re: [PATCH 15/16] iio: adc: at91-sama5d2_adc: add runtime pm support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 13/16] iio: adc: at91-sama5d2_adc: add support for temperature sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 11/16] iio: adc: at91-sama5d2_adc: add locking parameter to at91_adc_read_info_raw()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 07/16] iio: adc: at91-sama5d2_adc: simplify the code in at91_adc_read_info_raw()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/2] Add LTRF216A Driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] proximity: vl53l0x: Make VDD regulator actually optional
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: dac: cio-dac: Implement and utilize register structures
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: stx104: Implement and utilize register structures
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] counter: 104-quad-8: Implement and utilize register structures
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [v6 08/14] iio: imu: add Bosch Sensortec BNO055 core driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 3/5] proximity: vl53l0x: Handle the VDD regulator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: proximity: sx_common: Allow IIO core to take care of firmware node
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 00/16] iio: adc: at91-sama5d2_adc: add support for temperature sensor
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH 15/16] iio: adc: at91-sama5d2_adc: add runtime pm support
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] proximity: vl53l0x: Handle the VDD regulator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v14 04/10] dt-bindings: iio: adc: document qcom-spmi-rradc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v14 05/10] iio: adc: qcom-spmi-rradc: introduce round robin adc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v14 02/10] mfd: qcom-spmi-pmic: expose the PMIC revid information to clients
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: Use octal permissions and DEVICE_ATTR_{RO,RW}.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 13/16] iio: adc: at91-sama5d2_adc: add support for temperature sensor
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/6] iio: adc: meson_saradc: Don't attach managed resource to IIO device object
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: proximity: sx_common: Allow IIO core to take care of firmware node
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 2/2] iio: accel: bma400: Add support for single and double tap events
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 11/16] iio: adc: at91-sama5d2_adc: add locking parameter to at91_adc_read_info_raw()
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH 07/16] iio: adc: at91-sama5d2_adc: simplify the code in at91_adc_read_info_raw()
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH v14 01/10] spmi: add a helper to look up an SPMI device from a device node
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 06/16] iio: adc: at91-sama5d2_adc: add 64 and 256 oversampling ratio
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH 04/16] iio: adc: at91-sama5d2_adc: handle different EMR.OSR for different hw versions
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH 03/16] iio: adc: at91-sama5d2_adc: exit from write_raw() when buffers are enabled
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH 02/16] iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [PATCH] iio:proximity:sx9324: Check ret value of device_property_read_u32_array()
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH] iio:proximity:sx9324: Check ret value of device_property_read_u32_array()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: proximity: sx_common: Allow IIO core to take care of firmware node
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v2 11/15] iio: adc: mt6370: Add Mediatek MT6370 support
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v2 15/15] video: backlight: mt6370: Add Mediatek MT6370 support
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v2 13/15] leds: mt6370: Add Mediatek MT6370 current sink type LED Indicator support
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v2 08/15] mfd: mt6370: Add Mediatek MT6370 support
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v2 10/15] regulator: mt6370: Add mt6370 DisplayBias and VibLDO support
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v1 0/2] iio: Add single and double tap events support
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v1 2/2] iio: accel: bma400: Add support for single and double tap events
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v1 1/2] iio: Add new event type gesture and use direction for single and double tap
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: Add imx6ul & imx6sx compatibles
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 15/15] video: backlight: mt6370: Add Mediatek MT6370 support
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [v6 12/14] iio: imu: add BNO055 serdev driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [v6 08/14] iio: imu: add Bosch Sensortec BNO055 core driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 4/7] iio: magnetometer: yas530: Correct temperature handling
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 7/7] iio: magnetometer: yas530: Add YAS537 variant
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 0/7] Add support for magnetometer Yamaha YAS537
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 7/7] iio: magnetometer: yas530: Add YAS537 variant
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 06/15] dt-bindings: mfd: Add Mediatek MT6370
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: light: Add support for ltrf216a sensor
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• [PATCH] dt-bindings: iio: adc: Add imx6ul & imx6sx compatibles
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• [PATCH v2 00/15] Add Mediatek MT6370 PMIC support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v2 11/15] iio: adc: mt6370: Add Mediatek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v2 05/15] dt-bindings: backlight: Add Mediatek MT6370 backlight
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v2 06/15] dt-bindings: mfd: Add Mediatek MT6370
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v2 14/15] leds: flashlight: mt6370: Add Mediatek MT6370 flashlight support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v2 04/15] dt-bindings: leds: Add Mediatek MT6370 flashlight
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v2 09/15] usb: typec: tcpci_mt6370: Add Mediatek MT6370 tcpci driver
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v2 10/15] regulator: mt6370: Add mt6370 DisplayBias and VibLDO support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v2 08/15] mfd: mt6370: Add Mediatek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v2 03/15] dt-bindings: leds: mt6370: Add Mediatek mt6370 current sink type LED indicator
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v2 07/15] Documentation: ABI: testing: mt6370: Add ADC sysfs guideline
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v2 02/15] dt-bindings: power: supply: Add Mediatek MT6370 Charger
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH] MAINTAINERS: add include/dt-bindings/iio to IIO SUBSYSTEM AND DRIVERS
  • From: Lukas Bulwahn <lukas.bulwahn@xxxxxxxxx>
• [PATCH v2 01/15] dt-bindings: usb: Add Mediatek MT6370 TCPC
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v2 15/15] video: backlight: mt6370: Add Mediatek MT6370 support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v2 13/15] leds: mt6370: Add Mediatek MT6370 current sink type LED Indicator support
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• [PATCH v2 12/15] power: supply: mt6370: Add Mediatek MT6370 charger driver
  • From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
• Re: [PATCH 34/34] iio: inkern: fix coding style warnings
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 20/34] iio: inkern: only relase the device node when done with it
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 22/34] iio: inkern: only return error codes in iio_channel_get_*() APIs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v2 7/7] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v2 5/7] iio: magnetometer: yas530: Change data type of calibration coefficients
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v2 6/7] iio: magnetometer: yas530: Rename functions and registers
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v2 4/7] iio: magnetometer: yas530: Correct temperature handling
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v2 3/7] iio: magnetometer: yas530: Correct scaling of magnetic axes
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v2 2/7] iio: magnetometer: yas530: Change range of data in volatile register
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v2 1/7] iio: magnetometer: yas530: Change data type of hard_offsets to signed
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v2 0/7] Add support for magnetometer Yamaha YAS537
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH 34/34] iio: inkern: fix coding style warnings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] iio:light:tsl2563: Replace cancel_delayed_work() with cancel_delayed_work_sync().
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] iio:light:tsl2563: Replace flush_scheduled_work() with cancel_delayed_work_sync().
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH 3/5] proximity: vl53l0x: Handle the VDD regulator
  • From: Luca Weiss <luca@xxxxxxxxx>
• Re: [PATCH v1 1/1] iio: adc: sc27xx_adc: Re-use generic struct u32_fract
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC 2/2] iio: accel: bma400: Add support for single and double tap events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/5] proximity: vl53l0x: Handle the VDD regulator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: at91-sama5d2: Limit requested watermark value to hwfifo size
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 7/7] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH 7/7] iio: magnetometer: yas530: Add YAS537 variant
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RESEND PATCH 0/5] IIO: Where dev_pm_ops rework and namespaces meet (4-8)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 11/17] iio: adc: axp20x_adc: Consolidate ADC raw read functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 00/16] iio: adc: at91-sama5d2_adc: add support for temperature sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 13/16] iio: adc: at91-sama5d2_adc: add support for temperature sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 11/16] iio: adc: at91-sama5d2_adc: add locking parameter to at91_adc_read_info_raw()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 07/16] iio: adc: at91-sama5d2_adc: simplify the code in at91_adc_read_info_raw()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 06/16] iio: adc: at91-sama5d2_adc: add 64 and 256 oversampling ratio
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 04/16] iio: adc: at91-sama5d2_adc: handle different EMR.OSR for different hw versions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 03/16] iio: adc: at91-sama5d2_adc: exit from write_raw() when buffers are enabled
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 02/16] iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 15/16] iio: adc: at91-sama5d2_adc: add runtime pm support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 16/16] iio: adc: at91-sama5d2_adc: use pm_ptr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32: fix maximum clock rate for stm32mp15x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32: fix vrefint wrong calibration value handling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/1] iio:proximity:sx9360: Fix hardware gain read/write
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 32/34] iio: adc: stm32-adc: convert to device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 24/34] iio: inkern: move to fwnode properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 22/34] iio: inkern: only return error codes in iio_channel_get_*() APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 20/34] iio: inkern: only relase the device node when done with it
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 01/17] regmap-irq: Use sub_irq_reg() to calculate unmask register address
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH v2 02/17] regmap-irq: Add get_irq_reg to support unusual register layouts
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH 19/34] iio: core: drop of.h from iio.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 16/34] iio: light: cros_ec_light_prox: explicitly add proper header files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 15/34] iio: humidity: hts221_buffer: explicitly add proper header files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 14/34] iio: dac: vf610_dac: explicitly add proper header files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 13/34] iio: dac: stm32-dac: explicitly add proper header files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 12/34] iio: common: cros_ec_sensors: explicitly add proper header files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 11/34] iio: common: cros_ec_lid_angle: explicitly add proper header files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 10/34] iio: adc: rzg2l_adc: explicitly add proper header files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 09/34] iio: adc: npcm_adc: explicitly add proper header files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/34] iio: adc: mt6360-adc: explicitly add proper header files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 7/7] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH 07/34] iio: adc: mp2629_adc: explicitly add proper header files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 06/34] iio: adc: ingenic-adc: explicitly add proper header files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 05/34] iio: adc: imx8qxp-adc: explicitly add proper header files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 04/34] iio: adc: imx7d_adc: explicitly add proper header files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 03/34] iio: adc: berlin2-adc: explicitly add proper header files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 02/34] iio: adc: ad7606_par: explicitly add proper header files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 01/34] iio: adc: ad7606: explicitly add proper header files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 04/49] iio: fix opencoded for_each_set_bit()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 7/7] iio: magnetometer: yas530: Add YAS537 variant
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 7/7] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH 20/34] iio: inkern: only relase the device node when done with it
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 24/34] iio: inkern: move to fwnode properties
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 34/34] iio: inkern: fix coding style warnings
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 06/34] iio: adc: ingenic-adc: explicitly add proper header files
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 22/34] iio: inkern: only return error codes in iio_channel_get_*() APIs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 25/34] thermal: qcom: qcom-spmi-adc-tm5: convert to IIO fwnode API
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 02/17] regmap-irq: Add get_irq_reg to support unusual register layouts
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 34/34] iio: inkern: fix coding style warnings
  • From: Joe Simmons-Talbott <joetalbott@xxxxxxxxx>
• Re: [PATCH v2 15/17] power: axp20x_battery: Add constant charge current table
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH v2 02/17] regmap-irq: Add get_irq_reg to support unusual register layouts
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH 00/34] make iio inkern interface firmware agnostic
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 25/34] thermal: qcom: qcom-spmi-adc-tm5: convert to IIO fwnode API
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 24/34] iio: inkern: move to fwnode properties
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 23/34] iio: inkern: split of_iio_channel_get_by_name()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 22/34] iio: inkern: only return error codes in iio_channel_get_*() APIs
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 21/34] iio: inkern: fix return value in devm_of_iio_channel_get_by_name()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 20/34] iio: inkern: only relase the device node when done with it
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 00/34] make iio inkern interface firmware agnostic
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 15/34] iio: humidity: hts221_buffer: explicitly add proper header files
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 06/34] iio: adc: ingenic-adc: explicitly add proper header files
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/1] iio:proximity:sx9360: Fix hardware gain read/write
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 7/7] iio: magnetometer: yas530: Add YAS537 variant
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 6/7] iio: magnetometer: yas530: Remove redundant defaults on switch devid
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 4/7] iio: magnetometer: yas530: Change data type of hard_offsets to signed
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 33/34] iio: inkern: remove OF dependencies
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 32/34] iio: adc: stm32-adc: convert to device properties
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 34/34] iio: inkern: fix coding style warnings
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 31/34] iio: adc: qcom-spmi-adc5: convert to device properties
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 30/34] iio: adc: qcom-spmi-vadc: convert to device properties
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 29/34] iio: adc: qcom-pm8xxx-xoadc: convert to device properties
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 28/34] iio: adc: at91-sama5d2_adc: convert to device properties
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 25/34] thermal: qcom: qcom-spmi-adc-tm5: convert to IIO fwnode API
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 27/34] iio: adc: ab8500-gpadc: convert to device properties
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 26/34] iio: adc: ingenic-adc: convert to IIO fwnode interface
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 24/34] iio: inkern: move to fwnode properties
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 23/34] iio: inkern: split of_iio_channel_get_by_name()
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 22/34] iio: inkern: only return error codes in iio_channel_get_*() APIs
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 21/34] iio: inkern: fix return value in devm_of_iio_channel_get_by_name()
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 20/34] iio: inkern: only relase the device node when done with it
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 19/34] iio: core: drop of.h from iio.h
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 17/34] iio: pressure: cros_ec_baro: explicitly add proper header files
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 01/34] iio: adc: ad7606: explicitly add proper header files
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 09/34] iio: adc: npcm_adc: explicitly add proper header files
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 00/34] make iio inkern interface firmware agnostic
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 11/34] iio: common: cros_ec_lid_angle: explicitly add proper header files
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 06/34] iio: adc: ingenic-adc: explicitly add proper header files
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 02/34] iio: adc: ad7606_par: explicitly add proper header files
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 03/34] iio: adc: berlin2-adc: explicitly add proper header files
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 18/34] iio: trigger: stm32-lptimer-trigger: explicitly add proper header files
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 04/34] iio: adc: imx7d_adc: explicitly add proper header files
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 14/34] iio: dac: vf610_dac: explicitly add proper header files
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 10/34] iio: adc: rzg2l_adc: explicitly add proper header files
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 08/34] iio: adc: mt6360-adc: explicitly add proper header files
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 12/34] iio: common: cros_ec_sensors: explicitly add proper header files
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 07/34] iio: adc: mp2629_adc: explicitly add proper header files
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 15/34] iio: humidity: hts221_buffer: explicitly add proper header files
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 05/34] iio: adc: imx8qxp-adc: explicitly add proper header files
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 13/34] iio: dac: stm32-dac: explicitly add proper header files
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH 16/34] iio: light: cros_ec_light_prox: explicitly add proper header files
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH] iio:light:tsl2563: avoid flush_scheduled_work() usage
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] iio:proximity:sx9360: Fix hardware gain read/write
  • From: Xiaohui Zhang <xiaohuizhang@xxxxxxxxxx>
• Re: [PATCH v2 17/17] power: axp20x_battery: Add support for AXP192
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v2 16/17] power: axp20x_battery: Support battery status without fuel gauge
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v2 15/17] power: axp20x_battery: Add constant charge current table
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: iio: adc: add AD4130
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 13/17] power: supply: axp20x_usb_power: Add support for AXP192
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH v2 07/17] dt-bindings: power: axp20x-battery: Add AXP192 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 06/17] dt-bindings: gpio: Add AXP192 GPIO bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [PATCH v2 03/17] dt-bindings: mfd: add bindings for AXP192 MFD device
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH v2 10/17] iio: adc: axp20x_adc: Minor code cleanups
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH v2 11/17] iio: adc: axp20x_adc: Consolidate ADC raw read functions
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH v2 01/17] regmap-irq: Use sub_irq_reg() to calculate unmask register address
  • From: Guru Das Srinagesh <quic_gurus@xxxxxxxxxxx>
• Re: [PATCH AUTOSEL 5.18 03/68] iio: st_sensors: Add a local lock for protecting odr
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32: fix maximum clock rate for stm32mp15x
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32: fix vrefint wrong calibration value handling
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH] iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)
  • From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
• [PATCH] iio: adc: stm32: fix vrefint wrong calibration value handling
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• [PATCH] iio: adc: stm32: fix maximum clock rate for stm32mp15x
  • From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH 3/7] iio: magnetometer: yas530: Correct temperature handling
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 5/7] iio: magnetometer: yas530: Change data type of calibration coefficients
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/7] iio: magnetometer: yas530: Correct scaling of magnetic axes
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 6/7] iio: magnetometer: yas530: Remove redundant defaults on switch devid
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 4/7] iio: magnetometer: yas530: Change data type of hard_offsets to signed
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 7/7] iio: magnetometer: yas530: Add YAS537 variant
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/7] iio: magnetometer: yas530: Change range of data in volatile register
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 07/16] iio: adc: at91-sama5d2_adc: simplify the code in at91_adc_read_info_raw()
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 05/16] iio: adc: at91-sama5d2_adc: adjust osr based on specific platform data
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 14/16] iio: adc: at91-sama5d2_adc: add empty line after functions
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 03/16] iio: adc: at91-sama5d2_adc: exit from write_raw() when buffers are enabled
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 09/16] iio: adc: at91-sama5d2_adc: update trackx on emr
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 15/16] iio: adc: at91-sama5d2_adc: add runtime pm support
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 08/16] iio: adc: at91-sama5d2_adc: move oversampling storage in its function
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 11/16] iio: adc: at91-sama5d2_adc: add locking parameter to at91_adc_read_info_raw()
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 06/16] iio: adc: at91-sama5d2_adc: add 64 and 256 oversampling ratio
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 13/16] iio: adc: at91-sama5d2_adc: add support for temperature sensor
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 16/16] iio: adc: at91-sama5d2_adc: use pm_ptr()
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 10/16] iio: adc: at91-sama5d2_adc: add startup and tracktim as parameter for at91_adc_setup_samp_freq()
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 04/16] iio: adc: at91-sama5d2_adc: handle different EMR.OSR for different hw versions
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 12/16] dt-bindings: iio: adc: at91-sama5d2_adc: add id for temperature channel
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 01/16] iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 00/16] iio: adc: at91-sama5d2_adc: add support for temperature sensor
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• [PATCH 02/16] iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• Re: [PATCH 11/17] dt-bindings: phy: mediatek,dsi-phy: Add MT8365 SoC bindings
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 05/17] dt-bindings: dma: mediatek,uart-dma: add MT8365 bindings
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: light: Add support for ltrf216a sensor
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 2/2] iio: light: Add support for ltrf216a sensor
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/1] iio:proximity:sx9360: Fix hardware gain read/write
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/1] iio:proximity:sx9360: Fix hardware gain read/write
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 7/7] iio: magnetometer: yas530: Add YAS537 variant
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH 6/7] iio: magnetometer: yas530: Remove redundant defaults on switch devid
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH 5/7] iio: magnetometer: yas530: Change data type of calibration coefficients
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH 4/7] iio: magnetometer: yas530: Change data type of hard_offsets to signed
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH 3/7] iio: magnetometer: yas530: Correct temperature handling
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH 2/7] iio: magnetometer: yas530: Correct scaling of magnetic axes
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH 1/7] iio: magnetometer: yas530: Change range of data in volatile register
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH 0/7] Add support for magnetometer Yamaha YAS537
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• Re: [PATCH v2 02/17] regmap-irq: Add get_irq_reg to support unusual register layouts
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: light: Add support for ltrf216a sensor
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: Document ltrf216a light sensor bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 11/17] iio: adc: axp20x_adc: Consolidate ADC raw read functions
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 12/17] iio: adc: axp20x_adc: Add support for AXP192
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 10/17] iio: adc: axp20x_adc: Minor code cleanups
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 11/17] iio: adc: axp20x_adc: Consolidate ADC raw read functions
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v5 2/2] iio: light: Add support for ltrf216a sensor
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: Document ltrf216a light sensor bindings
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• [PATCH v5 0/2] Add LTRF216A Driver
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• Re: [PATCH v2 05/17] dt-bindings: power: supply: axp20x: Add AXP192 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 03/17] dt-bindings: mfd: add bindings for AXP192 MFD device
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 04/17] dt-bindings: iio: adc: axp209: Add AXP192 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/5] proximity: vl53l0x: Handle the VDD regulator
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH AUTOSEL 5.18 03/68] iio: st_sensors: Add a local lock for protecting odr
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: iio: adc: add AD4130
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v4 2/2] iio: adc: ad4130: add AD4130 driver
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH v4 0/2] AD4130
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: adc: add AD4130
  • From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
• [PATCH 1/1] iio:proximity:sx9360: Fix hardware gain read/write
  • From: Xiaohui Zhang <xiaohuizhang@xxxxxxxxxx>
• Re: [RFC 2/2] iio: accel: bma400: Add support for single and double tap events
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v3] iio: trigger: warn about non-registered iio trigger getting attempt
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH AUTOSEL 5.4 01/34] iio: dummy: iio_simple_dummy: check the return value of kstrdup()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 03/38] iio: st_sensors: Add a local lock for protecting odr
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 01/19] iio: dummy: iio_simple_dummy: check the return value of kstrdup()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 01/27] iio: dummy: iio_simple_dummy: check the return value of kstrdup()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 01/25] iio: dummy: iio_simple_dummy: check the return value of kstrdup()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 02/34] iio: st_sensors: Add a local lock for protecting odr
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 01/38] iio: dummy: iio_simple_dummy: check the return value of kstrdup()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.18 03/68] iio: st_sensors: Add a local lock for protecting odr
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 03/60] iio: st_sensors: Add a local lock for protecting odr
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 01/51] iio: dummy: iio_simple_dummy: check the return value of kstrdup()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 03/51] iio: st_sensors: Add a local lock for protecting odr
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.18 01/68] iio: dummy: iio_simple_dummy: check the return value of kstrdup()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 01/60] iio: dummy: iio_simple_dummy: check the return value of kstrdup()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v2] iio: trigger: warn about non-registered iio trigger getting attempt
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v2 16/17] power: axp20x_battery: Support battery status without fuel gauge
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v2 13/17] power: supply: axp20x_usb_power: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v2 15/17] power: axp20x_battery: Add constant charge current table
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v2 11/17] iio: adc: axp20x_adc: Consolidate ADC raw read functions
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v2 17/17] power: axp20x_battery: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v2 12/17] iio: adc: axp20x_adc: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v2 14/17] pinctrl: Add AXP192 pin control driver
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v2 10/17] iio: adc: axp20x_adc: Minor code cleanups
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v2 09/17] regulator: axp20x: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v2 08/17] mfd: axp20x: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v2 06/17] dt-bindings: gpio: Add AXP192 GPIO bindings
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v2 07/17] dt-bindings: power: axp20x-battery: Add AXP192 compatible
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v2 01/17] regmap-irq: Use sub_irq_reg() to calculate unmask register address
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v2 05/17] dt-bindings: power: supply: axp20x: Add AXP192 compatible
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v2 04/17] dt-bindings: iio: adc: axp209: Add AXP192 compatible
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v2 03/17] dt-bindings: mfd: add bindings for AXP192 MFD device
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v2 02/17] regmap-irq: Add get_irq_reg to support unusual register layouts
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH v2 00/17] Add support for AXP192 PMIC
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH 05/10] dt-bindings: gpio: Add AXP192 GPIO bindings
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH 05/10] dt-bindings: gpio: Add AXP192 GPIO bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 08/10] iio: adc: axp20x_adc: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH 01/10] regmap-irq: Add get_irq_reg to support unusual register layouts
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: (subset) [PATCH 00/17] Add support for MT8365 EVK board
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 05/10] dt-bindings: gpio: Add AXP192 GPIO bindings
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [RESEND 14/14] video: backlight: mt6370: Add Mediatek MT6370 support
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH 01/10] regmap-irq: Add get_irq_reg to support unusual register layouts
  • From: Guru Das Srinagesh <quic_gurus@xxxxxxxxxxx>
• Re: [RFC PATCH v1] iio: trigger: move trig->owner init to trigger allocate() stage
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC 2/2] iio: accel: bma400: Add support for single and double tap events
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 07/10] regulator: axp20x: Add support for AXP192
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RESEND 12/14] leds: mt6370: Add Mediatek MT6370 Indicator support
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 0/2] iio: Implement and utilize register structures for
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH 2/2] iio: dac: cio-dac: Implement and utilize register structures
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• [PATCH 1/2] iio: adc: stx104: Implement and utilize register structures
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v2] iio: trigger: warn about non-registered iio trigger getting attempt
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] counter: 104-quad-8: Implement and utilize register structures
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [RFC PATCH v1] iio: trigger: move trig->owner init to trigger allocate() stage
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• [PATCH v2] iio: trigger: warn about non-registered iio trigger getting attempt
  • From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 6/6] iio: adc: meson_saradc: Use regmap_read_poll_timeout() for busy wait
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH 5/5] iio: imu: lsm6dsx: Move exported symbols to the IIO_LSM6DSX namespace
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [RESEND PATCH 4/5] iio: imu: lsm6dsx: Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS()
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [RESEND PATCH 3/5] iio: humidity: hts221: Move symbol exports into IIO_HTS221 namespace
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [RESEND PATCH 2/5] iio: humidity: hts221: Use EXPORT_SIMPLE_DEV_PM_OPS() to allow compiler to remove dead code.
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: adc: sc27xx_adc: Re-use generic struct u32_fract
  • From: Cixi Geng <gengcixi@xxxxxxxxx>
• RE: [PATCH] iio: accel: mma8452: remove the reset operation during driver probe
  • From: Bough Chen <haibo.chen@xxxxxxx>
• Re: [PATCH 05/10] dt-bindings: gpio: Add AXP192 GPIO bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 04/10] dt-bindings: power: supply: axp20x: Add AXP192 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 03/10] dt-bindings: iio: adc: axp209: Add AXP192 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 02/10] dt-bindings: mfd: add bindings for AXP192 MFD device
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 3/6] iio: adc: meson_saradc: Convert to use dev_err_probe()
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 6/6] iio: adc: meson_saradc: Use regmap_read_poll_timeout() for busy wait
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 5/6] iio: adc: meson_saradc: Use temporary variable for struct device
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/6] iio: adc: meson_saradc: Align messages to be with physical device prefix
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/6] iio: adc: meson_saradc: Don't attach managed resource to IIO device object
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH 09/10] power: supply: axp20x_usb_power: Add support for AXP192
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [RFC 2/2] iio: accel: bma400: Add support for single and double tap events
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH] iio: adc: ad_sigma_delta: IRQ sharing mechanism.
  • From: Daniel Beer <daniel.beer@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: at91-sama5d2: Limit requested watermark value to hwfifo size
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 01/92] iio: core: Fix IIO_ALIGN and rename as it was not sufficiently large
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 00/92] IIO: Fix alignment of buffers for DMA
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: sx9324: Support CS idle mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v14 01/10] spmi: add a helper to look up an SPMI device from a device node
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 10/10] iio: sx9360: Add pre-charge resistor setting
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 09/10] dt-bindings: iio: sx9360: Add precharge resistor setting
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 08/10] iio: sx9324: Add Setting for internal analog gain
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 07/10] dt-bindings: iio: sx9324: Add input analog gain
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 05/10] dt-bindings: iio: sx9324: Add internal compensation resistor setting
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 04/10] iio: sx9324: Add precharge internal resistance setting
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 03/10] dt-bindings: iio: sx9324: Add precharge resistor setting
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 02/10] iio: sx9324: Fix register field spelling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: mma8452: remove the reset operation during driver probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RESEND PATCH 5/5] iio: imu: lsm6dsx: Move exported symbols to the IIO_LSM6DSX namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RESEND PATCH 4/5] iio: imu: lsm6dsx: Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RESEND PATCH 3/5] iio: humidity: hts221: Move symbol exports into IIO_HTS221 namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RESEND PATCH 2/5] iio: humidity: hts221: Use EXPORT_SIMPLE_DEV_PM_OPS() to allow compiler to remove dead code.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RESEND PATCH 1/5] iio:accel:kxsd9: Switch from CONFIG_PM guards to pm_ptr() etc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RESEND PATCH 0/5] IIO: Where dev_pm_ops rework and namespaces meet (4-8)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] iio: gyro: mpu3050: Cleanup exports and PM
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 4/4] iio: adc: qcom-vadc: Move symbol exports to IIO_QCOM_VADC namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 3/4] iio: chemical: sps30: Move symbol exports into IIO_SPS30 namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 1/4] iio: imu: bmi160: Move exported symbols to IIO_BMI160 namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 2/4] iio: pressure: bmp280: Move symbol exports to IIO_BMP280 namespace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 0/4] 3rd set of IIO export namespaces.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/5] iio: adc: adi-axi: Move exported symbols into IIO_ADI_AXI namespace.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 04/49] iio: fix opencoded for_each_set_bit()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: core: drop iio_get_time_res()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: addac: ad74413r: for_each_set_bit_from -> for_each_set_bit
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad_sigma_delta: IRQ sharing mechanism.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: at91-sama5d2: Limit requested watermark value to hwfifo size
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: sca3000: Fix syntax errors in comments
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC 2/2] iio: accel: bma400: Add support for single and double tap events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC 1/2] iio: Add new event type gesture and use direction for single and double tap
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/10] iio: adc: axp20x_adc: Add support for AXP192
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: Use octal permissions and DEVICE_ATTR_{RO,RW}.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH v1] iio: trigger: move trig->owner init to trigger allocate() stage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 1/6] iio: inkern: fix return value in devm_of_iio_channel_get_by_name()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/10] iio: adc: axp20x_adc: Add support for AXP192
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• Re: [PATCH 03/10] dt-bindings: iio: adc: axp209: Add AXP192 compatible
  • From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
• [PATCH] iio: accel: sca3000: Fix syntax errors in comments
  • From: Xiang wangx <wangxiang@xxxxxxxxxx>
• Re: [PATCH V9 0/5] iio: accel: sca3300: add compatible for scl3300
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: adc: nau7802: Convert driver to use ->probe_new()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: adc: vf610_adc: Make use of device properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>