The datasheet states that the slave address for the device is 0x20
when the pins A0 and A1 are ground. The DT binding has been using
0x10 as the value and I think it should be 0x20 as per datasheet.
Let me know if I am wrong about this.
Signed-off-by: Rajat Khandelwal <rajat.khandelwal@xxxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml b/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml
index 264fa7c5fe3a..1955b1a97cd6 100644
--- a/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml
@@ -38,7 +38,7 @@ examples:
dac@10 {
compatible = "maxim,ds4424";
- reg = <0x10>; /* When A0, A1 pins are ground */
+ reg = <0x20>; /* When A0, A1 pins are ground */
vcc-supply = <&vcc_3v3>;
};
};
--
2.34.1
