Il 11/10/22 06:05, ChiaEn Wu ha scritto:
From: Alice Chen <alice_chen@xxxxxxxxxxx>
The MediaTek MT6370 is a highly-integrated smart power management IC,
which includes a single cell Li-Ion/Li-Polymer switching battery
charger, a USB Type-C & Power Delivery (PD) controller, dual Flash
LED current sources, a RGB LED driver, a backlight WLED driver,
a display bias driver and a general LDO for portable devices.
Add support for the MT6370 Flash LED driver. Flash LED in MT6370
has 2 channels and support torch/strobe mode.
Signed-off-by: Alice Chen <alice_chen@xxxxxxxxxxx>
Signed-off-by: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>
---
v14
- Remove unused 'depend on OF' in Kconfig
---
drivers/leds/flash/Kconfig | 14 +
drivers/leds/flash/Makefile | 1 +
drivers/leds/flash/leds-mt6370-flash.c | 631 +++++++++++++++++++++++++++++++++
3 files changed, 646 insertions(+)
create mode 100644 drivers/leds/flash/leds-mt6370-flash.c
diff --git a/drivers/leds/flash/Kconfig b/drivers/leds/flash/Kconfig
index d3eb689..0dd955c 100644
--- a/drivers/leds/flash/Kconfig
+++ b/drivers/leds/flash/Kconfig
@@ -61,6 +61,20 @@ config LEDS_MT6360
Independent current sources supply for each flash LED support torch
and strobe mode.
+config LEDS_MT6370_FLASH
+ tristate "Flash LED Support for MediaTek MT6370 PMIC"
+ depends on LEDS_CLASS
+ depends on LEDS_CLASS_FLASH || !LEDS_CLASS_FLASH
This dependency makes no sense, as the options in the Kconfig you're putting
this into gets parsed only `if LEDS_CLASS_FLASH`.
Please remove that.
+ depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
Well, if it depends on that being either y, m or n, it means that it does
not depend on that at all. Remove.
After which,
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
+ depends on MFD_MT6370
+ help
+ Support 2 channels and torch/strobe mode.
+ Say Y here to enable support for
+ MT6370_FLASH_LED device.
+
+ This driver can also be built as a module. If so, the module
+ will be called "leds-mt6370-flash".
+
config LEDS_RT4505
tristate "LED support for RT4505 flashlight controller"
depends on I2C && OF
