From: Cosmin Tanislav <cosmin.tanislav@xxxxxxxxxx> Currently, every time the device wakes up from sleep, the iio_chan array is reallocated, leaking the previous one until the device is removed (basically never). Move the allocation to the probe function to avoid this. Signed-off-by: Cosmin Tanislav <cosmin.tanislav@xxxxxxxxxx> --- drivers/iio/temperature/ltc2983.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/iio/temperature/ltc2983.c b/drivers/iio/temperature/ltc2983.c index b652d2b39bcf..a60ccf183687 100644 --- a/drivers/iio/temperature/ltc2983.c +++ b/drivers/iio/temperature/ltc2983.c @@ -1385,13 +1385,6 @@ static int ltc2983_setup(struct ltc2983_data *st, bool assign_iio) return ret; } - st->iio_chan = devm_kzalloc(&st->spi->dev, - st->iio_channels * sizeof(*st->iio_chan), - GFP_KERNEL); - - if (!st->iio_chan) - return -ENOMEM; - ret = regmap_update_bits(st->regmap, LTC2983_GLOBAL_CONFIG_REG, LTC2983_NOTCH_FREQ_MASK, LTC2983_NOTCH_FREQ(st->filter_notch_freq)); @@ -1514,6 +1507,12 @@ static int ltc2983_probe(struct spi_device *spi) gpiod_set_value_cansleep(gpio, 0); } + st->iio_chan = devm_kzalloc(&spi->dev, + st->iio_channels * sizeof(*st->iio_chan), + GFP_KERNEL); + if (!st->iio_chan) + return -ENOMEM; + ret = ltc2983_setup(st, true); if (ret) return ret; -- 2.37.3
