Re: [PATCH v1 1/2] dt-bindings:iio:adc: add documentation for TI LMP92064 controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04/10/2022 15:42, Leonard Göhrs wrote:
> Add binding documentation for the TI LMP92064 dual channel SPI ADC.

Subject: missing spaces after ':'. Also drop "documentation" - kind of
redundant.


> 
> Signed-off-by: Leonard Göhrs <l.goehrs@xxxxxxxxxxxxxx>
> ---
>  .../bindings/iio/adc/ti,lmp92064.yaml         | 60 +++++++++++++++++++
>  1 file changed, 60 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,lmp92064.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/ti,lmp92064.yaml b/Documentation/devicetree/bindings/iio/adc/ti,lmp92064.yaml
> new file mode 100644
> index 0000000000000..b7b5761baa108
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/ti,lmp92064.yaml
> @@ -0,0 +1,60 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/ti,lmp92064.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments LMP92064 Precision Current and Voltage Sensor.
> +
> +maintainers:
> +  - Leonard Göhrs <l.goehrs@xxxxxxxxxxxxxx>
> +
> +description: |
> +  The LMP92064 is a two channel ADC intended for combined voltage and current
> +  measurements.
> +
> +  The device contains two ADCs to allow simultaneous sampling of voltage and
> +  current and thus of instantanious power consumption.

Not sure if my spell-check misses a word or you meant "instantaneous"?

> +

Missing allOf:$ref to spi-peripheral-props.yaml

> +properties:
> +  compatible:
> +    enum:
> +      - ti,lmp92064
> +
> +  reg:
> +    maxItems: 1
> +
> +  spi-max-frequency: true
> +
> +  shunt-resistor:

This is not a valid property name.
git grep shunt-resistor


> +    description: |
> +      Value of the shunt resistor (in µΩ) connected between INCP and INCN,
> +      across which current is measured. Used to provide correct scaling of the
> +      raw adc measurement.

s/adc/ADC/

> +
> +  reset-gpios:
> +    maxItems: 1
> +

Best regards,
Krzysztof




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux