Linux IIO Development
[Prev Page][Next Page]
- [PATCH v5 0/3] adc-joystick: Add polled support
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- Re: [PATCH v15 06/10] iio: test: add basic tests for the iio-rescale driver
- From: Liam Beguin <liambeguin@xxxxxxxxx>
- [PATCH v2 01/19] iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH v2 14/19] iio: adc: at91-sama5d2_adc: add startup and tracktim as parameter for at91_adc_setup_samp_freq()
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH v2 11/19] iio: adc: at91-sama5d2_adc: add 64 and 256 oversampling ratio
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH v2 06/19] iio: adc: at91-sama5d2_adc: handle different EMR.OSR for different hw versions
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH v2 05/19] iio: adc: at91-sama5d2_adc: exit from write_raw() when buffers are enabled
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH v2 02/19] iio: adc: at91-sama5d2_adc: check return status for pressure and touch
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH v2 17/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH v2 03/19] iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH v2 09/19] iio: adc: at91-sama5d2_adc: add .read_avail() chan_info ops
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH v2 00/19] iio: adc: at91-sama5d2_adc: add support for temperature sensor
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH v2 19/19] iio: adc: at91-sama5d2_adc: add runtime pm support
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH v2 07/19] iio: adc: at91-sama5d2_adc: move the check of oversampling in its function
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH v2 13/19] iio: adc: at91-sama5d2_adc: update trackx on emr
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH v2 15/19] iio: adc: at91-sama5d2_adc: lock around at91_adc_read_info_raw()
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH v2 18/19] iio: adc: at91-sama5d2_adc: add empty line after functions
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH v2 12/19] iio: adc: at91-sama5d2_adc: move oversampling storage in its function
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH v2 04/19] iio: adc: at91-sama5d2_adc: disable/prepare buffer on suspend/resume
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH v2 10/19] iio: adc: at91-sama5d2_adc: adjust osr based on specific platform data
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH v2 08/19] iio: adc: at91-sama5d2_adc: drop AT91_OSR_XSAMPLES defines
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH v2 16/19] dt-bindings: iio: adc: at91-sama5d2_adc: add id for temperature channel
- From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
- [PATCH v7 2/2] iio: adc: ad4130: add AD4130 driver
- From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
- [PATCH v7 1/2] dt-bindings: iio: adc: add AD4130
- From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
- [PATCH v7 0/2] AD4130
- From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
- Re: [PATCH v5 1/2] dt-bindings: iio: adc: add AD4130
- From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
- Re: [PATCH v5 1/2] dt-bindings: iio: adc: add AD4130
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] iio/hid: Add mount_matrix
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: Dynamically configured channels, overlap with GPIO, encoder support
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH] iio/hid: Add mount_matrix
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v6 2/2] iio: adc: ad4130: add AD4130 driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 00/17] staging/iio: Clean up AD7746 CDC driver and move from staging.
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 15/17] iio: cdc: ad7746: Add device specific ABI documentation.
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 11/17] iio: core: Introduce _zeropoint for differential channels
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 08/17] staging: iio: cdc: ad7746: Break up use of chan->address and use FIELD_PREP etc
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 02/10] iio: adc: mcp3911: use resource-managed version of iio_device_register
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 06/10] iio: adc: mcp3911: add support for oversampling ratio
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 09/14] regulator: mt6370: Add mt6370 DisplayBias and VibLDO support
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 07/14] mfd: mt6370: Add Mediatek MT6370 support
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: Add rtq6056 support
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Dynamically configured channels, overlap with GPIO, encoder support
- From: Giedrius Trainavičius <giedrius@xxxxxxxxx>
- Re: [PATCH] iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
- From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
- [PATCH v6 2/2] iio: adc: ad4130: add AD4130 driver
- From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
- [PATCH v6 1/2] dt-bindings: iio: adc: add AD4130
- From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
- [PATCH v6 0/2] AD4130
- From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
- Re: [PATCH 1/4] iio: ABI: temperature: Unify documentation for thermocouple fault detection.
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
- Re: [PATCH 3/4] iio: ABI: stm32-timer-trigger: Fuse unusual ABI into main doc.
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
- [PATCH AUTOSEL 5.18 28/53] iio: freq: admv1014: Fix warning about dubious x & !y and improve readability
- From: Sasha Levin <sashal@xxxxxxxxxx>
- Re: [PATCH 00/36] IIO: switch easy cases to new simpler PM related macros.
- From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/3] dt-bindings: adc-joystick: add poll-interval
- From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
- Re: [PATCH v4 2/3] Input: adc-joystick - Add polled input device support
- From: Artur Rojek <contact@xxxxxxxxxxxxxx>
- Re: [PATCH v4 1/3] dt-bindings: adc-joystick: add poll-interval
- From: Chris Morgan <macromorgan@xxxxxxxxxxx>
- Re: [PATCH v4 1/3] dt-bindings: adc-joystick: add poll-interval
- From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: staging: iio: imu: Document CEVA BNO08x
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v4 1/3] dt-bindings: adc-joystick: add poll-interval
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- [PATCH v4 0/3] adc-joystick: Add polled support
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- [PATCH v4 3/3] arm64: dts: rockchip: Update joystick to polled for Odroid-Go2
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- [PATCH v4 2/3] Input: adc-joystick - Add polled input device support
- From: Chris Morgan <macroalpha82@xxxxxxxxx>
- Re: [PATCH] iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [PATCH] iio/hid: Add mount_matrix
- From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
- Re: [PATCH] iio/hid: Add mount_matrix
- From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
- [PATCH] iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
- From: Jean-Baptiste Maneyrol <jmaneyrol@xxxxxxxxxxxxxx>
- Re: [PATCH v2 08/15] mfd: mt6370: Add Mediatek MT6370 support
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 3/3] iio: pressure: bmp280: Adds more tunable config parameters for BMP380
- From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
- Re: [PATCH 2/3] iio: pressure: bmp280: Add support for BMP380 sensor family
- From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
- Re: [PATCH v2] iio: cros: Register FIFO callback after sensor is registered
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH v2 08/15] mfd: mt6370: Add Mediatek MT6370 support
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- Re: [PATCH 2/3] iio: pressure: bmp280: Add support for BMP380 sensor family
- From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
- Re: [PATCH 2/6] dt-bindings: mfd: Add mp2733 compatible
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH v3 2/6] dt-bindings: mfd: Add mp2733 compatible
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 1/4] iio: ABI: temperature: Unify documentation for thermocouple fault detection.
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v2 08/15] mfd: mt6370: Add Mediatek MT6370 support
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 3/4] iio: ABI: stm32-timer-trigger: Fuse unusual ABI into main doc.
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH 2/6] dt-bindings: mfd: Add mp2733 compatible
- From: Rob Herring <robh+dt@xxxxxxxxxx>
- Re: [PATCH v3 13/16] pinctrl: Add AXP192 pin control driver
- From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
- Re: [PATCH 06/10] mfd: axp20x: Add support for AXP192
- From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
- Re: [PATCH v3 3/6] mfd: mp2629: Add support for mps mp2733 battery charger
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 06/10] mfd: axp20x: Add support for AXP192
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 02/10] dt-bindings: mfd: add bindings for AXP192 MFD device
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH] iio/hid: Add mount_matrix
- From: Bastien Nocera <hadess@xxxxxxxxxx>
- Re: [PATCH] iio/hid: Add mount_matrix
- From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
- Re: [PATCH v3 13/16] pinctrl: Add AXP192 pin control driver
- From: Michael Walle <michael@xxxxxxxx>
- Re: [PATCH 2/3] iio: pressure: bmp280: Add support for BMP380 sensor family
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH v15 06/10] iio: test: add basic tests for the iio-rescale driver
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH 4/4] iio: ABI: sx9324: Squash some formatting to keep scripting happy.
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
- Re: [PATCH 3/4] iio: ABI: stm32-timer-trigger: Fuse unusual ABI into main doc.
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
- Re: [PATCH 2/4] iio: ABI: max31865: Drop in_filter_notch_centre_frequency as in main docs.
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
- Re: [PATCH 1/4] iio: ABI: temperature: Unify documentation for thermocouple fault detection.
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
- Re: [PATCH 05/36] iio: adc: meson_saradc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
- Re: [PATCH 34/36] iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
- From: Rishi Gupta <gupt21@xxxxxxxxx>
- [PATCH 4/4] iio: ABI: sx9324: Squash some formatting to keep scripting happy.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 2/4] iio: ABI: max31865: Drop in_filter_notch_centre_frequency as in main docs.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 1/4] iio: ABI: temperature: Unify documentation for thermocouple fault detection.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 3/4] iio: ABI: stm32-timer-trigger: Fuse unusual ABI into main doc.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 0/4] IIO: Some documentation error and warning fixes.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH] iio: adc: ti-ads124s08: Drop unused parameter to ads124s_read()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH V9 5/5] iio: accel: sca3300: Add inclination channels
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio/hid: Add mount_matrix
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 3/3] iio: pressure: bmp280: Adds more tunable config parameters for BMP380
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 2/2] iio: accel: bma400: Add support for single and double tap events
- From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
- Re: [PATCH v1 1/2] iio: Add new event type gesture and use direction for single and double tap
- From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
- [PATCH v3 17/17] RFC: iio: cdc: ad7746: Add roadtest
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v3 16/17] iio: cdc: ad7746: Move driver out of staging.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v3 15/17] iio: cdc: ad7746: Add device specific ABI documentation.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v3 14/17] staging: iio: ad7746: White space cleanup
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v3 13/17] staging: iio: cdc: ad7746: Use read_avail() rather than opencoding.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v3 12/17] staging: iio: cdc: ad7746: Switch from _offset to _zeropoint for differential channels.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v3 11/17] iio: core: Introduce _zeropoint for differential channels
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v3 09/17] staging: iio: cdc: ad7746: Drop unused i2c_set_clientdata()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v3 10/17] staging: iio: cdc: ad7746: Use _raw and _scale for temperature channels.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v3 08/17] staging: iio: cdc: ad7746: Break up use of chan->address and use FIELD_PREP etc
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v3 07/17] staging: iio: cdc: ad7764: Push locking down into case statements in read/write_raw
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v3 03/17] staging: iio: cdc: ad7746: Use explicit be24 handling.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v3 01/17] iio: core: Increase precision of IIO_VAL_FRACTIONAL_LOG2 when possible
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v3 04/17] staging: iio: cdc: ad7746: Push handling of supply voltage scale to userspace.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v3 02/17] iio: ABI: Fix wrong format of differential capacitance channel ABI.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v3 06/17] staging: iio: cdc: ad7746: Factor out ad7746_read_channel()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v3 05/17] staging: iio: cdc: ad7746: Use local buffer for multi byte reads.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v3 00/17] staging/iio: Clean up AD7746 CDC driver and move from staging.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 00/17] staging/iio: Clean up AD7746 CDC driver and move from staging.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 6/8] iio: magnetometer: yas530: Rename functions and registers
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- [PATCH] HID: hid-sensor-hub: Remove unused macros
- From: Akihiko Odaki <akihiko.odaki@xxxxxxxxx>
- Re: [PATCH v3 5/8] iio: magnetometer: yas530: Change data type of calibration coefficients
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- Re: [PATCH 2/3] iio: pressure: bmp280: Add support for BMP380 sensor family
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH v2] iio: cros: Register FIFO callback after sensor is registered
- From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
- Re: [PATCH] iio: cros: Add cros_ec_sensors_core_register
- From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
- Re: [PATCH] iio/hid: Add mount_matrix
- From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
- Re: [PATCH 2/3] iio: pressure: bmp280: Add support for BMP380 sensor family
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 2/3] iio: pressure: bmp280: Add support for BMP380 sensor family
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 05/10] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: iio: pressure: bmp085: Add BMP380 compatible string
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH] iio/hid: Add mount_matrix
- From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/3] iio: pressure: bmp280: Add support for BMP380 sensor family
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 2/3] iio: pressure: bmp280: Add support for BMP380 sensor family
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 2/3] iio: pressure: bmp280: Add support for BMP380 sensor family
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 3/3] iio: pressure: bmp280: Adds more tunable config parameters for BMP380
- From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
- [PATCH 2/3] iio: pressure: bmp280: Add support for BMP380 sensor family
- From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
- [PATCH 1/3] dt-bindings: iio: pressure: bmp085: Add BMP380 compatible string
- From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
- Re: [PATCH v3 2/3] Input: adc-joystick - Add polled input device support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 8/8] iio: magnetometer: yas530: Add YAS537 variant
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 6/8] iio: magnetometer: yas530: Rename functions and registers
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 4/8] iio: magnetometer: yas530: Correct temperature handling
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5 2/2] iio: adc: ad4130: add AD4130 driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 0/2] iio: adc: stm32-adc: add checks on adc state
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: dac: ad5380: aligned '*' each line and drop unneeded blank line
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH][next] iio: adc: qcom-spmi-rradc: Fix spelling mistake "coherrency" -> "coherency"
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: Questions: IIO type for absorbance and float values in channels?
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 11/36] iio: dac: ds4424: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 14/36] iio: dac: max5821: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 20/36] iio: light: al3320a: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio/hid: Add mount_matrix
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v2 10/10] iio: adc: mcp3911: add support to set PGA
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio/hid: Add mount_matrix
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v2 09/10] iio: adc: mcp3911: make use of the sign bit
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 08/10] iio: adc: mcp3911: add support for phase
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio/hid: Add mount_matrix
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v2 10/10] iio: adc: mcp3911: add support to set PGA
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 07/10] iio: adc: mcp3911: use correct formula for AD conversion
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 06/10] iio: adc: mcp3911: add support for oversampling ratio
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 04/10] iio: adc: mcp3911: add support for interrupts
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 04/10] iio: adc: mcp3911: add support for interrupts
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 03/10] iio: adc: mcp3911: add support for buffers
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 08/10] iio: adc: mcp3911: add support for phase
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 01/10] iio: adc: mcp3911: correct "microchip,device-addr" property
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 02/10] iio: adc: mcp3911: use resource-managed version of iio_device_register
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 01/10] iio: adc: mcp3911: correct "microchip,device-addr" property
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 02/10] iio: adc: mcp3911: use resource-managed version of iio_device_register
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] iio: dac: mcp4922: add support to mcp4921
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: Don't use bare "unsigned"
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio/hid: Add mount_matrix
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v2 08/10] iio: adc: mcp3911: add support for phase
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- [PATCH v2 06/10] iio: adc: mcp3911: add support for oversampling ratio
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- [PATCH v2 09/10] iio: adc: mcp3911: make use of the sign bit
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- [PATCH v2 05/10] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- [PATCH v2 10/10] iio: adc: mcp3911: add support to set PGA
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- [PATCH v2 07/10] iio: adc: mcp3911: use correct formula for AD conversion
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- [PATCH v2 04/10] iio: adc: mcp3911: add support for interrupts
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- [PATCH v2 03/10] iio: adc: mcp3911: add support for buffers
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- [PATCH v2 01/10] iio: adc: mcp3911: correct "microchip,device-addr" property
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- [PATCH v2 02/10] iio: adc: mcp3911: use resource-managed version of iio_device_register
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- Re: [PATCH v3 02/14] dt-bindings: power: supply: Add Mediatek MT6370 Charger
- From: Miles Chen <miles.chen@xxxxxxxxxxxx>
- [PATCH] iio/hid: Add mount_matrix
- From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
- Re: [PATCH v3 12/14] leds: mt6370: Add Mediatek MT6370 current sink type LED Indicator support
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 1/2] iio: dac: mcp4922: add support to mcp4921
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- Re: [PATCH 05/10] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 05/10] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- Re: [PATCH 06/10] iio: adc: mcp3911: add support for oversampling ratio
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- Re: [PATCH 10/10] iio: adc: mcp3911: add support to set PGA
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- Re: [PATCH 08/10] iio: adc: mcp3911: add support for phase
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- Re: [PATCH 04/10] iio: adc: mcp3911: add support for interrupts
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- Re: [PATCH v3 08/14] usb: typec: tcpci_mt6370: Add Mediatek MT6370 tcpci driver
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: iio: dac: mcp4922: expand for mcp4921 support
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 06/14] dt-bindings: mfd: Add Mediatek MT6370
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 04/14] dt-bindings: leds: Add Mediatek MT6370 flashlight
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 03/14] dt-bindings: leds: mt6370: Add Mediatek mt6370 current sink type LED indicator
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 03/14] dt-bindings: leds: mt6370: Add Mediatek mt6370 current sink type LED indicator
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 09/14] regulator: mt6370: Add mt6370 DisplayBias and VibLDO support
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- Re: [PATCH v3 02/14] dt-bindings: power: supply: Add Mediatek MT6370 Charger
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 07/14] mfd: mt6370: Add Mediatek MT6370 support
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- [PATCH 2/2] dt-bindings: iio: dac: mcp4922: expand for mcp4921 support
- From: Kory Maincent <kory.maincent@xxxxxxxxxxx>
- Re: [PATCH v3 14/14] video: backlight: mt6370: Add Mediatek MT6370 support
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- [PATCH 1/2] iio: dac: mcp4922: add support to mcp4921
- From: Kory Maincent <kory.maincent@xxxxxxxxxxx>
- Re: [PATCH 05/10] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 05/14] dt-bindings: backlight: Add Mediatek MT6370 backlight
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- Re: [PATCH v3 12/14] leds: mt6370: Add Mediatek MT6370 current sink type LED Indicator support
- From: szuni chen <szunichen@xxxxxxxxx>
- Re: [PATCH 02/10] iio: adc: mcp3911: use resource-managed version of iio_device_register
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- Re: [PATCH v3 12/14] leds: mt6370: Add Mediatek MT6370 current sink type LED Indicator support
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 12/14] leds: mt6370: Add Mediatek MT6370 current sink type LED Indicator support
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: Add rtq6056 support
- From: ChiYuan Huang <u0084500@xxxxxxxxx>
- [PATCH] iio: Don't use bare "unsigned"
- From: Joe Simmons-Talbott <joetalbott@xxxxxxxxx>
- Re: [PATCH v2 02/17] regmap-irq: Add get_irq_reg to support unusual register layouts
- From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
- Re: [PATCH v3 12/14] leds: mt6370: Add Mediatek MT6370 current sink type LED Indicator support
- From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
- Re: [PATCH 10/10] iio: adc: mcp3911: add support to set PGA
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 06/10] iio: adc: mcp3911: add support for oversampling ratio
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 04/10] iio: adc: mcp3911: add support for interrupts
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 08/10] iio: adc: mcp3911: add support for phase
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 02/10] iio: adc: mcp3911: use resource-managed version of iio_device_register
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 01/10] iio: adc: mcp3911: correct "microchip,device-addr" property
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 11/14] power: supply: mt6370: Add Mediatek MT6370 charger driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 10/14] iio: adc: mt6370: Add Mediatek MT6370 support
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 09/14] regulator: mt6370: Add mt6370 DisplayBias and VibLDO support
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 08/14] usb: typec: tcpci_mt6370: Add Mediatek MT6370 tcpci driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 07/14] mfd: mt6370: Add Mediatek MT6370 support
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v5 2/2] iio: adc: ad4130: add AD4130 driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 10/10] iio: adc: mcp3911: add support to set PGA
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- [PATCH 10/10] iio: adc: mcp3911: add support to set PGA
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- [PATCH 09/10] iio: adc: mcp3911: make use of the sign bit
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- [PATCH 08/10] iio: adc: mcp3911: add support for phase
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- [PATCH 03/10] iio: adc: mcp3911: add support for buffers
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- [PATCH 02/10] iio: adc: mcp3911: use resource-managed version of iio_device_register
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- [PATCH 04/10] iio: adc: mcp3911: add support for interrupts
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- [PATCH 05/10] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- [PATCH 01/10] iio: adc: mcp3911: correct "microchip,device-addr" property
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- [PATCH 07/10] iio: adc: mcp3911: use correct formula for AD conversion
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- [PATCH 06/10] iio: adc: mcp3911: add support for oversampling ratio
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- Re: [PATCH v5 2/2] iio: adc: ad4130: add AD4130 driver
- From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
- Re: (subset) [PATCH v3 00/14] Add Mediatek MT6370 PMIC support
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v5 2/2] iio: adc: ad4130: add AD4130 driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v5 2/2] iio: adc: ad4130: add AD4130 driver
- From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
- Re: [PATCH v3 14/14] video: backlight: mt6370: Add Mediatek MT6370 support
- From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
- Re: [PATCH v3 05/14] dt-bindings: backlight: Add Mediatek MT6370 backlight
- From: Joe Simmons-Talbott <joetalbott@xxxxxxxxx>
- Re: Intel Timed-IO driver in IIO/Counter subsystem
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v3 13/14] leds: flashlight: mt6370: Add Mediatek MT6370 flashlight support
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- [PATCH v3 12/14] leds: mt6370: Add Mediatek MT6370 current sink type LED Indicator support
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- [PATCH v3 14/14] video: backlight: mt6370: Add Mediatek MT6370 support
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- [PATCH v3 09/14] regulator: mt6370: Add mt6370 DisplayBias and VibLDO support
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- [PATCH v3 10/14] iio: adc: mt6370: Add Mediatek MT6370 support
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- [PATCH v3 08/14] usb: typec: tcpci_mt6370: Add Mediatek MT6370 tcpci driver
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- [PATCH v3 11/14] power: supply: mt6370: Add Mediatek MT6370 charger driver
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- [PATCH v3 07/14] mfd: mt6370: Add Mediatek MT6370 support
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- [PATCH v3 06/14] dt-bindings: mfd: Add Mediatek MT6370
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- [PATCH v3 04/14] dt-bindings: leds: Add Mediatek MT6370 flashlight
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- [PATCH v3 05/14] dt-bindings: backlight: Add Mediatek MT6370 backlight
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- [PATCH v3 03/14] dt-bindings: leds: mt6370: Add Mediatek mt6370 current sink type LED indicator
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- [PATCH v3 02/14] dt-bindings: power: supply: Add Mediatek MT6370 Charger
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- [PATCH v3 01/14] dt-bindings: usb: Add Mediatek MT6370 TCPC
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- [PATCH v3 00/14] Add Mediatek MT6370 PMIC support
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- Re: [PATCH v2 02/17] regmap-irq: Add get_irq_reg to support unusual register layouts
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- Re: [PATCH 21/36] iio: light: as73211: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Christian Eggers <ceggers@xxxxxxx>
- RE: [PATCH 25/36] iio: temperature: ltc2983: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
- Re: [PATCH] iio: cros: Add cros_ec_sensors_core_register
- From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
- Re: [PATCH v3] iio: trigger: warn about non-registered iio trigger getting attempt
- From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
- Re: Questions: IIO type for absorbance and float values in channels?
- From: Stefan Lengfeld <stefan.lengfeld@xxxxxxxxx>
- Re: [PATCH v8 01/16] clk: generalize devm_clk_get() a bit
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: [PATCH v2 00/17] staging/iio: Clean up AD7746 CDC driver and move from staging.
- From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
- Re: [PATCH 29/36] iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
- From: Brian Masney <masneyb@xxxxxxxxxxxxx>
- Re: [PATCH 30/36] iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
- From: Brian Masney <masneyb@xxxxxxxxxxxxx>
- Re: [PATCH v8 01/16] clk: generalize devm_clk_get() a bit
- From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
- Re: [PATCH v8 01/16] clk: generalize devm_clk_get() a bit
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 19/36] iio: light: al3010: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: David Heidelberg <david@xxxxxxx>
- RE: [PATCH 27/36] iio: adc: imx8qxp: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
- From: Bough Chen <haibo.chen@xxxxxxx>
- RE: [PATCH 04/36] iio: adc: imx7d_adc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Bough Chen <haibo.chen@xxxxxxx>
- Re: [PATCH v3 5/8] iio: magnetometer: yas530: Change data type of calibration coefficients
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2] iio: magnetometer: hmc5843: Remove duplicate 'the'
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 08/36] iio: adc: ti-am335x: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- Re: [PATCH 12/36] iio: dac: ltc1660: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
- Re: [PATCH v2] iio: magnetometer: hmc5843: Remove duplicate 'the'
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH v2] iio: magnetometer: hmc5843: Remove duplicate 'the'
- From: Jiang Jian <jiangjian@xxxxxxxxxx>
- Re: [PATCH v3 2/3] Input: adc-joystick - Add polled input device support
- From: Chris Morgan <macromorgan@xxxxxxxxxxx>
- Re: [PATCH] iio:magnetometer:hmc5843: Remove duplicate 'the' in two places.
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 24/36] iio: proximity: cros_ec_mkbp: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
- Re: [PATCH v8 01/16] clk: generalize devm_clk_get() a bit
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 32/36] iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 36/36] iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 14/36] iio: dac: max5821: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 0/4] 3rd set of IIO export namespaces.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 33/36] iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 29/36] iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 22/36] iio: light: bh1750: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 35/36] iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 15/36] iio: dac: mcp4725: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 18/36] iio: health: afe4404: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 21/36] iio: light: as73211: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 16/36] iio: gyro: itg3200: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 19/36] iio: light: al3010: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 27/36] iio: adc: imx8qxp: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 12/36] iio: dac: ltc1660: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 20/36] iio: light: al3320a: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 26/36] iio: light: us5182: Switch from CONFIG_PM guards to pm_ptr() etc
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 30/36] iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 25/36] iio: temperature: ltc2983: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 13/36] iio: dac: max517: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 23/36] iio: light: cm3605: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 28/36] iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 17/36] iio: health: afe4403: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 34/36] iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 24/36] iio: proximity: cros_ec_mkbp: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 31/36] iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 10/36] iio: chemical: scd4x: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 11/36] iio: dac: ds4424: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 09/36] iio: adc: xilinx-ams: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 08/36] iio: adc: ti-am335x: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 07/36] iio: adc: stmpe-adc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 06/36] iio: adc: mt6577_auxadc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 05/36] iio: adc: meson_saradc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 04/36] iio: adc: imx7d_adc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 03/36] iio: adc: at91-sam5d2: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 02/36] iio: adc: ad799x: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 01/36] iio: accel: bma220: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 00/36] IIO: switch easy cases to new simpler PM related macros.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v8 01/16] clk: generalize devm_clk_get() a bit
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: Questions: IIO type for absorbance and float values in channels?
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH] iio: cros: Add cros_ec_sensors_core_register
- From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
- [PATCH] iio:magnetometer:hmc5843: Remove duplicate 'the' in two places.
- From: Jiang Jian <jiangjian@xxxxxxxxxx>
- Re: [PATCH 1/2] iio: adc: stm32-adc: make safe adc disable
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: stm32-adc: disable adc before calibration
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
- Re: [PATCH v2 00/17] staging/iio: Clean up AD7746 CDC driver and move from staging.
- From: Joe Simmons-Talbott <joetalbott@xxxxxxxxx>
- Re: Questions: IIO type for absorbance and float values in channels?
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH] iio: dac: ad5380: aligned '*' each line and drop unneeded blank line
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: Intel Timed-IO driver in IIO/Counter subsystem
- From: William Breathitt Gray <william.gray@xxxxxxxxxx>
- Re: Questions: IIO type for absorbance and float values in channels?
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Questions: IIO type for absorbance and float values in channels?
- From: Stefan Lengfeld <stefan.lengfeld@xxxxxxxxx>
- Re: [PATCH v2 03/15] dt-bindings: leds: mt6370: Add Mediatek mt6370 current sink type LED indicator
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v1 1/1] iio: adc: mxs-lradc-adc: Get rid of OF specifics
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCH v1 1/1] iio: adc: mxs-lradc-adc: Get rid of OF specifics
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/1] iio: adc: mxs-lradc-adc: Get rid of OF specifics
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 1/1] iio: adc: mxs-lradc-adc: Get rid of OF specifics
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 1/1] iio: adc: mxs-lradc-adc: Get rid of OF specifics
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v1 1/1] iio: adc: mxs-lradc-adc: Get rid of OF specifics
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- [PATCH][next] iio: adc: qcom-spmi-rradc: Fix spelling mistake "coherrency" -> "coherency"
- From: Colin Ian King <colin.i.king@xxxxxxxxx>
- Re: PM runtime_error handling missing in many drivers?
- From: Oliver Neukum <oneukum@xxxxxxxx>
- [PATCH] iio: dac: ad5380: aligned '*' each line and drop unneeded blank line
- From: Jiang Jian <jiangjian@xxxxxxxxxx>
- Re: [PATCH] iio: aligned '*' each line
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 6/8] iio: magnetometer: yas530: Rename functions and registers
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- [PATCH] iio: aligned '*' each line
- From: Jiang Jian <jiangjian@xxxxxxxxxx>
- Re: [PATCH v2 0/4] 3rd set of IIO export namespaces.
- From: Joe Simmons-Talbott <joetalbott@xxxxxxxxx>
- Re: [PATCH v2 07/15] Documentation: ABI: testing: mt6370: Add ADC sysfs guideline
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- Re: [PATCH v3 8/8] iio: magnetometer: yas530: Add YAS537 variant
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- Re: [PATCH v3 8/8] iio: magnetometer: yas530: Add YAS537 variant
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- Re: [PATCH v3 7/8] iio: magnetometer: yas530: Apply minor cleanups
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- Re: [PATCH v3 6/8] iio: magnetometer: yas530: Rename functions and registers
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- Re: [PATCH v3 5/8] iio: magnetometer: yas530: Change data type of calibration coefficients
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- Re: [PATCH v3 4/8] iio: magnetometer: yas530: Correct temperature handling
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- Re: [PATCH v3 2/8] iio: magnetometer: yas530: Change range of data in volatile register
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- Re: [PATCH v3 1/8] iio: magnetometer: yas530: Change data type of hard_offsets to signed
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- Re: [PATCH v1 1/1] iio: adc: mxs-lradc-adc: Get rid of OF specifics
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCH v1 1/1] iio: adc: mxs-lradc-adc: Get rid of OF specifics
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCH v2 16/17] iio: cdc: ad7746: Move driver out of staging.
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v2 11/17] iio: core: Introduce _inputoffset for differential channels
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 11/17] iio: core: Introduce _inputoffset for differential channels
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 16/17] iio: cdc: ad7746: Move driver out of staging.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 1/1] iio: adc: mxs-lradc-adc: Get rid of OF specifics
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 16/17] iio: cdc: ad7746: Move driver out of staging.
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v2 11/17] iio: core: Introduce _inputoffset for differential channels
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v2 07/15] Documentation: ABI: testing: mt6370: Add ADC sysfs guideline
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 16/17] iio: cdc: ad7746: Move driver out of staging.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5 2/2] iio: adc: ad4130: add AD4130 driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v2 05/17] staging: iio: cdc: ad7746: Use local buffer for multi byte reads.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 11/17] iio: core: Introduce _inputoffset for differential channels
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 00/17] staging/iio: Clean up AD7746 CDC driver and move from staging.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 02/17] iio: ABI: Fix wrong format of differential capacitance channel ABI.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 05/17] staging: iio: cdc: ad7746: Use local buffer for multi byte reads.
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v2 16/17] iio: cdc: ad7746: Move driver out of staging.
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- [PATCH v5 2/2] iio: adc: ad4130: add AD4130 driver
- From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
- [PATCH v5 1/2] dt-bindings: iio: adc: add AD4130
- From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
- [PATCH v5 0/2] AD4130
- From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
- [PATCH 1/2] iio: adc: stm32-adc: make safe adc disable
- From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
- [PATCH 0/2] iio: adc: stm32-adc: add checks on adc state
- From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
- [PATCH 2/2] iio: adc: stm32-adc: disable adc before calibration
- From: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
- Re: [PATCH v1 1/2] iio: adc: xilinx-xadc: Make use of device properties
- From: Michal Simek <michal.simek@xxxxxxx>
- PM runtime_error handling missing in many drivers?
- From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
- Re: [PATCH 2/2] staging: iio: imu: Add CEVA BNO08x driver
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: (EXT) Re: [PATCH] dt-bindings: iio: adc: Add imx6ul & imx6sx compatibles
- From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
- Re: [PULL] 1st set of IIO fixes for 5.19
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 07/15] Documentation: ABI: testing: mt6370: Add ADC sysfs guideline
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- Re: [PATCH v2 03/15] dt-bindings: leds: mt6370: Add Mediatek mt6370 current sink type LED indicator
- From: szuni chen <szunichen@xxxxxxxxx>
- Re: [PATCH v2 00/17] staging/iio: Clean up AD7746 CDC driver and move from staging.
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v2 11/17] iio: core: Introduce _inputoffset for differential channels
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v2 16/17] iio: cdc: ad7746: Move driver out of staging.
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v2 05/17] staging: iio: cdc: ad7746: Use local buffer for multi byte reads.
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v2 02/17] iio: ABI: Fix wrong format of differential capacitance channel ABI.
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- [PATCH v2 14/17] staging: iio: ad7746: White space cleanup
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v2 11/17] iio: core: Introduce _inputoffset for differential channels
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v2 12/17] staging: iio: cdc: ad7746: Switch from _offset to _inputoffset for differential channels.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v2 09/17] staging: iio: cdc: ad7746: Drop usused i2c_set_clientdata()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v2 10/17] staging: iio: cdc: ad7746: Use _raw and _scale for temperature channels.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v2 17/17] RFC: iio: cdc: ad7746: Add roadtest
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v2 16/17] iio: cdc: ad7746: Move driver out of staging.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v2 15/17] iio: cdc: ad7746: Add device specific ABI documentation.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v2 13/17] staging: iio: cdc: ad7746: Use read_avail() rather than opencoding.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v2 06/17] staging: iio: cdc: ad7746: Factor out ad7746_read_channel()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v2 08/17] staging: iio: cdc: ad7746: Break up use of chan->address and use FIELD_PREP etc
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v2 03/17] staging: iio: cdc: ad7746: Use explicit be24 handling.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v2 07/17] staging: iio: cdc: ad7764: Push locking down into case statements in read/write_raw
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v2 01/17] iio: core: Increase precision of IIO_VAL_FRACTIONAL_LOG2 when possible
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v2 02/17] iio: ABI: Fix wrong format of differential capacitance channel ABI.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v2 05/17] staging: iio: cdc: ad7746: Use local buffer for multi byte reads.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v2 00/17] staging/iio: Clean up AD7746 CDC driver and move from staging.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v2 04/17] staging: iio: cdc: ad7746: Push handling of supply voltage scale to userspace.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 06/16] dt-bindings: gpio: Add AXP192 GPIO bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- [PULL] 1st set of IIO fixes for 5.19
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 2/3] Input: adc-joystick - Add polled input device support
- From: Artur Rojek <contact@xxxxxxxxxxxxxx>
- Re: [PATCH] iio: adc: stm32-adc: Use generic_handle_domain_irq()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 2/3] Input: adc-joystick - Add polled input device support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 11/16] iio: adc: axp20x_adc: Add support for AXP192
- From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
- Re: [PATCH v3 00/16] Add support for AXP192 PMIC
- From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
- Re: [PATCH] iio: accel: mxc4005: report orientation of accelerometer
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 2/2] iio: accel: bma400: Add support for single and double tap events
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v6 1/2] dt-bindings: Document ltrf216a light sensor bindings
- From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
- Re: [PATCH v1 1/2] iio: Add new event type gesture and use direction for single and double tap
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 2/2] iio: accel: bma400: Add support for single and double tap events
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v6 2/2] iio: light: Add support for ltrf216a sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v6 1/2] dt-bindings: Document ltrf216a light sensor bindings
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 3/3] dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 14/16] power: axp20x_battery: Add constant charge current table
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 13/16] pinctrl: Add AXP192 pin control driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: Add rtq6056 support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 13/16] pinctrl: Add AXP192 pin control driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 06/16] dt-bindings: gpio: Add AXP192 GPIO bindings
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 00/16] Add support for AXP192 PMIC
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 00/16] Add support for AXP192 PMIC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 11/16] iio: adc: axp20x_adc: Add support for AXP192
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 12/16] power: supply: axp20x_usb_power: Add support for AXP192
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 11/16] iio: adc: axp20x_adc: Add support for AXP192
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 10/16] iio: adc: axp20x_adc: Minor code cleanups
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 10/16] iio: adc: axp20x_adc: Minor code cleanups
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 8/8] iio: magnetometer: yas530: Add YAS537 variant
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 09/16] regulator: axp20x: Add support for AXP192
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 08/16] mfd: axp20x: Add support for AXP192
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: Add rtq6056 support
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 8/8] iio: magnetometer: yas530: Add YAS537 variant
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: adc: Add rtq6056 adc support
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 10/16] iio: adc: axp20x_adc: Minor code cleanups
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCH v3 05/16] dt-bindings: power: supply: axp20x: Add AXP192 compatible
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCH v3 12/16] power: supply: axp20x_usb_power: Add support for AXP192
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCH v3 04/16] dt-bindings: iio: adc: axp209: Add AXP192 compatible
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCH v3 03/16] dt-bindings: mfd: add bindings for AXP192 MFD device
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCH v3 13/16] pinctrl: Add AXP192 pin control driver
- From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
- [PATCH v3 08/16] mfd: axp20x: Add support for AXP192
- From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
- [PATCH v3 15/16] power: axp20x_battery: Support battery status without fuel gauge
- From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
- [PATCH v3 05/16] dt-bindings: power: supply: axp20x: Add AXP192 compatible
- From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
- [PATCH v3 14/16] power: axp20x_battery: Add constant charge current table
- From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
- [PATCH v3 06/16] dt-bindings: gpio: Add AXP192 GPIO bindings
- From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
- [PATCH v3 04/16] dt-bindings: iio: adc: axp209: Add AXP192 compatible
- From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
- [PATCH v3 11/16] iio: adc: axp20x_adc: Add support for AXP192
- From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
- [PATCH v3 13/16] pinctrl: Add AXP192 pin control driver
- From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
- [PATCH v3 12/16] power: supply: axp20x_usb_power: Add support for AXP192
- From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
- [PATCH v3 07/16] dt-bindings: power: axp20x-battery: Add AXP192 compatible
- From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
- [PATCH v3 16/16] power: axp20x_battery: Add support for AXP192
- From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
- [PATCH v3 09/16] regulator: axp20x: Add support for AXP192
- From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
- [PATCH v3 10/16] iio: adc: axp20x_adc: Minor code cleanups
- From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
- [PATCH v3 03/16] dt-bindings: mfd: add bindings for AXP192 MFD device
- From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
- [PATCH v3 02/16] regmap-irq: Add get_irq_reg to support unusual register layouts
- From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
- [PATCH v3 01/16] regmap-irq: Use sub_irq_reg() to calculate unmask register address
- From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
- [PATCH v3 00/16] Add support for AXP192 PMIC
- From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
- Re: [PATCH v3 1/6] iio: adc: mp2629: fix wrong comparison of channel
- From: saravanan sekar <sravanhome@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: adc: Add rtq6056 adc support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: adc: Add rtq6056 adc support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 20/34] iio: inkern: only relase the device node when done with it
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [v6 08/14] iio: imu: add Bosch Sensortec BNO055 core driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: adc: Add rtq6056 adc support
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: iio: adc: Add imx6ul & imx6sx compatibles
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] proximity: vl53l0x: Make VDD regulator actually optional
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio:proximity:sx9324: Check ret value of device_property_read_u32_array()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] MAINTAINERS: add include/dt-bindings/iio to IIO SUBSYSTEM AND DRIVERS
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] iio: accel: mma8452: ignore the return value of reset operation
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: iio/accel: Fix adi,adxl345/6 example I2C address
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/6] iio: adc: mp2629: fix wrong comparison of channel
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v14 00/10] iio: adc: introduce Qualcomm SPMI Round Robin ADC
- From: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
- Re: [PATCH v3 4/6] iio: adc: mp2629: restrict input voltage mask for mp2629
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 11/15] iio: adc: mt6370: Add Mediatek MT6370 support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: adc: Add rtq6056 adc support
- From: ChiYuan Huang <u0084500@xxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: Add rtq6056 support
- From: ChiYuan Huang <u0084500@xxxxxxxxx>
- Re: [PATCH v2 08/15] mfd: mt6370: Add Mediatek MT6370 support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 07/15] Documentation: ABI: testing: mt6370: Add ADC sysfs guideline
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: Fix typo in comment
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 1/1] iio: dac: stm32-dac: Replace open coded str_enable_disable()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 1/1] iio: accel: mma7660: Drop wrong use of ACPI_PTR()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 8/8] iio: magnetometer: yas530: Add YAS537 variant
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: Add rtq6056 support
- From: ChiYuan Huang <u0084500@xxxxxxxxx>
- Re: [PATCH v3 6/8] iio: magnetometer: yas530: Rename functions and registers
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 5/8] iio: magnetometer: yas530: Change data type of calibration coefficients
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 4/8] iio: magnetometer: yas530: Correct temperature handling
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 2/8] iio: magnetometer: yas530: Change range of data in volatile register
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/8] iio: magnetometer: yas530: Change data type of hard_offsets to signed
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 7/7] iio: magnetometer: yas530: Add YAS537 variant
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 22/34] iio: inkern: only return error codes in iio_channel_get_*() APIs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio:light:tsl2563: Replace cancel_delayed_work() with cancel_delayed_work_sync().
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] iio:light:tsl2563: Replace flush_scheduled_work() with cancel_delayed_work_sync().
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 2/2] iio: adc: ad4130: add AD4130 driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3] iio: trigger: warn about non-registered iio trigger getting attempt
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 0/4] 3rd set of IIO export namespaces.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v14 00/10] iio: adc: introduce Qualcomm SPMI Round Robin ADC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v14 00/10] iio: adc: introduce Qualcomm SPMI Round Robin ADC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v14 02/10] mfd: qcom-spmi-pmic: expose the PMIC revid information to clients
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 8/8] iio: magnetometer: yas530: Add YAS537 variant
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 7/8] iio: magnetometer: yas530: Apply minor cleanups
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- RE: Intel Timed-IO driver in IIO/Counter subsystem
- From: "Hall, Christopher S" <christopher.s.hall@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: adc: Add rtq6056 adc support
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- RE: Intel Timed-IO driver in IIO/Counter subsystem
- From: "Hall, Christopher S" <christopher.s.hall@xxxxxxxxx>
- [PATCH v3 8/8] iio: magnetometer: yas530: Add YAS537 variant
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- [PATCH v3 6/8] iio: magnetometer: yas530: Rename functions and registers
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- [PATCH v3 7/8] iio: magnetometer: yas530: Apply minor cleanups
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- [PATCH v3 5/8] iio: magnetometer: yas530: Change data type of calibration coefficients
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- [PATCH v3 4/8] iio: magnetometer: yas530: Correct temperature handling
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- [PATCH v3 3/8] iio: magnetometer: yas530: Correct scaling of magnetic axes
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- [PATCH v3 2/8] iio: magnetometer: yas530: Change range of data in volatile register
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- [PATCH v3 1/8] iio: magnetometer: yas530: Change data type of hard_offsets to signed
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- [PATCH v3 0/8] Add support for magnetometer Yamaha YAS537
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- Re: [PATCH v2 05/15] dt-bindings: backlight: Add Mediatek MT6370 backlight
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 02/15] dt-bindings: power: supply: Add Mediatek MT6370 Charger
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: iio: adc: Add imx6ul & imx6sx compatibles
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 06/15] dt-bindings: mfd: Add Mediatek MT6370
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 2/2] staging: iio: imu: Add CEVA BNO08x driver
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH 2/2] staging: iio: imu: Add CEVA BNO08x driver
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v2 08/15] mfd: mt6370: Add Mediatek MT6370 support
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- Re: Intel Timed-IO driver in IIO/Counter subsystem
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: Add rtq6056 support
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: Add rtq6056 support
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 32/34] iio: adc: stm32-adc: convert to device properties
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
- Re: [PATCH 10/10] pinctrl: Add AXP192 pin control driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- [PATCH] iio: adc: Fix refcount leak bug in aspeed_adc
- From: Liang He <windhl@xxxxxxx>
- Re: [PATCH v3 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
- From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
- Re: Intel Timed-IO driver in IIO/Counter subsystem
- From: William Breathitt Gray <william.gray@xxxxxxxxxx>
- Re: [PATCH 10/10] pinctrl: Add AXP192 pin control driver
- From: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
- Re: Intel Timed-IO driver in IIO/Counter subsystem
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v2 06/15] dt-bindings: mfd: Add Mediatek MT6370
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- Re: [PATCH v2 06/15] dt-bindings: mfd: Add Mediatek MT6370
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- Re: [PATCH v2 05/15] dt-bindings: backlight: Add Mediatek MT6370 backlight
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- Re: [PATCH v2 02/15] dt-bindings: power: supply: Add Mediatek MT6370 Charger
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- Re: Intel Timed-IO driver in IIO/Counter subsystem
- From: "Shevchenko, Andriy" <andriy.shevchenko@xxxxxxxxx>
- Re: [PATCH v2 15/15] video: backlight: mt6370: Add Mediatek MT6370 support
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- [PATCH 2/2] iio: adc: Add rtq6056 support
- From: cy_huang <u0084500@xxxxxxxxx>
- [PATCH 1/2] dt-bindings: iio: adc: Add rtq6056 adc support
- From: cy_huang <u0084500@xxxxxxxxx>
- [PATCH 0/2] Add Richtek RTQ6056 support
- From: cy_huang <u0084500@xxxxxxxxx>
- Re: [PATCH v2 11/15] iio: adc: mt6370: Add Mediatek MT6370 support
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- Re: [PATCH v2 10/15] regulator: mt6370: Add mt6370 DisplayBias and VibLDO support
- From: ChiaEn Wu <peterwu.pub@xxxxxxxxx>
- Re: Intel Timed-IO driver in IIO/Counter subsystem
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Intel Timed-IO driver in IIO/Counter subsystem
- From: "N, Pandith" <pandith.n@xxxxxxxxx>
- Recall: Intel Timed-IO driver in IIO/Counter subsystem
- From: "N, Pandith" <pandith.n@xxxxxxxxx>
- [PATCH v1 1/1] iio: dac: stm32-dac: Replace open coded str_enable_disable()
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 06/15] dt-bindings: mfd: Add Mediatek MT6370
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 05/15] dt-bindings: backlight: Add Mediatek MT6370 backlight
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 04/15] dt-bindings: leds: Add Mediatek MT6370 flashlight
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 03/15] dt-bindings: leds: mt6370: Add Mediatek mt6370 current sink type LED indicator
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 01/15] dt-bindings: usb: Add Mediatek MT6370 TCPC
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 02/15] dt-bindings: power: supply: Add Mediatek MT6370 Charger
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v3 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
- From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
- Re: [PATCH 12/16] dt-bindings: iio: adc: at91-sama5d2_adc: add id for temperature channel
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v1 1/1] iio: accel: mma7660: Drop wrong use of ACPI_PTR()
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH] iio: Fix typo in comment
- From: Xiang wangx <wangxiang@xxxxxxxxxx>
- Re: [PATCH v3] iio: trigger: warn about non-registered iio trigger getting attempt
- From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] iio: adc: stx104: Implement and utilize register structures
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH 31/34] iio: adc: qcom-spmi-adc5: convert to device properties
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 30/34] iio: adc: qcom-spmi-vadc: convert to device properties
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 2/2] staging: iio: imu: Add CEVA BNO08x driver
- From: Jacopo Mondi <jacopo@xxxxxxxxxx>
- Re: [PATCH v3 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 2/2] staging: iio: imu: Add CEVA BNO08x driver
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH 2/2] staging: iio: imu: Add CEVA BNO08x driver
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH v3 3/3] dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver
- From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
- [PATCH v3 2/3] iio: add MEMSensing MSA311 3-axis accelerometer driver
- From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
- [PATCH v3 1/3] dt-bindings: vendor-prefixes: add MEMSensing Microsystems Co., Ltd.
- From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
- [PATCH v3 0/3] iio: accel: add MSA311 accelerometer driver
- From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] staging: iio: imu: Add CEVA BNO08x driver
- From: Jacopo Mondi <jacopo@xxxxxxxxxx>
- Re: [PATCH 2/2] staging: iio: imu: Add CEVA BNO08x driver
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH 2/2] staging: iio: imu: Add CEVA BNO08x driver
- From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
- [PATCH 1/2] dt-bindings: staging: iio: imu: Document CEVA BNO08x
- From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
- [PATCH 0/2] staging: iio: imu: Add CEVA BNO08x through the staging tree
- From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
- Re: [PATCH v3] iio: trigger: warn about non-registered iio trigger getting attempt
- From: Dmitry Rokosov <DDRokosov@xxxxxxxxxxxxxx>
- RE: [PATCH v2] iio: accel: mma8452: ignore the return value of reset operation
- From: Bough Chen <haibo.chen@xxxxxxx>
- [PATCH] dt-bindings: iio/accel: Fix adi,adxl345/6 example I2C address
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH 2/6] dt-bindings: mfd: Add mp2733 compatible
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH v2 08/15] mfd: mt6370: Add Mediatek MT6370 support
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH v2 7/7] iio: magnetometer: yas530: Add YAS537 variant
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- Re: [PATCH v2 7/7] iio: magnetometer: yas530: Add YAS537 variant
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- Re: [PATCH v2 7/7] iio: magnetometer: yas530: Add YAS537 variant
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- Re: [PATCH v14 02/10] mfd: qcom-spmi-pmic: expose the PMIC revid information to clients
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH v14 03/10] mfd: qcom-spmi-pmic: read fab id on supported PMICs
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [v6 12/14] iio: imu: add BNO055 serdev driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v2 4/7] iio: magnetometer: yas530: Correct temperature handling
- From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
- Re: [v6 12/14] iio: imu: add BNO055 serdev driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v1 1/1] iio: adc: intel_mrfld_adc: explicitly add proper header files
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] iio: accel: mma8452: ignore the return value of reset operation
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [v6 12/14] iio: imu: add BNO055 serdev driver
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v1 1/1] iio: adc: intel_mrfld_adc: explicitly add proper header files
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 10/10] pinctrl: Add AXP192 pin control driver
- From: Michael Walle <michael@xxxxxxxx>
- Re: [PATCH v6 1/2] dt-bindings: Document ltrf216a light sensor bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v6 2/2] iio: light: Add support for ltrf216a sensor
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v2] iio: accel: mma8452: ignore the return value of reset operation
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v3 4/6] iio: adc: mp2629: restrict input voltage mask for mp2629
- From: Saravanan Sekar <sravanhome@xxxxxxxxx>
- [PATCH v3 3/6] mfd: mp2629: Add support for mps mp2733 battery charger
- From: Saravanan Sekar <sravanhome@xxxxxxxxx>
- [PATCH v3 2/6] dt-bindings: mfd: Add mp2733 compatible
- From: Saravanan Sekar <sravanhome@xxxxxxxxx>
- [PATCH v3 5/6] power: supply: Add support for mp2733 battery charger
- From: Saravanan Sekar <sravanhome@xxxxxxxxx>
- [PATCH v3 6/6] power: supply: mp2629: Add USB fast charge settings
- From: Saravanan Sekar <sravanhome@xxxxxxxxx>
- [PATCH v3 1/6] iio: adc: mp2629: fix wrong comparison of channel
- From: Saravanan Sekar <sravanhome@xxxxxxxxx>
- [PATCH v3 0/6] Add support for mp2733 battery charger
- From: Saravanan Sekar <sravanhome@xxxxxxxxx>
- Re: [PATCH 10/10] pinctrl: Add AXP192 pin control driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 27/34] iio: adc: ab8500-gpadc: convert to device properties
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 29/34] iio: adc: qcom-pm8xxx-xoadc: convert to device properties
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v6 1/2] dt-bindings: Document ltrf216a light sensor bindings
- From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
- [PATCH v6 2/2] iio: light: Add support for ltrf216a sensor
- From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
- [PATCH v6 0/2] Add LTRF216A Driver
- From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
- Re: [PATCH 10/10] pinctrl: Add AXP192 pin control driver
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 1/2] iio: adc: stx104: Implement and utilize register structures
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: iio: adc: add AD4130
- From: Cosmin Tanislav <demonsingur@xxxxxxxxx>
- Re: [PATCH 1/2] iio: adc: stx104: Implement and utilize register structures
- From: William Breathitt Gray <william.gray@xxxxxxxxxx>
- RE: [PATCH v1 1/1] iio: adc: intel_mrfld_adc: explicitly add proper header files
- From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
- [PATCH v1 1/1] iio: adc: intel_mrfld_adc: explicitly add proper header files
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] iio: adc: stx104: Implement and utilize register structures
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 1/2] iio: adc: stx104: Implement and utilize register structures
- From: William Breathitt Gray <william.gray@xxxxxxxxxx>
- [PATCH v2 1/2] iio: proximity: sx_common: Don't use IIO device for properties
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2 2/2] iio: proximity: sx_common: Allow IIO core to take care of firmware node
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v2] iio: accel: mma8452: ignore the return value of reset operation
- RE: [PATCH] iio: accel: mma8452: remove the reset operation during driver probe
- From: Bough Chen <haibo.chen@xxxxxxx>
- [PATCH] iio: accel: mxc4005: report orientation of accelerometer
- From: Quentin Schulz <foss+kernel@xxxxxxxxx>
- Re: [PATCH v2 1/6] iio: adc: mp2629: fix wrong comparison of channel
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v2 4/6] iio: adc: mp2629: restrict input voltage mask for mp2629
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v2 6/6] power: supply: mp2629: Add usb fast charge settings
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v2 3/6] mfd: mp2629: Add support for mps mp2733 battery charger
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 1/2] iio: adc: stx104: Implement and utilize register structures
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v2 2/6] dt-bindings: mfd: Add mp2733 compatible
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 2/6] dt-bindings: mfd: Add mp2733 compatible
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v2 6/6] power: supply: mp2629: Add usb fast charge settings
- From: Saravanan Sekar <sravanhome@xxxxxxxxx>
- [PATCH v2 5/6] power: supply: Add support for mp2733 battery charger
- From: Saravanan Sekar <sravanhome@xxxxxxxxx>
- [PATCH v2 4/6] iio: adc: mp2629: restrict input voltage mask for mp2629
- From: Saravanan Sekar <sravanhome@xxxxxxxxx>
- [PATCH v2 3/6] mfd: mp2629: Add support for mps mp2733 battery charger
- From: Saravanan Sekar <sravanhome@xxxxxxxxx>
- [PATCH v2 1/6] iio: adc: mp2629: fix wrong comparison of channel
- From: Saravanan Sekar <sravanhome@xxxxxxxxx>
- [PATCH v2 2/6] dt-bindings: mfd: Add mp2733 compatible
- From: Saravanan Sekar <sravanhome@xxxxxxxxx>
- Re: [PATCH v1 2/2] iio: accel: bma400: Add support for single and double tap events
- From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
- Re: [PATCH 3/6] mfd: mp2629: Add support for mps mp2733 battery charger
- From: saravanan sekar <sravanhome@xxxxxxxxx>
- Re: [PATCH 2/2] iio: dac: cio-dac: Implement and utilize register structures
- From: William Breathitt Gray <william.gray@xxxxxxxxxx>
- Re: [PATCH 6/6] power: supply: mp2629: Add usb fast charge settings
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 5/6] power: supply: Add support for mp2733 battery charger
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 1/2] iio: adc: stx104: Implement and utilize register structures
- From: William Breathitt Gray <william.gray@xxxxxxxxxx>
- Re: [PATCH] counter: 104-quad-8: Implement and utilize register structures
- From: William Breathitt Gray <william.gray@xxxxxxxxxx>
- Re: [PATCH 4/6] iio: adc: mp2629: restrict input voltage mask for mp2629
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH 3/6] mfd: mp2629: Add support for mps mp2733 battery charger
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [v6 08/14] iio: imu: add Bosch Sensortec BNO055 core driver
- From: Andrea Merello <andrea.merello@xxxxxxxxx>
- [PATCH 4/6] iio: adc: mp2629: restrict input voltage mask for mp2629
- From: Saravanan Sekar <sravanhome@xxxxxxxxx>
- [PATCH 1/6] iio: adc: mp2629: fix wrong comparison of channel
- From: Saravanan Sekar <sravanhome@xxxxxxxxx>
- [PATCH 2/6] dt-bindings: mfd: Add mp2733 compatible
- From: Saravanan Sekar <sravanhome@xxxxxxxxx>
- [PATCH 3/6] mfd: mp2629: Add support for mps mp2733 battery charger
- From: Saravanan Sekar <sravanhome@xxxxxxxxx>
- [PATCH 5/6] power: supply: Add support for mp2733 battery charger
- From: Saravanan Sekar <sravanhome@xxxxxxxxx>
- [PATCH 6/6] power: supply: mp2629: Add usb fast charge settings
- From: Saravanan Sekar <sravanhome@xxxxxxxxx>
- Re: [v6 08/14] iio: imu: add Bosch Sensortec BNO055 core driver
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- [v6 14/14] docs: iio: add documentation for BNO055 driver
- From: <andrea.merello@xxxxxx>
- [v6 04/14] iio: add modifers for pitch, yaw, roll
- From: <andrea.merello@xxxxxx>
- Re: [v6 08/14] iio: imu: add Bosch Sensortec BNO055 core driver
- From: Andrea Merello <Andrea.Merello@xxxxxx>
- [v6 12/14] iio: imu: add BNO055 serdev driver
- From: <andrea.merello@xxxxxx>
- [v6 02/14] iio: document linear acceleration modifiers
- From: <andrea.merello@xxxxxx>
- [v6 00/14] Add support for Bosch BNO055 IMU
- From: <andrea.merello@xxxxxx>
- [v6 06/14] iio: event_monitor: add pitch, yaw and roll modifiers
- From: <andrea.merello@xxxxxx>
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Scanners]
[Yosemite Forum]