In case triggered buffers are enabled while system is suspended they will
not work anymore after resume. For this call at91_adc_buffer_postdisable()
on suspend and at91_adc_buffer_prepare() on resume. On tests it has been
seen that at91_adc_buffer_postdisable() call is not necessary but it has
been kept because it also does the book keeping for DMA. On resume path
there is no need to call at91_adc_configure_touch() as it is embedded in
at91_adc_buffer_prepare().
Fixes: 073c662017f2f ("iio: adc: at91-sama5d2_adc: add support for DMA")
Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
---
drivers/iio/adc/at91-sama5d2_adc.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index 40a95d2fd5c8..2c087d52f164 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -2116,6 +2116,9 @@ static __maybe_unused int at91_adc_suspend(struct device *dev)
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct at91_adc_state *st = iio_priv(indio_dev);
+ if (iio_buffer_enabled(indio_dev))
+ at91_adc_buffer_postdisable(indio_dev);
+
/*
* Do a sofware reset of the ADC before we go to suspend.
* this will ensure that all pins are free from being muxed by the ADC
@@ -2159,14 +2162,11 @@ static __maybe_unused int at91_adc_resume(struct device *dev)
if (!iio_buffer_enabled(indio_dev))
return 0;
- /* check if we are enabling triggered buffer or the touchscreen */
- if (at91_adc_current_chan_is_touch(indio_dev))
- return at91_adc_configure_touch(st, true);
- else
- return at91_adc_configure_trigger(st->trig, true);
+ ret = at91_adc_buffer_prepare(indio_dev);
+ if (ret)
+ goto vref_disable_resume;
- /* not needed but more explicit */
- return 0;
+ return at91_adc_configure_trigger(st->trig, true);
vref_disable_resume:
regulator_disable(st->vref);
--
2.34.1
