[PATCH v3 05/14] dt-bindings: backlight: Add Mediatek MT6370 backlight

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>

Add mt6370 backlight binding documentation.

Signed-off-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
---

v3
- Rename "mediatek,bled-pwm-hys-input-threshold-steps" to
  "mediatek,bled-pwm-hys-input-th-steps"
- Refine "bled-pwm-hys-input-th-steps", "bled-ovp-microvolt",
  "bled-ocp-microamp" enum values
---
 .../leds/backlight/mediatek,mt6370-backlight.yaml  | 92 ++++++++++++++++++++++
 1 file changed, 92 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml

diff --git a/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
new file mode 100644
index 0000000..26563ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/mediatek,mt6370-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6370 Backlight
+
+maintainers:
+  - ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>
+
+description: |
+  This module is part of the MT6370 MFD device.
+  The MT6370 Backlight WLED driver supports up to a 29V output voltage for
+  4 channels of 8 series WLEDs. Each channel supports up to 30mA of current
+  capability with 2048 current steps (11 bits) in exponential or linear
+  mapping curves.
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    const: mediatek,mt6370-backlight
+
+  default-brightness:
+    minimum: 0
+    maximum: 2048
+
+  max-brightness:
+    minimum: 0
+    maximum: 2048
+
+  enable-gpios:
+    description: External backlight 'enable' pin
+    maxItems: 1
+
+  mediatek,bled-pwm-enable:
+    description: |
+      Enable external PWM input for backlight dimming
+    type: boolean
+
+  mediatek,bled-pwm-hys-enable:
+    description: |
+      Enable the backlight input-hysteresis for PWM mode
+    type: boolean
+
+  mediatek,bled-pwm-hys-input-th-steps:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [1, 4, 16, 64]
+    description: |
+      The selection of the upper and lower bounds threshold of backlight
+      PWM resolution. If we choose selection 64, the variation of PWM
+      resolution needs over than 64 steps.
+
+  mediatek,bled-ovp-shutdown:
+    description: |
+      Enable the backlight shutdown when OVP level triggered
+    type: boolean
+
+  mediatek,bled-ovp-microvolt:
+    enum: [17000000, 21000000, 25000000, 29000000]
+    description: |
+      Backlight OVP level selection.
+
+  mediatek,bled-ocp-shutdown:
+    description: |
+      Enable the backlight shutdown when OCP level triggerred.
+    type: boolean
+
+  mediatek,bled-ocp-microamp:
+    enum: [900000, 1200000, 1500000, 1800000]
+    description: |
+      Backlight OC level selection.
+
+  mediatek,bled-channel-use:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      Backlight LED channel to be used.
+      Each bit mapping to:
+        - 0: CH4
+        - 1: CH3
+        - 2: CH2
+        - 3: CH1
+    minimum: 1
+    maximum: 15
+
+required:
+  - compatible
+  - mediatek,bled-channel-use
+
+additionalProperties: false
-- 
2.7.4




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux