From: Cosmin Tanislav <cosmin.tanislav@xxxxxxxxxx> Add support for the following parts: * LTC2984 * LTC2986 * LTM2985 The LTC2984 is a variant of the LTC2983 with EEPROM. The LTC2986 is a variant of the LTC2983 with only 10 channels, EEPROM and support for active analog temperature sensors. The LTM2985 is software-compatible with the LTC2986. Signed-off-by: Cosmin Tanislav <cosmin.tanislav@xxxxxxxxxx> --- .../bindings/iio/temperature/adi,ltc2983.yaml | 69 +++++++++++++++++-- 1 file changed, 65 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml index 3e97ec841fd6..1cb31d896c9a 100644 --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -4,19 +4,30 @@ $id: http://devicetree.org/schemas/iio/temperature/adi,ltc2983.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Analog Devices LTC2983 Multi-sensor Temperature system +title: Analog Devices LTC2983, LTC2986, LTM2985 Multi-sensor Temperature system maintainers: - Nuno Sá <nuno.sa@xxxxxxxxxx> description: | - Analog Devices LTC2983 Multi-Sensor Digital Temperature Measurement System + Analog Devices LTC2983, LTC2984, LTC2986, LTM2985 Multi-Sensor Digital + Temperature Measurement Systems + https://www.analog.com/media/en/technical-documentation/data-sheets/2983fc.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/2984fb.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/29861fa.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ltm2985.pdf properties: compatible: - enum: - - adi,ltc2983 + oneOf: + - enum: + - adi,ltc2983 + - adi,ltc2986 + - adi,ltm2985 + - items: + - const: adi,ltc2984 + - const: adi,ltc2983 reg: maxItems: 1 @@ -413,6 +424,44 @@ patternProperties: reg: minimum: 1 + "^temp@": + type: object + description: Active analog temperature sensor. + properties: + adi,sensor-type: + description: Sensor type for active analog temperature sensors. + $ref: /schemas/types.yaml#/definitions/uint32 + const: 31 + + adi,single-ended: + description: Whether the sensor is single-ended. + type: boolean + + adi,custom-temp: + description: + Used for digitizing active analog temperature sensors. + See Page 67 of the LTM2985 datasheet. + $ref: /schemas/types.yaml#/definitions/uint64-matrix + minItems: 3 + maxItems: 64 + items: + items: + - description: Voltage point in nV, signed. + - description: Temperature point in uK. + + required: + - adi,custom-temp + + allOf: + - if: + properties: + adi,single-ended: + const: true + then: + properties: + reg: + minimum: 1 + "^rsense@": type: object description: Sense resistor sensor. @@ -439,6 +488,18 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - adi,ltc2983 + - adi,ltc2984 + then: + patternProperties: + "^temp@": false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> -- 2.38.1
