Use i2c_client_get_device_id() to get the i2c_device_id* parameter in the
.new_probe() callback.
Signed-off-by: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
---
drivers/iio/pressure/bmp280-i2c.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/iio/pressure/bmp280-i2c.c b/drivers/iio/pressure/bmp280-i2c.c
index 0c27211f3ea0..20073b09b3e3 100644
--- a/drivers/iio/pressure/bmp280-i2c.c
+++ b/drivers/iio/pressure/bmp280-i2c.c
@@ -5,11 +5,11 @@
#include "bmp280.h"
-static int bmp280_i2c_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int bmp280_i2c_probe(struct i2c_client *client)
{
- struct regmap *regmap;
+ const struct i2c_device_id *id = i2c_client_get_device_id(client);
const struct regmap_config *regmap_config;
+ struct regmap *regmap;
switch (id->driver_data) {
case BMP180_CHIP_ID:
@@ -65,7 +65,7 @@ static struct i2c_driver bmp280_i2c_driver = {
.of_match_table = bmp280_of_i2c_match,
.pm = pm_ptr(&bmp280_dev_pm_ops),
},
- .probe = bmp280_i2c_probe,
+ .probe_new = bmp280_i2c_probe,
.id_table = bmp280_i2c_id,
};
module_i2c_driver(bmp280_i2c_driver);
--
2.38.1
